Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “chip”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Strengthening effects and thermal stability of the ultrafine grained microstructure of a nickel base superalloy at room and elevated temperatures

Highlights: • UFG Alloy 718-5 vol.%Y{sub 2}O{sub 3} alloy is fabricated from alloy machining chips. • The kind of oxide nanoparticles is identified in Nb-rich superalloys. • High thermal stable nanoparticles and UFG microstructure is achieved. • The GB strengthening effects at 25 °C and 650 °C of UFG alloy are calculated. - Abstract: An ultrafine grained (UFG) nickel base superalloy doped with 5 vol.%Y{sub 2}O{sub 3} nanoparticles, Alloy 718-5 vol.%Y{sub 2}O{sub 3}, was fabricated by a powder metallurgy route which combines high energy mechanical milling of Alloy 718 machining chips, spark plasma sintering, hot extrusion and heat treatment, and its microstructure and mechanical properties at room temperature and 650 °C were studied. The study showed that the Y{sub 2}O{sub 3} nanoparticles reacted with Al from the base alloy and transformed to Y{sub 4}Al{sub 2}O{sub 9} nanoparticles (average diameter: 12.5 nm) which were stable during heat treatment at 970 °C (0.78T{sub m}, where T{sub m} is the solidus temperature of the alloy in K). As a result of the high thermal stability of Y{sub 4}Al{sub 2}O{sub 9} nanoparticles and their effective pinning of the grain boundaries, the UFG microstructure (average grain size: 179 nm) of the alloy was stable during heat treatment. Grain boundary and nanoparticle strengthening rendered the heat treated Alloy 718-5 vol.%Y{sub 2}O{sub 3} alloy with a notable room temperature tensile yield strength of 1870 MPa. It was demonstrated that the grain boundary strengthening effect associated with the UFG microstructure was still significant at 650 °C, but clearly decreased from its level at room temperature. The grain boundary strengthening and nanoparticle strengthening effects which are likely to be independent of test temperature sustain a reasonably high tensile yield strength of 800 MPa at 650 °C, despite the absence of γ′ and γ″ precipitates in the UFG microstructure.

36 MATERIALS SCIENCE↗

Luminescence properties of Ca{sub 14}Mg{sub 2}(SiO{sub 4}){sub 8}:Eu{sup 2+} from various Eu{sup 2+} sites for white-light-emitting diodes

Ca{sub 14}Mg{sub 2}(SiO{sub 4}){sub 8}:Eu{sup 2+} phosphors were synthesized by solid-state reaction method, and their luminescence properties were investigated. In the emission spectra, several overlapping emission bands originating from various Eu{sup 2+} sites were found. Eu{sup 2+} in Ca{sub 14}Mg{sub 2}(SiO{sub 4}){sub 8} exhibits green emission around 506 nm, and the sample doped with 0.1 mol% Eu{sup 2+} shows the strongest brightness under 365 nm excitation with the quantum efficiency of 63.6%. In the excitation spectra, strong and broad excitation bands from 250 to 450 nm were observed, which could well match with the emission wavelength of the light-emitting diode chip. The fabrication test on the InGaN chip indicates the Ca{sub 14}Mg{sub 2}(SiO{sub 4}){sub 8}:Eu{sup 2+} phosphor could be promising candidate for white light-emitting diodes.

36 MATERIALS SCIENCE↗

Photoluminescent and thermal properties of (Sr{sub 0.995−x−y−z}Ca{sub x}Ba{sub y}Mg{sub z}){sub 2}SiO{sub 4}:0.01Eu{sup 2+} phosphors for warm white light-emitting diodes

Highlights: • The photoluminescent property of Sr{sub 2}SiO{sub 4}:Eu{sup 2+} is improved by doping Ca{sup 2+} and Ba{sup 2+}. • The emission spectra red-shift obviously by doping Ca{sup 2+} into Sr{sub 2}SiO{sub 4}:Eu{sup 2+}. • The thermal stability is enhanced by doping Ba{sup 2+} into (Sr,Ca){sub 2}SiO{sub 4}:Eu{sup 2+}. • The improved phosphors can combine blue-LED chips to generate warm white light. - Abstract: A series of phosphors (Sr{sub 0.995−x−y−z}Ca{sub x}Ba{sub y}Mg{sub z}){sub 2}SiO{sub 4}:0.01Eu{sup 2+} (0 ≤ x ≤ 0.45, 0 ≤ y ≤ 0.015, 0 ≤ z ≤ 0.35) were synthesized by solid state reaction. Their phase compositions and photoluminescent properties were investigated in detail. The X-ray diffraction analysis indicates the impurity phase of SrSiO{sub 3} is formed only when z ≥ 0.25. A photoluminescence investigation shows, with x increasing the emission spectra of the phosphors (0 ≤ x ≤ 0.45, 0 ≤ y ≤ 0.015, z = 0) obviously red-shift, the corresponding color tones shift from yellow to orange–yellow and their CCTs reduce from 2875 to 2237 K. All the results are beneficial for the phosphors to combining blue light-emitting diode chips to generate warm white light. Besides, the thermal stability of the phosphor (x = 0.36, y = z = 0) is enhanced by doping Ba{sup 2+}, due to the greater activation energy for the compounds containing barium.

36 MATERIALS SCIENCE↗

Photoluminescence studies of high-efficient red-emitting K{sub 2}Y(WO{sub 4})(PO{sub 4}):Eu{sup 3+} phosphor for NUV LED

Highlights: • Novel K{sub 2}Y(WO{sub 4})(PO{sub 4}):Eu{sup 3+} red phosphors were prepared by solid-state method. • Phosphors exhibit strong red light under NUV excitation with quantum efficiency of 70.5 %. • Judd–Ofelt analysis ascertains the presence of Eu{sup 3+} in a highly asymmetric environment. • The red LED prototype was fabricated with KYWP:Eu{sup 3+} phosphor and InGaN chip. - Abstract: A series of high-efficient red-emitting phosphors K{sub 2}Y(WO{sub 4})(PO{sub 4}):Eu{sup 3+} have been successfully synthesized by conventional solid-state reaction, and its photoluminescence (PL) properties have been investigated. The phosphors can be excited efficiently by NUV light, then exhibit strong red emission with quantum efficiency of 70.5%. The concentration quenching takes place at relatively high concentration of Eu{sup 3+} (x = 0.70), which is further confirmed by the variation of decay curves of the entitled phosphors. Judd–Ofelt analysis ascertains the presence of Eu{sup 3+} in a highly asymmetric environment. The phosphor exhibits good thermal stability (92.5% at 100 °C and 84.1% at 180 °C). The red LED prototype fabricated by opyimized-composition K{sub 2}Y(WO{sub 4})(PO{sub 4}):0.70Eu{sup 3+} phosphor and 395 nm-emitting InGaN chips exhibit bright red emission. The results indicate that the K{sub 2}Y(WO{sub 4})(PO{sub 4}):Eu{sup 3+} phosphors are promising red phosphors for NUV LED.

36 MATERIALS SCIENCE↗

Mn4+/Zn2+:YAG glass ceramic for light emitting devices

Highlights: • Luminescence of Mn{sup 4+}:YAG red phosphor was enhanced via Zn{sup 2+} doping. • Mn{sup 4+}/Zn{sup 2+}:YAG GC was successfully prepared via one-step low temperature co-sintering technique. • A series of lighting device was achieved by coupling the Mn{sup 4+}/Zn{sup 2+}:YAG GC with the commercial blue chips and Ce{sup 3+}:LuAG GC. - Abstract: The rare-earth-free Mn{sup 4+}-activated oxide red phosphors draw great attention for their potential applications in the field of light-emitting diodes (LEDs). In this work, the red-emitting Mn{sup 4+}/Zn{sup 2+}:Y{sub 3}Al{sub 5}O{sub 12} phosphor, showing strong red emission peaked at ∼ 672 nm as a result of the spin-forbidden {sup 2}E{sub 2g} → {sup 4}A{sub 2g} electron transition of Mn{sup 4+} ions under 478 nm excitation, was synthesized by a traditional solid-state reaction route in air. The microstructure and luminescent performance of this red-emission phosphor was investigated in detail. From the experimentally measured spectroscopic data, the crystal field strength (Dq) and the Racah parameters B and C were calculated, respectively. In addition, Zn{sup 2+} dopant was found to be beneficial for enhancing Mn{sup 4+} luminescence. Subsequently, Mn{sup 4+}/Zn{sup 2+}:YAG glass ceramic was successfully prepared via using Mn{sup 4+}/Zn{sup 2+}:YAG phosphors incorporated into tellurate glass. A tunable lighting device was successfully achieved by coupling the red-emitting Mn{sup 4+}/Zn{sup 2+}:YAG GC with the commercial blue chips and Ce{sup 3+}:Lu{sub 3}Al{sub 5}O{sub 12} GC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-step synthesis of a novel red-emitting Ba2ZrF8:Mn4+ phosphor for warm white light-emitting diodes

Highlights: • A novel red-emitting Ba{sub 2}ZrF{sub 8}:Mn{sup 4+} was prepared by two-step method at low temperature. • The phosphor shows an intense red emission under 460 nm excitation matching well with blue LED chip. • The energy transfer between Mn{sup 4+} was confirmed to be electric dipole-quadrupole interaction. - Abstract: A novel red-emitting Ba{sub 2}ZrF{sub 8}: Mn{sup 4+} phosphor was prepared by two-step method at low temperature, where critical precursor K{sub 2}MnF{sub 6} was prepared first by the reduction of KMnO{sub 4} using H{sub 2}O2 as reducer. The crystal structure and morphology of the phosphor was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS), showing single phase product. Luminescent properties of the phosphor were investigated by photoluminescence spectroscopy (PL) and decay curves. The molar ratio of KMnO{sub 4}: KHF{sub 2} was confirmed to play the key role in improving the luminous efficiency. More importantly, the phosphor exhibits a broadband excitation from 300 to 520 nm due to {sup 4}A{sub 2g}→{sup 4}T{sub 1g} and {sup 4}A{sub 2g}→{sup 4}T{sub 2g} transition of Mn{sup 4+}, matching well with blue LED chips. Under 465 nm excitation, intense red emission at around 630 nm with high color purity is achieved, suggesting the red-emitting phosphor has great potential for white light-emitting diodes (wLEDs).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PHD Finger Recognition of Unmodified Histone H3R2 Links UHRF1 to Regulation of Euchromatic Gene Expression

Histone methylation occurs on both lysine and arginine residues, and its dynamic regulation plays a critical role in chromatin biology. Here we identify the UHRF1 PHD finger (PHD{sub UHRF1}), an important regulator of DNA CpG methylation, as a histone H3 unmodified arginine 2 (H3R2) recognition modality. This conclusion is based on binding studies and cocrystal structures of PHD{sub UHRF1} bound to histone H3 peptides, where the guanidinium group of unmodified R2 forms an extensive intermolecular hydrogen bond network, with methylation of H3R2, but not H3K4 or H3K9, disrupting complex formation. We have identified direct target genes of UHRF1 from microarray and ChIP studies. Importantly, we show that UHRF1's ability to repress its direct target gene expression is dependent on PHD{sub UHRF1} binding to unmodified H3R2, thereby demonstrating the functional importance of this recognition event and supporting the potential for crosstalk between histone arginine methylation and UHRF1 function.

08 HYDROGEN↗

3D printing technologies for electrochemical energy storage

Fabrication of electrodes and electrolytes play an important role in promoting the performance of electrochemical energy storage (EES) devices such as batteries and supercapacitors. Traditional fabrication techniques have limited capability in controlling the geometry and architecture of the electrode and solid-state electrolytes, which would otherwise compromise the performance. 3D printing, a disruptive manufacturing technology, has emerged as an innovative approach to fabricating EES devices from nanoscale to macroscale and from nanowatt to megawatt, providing great opportunities to accurately control device geometry (e.g., dimension, porosity, morphology) and structure with enhanced specific energy and power densities. Moreover, the additive manufacturing nature of 3D printing provides excellent controllability of the electrode thickness with much simplified process in a cost effective manner. With the unique spatial and temporal material manipulation capability, 3D printing can integrate multiple nanomaterials in the same print, and multi-functional EES devices (including functional gradient devices) can be fabricated. Herein, we review recent advances in 3D printing of EES devices. We focused on two major 3D printing technologies including direct writing and inkjet printing. The direct material deposition characteristics of these two processes enable them to print on a variety of flat substrates, even a conformal one, well suiting them to applications such as wearable devices and on-chip integrations. Other potential 3D printing techniques such as freeze nano-printing, stereolithography, fused deposition modeling, binder jetting, laminated object manufacturing, and metal 3D printing are also introduced. The advantages and limitations of each 3D printing technology are extensively discussed. More importantly, we provide a perspective on how to integrate the emerging 3D printing with existing technologies to create structures over multiple length scale from macro to nano for EES applications.

3D printing↗

Production and performance of the silicon sensor and readout electronics for the PHENIX FVTX tracker

The Forward Silicon Vertex Tracker (FVTX) upgrade for the PHENIX detector at RHIC will extend the vertex capability of the central PHENIX Silicon Vertex Tracker (VTX). The FVTX is designed with adequate spatial resolution to separate decay muons coming from the relatively long-lived heavy quark mesons (Charm and Beauty), from prompt particles and the longer-lived pion and kaon decays that originate at the primary collision vertex. These heavy quarks can be used to probe the high density medium that is formed in Au+Au collisions at RHIC. The FVTX is designed as two endcaps. Each endcap is comprised of four silicon disks covering opening angles from 10 to 35 degrees to match the existing muon arm acceptance. Each disk consists of p-on-n, silicon wedges, with ac-coupled mini-strips on 75 {micro}m radial pitch and proj ective length in the phi direction that increases with radius. A custom front-end chip, the FPHX, has been designed for the FVTX. The chip combines fast trigger capability with data push architecture in a low power design.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charge collection in irradiated HV-CMOS detectors

Active silicon detectors built on p-type substrate are a promising technological solution for large area silicon trackers such as those at the High Luminosity LHC, but the radiation hardness of this novel approach has to be evaluated. Active n-in-p strip detector prototypes CHESS2 for ATLAS with different substrate resistivities in the range of 20-1000 Omega cm were irradiated with neutrons and protons up to a fluence of 2 x 10(15) n(eq) cm(-2) and 3.6 x 10(15) n(eq) cm(-2). Charge collection in passive test structures on the chip was evaluated using Edge-TCT and minimum ionising electrons from Sr-90. Results were used to assess radiation hardness of the detector in the given fluence range and to determine parameters of initial acceptor removal in different substrates.

active silicon detectors↗

Performance of CMOS pixel sensor prototypes in ams H35 and aH18 technology for the ATLAS ITk upgrade

Pixel sensors based on commercial high-voltage CMOS processes are an exciting technology that is considered as an option for the outer layer of the ATLAS inner tracker upgrade at the High Luminosity LHC. Here, charged particles are detected using deep n-wells as sensor diodes with the depleted region extending into the silicon bulk. Both analog and digital readout electronics can be added to achieve different levels of integration up to a fully monolithic sensor. Small scale prototypes using the ams CMOS technology have previously demonstrated that it can achieve the required radiation tolerance of 10(15) n(eq)/cm(2) and detection efficiencies above 99.5%. Recently, large area prototypes, comparable in size to a full sensor, have been produced that include most features required towards a final design: the H35demo prototype produced in ams H35 technology that supports both external and integrated readout and the monolithic ATLASPix1 pre-production design produced in ams aH18 technology. Both chips are based on large fill-factor pixel designs, but differ in readout structure. Performance results for H35DEMO with capacitively-coupled external readout and first results for the monolithic ATLASPix1 are shown.

ATLAS ITk upgrade↗

Quality Assurance methodology for the ATLAS Inner Tracker strip sensor production

The production of the strip sensors for the ATLAS Inner Tracker (ITk) will start in 2020. Nearly 22,000 large area sensors will be produced over a period of about five years by Hamamatsu Photonics K.K. (HPK). The institutes involved in the sensor development and production are committed to deliver and maintain the highest quality sensors for the experiment. A Quality Assurance (QA) strategy has been prepared to be carried out during the whole production period. Once the process has been characterized as providing the required pre-irradiation specifications and the proper radiation hardness, the onus is on the manufacturer to rigidly stick to that qualified process. Still, sample testing with specific device-element structures and irradiation of devices should be implemented by the ITk sensor collaboration. A detailed irradiation and testing plan has been prepared by the ATLAS-ITk Collaboration, together with a newly designed test chip with specific structures to monitor different key technological and device parameters during the whole production. The tests and irradiations will be carried out on a sample basis. In order to have a practical methodology, samples from alternating batches will be sent for irradiations with protons, neutrons and gammas, and then tested in order to check that the characteristics remain within specifications. Here we present the detailed plan and the design and test methods for the structures in the test chip.

47 OTHER INSTRUMENTATION↗

The Timepix4 analog front-end design: Lessons learnt on fundamental limits to noise and time resolution in highly segmented hybrid pixel detectors

This manuscript describes the optimization of the front-end readout electronics for high granularity hybrid pixel detectors. The theoretical study aims at minimizing the noise and jitter. The model presented here is validated with both circuit post layout simulations and measurements on the Timepix4 Application Specific Integrated Circuit (ASIC). The analog front-end circuit and the procedure to optimize the dimensions of the main transistors are described with detail. The Timepix4 is the most recent ASIC designed in the framework of the Medipix4 Collaboration. It was manufactured in 65nm CMOS process, and consists of a four side buttable matrix of 448 × 512 pixels with 55µm pitch. The analog front-end has a gain of ~36mV/ke - when configured in High Gain Mode, and ~20mV/ke - when configured in Low Gain Mode. The Equivalent Noise Charge (ENC) is ~68e - rms and ~80e - rms in High Gain Mode and in Low Gain Mode respectively. In event driven mode the incoming hits can be time stamped within a ~ 200ps time bin and the chip can deal with a maximum flux of ~ 3.6MHzmm –2 s –1 . In photon counting mode, the chip can deal with up to ~ 5GHzmm –2 s –1 . The routine designed to optimize the Timepix4 front-end is then used to analyze the performance limits in terms of jitter and noise for Charge Sensitive Amplifiers in pixel detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

In-pixel AI for lossy data compression at source for X-ray detectors

Integrating neural networks for data compression directly in the Read-Out Integrated Circuits (ROICs), i.e. the pixelated front-end, would result in a significant reduction in off-chip data transfer, overcoming the I/O bottleneck. Our ROIC test chip (AI-In-Pixel-65) is designed in a 65 nm Low Power CMOS process for the readout of pixelated X-ray detectors. Each pixel consists of an analog front-end for signal processing and a 10b analog-to-digital converter operating at 100KSPS. Here, we compare two non-reconfigurable techniques, Principal Component Analysis (PCA) and an AutoEncoder (AE) as lossy data compression engines implemented within the pixelated area. The PCA algorithm achieves 50$×$ compression, adds one clock cycle latency, and results in a 21% increase in the pixel area. The AE achieves 70$×$ compression, adds 30 clock cycle latency, and results in a similar area increase.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evaluation of 3D pixel silicon sensors for the CMS Phase-2 Inner Tracker

The high-luminosity upgrade of the CERN LHC requires the replacement of the CMS tracking detector to cope with the increased radiation fluence while maintaining its excellent performance. An extensive R&D program, aiming at using 3D pixel silicon sensors in the innermost barrel layer of the detector, has been carried out by CMS in collaboration with the FBK (Trento, Italy) and CNM (Barcelona, Spain) foundries. The sensors will feature a pixel cell size of 25 × 100 µm 2 , with a centrally located electrode connected to the readout chip. The sensors are read out by the RD53A and CROCv1 chips, developed in 65 nm CMOS technology by the RD53 Collaboration, a joint effort between the ATLAS and CMS groups. This paper reports the results achieved in beam test experiments before and after irradiation, up to a fluence of approximately 2 . 6 × 1 0 16 n eq /cm 2 . Measurements of assemblies irradiated to a fluence of 1 × 10 16 n˙eq/cm 2 show a hit detection efficiency higher than 96% at normal incidence, with fewer than 2% of channels masked, across a bias voltage range greater than 50 V . Even after irradiation to a higher fluence of 1.6 × 10 16 n˙eq/cm 2 , similar performance is maintained over a bias voltage range of 30 V , remaining well within CMS requirements.

3D pixel↗

Methane generation from low-maturity coals and shale source rocks at low temperatures (80–120 °C) over 14–38 months

This study contributes long-term (14 to 38 months) experimental evidence for geocatalytically mediated methanogenesis in immature to early mature shale and coal source rocks at temperatures from 80 to 120 °C. Borosilicate glass tubes with pre-outgassed coal and shale source rock chips and water were sealed under vacuum, sterilized, heated isothermally, and finally opened in connection with a vacuum line where headspace gases methane (CH 4 ) and carbon dioxide (CO 2 ) were collected. The possibility of admitting pre-existing CH 4 from closed pores into product gases during heating experiments was evaluated by comparative ball milling of original and heated rock chips, followed by quantitation of released gases with a novel closed-circuit laser-based SARAD RTM2200 gas detector system with sub-µmol sensitivity. The yields of produced CH 4 from individual source rocks were corrected by subtracting the amounts of pre-existing CH 4 from formerly closed pores in original source rocks that had leaked during long-term heating. Different shales and coals express contrasting propensities to geocatalytically generate CH 4 and CO 2 , with CH 4 yields ranging from 0.1 to 5.5 µmol g-1 total organic carbon (TOC). CH 4 yields from two petrographically different samples of Springfield Coal with comparable thermal maturity suggest that liptinite expresses a far higher propensity for methanogenesis, but liberates less CO 2 than vitrinite. Shale from the Second White Specks Formation generated approximately 10 times more CH 4 than New Albany Shale per g of TOC, further suggesting complex controls on CH 4 generation during catalytic methanogenesis. Higher temperature can enhance the activities of catalytic methanogenesis. Here, the extrapolation of laboratory-based reaction rates to natural conditions in organic-rich buried sediments suggests that geocatalytic methanogenesis can be fast enough in some source rocks to generate economically sizeable gas plays from immature to early mature source rocks over geologic time.

03 NATURAL GAS↗

Test suite for evaluating performance of multithreaded MPI communication.

As parallel systems are commonly being built out of increasingly large multicore chips, application programmers are exploring the use of hybrid programming models combining MPI across nodes and multithreading within a node. Many MPI implementations, however, are just starting to support multithreaded MPI communication, often focussing on correctness first and performance later. As a result, both users and implementers need some measure for evaluating the multithreaded performance of an MPI implementation. In this paper, we propose a number of performance tests that are motivated by typical application scenarios. These tests cover the overhead of providing the MPI-THREAD-MULTIPLE level of thread safety for user programs, the amount of concurrency in different threads making MPI calls, the ability to overlap communication with computation, and other features. We present performance results with this test suite on several platforms (Linux cluster, Sun and IBM SMPs) and MPI implementations (MPICH2, Open MPI, IBM, and Sun).

99 GENERAL AND MISCELLANEOUS↗

Frictional Contacts Between Individual Woody Biomass Particles under Wet and Dry Conditions

Friction between wood particles can be a critical property when designing processing equipment for creating cellulosic biofuels and similar natural products. Also, as wood processing is likely to occur year-round, understanding the friction between wet as well as dry wood particles can help design and model equipment, such as screw feeders. Here, a tribo-rheometry method was developed using a commercial rheometer that measured the torque required to rotate two contacting millimeter-scale wood chip particles. First, a range of normal forces were used to find the limits of the experimental method. Torque values were measured for seven pairs of wood chip particles at 1 N normal force under both dry and wet conditions, at both ambient conditions and in a humidity-controlled chamber. The torque required to rotate the wet particles was consistently higher than that of the dry particles, although differences were not quite statistically significant when measurements were performed at ambient conditions. Using humidity control resulted in torque values for wet particles of 1900 uNm and 900 uNm for dry particles. Finally, the friction coefficient was calculated as 0.23 for wet particles and 0.11 for dry particles when humidity was controlled. These frictions coefficients agreed with values for wood reported in the literature. Overall, controlling humidity is strongly recommended to quantify the range of friction for particles that uptake water, including granular systems from biomass to food to powders.

biomass↗