Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coils”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

TRW plasma wave experiment for the IMP-H mission

The IMP-H plasma wave experiment is designed to extend knowledge of wave-particle interactions in the disturbed cislunar region, the distant geomagnetic tail, the upstream solar wind, and the flanks of the magnetosheath-shock interface. It is expected to identify plasma instabilities, study particle acceleration and heating at collisionless shocks and other discontinuities, analyze turbulent conductivity and field line merging, and provide new information on dissipation processes for suprathermal particles. Instrumentation for the plasma wave experiment is designed to measure local electric and magnetic field oscillations over the frequency range 10 Hz to 100 kHz. A 24 inch electric dipole, a 7 inch diameter air core search coil, and the associated preamplifiers are mounted on a spacecraft counterweight boom. The frequency range of 10 Hz to 100 kHz for both E and B is processed using an eight-channel spectrum analyzer located in the instrument main-body package (a standard IMP trapezoidal module, 3 inches high). Electric fields as small as 10-100 microvolts/meter and magnetic signals as small as 1-3 milligamma will be detected.

Virobik, P. F.↗
NASA NTRS1973

Inherent redundacy electric heater

A cross-wound electrical heater comprising two resistance coils wound together with opposite pitches electrically connected at their crossing points, is reported. Each element is supplied by a separate power supply of the same magnitude, and each power supply is isolated from reverse currents by a diode. Failure of one of the windings results in only a moderate change in output power.

Kernodle, B. H.↗
NASA NTRS1974

Single reflector interference spectrometer and drive system therefor

In a Fourier interference spectrometer of the doublepass retroreflector type, a single mirror is employed in the path of both split beams of an incoming ray to cause them to double back through separate retroreflectors. Changes in optical path length are achieved by linear displacement of both retroreflectors using a motor driven lead screw on one for large, low frequency changes, a moving-coil actuator on the other for smaller, mid-frequency changes and a piezoelectric actuator on one of these two for small, high frequency changes.

Schindler, R. A.↗
NASA NTRS1974

LC-oscillator with automatic stabilized amplitude via bias current control

A stable excitation supply for measurement transducers is described. It consists of a single-transistor oscillator with a coil connected to the collector and a capacitor connected from the collector to the emitter. The output of the oscillator is rectified and the rectified signal acts as one input to a differential amplifier; the other input being a reference potential. The output of the amplifier is connected at a point between the emitter of the transistor and ground. When the rectified signal is greater than the reference signal, the differential amplifier produces a signal of polarity to reduce bias current and, consequently, amplification.

Hamlet, J. F.↗
NASA NTRS1974

Complex soundproofing of industrial rooms

Some structures treated for sound absorption are described that are used to soundproof industrial rooms with a very high noise level. Soundproofing treatments for the walls and coilings or only for the ceilings are considered. In the case of relatively small rooms having a noise source with a high level, complex treatments involve, in addition to soundproofing of the walls and ceiling, suspended panels specially oriented with respect to the noise source. The efficiency of the adopted solutions is compared with calculated damping values.

Pocsa, V.↗
NASA NTRS1973

Design, evaluation and recommedation effort relating to the modification of a residential 3-ton absorption cycle cooling unit for operation with solar energy

The possible use of solar energy powered absorption units to provide cooling and heating of residential buildings is studied. Both, the ammonia-water and the water-lithium bromide cycles, are considered. It is shown that the air cooled ammonia water unit does not meet the criteria for COP and pump power on the cooling cycle and the heat obtained from it acting as a heat pump is at too low a temperature. If the ammonia machine is water cooled it will meet the design criteria for cooling but can not supply the heating needs. The water cooled lithium bromide unit meets the specified performance for cooling with appreciably lower generator temperatures and without a mechanical solution pump. It is recommeded that in the demonstration project a direct expansion lithium bromide unit be used for cooling and an auxiliary duct coil using the solar heated water be employed for heating.

Merrick, R. H.↗
NASA NTRS1973

Design for pressure regulating components

The design development for Pressure Regulating Components included a regulator component trade-off study with analog computer performance verification to arrive at a final optimized regulator configuration for the Space Storable Propulsion Module, under development for a Jupiter Orbiter mission. This application requires the pressure regulator to be capable of long-term fluorine exposure. In addition, individual but basically identical (for purposes of commonality) units are required for separate oxidizer and fuel pressurization. The need for dual units requires improvement in the regulation accuracy over present designs. An advanced regulator concept was prepared featuring redundant bellows, all metallic/ceramic construction, friction-free guidance of moving parts, gas damping, and the elimination of coil springs normally used for reference forces. The activities included testing of actual size seat/poppet components to determine actual discharge coefficients and flow forces. The resulting data was inserted into the computer model of the regulator. Computer simulation of the propulsion module performance over two mission profiles indicated satisfactory minimization of propellant residual requirements imposed by regulator performance uncertainties.

Wichmann, H.↗
NASA NTRS1974

Evaluation of selected strapdown inertial instruments and pulse torque loops, volume 1

Design, operational and performance variations between ternary, binary and forced-binary pulse torque loops are presented. A fill-in binary loop which combines the constant power advantage of binary with the low sampling error of ternary is also discussed. The effects of different output-axis supports on the performance of a single-degree-of-freedom, floated gyroscope under a strapdown environment are illustrated. Three types of output-axis supports are discussed: pivot-dithered jewel, ball bearing and electromagnetic. A test evaluation on a Kearfott 2544 single-degree-of-freedom, strapdown gyroscope operating with a pulse torque loop, under constant rates and angular oscillatory inputs is described and the results presented. Contributions of the gyroscope's torque generator and the torque-to-balance electronics on scale factor variation with rate are illustrated for a SDF 18 IRIG Mod-B strapdown gyroscope operating with various pulse rebalance loops. Also discussed are methods of reducing this scale factor variation with rate by adjusting the tuning network which shunts the torque coil. A simplified analysis illustrating the principles of operation of the Teledyne two-degree-of-freedom, elastically-supported, tuned gyroscope and the results of a static and constant rate test evaluation of that instrument are presented.

Sinkiewicz, J. S.↗
NASA NTRS1972

A study of the methods for the production and confinement of high energy plasmas

The injection of dense plasmas into a B sub z long magnetic field from both ends of the field coil was investigated. Deflagration plasma guns and continuous flow Z-pinch are discussed along with the possibility of a continuous flow Z-pinch fusion reactor. The injection experiments are described with emphasis on the synchronization of the two plasma deflagration guns, the collision of the two plasma beams, and the determination of plasma density.

Cheng, D. Y.↗
NASA NTRS1974

Feasibility study of a swept frequency electromagnetic probe (SWEEP) using inductive coupling for the determination of subsurface conductivity of the earth and water prospecting in arid regions

Techniques developed for electromagnetic probing of the lunar interior, and techniques developed for the generation of high power audio frequencies were combined to make practical a magnetic inductive coupling system for the rapid measurement of ground conductivity profiles which are helpful when prospecting for the presence and quality of subsurface water. A system which involves the measurement of the direction, intensity, and time phase of the magnetic field observed near the surface of the earth at a distance from a horizontal coil energized so as to create a field that penetrates the earth was designed and studied to deduce the conductivity and stratification of the subsurface. Theoretical studies and a rudimentary experiment in an arid region showed that the approach is conceptually valid and that this geophysical prospecting technique can be developed for the economical exploration of subterranean water resources.

Latorraca, G. A.↗
NASA NTRS1974

Study of the relation between Pc 3 micropulsations and magnetosheath fluctuations and for the multisatellite multimeasurement investigation of earths bow shock

Hourly averages of HEOS A interplanetary field and plasma parameters are compared with micropulsation spectrograms taken by auroral zone stations. Visual evaluation of tungsten induction coil records and a statistical summary indicate a class of pulsations sometimes in the Pc 3, sometimes in the Pc 4 range, whose appearance correlates with solar wind field flow alignment. It is concluded that there is a pulsation phenomenon of variable period strongly associated with certain interplanetary field directions.

Greenstadt, E. W.↗
NASA NTRS1973

Initial results from the NASA Lewis Bumpy Torus experiment

Initial results are given for low power operation of the NASA Lewis Bumpy Torus experiment in which a steady-state ion heating method based on a modified Penning discharge is applied to a bumpy torus confinement geometry. The magnet facility consists of 12 superconducting coils capable of 3.0 T each and equally spaced in a toroidal array 1.52 m in major diameter. A 18 cm i.d. anode ring is located at each of the 12 midplanes and is maintained at high positive potentials by a dc power supply. Initial observations indicate electron temperatures from 10 to 150 eV, and ion kinetic temperatures from 200 eV to 1200 eV. Two modes of operation with different radial density profiles can be achieved, depending on the background pressure applied.

Roth, J. R.↗
NASA NTRS1974

On the local time dependence of the bow shock wave structure

In the first 6 months after its launch, Ogo 3 crossed the earth's bow shock over 500 times. From this group, a set of 494 shock crossings were chosen for analysis. These crossings, as they were recorded by the UCLA/JPL search coil magnetometer, were scanned and classified according to the nature of the plasma waves detected near the shock. More than 85% of the shocks detected fell into a single category showing the predominance of two independent wave trains near the shock, the higher frequency appearing upstream and the lower downstream. The other 15%, which constitute an upper limit, appear to be composed of shocks dominated by a single wave pattern and of chaotic shocks showing no orderly progression of wave frequencies as the shock was penetrated. This division of wave pattern was found to occur at all local times, that is, in all regions where the satellite penetrated the shock.

Olson, J. V.↗
NASA NTRS1974

A correlated study of ELF waves and electron precipitation on Ogo 6

The Ogo 6 ELF chorus records from the search coil magnetometer have been compared with simultaneous electron precipitation records. The chorus signals observed in the vicinity of field lines passing through the outer magnetosphere were characteristically accompanied by electron precipitation in the same region. Both the chorus and the precipitation records consisted of a series of sharp peaks. Although in some cases chorus and precipitation peaks appeared to be associated, the observed peaks did not in general coincide. Comparison of the chorus measurements on Ogo 6 and Ogo 5 suggests a model in which the chorus is ducted along field lines to within less than 1 earth radius above the Ogo 6 orbit after which it diverges from the field lines and is deflected toward the local vertical. The result is equatorward skewing of the average wave pattern with respect to the precipitation pattern.

Holzer, R. E.↗
NASA NTRS1974

The origin and propagation of chorus in the outer magnetosphere

Wave normals of chorus in the outer magnetosphere have been determined for the first time from data obtained with the Ogo 5 search coil magnetometer. These measurements combined with simultaneous information concerning geomagnetic field, plasma density, and the electron energy and pitch angle distributions provide a consistent picture of the generation, propagation, and subsequent damping of chorus in agreement with theory. Specifically, the data are consistent with chorus generation within 25 deg of the equatorial plane on the dayside and within 2 deg on the nightside. Chorus is generated by a Doppler-shifted cyclotron resonance with electrons between 5 and 150 keV but only when the pitch angle distribution is peaked at 90 deg to the local magnetic field and the anisotropy exceeds a critical value.

Burton, R. K.↗
NASA NTRS1974

Plasmaspheric hiss intensity variations during magnetic storms

The storm time intensity variations of ELF electromagnetic emissions have been studied by using the Ogo 6 search coil magnetometer. Low-latitude signals exhibit a sharp low-frequency cutoff and are identified as plasmaspheric hiss. Such waves show pronounced intensification during the recovery phase of magnetic storms but remain close to background levels during the storm main phase. This behavior is consistent with cyclotron resonant generation within the plasmasphere as the latter expands into the intensified belt of outer zone electrons during the storm recovery.

Smith, E. J.↗
NASA NTRS1974

Magnetogasdynamic compression of a coaxial plasma accelerator flow for micrometeoroid simulation

A new configuration of a coaxial plasma accelerator with self-energized magnetic compressor coil attached is described. It is shown that the circuit may be treated theoretically by analyzing an equivalent circuit mesh. The results obtained from the theoretical analysis compare favorably with the results measured experimentally. Using this accelerator configuration, glass beads of 125 micron diameter were accelerated to velocities as high as 11 kilometers per second, while 700 micron diameter glass beads were accelerated to velocities as high as 5 kilometers per second. The velocities are within the hypervelocity regime of meteoroids.

Igenbergs, E. B.↗
NASA NTRS1974

Features of polar cusp electron precipitation associated with a large magnetic storm

Measurements of precipitating electrons made by the OGO-4 satellite reveal several interesting phenomena in the polar cusp. Extremely high fluxes of 0.7 keV electrons were observed in the polar cusp ninety minutes following the sudden commencement of a very large magnetic storm. Structured, fairly high fluxes of 7.3 keV electrons were also observed in the cusp region, accompanied by very strong search coil magnetometer fluctuations, indicative of strong field-aligned currents. The observations confirm previously reported latitudinal shifts in the location of the polar cusp in response to southward interplanetary magnetic fields.

Berko, F. W.↗