Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “configurable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Performance and acoustic prediction of counterrotating propeller configurations

The Davidson (1981) numerical method is used to predict the performance of a counterrotating propeller configuration over a range of different front and back disk rotation speeds with constant-speed propellers; this has yielded such overall performance parameters as integrated thrust, torque, and power, as well as the radial variation of blade torque and thrust. Since the unsteady component of the noise from a counterrotating propeller configuration is minimal in the plane of the propeller disk, this approach is restricted to noise-level predictions for observer locations in this region.

Denner, B. W.↗

Dynamic characteristics of a Space Station Freedom Mars evolution reference configuration

One concept for a manned mission to Mars uses as a transportation mode an evolutionary version of Space Station Freedom (SSF), termed the Mars Evolution Reference Configuration (MERC). The MERC is configured by adding to SSF dual keels, an upper and lower boom, additional laboratory and habitation modules, increased power, and an assembly platform. A finite-element model of the MERC was formulated to investigate the expected low frequency modes, and its variations with the addition of large payload. A basic reboost procedure using near-continuous firing of reaction control system jets is described with the closed-loop attitude control system. The elastic dynamic behavior at critical points during a reboost of the MERC, both with and without the Mars piloted vehicle installed, is examined.

Ayers, J. Kirk↗

Structural configuration options for the Space Station Freedom solar dynamic radiator

In order to meet the growing power demands of the Space Station, the electrical power system design includes an option to provide additional power capability in increments of 50 kWe of power. Each increment consists of a pair of two solar dynamic power modules (SDPMs), each of which containing a closed Brayton Cycle (CBC) thermodynamic engine. A solar dynamic radiator (SDR) enables the CBC to reject the waste heat to the surrounding space environment. This paper analyzes three alternatives to the baseline configuration of the Space Station Freedom solar dynamic radiator and discusses their merits based on Space Shuttle cargo capabilities, location with respect to the SDPM supporting structure, thermal performance, drag, concentrator shading, mass, and other issues of concenrn. Results indicating the advantages and disadvantages of each option are presented along with diagrams of the alternative configurations.

Tylim, Adrian↗

Experimental transonic flutter characteristics of supersonic cruise configurations

The flutter characteristics of a generic arrow-wing supersonic transport configuration are studied. The wing configuration has a 3 percent biconvex airfoil and a leading-edge sweep of 73 deg out to a cranked tip with a 60 deg leading-edge sweep. The ground vibration tests and flutter test procedure are described. The effects of flutter on engine nacelles, fuel loading, wing-mounted vertical fin, wing angle-of-attack, and wing tip mass and stiffness distributions are analyzed. The data reveal that engine nacelles reduce the transonic flutter dynamic pressure by 25-30 percent; fuel loadings decrease dynamic pressures by 25 percent; 4-6 deg wing angles-of-attack cause steep transonic boundaries; and 5-10 percent changes in flutter dynamic pressures are the result of the wing-mounted vertical fin and wing-tip mass and stiffness distributions.

Durham, Michael H.↗

Magnetic field configuration of the theta aurora

A magnetic configuration of the open magnetosphere is described which is conducive to the formation of the theta aurora when the IMF has a significant northward component. A magnetic field topology and polar cap configuration, derived from a quantitative model of the open magnetosphere that incorporates Crooker's antiparallel merging hypothesis, are presented. Under this hypothesis, when the IMF has a northward component, the dayside merging line bifurcates, leaving a large fraction of the subsolar magnetopause untouched by the merging process. The polar cap, defined by tracing magnetic field lines that connect from the solar wind to the earth, is similarly bifurcated, leaving a sun-aligned stagnation region that is not magnetically connected to the solar wind and may plausibly be associated with the sun-aligned 'bar' of the theta aurora. The model provides testable predictions with regard to the position of this 'convection gap' in both Northern and Southern Hemispheres as functions of IMF direction.

Toffoletto, F. R.↗

Experimental and predicted aerodynamic characteristics of a proposed Assured Crew Return Vehicle (ACRV) lifting-body configuration at Mach 6 and 10

The effects of Mach number, Reynolds number, and ratio of specific heats on the aerodynamic characteristics of a proposed Assured Crew Return Vehicle (ACRV) lifting-body configuration were examined for a range of angles of attack from -5 deg to 50 deg. Predictions made with a Langley-developed, three-dimensional Navier Stokes solver known as LAURA, which was exercised as an Euler solver for the present study, are compared with the experimental results. Unlike the Shuttle Orbiter, which experienced a significant nose-up increment in pitching moment with decreasing specific heat ratio (i.e., real gas effects), the aerodynamic characteristics of this lifting-body configuration are insensitive to changes in specific heat ratio. The maximum trimmed lift-to-drag ratio achieved was about 1.5. Predicted inviscid values of aerodynamic coefficients were generally in good agreement with measurement.

Micol, John R.↗

Supersonic flow computations for an ASTOVL aircraft configuration

A multi-zonal, unified, space/time marching method has been used to solve the Euler and Reynolds-averaged Navier-Stokes equations for supersonic flow past an Advanced Short Take-Off and Vertical Landing (ASTOVL) aircraft configuration. Lift, drag and pitching moment values obtained from the computations compare well with wind-tunnel measurements. The calculations demonstrate the capability of the method used to accurately predict design parameters such as lift, drag and pitching moment for very complex aircraft configurations.

Ramakrishnan, S. V.↗

Multi-reactor configurations for multi-megawatt spacecraft power supplies

Several conceptual designs for a multimegawatt space nuclear power supply system were developed on the basis of hardware and technology from the existing multihundred kilowatt-class SP-100 reactor program. It is shown that net power outputs in the multimegawatt range can be achieved by using a modular multireactor configuration of several SP-100-derived nuclear power supplies. A variety of geometries were examined for their applicability to the multireactor configuration, showing that modular multireactor systems have the advantage of an increased redundancy in the power system, as compared with a single-reactor system, allowing higher reliabilities than those achievable with single-reactor systems. Results are presented on the Mars Cargo Mission analysis, showing that modularity allows the option of redeployment of power systems in Mars and facilitates refurbishment and turnaround of NEP transfer vehicles.

George, Jeffrey A.↗

Numerical modeling of flows in simulated brush seal configurations

The two-dimensional flow field in a linear brush seal configuration is modeled and the flow field determined numerically using an FEM model consisting of a matrix of 6 x 6 uniformly spaced circular bristles with a uniform flow field upstream of the simulated brush element. Results from the numerical model are compared to earlier work for a circular seal of similar configuration. Temporal disturbance of the upstream flow field is studied to elucidate system dynamics; however, only the local velocity field is investigated. The effect of tangential flow at the upstream boundary is also studied. Tangential flow produces changes in the pressure applied to the bristle but has little effect on the axial flow rates.

Mullen, R. L.↗

Analytic Patch Configuration (APC) gateway version 1.0 user's guide

The Analytic Patch Configuration (APC) is an interactive software tool which translates aircraft configuration geometry files from one format into another. This initial release of the APC Gateway accommodates six formats: the four accepted APC formats (89f, 89fd, 89u, and 89ud), the PATRAN 2.x phase 1 neutral file format, and the Integrated Aerodynamic Analysis System (IAAS) General Geometry (GG) format. Written in ANSI FORTRAN 77 and completely self-contained, the APC Gateway is very portable and was already installed on CDC/NOS, VAX/VMS, SUN, SGI/IRIS, CONVEX, and GRAY hosts.

Bingel, Bradford D.↗

Ground effects on the low-speed aerodynamics of a powered, generic hypersonic configuration

A study was undertaken in the NASA Langley 14- by 22-foot subsonic tunnel to determine the low-speed aerodynamic characteristics of a powered, generic, hypersonic configuration in ground effect. The model was a simplified configuration consisting of a triangular wedge forebody, a rectangular mid-section which housed the flow through, an ejector type propulsion simulation system, and a rectangular wedge afterbody. Additional model components included a delta wing, a rectangular wedge forebody, inlet fences, exhaust flow deflectors, and afterbody fences. Aerodynamic force and moment data were obtaind over an angle of attack range from -4 to 18 degrees while model height above the tunnel floor was varied from 1/4 inch to 6 feet. Variations in freestream dynamic pressure, from 10 psf to 80 psf, and engine ejector pressure yielded a range of thrust coefficients from 0 to 0.8.

Gatlin, Gregory M.↗

A patched-grid algorithm for complex aircraft configurations

A patched-grid algorithm for the analysis of complex configurations with an implicit, upwind-biased Navier-Stokes solver is presented. Through the use of a generalized coordinate transformation at the zonal interface between two or more blocks, the algorithm can be applied to highly stretched viscous grids and to arbitrarily-shaped patch boundaries. Applications are made to the SR71 reconnaissance aircraft in a high-altitude environment at a supersonic speed and to the F/A-18 forebody-strake configuration at subsonic, high-alpha conditions, in support of the NASA High-Alpha Research Program.

Walters, Robert W.↗

Application of a patched-grid algorithm to the F/A-18 forebody-leading-edge extension configuration

A patched-grid algorithm for the analysis of complex configurations with an implicit, upwind-biased Navier-Stokes solver is presented. Results from both a spatial-flux and a time-flux conservation approach to patching across zonal boundaries are presented. A generalized coordinate transformation with a biquadratic geometric element is used at the zonal interface in order to treat highly stretched viscous grids and arbitrarily shaped zonal boundaries. Applications are made to the F/A-18 forebody-Ieading-edge extension configuration at subsonic, high-alpha conditions. Computed surface flow patterns compare well with ground-based and flight-test results; the large effect of Reynolds number on the forebody flowfield is shown.

Leading edge extension↗

Improved configuration control for redundant robots

This article presents a singularity-robust task-prioritized reformulation of the configuration control scheme for redundant robot manipulators. This reformulation suppresses large joint velocities near singularities, at the expense of small task trajectory errors. This is achieved by optimally reducing the joint velocities to induce minimal errors in the task performance by modifying the task trajectories. Furthermore, the same framework provides a means for assignment of priorities between the basic task of end-effector motion and the user-defined additional task for utilizing redundancy. This allows automatic relaxation of the additional task constraints in favor of the desired end-effector motion, when both cannot be achieved exactly. The improved configuration control scheme is illustrated for a variety of additional tasks, and extensive simulation results are presented.

Seraji, H.↗

MHD simulations of magnetic reconnection in a skewed three-dimensional tail configuration

The dynamic evolution of a nonsymmetric magnetotail configuration initiated by the sudden occurrence of (anomalous) resistivity are examined using a three-dimensional resistive MHD simulation developed by Birn (1990) that includes a net cross-tail field and thus breaks the mirror symmetry around the neutral sheet. Results show that the field evolution is similar to that of a symmetric configuration studied by Birn and Hones (1981), pointing to the formation and ejection of a plasmoid. On the other hand, the topological structure of the magnetic field, defined by the field line connections, was remarkably different from the symmetric case. The plasmoid in this case became 'open', connected initially with the earth but gradually becoming connected with the interplanetary field. The openness of the plasmoid and its magnetic connection with interplanetary field lines suggest the possibility of a heat flux out of the plasmoid on interconnected flux tubes.

Birn, J.↗

Navier-Stokes simulation of a close-coupled canard-wing-body configuration

The thin-layer Navier-Stokes equations are solved for the flow about a coplanar close-coupled canard-wing-body configuration at a transonic Mach number of 0.90 and at angles of attack ranging from 0 to 12 degrees. The influence of the canard on the wing flowfield, including canard-wing vortex interaction and wing vortex breakdown, is investigated. A study of canard downwash and canard leading-edge vortex effects, which are the primary mechanisms of the canard-wing interaction, is emphasized. Comparisons between the computations and experimental measurements of surface pressure coefficients, lift, drag and pitching moment data are favorable. A grid refinement study for configurations with and without canard shows that accurate results are obtained using a refined grid for angles of attack where vortex burst is present. At an angle of attack of approximately 12 deg, favorable canard-wing interaction which delays wing vortex breakdown is indicated by the computations and is in good agreement with experimental findings.

Tu, Eugene L.↗

The prediction of viscous hypersonic flows about complex configurations using an upwind parabolized Navier-Stokes code

A three-dimensional parabolized Navier-Stokes computer code which employs an upwind algorithm is used to conduct a numerical study of an advanced maneuvering reentry vehicle configuration. Comparisons between numerical solutions and experimental data are presented for surface pressure, wall heat flux, and overall forces and moments. The effects of angle of attack, angle of yaw, and surface mass injection are investigated. Good agreement is observed between the calculated and measured data. The results of this investigation demonstrate the accuracy and efficiency of an upwind scheme in predicting the hypersonic flow field characteristics about a complex configuration.

Narain, J. P.↗

Relative populations of excited levels within the ground configuration of Si-like Cu, Zn, Ge and Se ions

Populations of 3p2 1D2, 3P1, 3P2 levels in Si-like Cu, Zn, Ge, and Se ions have been deduced from the measurements of absolute intensities of magnetic dipole transitions within the 3s2 3p2 ground configuration. The measured population ratios are compared with theoretical calculations based on the distorted-wave approximation for the electron collisions and a semiclassical approximation for the proton collisions. The observed deviation from the statistical distribution for the excited-level populations within the ground configuration along the silicon isoelectronic sequence is in agreement with theoretical prediction.

Datla, R. U.↗