Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cross section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

s-wave threshold in electron attachment - Observations and cross sections in CCl4 and SF6 at ultralow electron energies

The threshold photoionization method was used to study low-energy electron attachment phenomena in and cross sections of CCl4 and SF6 compounds, which have applications in the design of gaseous dielectrics and diffuse discharge opening switches. Measurements were made at electron energies from below threshold to 140 meV at resolutions of 6 and 8 meV. A narrow resolution-limited structure was observed in electron attachment to CCl4 and SF6 at electron energies below 10 meV, which is attributed to the divergence of the attachment cross section in the limit epsilon, l approaches zero. The results are compared with experimental collisional-ionization results, electron-swarm unfolded cross sections, and earlier threshold photoionization data.

Chutjian, A.↗

State-dependent photoionization cross-sections of 3d transition metal atoms

Using the saturation method, we measured the absolute photoionization cross-sections of several excited states of titanium, vanadium, chromium, iron, and cobalt. These results are reported for the first time in this paper. The measured values range from 0.4 {+-} 0.1 Mb to 6.9 {+-} 2.0 Mb. The results show that the photoionization cross-section depends on the atomic state and not just on the electronic configuration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of the production cross section of prompt $ {\Xi}_{\mathrm{c}}^0 $ baryons at midrapidity in pp collisions at $ \sqrt{s} $ = 5.02 TeV

The transverse momentum (p T ) differential cross section of the charm-strange baryon $ {\Xi}_{\mathrm{c}}^0 $ is measured at midrapidity (|y| < 0.5) via its semileptonic decay into e + Ξ - ν e in pp collisions at $\sqrt{s}$ = 5.02 TeV with the ALICE detector at the LHC. The ratio of the p T -differential $ {\Xi}_{\mathrm{c}}^0 $-baryon and D 0 -meson production cross sections is also reported. The measurements are compared with simulations with different tunes of the PYTHIA 8 event generator, with predictions from a statistical hadronisation model (SHM) with a largely augmented set of charm-baryon states beyond the current lists of the Particle Data Group, and with models including hadronisation via quark coalescence. The p T -integrated cross section of prompt $ {\Xi}_{\mathrm{c}}^0 $-baryon production at midrapidity is also reported, which is used to calculate the baryon-to-meson ratio $ {\Xi}_{\mathrm{c}}^0 $/D 0 = 0.20 ± 0.04 (stat.)$^{+0.08}_{-0.07}$ (syst.). These results provide an additional indication of a modification of the charm fragmentation from e + e - and e - p collisions to pp collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sensitivity analysis of homogenized cross section in AP1000 lattices

The two-step method for light water reactor simulation consists of performing lattice-level calculations to determine homogenized properties of the lattice for a variety of configurations and burnups then performing a core-level calculation which relies on those pre-calculated lattice properties. Calculating the homogenized lattice properties for the specific conditions needed in the core-level calculation relies on interpolating from the pre-calculated lattice properties. Although many studies have explored different models that can be used for this interpolation, there is a need to explore how to appropriately parameterize the lattice for those interpolation models. The present study uses linear sensitivity methods to determine the sensitivity of homogenized cross sections to both instantaneous and historical values of state variables. The results from this study can be used to inform parameterizations which more appropriately capture history effects in homogenized cross section interpolation. Two different lattices are used for this analysis from the AP1000 reactor, one includes burnable absorbers. It was found that early in the cycle, the historical values of state variables have little effect on the instantaneous value of the homogenized cross sections explored here - especially in the case of the lattice containing burnable absorbers. However, it was found that later in the cycle, the thermal fission homogenized cross section was sensitive to the historic states of the lattice. In fact, using the average of a state variable as a predictor for interpolation models may be insufficient for capturing historic effects due to more recent states having larger sensitivity measures than less recent states. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Efficient calculation of self magnetic field, self-force, and self-inductance for electromagnetic coils with rectangular cross-section

Abstract For designing high-field electromagnets, the Lorentz force on coils needs to be computed in order to design suitable support structures, and the inductance should be computed to evaluate the stored energy and dynamics. Also, the magnetic field and its variation inside the conductor is of interest for computing stress and strain, and due to superconducting quench limits. For these force, inductance, energy, and internal field calculations, the coils cannot be naively approximated as infinitesimally thin filaments due to divergences when the source and evaluation points coincide, so more computationally demanding calculations are usually required, resolving the finite cross-section of the conductors. Here, we present a new alternative method that enables the internal magnetic field vector, self-force, and self-inductance to be computed rapidly and accurately within a 1D filament model. The method is applicable to coils for which the curve center-line can have general noncircular shape, as long as the conductor width is small compared to the radius of curvature. This paper extends a previous calculation for circular-cross-section conductors (Hurwitz et al 2024 IEEE Trans. Magn. ) to consider the case of rectangular cross-section. The reduced model is derived by rigorous analysis of the singularity, regularizing the filament integrals such that they match the true high-dimensional integrals at high coil aspect ratio. The new filament model exactly recovers analytic results for a circular coil, and is shown to accurately reproduce full finite-cross-section calculations for a non-planar coil of a stellarator magnetic fusion device. Due to the efficiency of the model here, it is well suited for use inside design optimization.

Landreman, Matt (ORCID:000000027233577X)↗

Absolute elastic differential electron scattering cross sections in the intermediate energy region. III - SF6 and UF6

A recently developed technique has been used to measure the ratios of elastic differential electron scattering cross sections (DCS) for SF6 and UF6 to those of He at electron impact energies of 5, 10, 15, 20, 30, 40, 50, 60, and 75 eV and at scattering angles of 20 to 135 deg. In order to obtain the absolute values of DCS from these ratios, He DCS of McConkey and Preston have been employed in the 20 to 90 deg range. At angles in the 90 to 135 deg range the recently determined cross sections of Srivastava and Trajmar have been utilized. From these DCS, elastic integral and momentum transfer cross sections have been obtained.

Srivastava, S. K.↗

Measurement of the production cross section of jets in association with a Z boson in pp collisions at s = 7 TeV with the ATLAS detector

CERN-LHC. Measurements of cross sections for the production of jets in association with a Z0 boson in proton-proton collisions at a centre of mass energy of 7 TeV. The 2011 data sample used has an integrated luminosity of 4.6 fb^{-1}. Inclusive cross sections for Z0 decaying into either electron or muon pairs with jets of transverse momentum above 30 GeV and |rapidity| less than 4.4 are presented along with a detailed breakdown of the systematic errors in the measurements. Data are given here for the individual electron and muon channels as well as for the combined data as shown in the paper. The combined cross section has been extrapolated to the common phase space |eta|<2.5 and pT>20 GeV, similar to the 2010 analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the b-hadron production cross section using decays to D &#x2217; &#x3BC; &#x2212; X final states in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

CERN-LHC. The b-hadron production cross section is measured with the ATLAS detector in pp collisions at sqrt(s) = 7 TeV, using 3.3 pb^-1 of integrated luminosity, collected during the 2010 LHC run. The b-hadrons are selected by partially reconstructing D*muX final states. Differential cross sections are measured as functions of the transverse momentum and pseudorapidity. The measured production cross section for a b-hadron with pT>9 GeV and |eta|<2.5 is 32.7 pm 0.8 (stat) ^{+4.5}_{-6.8} (syst) ub, higher than the next-to-leading-order QCD predictions but consistent within the experimental and theoretical uncertainties. Data taken from the RIVET analysis code.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Total Born approximation cross sections for single electron loss by atoms and ions colliding with atoms

The first born approximation (FBA) is applied to the calculation of single electron loss cross sections for various ions and atoms containing from one to seven electrons. Screened hydrogenic wave functions were used for the states of the electron ejected from the projectile, and Hartree-Fock elastic and incoherent scattering factors were used to describe the target. The effect of the target atom on the scaling of projectile ionization cross sections with respect to the projectile nuclear charge was explored in the case of hydrogen-like ions. Scaling of the cross section with respect to the target nuclear charge for electron loss by Fe (+25) in collision with neutral atoms ranging from H to Fe is also examined. These results were compared to those of the binary encounter approximation and to the FBA for the case of ionization by completely stripped target ions.

Rule, D. W.↗

Measurement of the Photoproduction Cross-Section of f1(1285) in the Exclusive Reactions p¿ p'K±KSp± AT 7.5 < E¿ < 11.5 GeV with GlueX at Jefferson Lab

The f1(1285) meson is commonly understood to belong to the axial-vector nonet as the low-mass isoscalar partner to the f1(1420) but has been suggested as a candidate for a KK?+c.c molecule. A nearly mass-degenerate 0?+ state has been observed in ? p scattering that calls into question the established branching ratios of the f1(1285) decays. Recently, the differential cross-section for the photoproduction of f1(1285) was measured by the CLAS experiment and the results disagreed with theoretical predictions. Additionally, the CLAS experiment did not observe a mass-degenerate 0?+ state. We present the results of the first photoproduction cross-section measurement d?/dt of f1(1285) at 7.5 < E? < 11.5 GeV from the GlueX experiment at Thomas Jefferson National Accelerator Facility in the reactions ? p ? p?K?Ks?+ and ? p ? p?K+Ks??. We find that the production mechanism of f1(1285) is consistent with t-channel exchange. We also observe a difference in the differential cross-section of f1(1285) as a function of ?t as measured in the charge conjugated K?Ks?± decay modes that we hypothesize to be due to baryonic N? interference. The observed distributions of M(KK) and M(K?) are consistent with both a q ¯ q state and predictions for a KK?+c.c molecular state. Additionally, we find that the cross-section at low M(KK?) is dominated by the 1++ state.

Viducic, Tyler↗

Fragmentation of 710 and 1050 MeV/nuc Fe nuclei in CH2 and C targets - Isotopic cross sections for H targets

Fe nuclei of incident energies of 710 and 1050 MeV/nuc in CH2 and C targets are fragmented in order to measure isotopic cross sections in hydrogen targets. The telescope used to measure the charge and mass of the fragments is a Cerenkov x total energy telescope. The data are reported for z = 20-25 fragments. The number of individual events corresponding to each charged fragment is obtained and analyzed. Ratios of partial cross sections on C and CH2 targets indicate that simple scaling exists for isotope fractions as well as for charge fractions in different targets. The cross sections in hydrogen are obtained directly by a simple subtraction. Excitation functions for Mn and Cr nuclei are presented.

Webber, W. R.↗

Automated Selection of Electron Neutrinos from the NuMI beam in the MicroBooNE Detector and Prospects for a Measurement of the Charged-Current Inclusive Cross Section

We present a fully automated selection of NuMI beam produced electron neutrinos interacting in the MicroBooNE liquid argon time projection chamber operating at Fermilab. This analysis makes use of the Pandora reconstruction framework and subsequently a selection method developed specifically to select $ν_e$ and $\barν_e$ in data. The selection also utilizes one of liquid argon’s signature capabilities, distinguishing electron-like and photon-like electromagnetic showers using dE/dx in data, as well as scintillation light-based timing. The studies presented here demonstrate a closure test of calculating the inclusive cross using Monte Carlo, where the input Monte Carlo cross section matches the extracted Monte Carlo cross section. From this we forecast the prospects of a future $ν_e$ + $\barν_e$ cross section with MicroBooNE data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Differential cross section for neutron scattering from {sup 209}Bi at 37 MeV and the weak particle-core coupling

Differential scattering cross-section data have been measured at 43 angles from 11 deg. to 160 deg. for 37-MeV neutrons incident on {sup 209}Bi. The primary motivation for the measurements is to address the scarcity of neutron scattering data above 30 MeV and to improve the accuracy of optical-model predictions at medium neutron energies. The high-statistics measurements were conducted at the China Institute of Atomic Energy using the {sup 3}H(d,n){sup 4}He reaction as the neutron source, a pulsed deuteron beam, and time-of-flight (TOF) techniques. Within the resolution of the TOF spectrometer, the measurements included inelastic scattering components. The sum of elastic and inelastic scattering cross sections was computed in joint optical-model and distorted-wave Born approximation calculations under the assumption of the weak particle-core coupling. The results challenge predictions from well-established spherical optical potentials. Good agreement between data and calculations is achieved at 37 MeV provided that the balance between surface and volume absorption in a recent successful model [A. J. Koning and J. P. Delaroche, Nucl. Phys. A 713, 231 (2003)] is modified, thus suggesting the need for global optical-model improvements at medium neutron energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A File Format and API for Dynamic Radar Cross Section Data

Often the Radar Cross-Section (RCS) of a target is incorrectly assumed to be a single number by those unfamiliar with electromagnetic scattering. In actuality, a target's RCS depends on many factors. These factors include radar signal frequency, radar observation angle, as well as target orientation. Another possible parameter (often not considered) is time. The RCS of targets may change over time due to movement, environmental changes, etc. In order to accurately represent the dynamic RCS of a target in a time-stepped analysis, the ability to interface with large RCS datasets efficiently is desired. To this end, a file format and API (written in C++) were developed and are described in this report.

42 ENGINEERING↗