Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data catalog”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

IRAS observations of BL Lac objects

IRAS data was analyzed for 35 BL Lac objects selected from a complete 5 GHz radio sample, using the coadded survey database. The detection rate is 50% with more than 40% detected in more than one band. This compares with only 15% of these sources that are included in the IRAS Point Source Catalog. High luminosity BL Lac objects generally have smooth energy spectra over four or five decades in frequency, consistent with incoherent synchrotron emission from 1 cm to 1 micron. However, many low luminosity BL Lac objects have discontinuous spectra, with a large range in the spectral index at IRAS wavelengths. For BL Lacs with a total luminosity of less than 10 to the 44th power ergs/-s, most of the far infrared energy probably originates from dust heated near the galaxy nucleus. The energy budget shows that the majority of the power per unit bandwidth emerges in the infrared (1 to 100 microns).

Impey, C.↗

Smithsonian Astrophysical Observatory (SAO) star catalog (Sao staff 1966, edition ADC 1989): Documentation for the machine-readable version

An updated, corrected, and extended machine readable version of the catalog is described. Published and unpublished errors discovered in the previous version were corrected, and multiple star and supplemental BD identifications were added to stars where more than one SAO entry has the same Durchmusterung number. Henry Draper Extension (HDE) numbers were added for stars found in both volumes of the extension. Data for duplicate SAO entries (those referring to the same star) were flagged. J2000 positions in usual units and in radians were added.

Roman, Nancy G.↗

Preliminary Characterization Results from the DebriSat Project

The DebriSat project is a continuing effort sponsored by NASA and DoD to update existing break-up models using data obtained from two separate hypervelocity impact tests used to simulate on-orbit collisions. To protect the fragments resulting from the impact tests, "soft-catch" arenas made of polyurethane foam panels were utilized. After each impact test, the test chamber was cleaned and debris resulting from the catastrophic demise of the test article were collected and shipped to the University of Florida for post-impact processing. The post-impact processing activities include collecting, characterizing, and cataloging of the fragments. Since the impact tests, a team of students has been working to characterize the fragments in terms of their mass, size, shape, color and material content. The focus of the 20 months since the impact tests has been on the collection of 2 millimeters- and larger fragments resulting from impact test on the 56 kilogram-representative LEO (Low Earth Orbit) satellite referred to as DebriSat. To date we have recovered in excess of 115,000 fragments, 30,000 more than the prediction of 85,000 fragments from the existing model. We continue to collect fragments but have transitioned to the characterization phase of the post-impact activities. Since the start of the characterization phase, the focus has been to utilize automation to (i) expedite fragment characterization process and (ii) minimize human-in-the- loop. We have developed and implemented such automated processes; e.g., we have automated the data entry process to reduce operator errors during transcription of the measurement data. However, at all steps of the process, there is human oversight to ensure the integrity of the data. Additionally, we have developed and implemented repeatability and reproducibility tests to ensure that the instrumentation used in the characterization process is accurate and properly calibrated. In this paper, the implemented processes are described and preliminary results presented. Additionally, lessons learned from the implemented automations and their impacts on the integrity of the results are discussed.

Rivero, M.↗

The 1995 Atmospheric Trace Molecule Spectroscopy (ATMOS) Linelist

The Atmospheric Trace Molecule Spectroscopy (ATMOS) experiment uses a Fourier transform spectrometer on board the space shuttle to record infrared solar occultation spectra of the atmosphere. Described are the current version of the molecular spectroscopic database used for the analysis of the data obtained during three Space Shuttle missions between 1992 and 1994.

molecular database↗

Optical follow-up observation for GW event S190510g using Subaru/Hyper Suprime-Cam

Abstract A gravitational wave event, S190510g, which was classified as a binary-neutron-star coalescence at the time of preliminary alert, was detected by LIGO/Virgo collaboration on 2019 May 10. At 1.7 hours after the issue of its preliminary alert, we started a target-of-opportunity imaging observation in the Y band to search for its optical counterpart using the Hyper Suprime-Cam (HSC) on the Subaru Telescope. The observation covers a 118.8 deg2 sky area corresponding to $11.6\%$ confidence in the localization skymap released in the preliminary alert and $1.2\%$ in the updated skymap. We divided the observed area into two fields based on the availability of HSC reference images. For the fields with the HSC reference images, we applied an image subtraction technique; for the fields without the HSC reference images, we sought individual HSC images by matching a catalog of observed objects with the PS1 catalog. The search depth is 22.28 mag in the former method and the limit of search depth is 21.3 mag in the latter method. Subsequently, we performed visual inspection and obtained 83 candidates using the former method and 50 candidates using the latter method. Since we only have the one-day photometric data, we evaluated the probability of candidates being located inside the 3D skymap by estimating their distances with photometry of associated extended objects. We found three candidates are likely located inside the 3D skymap and concluded they could be a counterpart of S190510g, while most of the 133 candidates were likely to be supernovae because the number density of candidates was consistent with the expected number of supernova detections. By comparing our observational depth with a light-curve model of such a kilonova reproducing AT2017gfo, we show that early deep observations with the Subaru/HSC can capture the rising phase of the blue component of a kilonova at the estimated distance of S190510g (∼230 Mpc).

79 ASTRONOMY AND ASTROPHYSICS↗

Natural Language Processing for Text Based Event Extraction: Identifying Events of Interest Related to Worldwide State-Sponsored Civil Nuclear Power

Beginning in FY20, SRNL was funded by the National Nuclear Security Administration’s Office of Defense Nuclear Non-Proliferation Research and Development to develop a prototype natural language processing/natural language understating machine learning-based modeling and analysis pipeline to extract and forecast events of interest from massive open data sources. The working hypothesis within the approach is that contextual shifts in key words and phrases act as indicators of events of interest over time. Therefore, by identifying points in time where contextual shifts occur, events of interest can be extracted along with explicit and implicit connections of entities and activities. The development of the preliminary prototype pipeline proved successful, meriting further testing of the pipeline on more broad topical domains and in a worldwide data environment. Therefore, SRNL, in collaboration with the Sanghani Center for Artificial Intelligence and Data Analytics at Virginia Tech, have continued development with a test case of identifying events of interest related to worldwide state-sponsored civil nuclear power in open data sources. In the first year of this follow-on effort, the team has curated domain-specific data corpuses using an automated scheme and applied the modeling and analysis pipeline. This robust, focused, and efficient approach consists of an ensemble of analyses applied to time dependent word embedding models that are trained on the data corpuses. In this report, the team has demonstrated the capability of the existing pipeline (as development has continued in parallel) by exploring several specific case-studies centered around Rosatom’s international activities regarding the planning, construction, operation, and/or shutdown of nuclear reactors. A basic timeline events has been generated by manually cataloging known “milestone” events that have occurred at reactors in Turkey, Finland, Hungary, and Egypt and compared with the output of the modeling pipeline. In this approach, the team has characterized the lead time using the prototype pipeline, as well as the ability to capture relevant information, which proved 100% successful. A deep dive example of the Akkuyu reactor (Turkey) is presented that shows the breadth of information that can be captured using the approach. In this case study, events were extracted pertaining to the planning/construction of Akkuyu including protests from the population, information campaigns in response to the protests, forged regulatory documents and lawsuits, budgetary/shareholder information, geopolitical tensions, and the various construction milestones. This has demonstrated the pipeline’s utility as a research aid or real-time event extraction tool, where summary-level information and detailed text extractions from millions of articles or Tweets across long time periods can be generated with significantly less effort than current techniques.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Backup Program of the Dark Energy Spectroscopic Instrument’s Milky Way Survey

The Milky Way Backup Program (MWBP), a survey currently underway with the Dark Energy Spectroscopic Instrument (DESI) on the Nicholas U. Mayall 4 m Telescope, works at the margins of the DESI Main surveys to obtain spectra of millions of additional stars from the Gaia catalog. Efficiently utilizing times between ∼12° and 18° twilight and poor weather conditions, the MWBP extends the range of stellar sources studied to both brighter magnitudes and lower Galactic latitude and declination than the stars studied in DESI’s Main Milky Way Survey. While the MWBP prioritizes candidate giant stars selected from the Gaia catalog (using color and parallax criteria), it also includes an unbiased sample of bright stars (i.e., 11.2 ≲ G < 16 mag) as well as fainter sources (to G ≲ 19 mag). As of 2025 March 1, the survey had obtained spectra of ∼7 million stars, approximately 1.2 million of which are included in the DESI Data Release 1. The DESI spectra cover the wavelength range from 3600 to 9800 Å at a resolution λ/Δλ varying from 2000 to 5000. The full survey, when completed, will cover an area of more than 21,000 deg 2 and include approximately 10 million Gaia sources, roughly equal to the number of stellar spectra obtained through the DESI Main Survey, while only utilizing ≈9% of all DESI observing time. This paper provides an overview of the MWBP, describing the target selection, observing strategy, and an introduction to the resulting data.

79 ASTRONOMY AND ASTROPHYSICS↗

A star camera aspect system suitable for use in balloon experiments

A balloon-borne experiment containing a star camera aspect system was designed, built, and flown. This system was designed to provide offset corrections to the magnetometer and inclinometer readings used to control an azimuth and elevation pointed experiment. The camera is controlled by a microprocessor, including commendable exposure and noise rejection threshold, as well as formatting the data for telemetry to the ground. As a background program, the microprocessor runs the aspect program to analyze a fraction of the pictures taken so that aspect information and offset corrections are available to the experiment in near real time. The analysis consists of pattern recognition of the star field with a star catalog in ROM memory and a least squares calculation. The performance of this system in ground based tests is described. It is part of the NASA/GSFC High Energy Gamma-Ray Balloon Instrument (2).

Hunter, S. D.↗

Searching for Low-mass Population III Stars Disguised as White Dwarfs

It is uncertain whether or not low-mass Population III stars ever existed. While limits on the number density of Population III stars with M {sub *} ≈ 0.8 M {sub ⊙} have been derived, using Sloan Digital Sky Survey (SDSS) data, little is known about the occurrence of Population III stars at lower masses. In the absence of reliable parallaxes, the spectra of metal-poor main-sequence (MPMS) stars with M {sub *} ≲ 0.8 M {sub ⊙} can easily be confused with those of cool white dwarfs. To resolve this ambiguity, in this paper we present a classifier that differentiates between MPMS stars and white dwarfs, based on photometry and/or spectroscopy without the use of parallax information. We build and train our classifier using state-of-the-art theoretical spectra, and evaluate it on existing SDSS-based classifications for objects with reliable Gaia DR2 parallaxes. We then apply our classifier to a large catalog of objects with SDSS photometry and spectroscopy to search for MPMS candidates. We discover several previously unknown, extremely metal-poor (EMP) candidate stars, and recover numerous confirmed EMP stars already noted in the literature. We conclude that archival SDSS spectroscopy has already been exhaustively searched for EMP stars. We predict that the lowest-mass stars of primordial composition will have redder optical-to-infrared colors than cool white dwarfs at constant effective temperature, due to surface gravity-dependent collision-induced absorption from molecular hydrogen. We suggest that the application of our classifier to data produced by next-generation spectroscopic surveys will set stronger constraints on the number density of low-mass Population III stars in the Milky Way.

47 OTHER INSTRUMENTATION↗

The imprint of cosmic voids from the DESI Legacy Survey DR9 Luminous Red Galaxies in the Planck 2018 lensing map through spectroscopically calibrated mocks

The cross-correlation of cosmic voids with the lensing convergence (κ) map of the Cosmic Microwave Background (CMB) fluctuations provides a powerful tool to refine our understanding of the current cosmological model. However, several studies have reported a moderate tension (up to ∼2σ) between the lensing imprint of cosmic voids on the observed CMB and the ΛCDM signal predicted by simulations. To address this “lensing-is-low” tension and to obtain new, precise measurements of the signal, we exploit the large DESI Legacy Survey Luminous Red Galaxy (LRG) data set, covering approximately 19 500 deg 2 of the sky and including about 10 million LRGs at z < 1.05. Our ΛCDM template was created using the Buzzard mocks, which we specifically calibrated to match the clustering properties of the observed galaxy sample by exploiting more than one million DESI spectra. We identified our catalogs of 3D voids in the range 0.35 < z < 0.95 and cross-correlated them through a stacking methodology, dividing the sample into bins according to the redshift and λv values of the voids. For the full void sample, we report a 14σ detection of the lensing signal, with A κ = 1.016 ± 0.054, which increases to 17σ when considering the void-in-void (A κ = 0.944 ± 0.064) and the void-in-cloud (A κ = 0.975 ± 0.060) populations individually, the highest detection significance for studies of this kind. We observe a full agreement between observations and ΛCDM mocks across all redshift bins, sky regions, and void populations considered. In addition to these findings, our analysis highlights the importance of accurately matching sparseness and redshift error distributions between mocks and observations, as well as the role of λ v in enhancing the signal-to-noise ratio through void population discrimination.

79 ASTRONOMY AND ASTROPHYSICS↗

Photometry of Outer Solar System Objects from the Dark Energy Survey. I. Photometric Methods, Light-curve Distributions, and Trans-Neptunian Binaries

We report the methods of and initial scientific inferences from the extraction of precision photometric information for the >800 trans-Neptunian objects (TNOs) discovered in the images of the Dark Energy Survey (DES). Scene-modeling photometry is used to obtain shot-noise-limited flux measures for each exposure of each TNO, with background sources subtracted. Comparison of double-source fits to the pixel data with single-source fits are used to identify and characterize two binary TNO systems. A Markov Chain Monte Carlo method samples the joint likelihood of the intrinsic colors of each source as well as the amplitude of its flux variation, given the time series of multiband flux measurements and their uncertainties. A catalog of these colors and light-curve amplitudes A is included with this publication. We show how to assign a likelihood to the distribution q(A) of light-curve amplitudes in any subpopulation. Using this method, we find decisive evidence (i.e., evidence ratio <0.01) that cold classical (CC) TNOs with absolute magnitude 6 < H$_{r}$ < 8.2 are more variable than the hot classical (HC) population of the same H$_{r}$, reinforcing theories that the former form in situ and the latter arise from a different physical population. Resonant and scattering TNOs in this H$_{r}$ range have variability consistent with either the HCs or CCs. DES TNOs with H$_{r}$ < 6 are seen to be decisively less variable than higher-H$_{r}$ members of any dynamical group, as expected. More surprising is that detached TNOs are decisively less variable than scattering TNOs, which requires them to have distinct source regions or some subsequent differential processing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A catalog of atmospheric densities from the drag on five balloon satellites

A catalog of atmospheric densities derived for the drag on five balloon satellites is presented. Much of the catalog was based on precisely reduced Baker-Nunn observations and, for that reason, provides much improved time resolution. The effect of direct solar radiation pressure was precisely evaluated, and that of terrestrial radiation pressure was included in every case. The interval covered for each satellite varies between 3.1 and 7.6 years, with the data extending from early 1961 to early 1973.

Jacchia, L. G.↗

High Data Rate Architecture (HiDRA)

One of the greatest challenges in developing new space technology is in navigating the transition from ground based laboratory demonstration at Technology Readiness Level 6 (TRL-6) to conducting a prototype demonstration in space (TRL-7). This challenge is com- pounded by the relatively low availability of new spacecraft missions when compared with aeronautical craft to bridge this gap, leading to the general adoption of a low-risk stance by mission management to accept new, unproven technologies into the system. Also in consideration of risk, the limited selection and availability of proven space-grade components imparts a severe limitation on achieving high performance systems by current terrestrial technology standards. Finally from a space communications point of view the long duration characteristic of most missions imparts a major constraint on the entire space and ground network architecture, since any new technologies introduced into the system would have to be compliant with the duration of the currently deployed operational technologies, and in some cases may be limited by surrounding legacy capabilities. Beyond ensuring that the new technology is verified to function correctly and validated to meet the needs of the end users the formidable challenge then grows to additionally include: carefully timing the maturity path of the new technology to coincide with a feasible and accepting future mission so it flies before its relevancy has passed, utilizing a limited catalog of available components to their maximum potential to create meaningful and unprecedented new capabilities, designing and ensuring interoperability with aging space and ground infrastructures while simultaneously providing a growth path to the future. The International Space Station (ISS) is approaching 20 years of age. To keep the ISS relevant, technology upgrades are continuously taking place. Regarding communications, the state-of-the-art communication system upgrades underway include high-rate laser terminals. These must interface with the existing, aging data infrastructure. The High Data Rate Architecture (HiDRA) project is designed to provide networked store, carry, and forward capability to optimize data flow through both the existing radio frequency (RF) and new laser communications terminal. The networking capability is realized through the Delay Tolerant Networking (DTN) protocol, and is used for scheduling data movement as well as optimizing the performance of existing RF channels. HiDRA is realized as a distributed FPGA memory and interface controller that is itself controlled by a local computer running DTN software. Thus HiDRA is applicable to other arenas seeking to employ next-generation communications technologies, e.g. deep space. In this paper, we describe HiDRA and its far-reaching research implications.

DTN↗

The Structure of Evolution LOCBURST: The BATSE Burst Location Algorithm

The gamma-ray bursts (GRB) location algorithm used to produce the BATSE GRB locations is described. The general flow of control of the current location algorithm is presented and the significant properties of the various physical inputs required are identified. The development of the burst location algorithm during the releases of the BATSE 1B, 2B, and 3B gamma-ray burst catalogs is presented so that the reasons for the differences in the positions and error estimates between the catalogs can be understood. In particular, differences between the 2B and 3B locations are discussed for events that have moved significantly and the reasons for the changes explained. The locations of bursts located independently by the interplanetary network are used to illustrate the effect on burst location accuracy of various components of the algorithm. IPN data as well as locations from other gamma-ray instruments are used to calculate estimates of the systematic errors on BATSE burst locations.

Pendleton, Geoffrey N.↗

PNNL DataHub NIAID Program Project: Modeling Host Responses to Understand Severe Human Virus Infections, Multi-Omic Viral Dataset Catalog Collection

The National Institute of Allergy and Infectious Diseases (NIAID) "Modeling Host Responses to Understand Severe Human Virus Infections" program project was a highly integrated and comprehensive systems biology research core, funded by the National Institute of Health (U19AI106772) from 2013-06-01 to 2018-05-31, investigating the complex host response to category A, B, and C priority pathogen infections. Resulting project deliverables include an extensive comprehensive collections of linked primary and secondary transformation viral experimental infection data. Here we provide a never before released comprehensive infectious disease collection of primary and secondary transformation multi-Omics data profiling a series of priority pathogen primary experimental studies for enhanced open access to viral Omics lifecycle datasets and project metadata. Using a highly integrated and multidisciplinary approach, linked primary data and metadata supporting secondary normalization datasets, provide critical information necessary for research reproducibility and long-term preservation. Enabling on-demand data access for research community consumption and developer reuse, serves to support new mechanistic insights and discoveries into host-pathogen interactions for aiding future biohazard data preparedness efforts in emergency response to global health crises involving viral infection.

59 BASIC BIOLOGICAL SCIENCES↗

The Structure and Evolution of LOCBURST: The BATSE Burst Location Algorithm

The gamma-ray burst (GRB) location algorithm used to produce the BATSE GRB locations is described. The general flow of control of the current location algorithm is presented, and the significant properties of the various physical inputs required are identified. The development of the burst location algorithm during the releases of the BATSE IB, 2B, and 3B GRB catalogs is presented so that the reasons for the differences in the positions and error estimates between the catalogs can be understood. In particular, differences between the 2B and 3B locations are discussed for events that have moved significantly and the reasons for the changes explained. The locations of bursts located independently by the interplanetary network (IPN) are used to illustrate the effect on burst location accuracy of various components of the algorithm. IPN data and locations from other gamma-ray instruments are used to calculate estimates of the systematic errors on BATSE burst locations.

Pendleton, Geoffrey N.↗

Seismic monitoring of EGS fracture stimulations at Utah FORGE (Part 1): Time-lapse variations of b-values and Shear-wave Splitting Rates of induced microearthquakes

Characterizing geologic formations near geothermal wells is crucial for efficient extraction of subsurface geothermal energy resources. To monitor effective fracture stimulation of enhanced geothermal systems (EGS), we analyze a catalog of induced microearthquakes to characterize seismicity induced by Phase 2C fracture stimulations of the Utah FORGE project and derive the b-values for 424 induced microearthquakes in three stages of fracture stimulation. Here, we find the time-lapse variations of these b-values. We apply eigenvector rotation and waveform correlation to 3C geophone data to separate fast S 1 and slow S 2 waves, determine their directions, measure their lag time, and calculate the S-wave splitting rate (SSR) for six induced microearthquakes in Stage 1 and 21 in Stage 3. Both SSR values and b-values increase with time. The increase in these values may be related to heavily fractured zones created by fracture stimulations during Stage 2 injections. Large and highly variable SSR values in Stage 3 may reflect heterogeneities in the fracture zones. Time-lapse variations of SSR values and b-values may be one of the most useful approaches to monitoring and characterizing the effectiveness and efficiency of various types of fracture stimulations.

58 GEOSCIENCES↗

Quantitative Examination of a Large Sample of Supra-Arcade Downflows in Eruptive Solar Flares

Sunward-flowing voids above post-coronal mass ejection flare arcades were first discovered using the soft X-ray telescope aboard Yohkoh and have since been observed with TRACE (extreme ultraviolet (EUV)), SOHO/LASCO (white light), SOHO/SUMER (EUV spectra), and Hinode/XRT (soft X-rays). Supra-arcade downflow (SAD) observations suggest that they are the cross-sections of thin flux tubes retracting from a reconnection site high in the corona. Supra-arcade downflowing loops (SADLs) have also been observed under similar circumstances and are theorized to be SADs viewed from a perpendicular angle. Although previous studies have focused on dark flows because they are easier to detect and complementary spectral data analysis reveals their magnetic nature, the signal intensity of the flows actually ranges from dark to bright. This implies that newly reconnected coronal loops can contain a range of hot plasma density. Previous studies have presented detailed SAD observations for a small number of flares. In this paper, we present a substantial SADs and SADLs flare catalog. We have applied semiautomatic detection software to several of these events to detect and track individual downflows thereby providing statistically significant samples of parameters such as velocity, acceleration, area, magnetic flux, shrinkage energy, and reconnection rate. We discuss these measurements (particularly the unexpected result of the speeds being an order of magnitude slower than the assumed Alfven speed), how they were obtained, and potential impact on reconnection models.

Savage, Sabrina L.↗