Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WEIGHTLESSNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Microgravity simulations with human lymphocytes in the free fall machine and in the random positioning machine

The purpose of this paper is to present the results obtained in our laboratory with both instruments, the FFM [free fall machine] and the RPM [random positioning machine], to compare them with the data from earlier experiments with human lymphocytes conducted in the FRC [fast rotating clinostat] and in space. Furthermore, the suitability of the FFM and RPM for research in gravitational cell biology is discussed.

Rotation↗

Deposition and dispersion of 1-micrometer aerosol boluses in the human lung: effect of micro- and hypergravity

We performed bolus inhalations of 1-micrometer particles in four subjects on the ground (1 G) and during parabolic flights both in microgravity (microG) and in approximately 1.6 G. Boluses of approximately 70 ml were inhaled at different points in an inspiration from residual volume to 1 liter above functional residual capacity. The volume of air inhaled after the bolus [the penetration volume (Vp)] ranged from 200 to 1,500 ml. Aerosol concentration and flow rate were continuously measured at the mouth. The deposition, dispersion, and position of the bolus in the expired gas were calculated from these data. For Vp >/=400 ml, both deposition and dispersion increased with Vp and were strongly gravity dependent, with the greatest deposition and dispersion occurring for the largest G level. At Vp = 800 ml, deposition and dispersion increased from 33.9% and 319 ml in microG to 56.9% and 573 ml at approximately 1.6 G, respectively (P < 0.05). At each G level, the bolus was expired at a smaller volume than Vp, and this volume became smaller with increasing Vp. Although dispersion was lower in microG than in 1 G and approximately 1.6 G, it still increased steadily with increasing Vp, showing that nongravitational ventilatory inhomogeneity is partly responsible for dispersion in the human lung.

Parabolic Flight↗

Animal models and their importance to human physiological responses in microgravity

Two prominent theories to explain the physiological effects of microgravity relate to the cascade of changes associated with the cephalic shifts of fluids and the absence of tissue deformation forces. One-g experiments for humans used bed rest and the head-down tilt (HDT) method, while animal experiments have been conducted using the tail-suspended, head-down, and hindlimbs non-weightbearing model. Because of the success of the HDT approach with rats to simulate the gravitational effects on the musculoskeletal system exhibited by humans, the same model has been used to study the effects of gravity on the cardiopulmonary systems of humans and other vertebrates. Results to date indicate the model is effective in producing comparable changes associated with blood volume, erythropoiesis, cardiac mass, baroreceptor responsiveness, carbohydrate metabolism, post-flight VO2max, and post-flight cardiac output during exercise. Inherent with these results is the potential of the model to be useful in investigating responsible mechanisms. The suspension model has promise in understanding the capillary blood PO2 changes in space as well as the arterial PO2 changes in subjects participating in a HDT experiment. However, whether the model can provide insights on the up-or-down regulation of adrenoreceptors remains to be determined, and many investigators believe the HDT approach should not be followed to study gravitational influences on pulmonary function in either humans or animals. It was concluded that the tail-suspended animal model had sufficient merit to study in-flight and post-flight human physiological responses and mechanisms.

NASA Discipline Cardiopulmonary↗

The effect of simulated microgravity on bacteria from the Mir space station

The effects of simulated microgravity on two bacterial isolates, Sphingobacterium thalpophilium and Ralstonia pickettii (formerly Burkholderia pickettii), originally recovered from water systems aboard the Mir space station were examined. These bacteria were inoculated into water, high and low concentrations of nutrient broth and subjected to simulated microgravity conditions. S. thalpophilium (which was motile and had flagella) showed no significant differences between simulated microgravity and the normal gravity control regardless of the method of enumeration and medium. In contrast, for R. pickettii (that was non-motile and lacked flagella), there were significantly higher numbers in high nutrient broth under simulated microgravity compared to normal gravity. Conversely, when R. pikkettii was inoculated into water (i.e., starvation conditions) significantly lower numbers were found under simulated microgravity compared to normal gravity. Responses to microgravity depended on the strain used (e.g., the motile strain exhibited no response to microgravity, while the non-motile strain did), the method of enumeration, and the nutrient concentration of the medium. Under oligotrophic conditions, non-motile cells may remain in geostationary orbit and deplete nutrients in their vicinity, while in high nutrient medium, resources surrounding the cell may be sufficient so that high growth is observed until nutrients becoming limiting.

Non-NASA Center↗

Countermeasure for space flight effects on immune system: nutritional nucleotides

Microgravity and its environment have adverse effects on the immune system. Abnormal immune responses observed in microgravity may pose serious consequences, especially for the recent directions of NASA for long-term space missions to Moon, Mars and deep Space exploration. The study of space flight immunology is limited due to relative inaccessibility, difficulty of performing experiments in space, and inadequate provisions in this area in the United States and Russian space programs (Taylor 1993). Microgravity and stress experienced during space flights results in immune system aberration (Taylor 1993). In ground-based mouse models for some of the microgravity effects on the human body, hindlimb unloading (HU) has been reported to cause abnormal cell proliferation and cytokine production (Armstrong et al., 1993, Chapes et al. 1993). In this report, we document that a nutritional nucleotide supplementation as studied in ground-based microgravity analogs, has potential to serve as a countermeasure for the immune dysfunction observed in space travel.

NASA Center JSC↗

Load-dependent regulation of neuromuscular system

Roles of gravitational loading, sarcomere length, and/or tension development on the electromyogram (EMG) of soleus and afferent neurogram recorded at the L5 segmental level of spinal cord were investigated during parabolic flight of a jet airplane or hindlimb suspension in conscious rats. Both EMG and neurogram levels were increased when the gravity levels were elevated from 1-G to 2-G during the parabolic flight. They were decreased when the hindlimbs were unloaded by exposure to actual microgravity or by suspension. These phenomena were related to passive shortening of muscle fibers and/or sarcomeres. Unloading-related decrease in sarcomere length was greater at the central rather than the proximal and distal regions of fibers. These activities and tension development were not detected when the mean sarcomere length was less than 2.03 micrometers. It is suggested that load-dependent regulation of neuromuscular system is related to the tension development which is influenced by sarcomere length.

short duration↗

Verification andvalidationstudyofsomepolydispersekinetictheories

The predictionsofseveralpolydispersekinetictheoriesarepresentedinthisstudyforthesimpleshear flow ofabinarymixtureofpowderswithvaryingsizesinavacuumunderzerogravity.Theseresultsare compared topublishednumericaldataobtainedusingdiscretemoleculardynamicstechnique.Thetheory showing themostaccurateresultsismodifiedsothatthesumofthekineticstressesoftwoormore identical solidphasesaddstothatofamonodispersesystemwiththesameproperties.Simulationresults obtained inathree-dimensionalriserfortheflowofairandabinarymixtureofglassbeadsarecompared with availableexperimentaldataforeachsolid-phasevelocity,concentration,andgranulartemperature. The predictionsofthetheorycomparereasonablywellwithexperimentaldatawhenthevalueofthe linear particle–particlerestitutioncoefficientisloweredtotakeintoaccounttheextraenergydissipation due tocollisionsbetweenpairsofslightlyfrictionalparticles.

01 COAL, LIGNITE, AND PEAT↗

Numerical computations and optical diagnostics of unsteady partially premixed methane/air flames

The structures and dynamics of unsteady laminar partially premixed methane/air Bunsen flames are studied by means of numerical simulations, OH and CH PLIF imaging, and high speed chemiluminescence imaging employing a high framing speed intensified charge coupled device camera. The Bunsen burner has a diameter of 22 mm. Rich methane/air mixtures with an equivalence ratio of 1.5 are injected from the burner into atmosphere at different flow speeds ranging from 0.77 to 1.7 m/s, with Reynolds numbers based on the nozzle flow ranging from 1100 to 2500. The numerical simulations are based on a two-scalar flamelet manifold tabulation approach. Detailed chemistry is used to generate the flamelet manifold tabulation which relates the species concentrations, reaction rates, temperature and density to a distance function G and mixture fraction Z. Two distinct reaction zones are identified using CH and OH PLIF imaging and numerical simulations; one inner reaction zone corresponds to premixed flames on the rich side of the mixture and one outer reaction zone corresponds to mixing controlled diffusion flames on the lean side of the mixture. Under normal gravity conditions both the inner premixed flames and the outer diffusion flames are unsteady. The outer diffusion flames oscillate with a flickering frequency of about 15 Hz, which slightly increases with the burner exit velocity. The inner premixed flames are more random with much more small-scale wrinkling structures. Under zero gravity conditions the outer diffusion flames are stable whereas the inner premixed flames are unstable and highly wrinkled. It appears that the outer diffusion flames are governed by the Rayleigh-Taylor instability whereas the inner premixed flames are dictated by Landau-Darrieus instability. The two-scalar flamelet approach is shown to capture the basic structures and dynamics of the investigated unsteady partially premixed flames. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Force measurements in dusty plasmas under microgravity by means of laser manipulation

Experiments in a dusty plasma under the microgravity conditions of parabolic flights are presented. Under microgravity, extended dust structures and a central dust-free region ('void') are formed. Here, the forces and the force balance at the void boundary are studied by means of laser manipulation of the dust particles: A focused laser beam is moved in a controlled way to drive particles in the extended dust cloud and at the void boundary. From the observed particle motion, the forces on the particles in the dust cloud and at the void boundary are derived. Together with Langmuir probe measurements, a quantitative description of the force balance has been achieved. Special attention has been paid to the ion drag force, which is crucial in understanding the void formation. The results are compared to prevalent ion drag models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mass measuring instrument for use under microgravity conditions

A prototype instrument for measuring astronaut body mass under microgravity conditions has been developed and its performance was evaluated by parabolic flight tests. The instrument, which is the space scale, is applied as follows. Connect the subject astronaut to the space scale with a rubber cord. Use a force transducer to measure the force acting on the subject and an optical interferometer to measure the velocity of the subject. The subject's mass is calculated as the impulse divided by the velocity change, i.e., M={integral}Fdt/{delta}v. Parabolic flight by using a jet aircraft produces a zero-gravity condition lasting approximately 20 s. The performance of the prototype space scale was evaluated during such a flight by measuring the mass of a sample object.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spaceborne Lightcraft Applications--an Experimental Approach

An experimental approach is proposed for the near-term demonstration of space-borne laser propulsion. A feasibility study at the ZARM Drop Tower Bremen is planned. The facility provides microgravity conditions within a drop capsule for {approx}9 seconds. An excimer laser is used for energy beaming operating at a wavelength of 248 nm with max. 500 mJ pulse energy and a repetition rate of 250 Hz. Within the drop capsule, free flights of a lightcraft are intended to be conducted in air as well as under vacuum conditions. Different propellants are reviewed regarding their features for propulsion with a UV laser. The scalability of previous ground-based flight experiments is discussed with respect to microgravity conditions and moderate pulse energies. Space logistic and sample return missions are discussed as possible applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser Propulsion - Quo Vadis

First, an introductory overview of the different types of laser propulsion techniques will be given and illustrated by some historical examples. Second, laser devices available for basic experiments will be reviewed ranging from low power lasers sources to inertial confinement laser facilities. Subsequently, a status of work will show the impasse in which the laser propulsion community is currently engaged. Revisiting the basic relations leads to new avenues in ablative and direct laser propulsion for ground based and space based applications. Hereby, special attention will be devoted to the impact of emerging ultra-short pulse lasers on the coupling coefficient and specific impulse. In particular, laser sources and laser propulsion techniques will be tested in microgravity environment. A novel approach to debris removal will be discussed with respect to the Satellite Laser Ranging (SRL) facilities. Finally, some non technical issues will be raised aimed at the future prospects of laser propulsion in the international community.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

From Voids to Yukawaballs And Back

When dust particles are introduced in a radio-frequency discharge under micro-gravity conditions, usually a dust free void is formed due to the ion drag force pushing the particles away from the center. Experiments have shown that it is possible to close the void by reducing the power supplied to the discharge. This reduces the ion density and with that the ratio between the ion drag force and the opposing electric force. We have studied the behavior of a discharge with a large amount of dust particles (radius 3.4 micron) with our hydrodynamic model, and simulated the closure of the void for conditions similar to the experiment. We also approached the formation of a Yukawa ball from the other side, starting with a discharge at low power and injecting batches of dust, while increasing the power to prevent extinction of the discharge. Eventually the same situation could be reached.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional structure of self-excited dust density waves under microgravity conditions

Self-excited dust density waves in a dusty plasma, containing micrometer-sized particles, have been observed under microgravity conditions at low gas pressures and high dust densities. The waves emerge spontaneously and propagate from the void edge radially outwards to the plasma boundary. We found that the wave propagates obliquely to the local ion flow in regions with high electric fields close to the sheath, whereas it propagates parallel in the plasma bulk. So far the observation was limited to a fixed two-dimensional section through the discharge volume. Recent experiments were performed on parabolic flights in a parallel plate rf discharge, which used the technique of scanning video microscopy. This technique utilizes the high temporal coherence of the waves to reconstruct their full three-dimensional structure. The analysis yields a surprising global spatial coherence of the wave phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnosis in Complex Plasmas for Microgravity Experiments (PK-3 plus)

Microgravity gives the complex (dusty) plasmas, where dust particles are embedded in complete charge neutral region of bulk plasma. The dust clouds as an uncompressed strongly coupled Coulomb system correspond to atomic model with several physical phenomena, crystallization, phase transition, and so on. As the phenomena tightly connect to plasma states, it is significant to understand plasma parameters such as electron density and temperature. The present work shows the electron density in the setup for microgravity experiments currently onboard on the International Space Station.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural and Dynamical Properties of Microrod Dusty Plasma in a Uniform DC Discharge under Microgravity

In present experiment an ordering and dynamics of monodisperse nylon rods (D = 10 {mu}m, L = 300 {mu}m) in a uniform DC gas discharge plasma under microgravity have been investigated. Ordered rod structures were registered in DC discharge with a rod concentration of 400-8000 cm{sup -3} and a neon pressure range of 20-50 Pa. The structures revealed orientationally ordered hexagonal structures. DC discharge became unstable at rod number density more then 8000 cm{sup -3}. Rod drift velocities in a permanent electric field were measured for the neon pressure range. Dust acoustic instability ({nu}{approx}0.4{+-}0.1 Hz, {lambda}{approx}1.1{+-}0.4 cm, C{sub DAW}{approx}0.5 cm/s) in rod cloud was observed at a neon pressure of 25 Pa and a rod number density of 1500 cm{sup -3}. Using the 'low' frequency approximation of the linearized DAW dispersion relation and the measured rod drift velocity a rod electric charge had been estimated as Z{sub R}{approx}150000e.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗