Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIBRATION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Temperature-dependent structural studies of mullite-type Bi{sub 2}Fe{sub 4}O{sub 9}

We report on the temperature-dependent structural studies on the mullite-type Bi{sub 2}Fe{sub 4}O{sub 9} compound. The crystal structures were determined using both powder X-ray diffraction and single crystal neutron diffraction. The thermal expansion of the cell parameters from smallest to largest occurred in the order a<c<b; their expansion behavior was fit using either linear or nonlinear regression according to the region of choice. The anisotropic thermal expansion was monitored with respect to the expansion coefficients, anisotropy factor, and polyhedral geometry. At 900 K an abrupt change of the anisotropy factor is observed which correlates with a slope in the BiO{sub 6} polyhedral volume. At the same temperature the FeO{sub 4} tetrahedral distortion starts to increase. The temperature-dependent stereochemically activity of the Bi{sup 3+} 6s{sup 2} lone electron pair was probed by the absolute value of eccentricity parameter. This parameter shows a significant drop at around 773 K. Additionally, the average crystal size and micro-strain of the powder samples were studied. A healing of intrinsic defects is observed with respect to a decreasing micro-strain followed by crystal growth above about 900 K. The temperature-dependent infrared spectra were described in three distinct zones. Deconvolution of the absorption features between 370 cm{sup -1} and 1000 cm{sup -1} required nine fitted bands, and the decomposed Pseudo-Voigt elements were assigned to Fe-O stretching, Fe-O-Fe bending and O-Fe-O bending vibrations. The shift of the observed modes was described with respect to temperature. An effective linewidth parameter {Delta}corr was determined by autocorrelation analysis between 740 cm{sup -1} and 900 cm{sup -1} for each temperature-dependent spectrum. The break of the slope of {Delta}corr at about 773 K was interpreted as the change of some vibrational modes of the FeO{sub 4} tetrahedra. The intrinsic effects observed around 773 K are responsible for extrinsic parameter changes found around 900 K. - Graphical abstract: Temperature-dependent stereochemical activity (eccentricity |{Phi}{sub i}|) of the Bi{sup 3+} 6s{sup 2} lone electron pair directing in the non-bonded region of the Bi-O coordination in the Bi{sub 2}Fe{sub 4}O{sub 9} iron framework (given as polyhedra). Highlights: Black-Right-Pointing-Pointer Complex expansion-contraction mechanism explains anisotropic thermal expansion. Black-Right-Pointing-Pointer Bi 6s{sup 2} lone electron pair sphericity influences analyses by FTIR autocorrelation. Black-Right-Pointing-Pointer Intrinsic effects at 773 K are responsible for extrinsic parameter changes at 900 K.

36 MATERIALS SCIENCE↗

Effect of cation ordering on the electronic and lattice dynamic properties of Ag₂CdGeS₄ polytypes: First-principle calculation

The electronic and lattice dynamic properties of I₂–II–IV–VI₄ quaternary diamond-like semiconductors have a tight connection with their application in the area of solar cell absorption, thermoelectric conversion and so on. Structural configuration of these compounds is focused in present study, although previous researches always pay close attention to compositional modulation. In this paper, Ag₂CdGeS₄ polytypes (two types of Pna2₁, one type of Pmn2₁) have chosen as the representation to establish the relationship between cation ordering and physiochemical properties based on first-principle theory. The results show that cation arrangement practically affects their electronic and lattice dynamic properties such as bonding strength, band structure as well as their infrared spectrum. Due to different cation arrangement, two types (named model S and model P) of the same space group Pna2₁ demonstrate different properties. For both model P and Pmn2₁ of different space group, their related properties are alike because of similar cation arrangement. With the resulting cationic Born effective charges, the origin of the difference in electronic properties for three types of Ag₂CdGeS₄ can be reasonably explained from the viewpoint of vibrational polarization. - Graphical abstract: First-principle calculations were used to investigate the effect of cation ordering on the electronic and lattice dynamic properties of Ag₂CdGeS₄ polytypes. Highlights: • Structural configuration was focused other than compositional modulation. • Establish the relationship between cation ordering and physicochemical properties. • Explain the reason of different band gap with Born effective charges. • Calculated infrared spectrum can be used to distinguish different polytypes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Achieving precise multiparameter measurements with distributed optical fiber sensor using wavelength diversity and deep neural networks

The development of advanced distributed optical fiber sensing systems that are capable of performing accurate and spatially resolved multiparameter measurements is of great interest to a wide range of scientific and industrial applications. Here, in this paper, we propose and experimentally demonstrate a wavelength diversity based advanced distributed optical fiber sensor system to accomplish multiparameter sensing while greatly enhancing measurement accuracy. A suite of deep neural network (DNN) algorithms are developed and verified for data denoising, rapid Brillouin frequency shift estimation, and vibration data event classification. As a proof-of-concept, we demonstrate the effectiveness of the proposed advanced wavelength diversity distributed fiber sensor system assisted by DNN for simultaneous, independent measurements of static strain, temperature, and acoustic vibrations over a 25 km long sensing fiber at 3 m spatial resolution. These results suggest the potential for an intelligent multiparameter monitoring system with enhanced performance in advanced structural health monitoring applications.

47 OTHER INSTRUMENTATION↗

Simulations of the IR and Raman spectra of water confined in amorphous silica slit pores

Water in nano-scale confining environments is a key element in many biological, material, and geological systems. The structure and dynamics of the liquid can be dramatically modified under these conditions. Probing these changes can be challenging, but vibrational spectroscopy has emerged as a powerful tool for investigating their behavior. A critical, evolving component of this approach is a detailed understanding of the connection between spectroscopic features and molecular-level details. In this paper, this issue is addressed by using molecular dynamics simulations to simulate the linear infrared (IR) and Raman spectra for isotopically dilute HOD in D 2 O confined in hydroxylated amorphous silica slit pores. The effect of slit-pore width and hydroxyl density on the silica surface on the vibrational spectra is also investigated. The primary effect of confinement is a blueshift in the frequency of OH groups donating a hydrogen bond to the silica surface. This appears as a slight shift in the total (measurable) spectra but is clearly seen in the distance-based IR and Raman spectra. Analysis indicates that these changes upon confinement are associated with the weaker hydrogen-bond accepting properties of silica oxygens compared to water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Instantaneous response of elastic thin-walled structures with arbitrary open cross section to rapid heating

A generalized modeling and analysis approach of thermally-induced coupled vibrations of elastic thin-walled configurations with arbitrary open cross sections are presented in conjunction with a unified implicit transient methodology. Limited research appears in literature which takes into account the influence of rapid thermal heating effects on structures involving various forms of coupling. As a consequence, the dynamic response of such thin-walled structures of arbitrary open cross section due to rapid heating are described here. Effects involving triple, double, and no coupling between bending and torsional vibrations caused by sudden heating on these structures are examined. Numerical test cases are presented which describe the influence of sudden heating on elastic thin-walled structures of arbitrary open cross sections.

Chen, Xiaoqin↗

Solar Sails

The Solar Sail Propulsion investment area has been one of the three highest priorities within the In-Space Propulsion Technology (ISPT) Project. In the fall of 2003, the NASA Headquarters' Science Mission Directorate provided funding and direction to mature the technology as far as possible through ground research and development from TRL 3 to 6 in three years. A group of experts from government, industry, and academia convened in Huntsville, Alabama to define technology gaps between what was needed for science missions to the inner solar system and the current state of the art in ultra1ightweight materials and gossamer structure design. This activity set the roadmap for development. The centerpiece of the development would be the ground demonstration of scalable solar sail systems including masts, sails, deployment mechanisms, and attitude control hardware and software. In addition, new materials would be subjected to anticipated space environments to quantify effects and assure mission life. Also, because solar sails are huge structures, and it is not feasible to validate the technology by ground test at full scale, a multi-discipline effort was established to develop highly reliable analytical models to serve as mission assurance evidence in future flight program decision-making. Two separate contractor teams were chosen to develop the SSP System Ground Demonstrator (SGD). After a three month conceptual mission/system design phase, the teams developed a ten meter diameter pathfinder set of hardware and subjected it to thermal vacuum tests to compare analytically predicted structural behavior with measured characteristics. This process developed manufacturing and handling techniques and refined the basic design. In 2005, both contractor teams delivered 20 meter, four quadrant sail systems to the largest thermal vacuum chamber in the world in Plum Brook, Ohio, and repeated the tests. Also demonstrated was the deployment and articulation of attitude control mechanisms. In conjunction with these tests, the stowed sails were subjected to launch vibration and ascent vent tests. Other investments studied radiation effects on the solar sail materials, investigated spacecraft charging issues, developed shape measuring techniques and instruments, produced advanced trajectory modeling capabilities, and identified and resolved gossamer structure dynamics issues. Technology validation flight and application to a He1iophysics science mission is on the horizon.

Young, Roy↗

Assessment of mode-mixing and Herzberg-Teller effects on two-photon absorption and resonance hyper-Raman spectra from a time-dependent approach

A time-dependent approach is presented to simulate the two-photon absorption (TPA) and resonance hyper-Raman scattering (RHRS) spectra including Duschinsky rotation (mode-mixing) and Herzberg-Teller (HT) vibronic coupling effects. The computational obstacles for the excited-state geometries, vibrational frequencies, and nuclear derivatives of transition dipole moments, which enter the expressions of TPA and RHRS cross sections, are further overcome by the recently developed analytical excited-state energy derivative approaches in the framework of time-dependent density functional theory. The excited-state potential curvatures are evaluated at different levels of approximation to inspect the effects of frequency differences, mode-mixing and HT on TPA and RHRS spectra. Two types of molecules, one with high symmetry (formaldehyde, p-difluorobenzene, and benzotrifluoride) and the other with non-centrosymmetry (cis-hydroxybenzylidene-2,3-dimethylimidazolinone in the deprotonated anion state (HDBI{sup −})), are used as test systems. The calculated results reveal that it is crucial to adopt the exact excited-state potential curvatures in the calculations of TPA and RHRS spectra even for the high-symmetric molecules, and that the vertical gradient approximation leads to a large deviation. Furthermore, it is found that the HT contribution is evident in the TPA and RHRS spectra of HDBI{sup −} although its one- and two-photon transitions are strongly allowed, and its effect results in an obvious blueshift of the TPA maximum with respect to the one-photon absorption maximum. With the HT and solvent effects getting involved, the simulated blueshift of 1291 cm{sup −1} agrees well with the experimental measurement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Gd3N@C2n (40 n 44) family by Raman and inelastic electron tunneling spectroscopy

The structure and vibrational spectrum of Gd3N@C80 is studied through Raman and inelastic electron tunneling spectroscopy as well as density-functional theory and universal force eld calculations. Hindered rotations, shown by both theory and experiment, indicate the formation of a Gd3N-C80 bond which reduces the ideal icosahedral symmetry of the C80 cage. The vibrational modes involving the movement of the encapsulated species are a ngerprint of the interaction between the fullerene cage and the core complex. We present Raman data for the Gd3N@C2n 40 n 44 family as well as Y3N@C80, Lu3N@C80, and Y3N@C88 for comparison. Conductance measurements have been performed on Gd3N@C80 and reveal a Kondo effect similar to that observed in C60.

36 MATERIALS SCIENCE↗

Composite vibrational spectroscopy of the group 12 difluorides: ZnF{sub 2}, CdF{sub 2}, and HgF{sub 2}

The vibrational spectra of group 12 difluorides, MF{sub 2} (M = Zn, Cd, Hg), were investigated via coupled cluster singles, doubles, and perturbative triples, CCSD(T), including core correlation, with a series of correlation consistent basis sets ranging in size from triple-zeta through quintuple-zeta quality, which were then extrapolated to the complete basis set (CBS) limit using a variety of extrapolation procedures. The explicitly correlated coupled cluster method, CCSD(T)-F12b, was employed as well. Although exhibiting quite different convergence behavior, the F12b method yielded the CBS limit estimates closely matching more computationally expensive conventional CBS extrapolations. The convergence with respect to basis set size was examined for the contributions entering into composite vibrational spectroscopy, including those from higher-order correlation accounted for through the CCSDT(Q) level of theory, second-order spin-orbit coupling effects assessed within four-component and two-component relativistic formalisms, and vibrational anharmonicity evaluated via a perturbative treatment. Overall, the composite results are in excellent agreement with available experimental values, except for the CdF{sub 2} bond-stretching frequencies compared to spectral assignments proposed in a matrix isolation infrared and Raman study of cadmium difluoride vapor species [Loewenschuss et al., J. Chem. Phys. 50, 2502 (1969); Givan and Loewenschuss, J. Chem. Phys. 72, 3809 (1980)]. These assignments are called into question in the light of the composite results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental investigation of magnetic anisotropy in spin vortex discs

We present experimental 2D vector vibrating sample magnetometer measurements to demonstrate the shape anisotropy effects occurring in micrometer-diameter supermalloy spin vortex discs. Measurements made for different disc sizes and orientations confirm the out-of-plane susceptibility is several orders of magnitude smaller than the in-plane susceptibility. These results validate with a high certitude that spin vortices with high diameter to thickness ratio retain in-plane-only magnetization, even when subjected to fields in the out-of-plane direction. These results contribute to further computational simulations of the dynamics of spin vortex structures in colloidal suspensions where external fields may be applied in any arbitrary direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application of a multi-beam vibrometer on industrial components

Laser Doppler vibrometry is a well proven tool for the non-contact measurement of vibration. The scanning of several measurement points allows to visualize the deflection shape of the component, ideally a 3D-operating deflection shape, if a 3-D scanner is applied. Measuring the points sequentially, however, requires stationary behavior during the measurement time. This cannot be guaranteed for many real objects. Therefore, a multipoint laser Doppler vibrometer has been developed by Polytec and the University of Stuttgart with Bosch as industrial partner. A short description of the measurement system is given. Applications for the parallel measurement of the vibration of several points are shown for non-stationary vibrating Bosch components such as power-tools or valves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nozzle Flow with Vibrational Nonequilibrium

Flow of nitrogen gas through a converging-diverging nozzle is simulated. The flow is modeled using the Navier-Stokes equations that have been modified for vibrational nonequilibrium. The energy equation is replaced by two equations. One equation accounts for energy effects due to the translational and rotational degrees of freedom, and the other accounts for the affects due to the vibrational degree of freedom. The energy equations are coupled by a relaxation time which measures the time required for the vibrational energy component to equilibrate with the translational and rotational energy components. An improved relaxation time is used in this thesis. The equations are solved numerically using the Steger-Warming flux vector splitting method and the Implicit MacCormack method. The results show that uniform flow is produced outside of the boundary layer. Nonequilibrium exists in both the converging and diverging nozzle sections. The boundary layer region is characterized by a marked increase in translational-rotational temperature. The vibrational temperature remains frozen downstream of the nozzle, except in the boundary layer.

Landry, John Gary↗

Shapes, softness, and nonyrast collectivity in 186 W

Nonyrast, excited states in neutron-rich 186 W were populated via inelastic-scattering reactions using beams of 136 Xe nuclei accelerated to 725 and 800 MeV. Levels populated in the reactions were investigated via particle-γ coincidence techniques using the Gammasphere array of high-purity germanium detectors and the compact heavy-ion counter, CHICO2. The K π = 2 + (γ ), K π = 0 + and K π = 2 – (octupole) rotational side bands were extended to spins 14h¯, 12h¯, and 13h¯, respectively. A staggering pattern observed in the energies of levels in the K π = 2 + band was found to be consistent with a potential that gets softer to vibration in the γ degree of freedom with increasing spin. Furthermore, the odd-even staggering of states in the K π = 2 – band was found to exhibit a phase opposite to that seen in the γ band; an effect most probably associated with Coriolis coupling to other, unobserved octupole vibrational bands in 186 W.

150 ≤ A ≤ 189↗

Pilot-Scale Validation of Distributed Optical Fiber Sensors for Underground Pipeline Monitoring

Distributed fiber optic sensing is a cutting-edge technology that has found extensive applications in the monitoring of Ensuring the safety, integrity, and operational efficiency of underground product pipelines is vital for maintaining the nation’s critical infrastructure. Monitoring parameters such as hoop strain, pressure, and acoustic vibrations is key to detecting potential leaks, intrusions, or structural issues. Distributed optical fiber sensor (DOFS) systems provide a compelling solution for continuous, real-time monitoring over long distances. This paper details the development and pilot-scale implementation of DOFS systems for underground pipeline monitoring, evolving from a proof-of-concept stage. Multiple custom-designed DOFS interrogator units—such as optical frequency-domain reflectometry (OFDR), Brillouin optical time-domain analysis (BOTDA), and multimodal interferometer-based fiber acoustic sensors—were employed to measure key parameters like hoop strain, pressure, and acoustic vibrations. The underground product pipeline's outer diameter is 30 inches, the wall thickness is 1.28 inches, and the 3-foot depth. The fiber deployment strategies, and sensing data acquisition methods for these systems are discussed. The results demonstrate the effectiveness of DOFS in detecting hoop strain, temperature changes, and acoustic vibrations, showcasing their potential for real-time monitoring and enhancing pipeline safety.

distributed fiber sensing↗

The synergistic effects of central core size and end group engineering on performance of narrow bandgap nonfullerene acceptors

Understanding the relationship between the molecular structure and photoelectric properties of fused-ring non-fullerene acceptors (NFAs) is of far-reaching significance to the development of organic solar cells (OSCs). Herein, six NFAs based on multiple thiophenes (4 T, 6 T and 8 T) are employed to systematically probe the synergistic effects of extending central core size and terminal fluorination. The absorption results manifest that the molecular absorption is comprehensively affected by molecular crystallinity, planarity, conjugation length and intramolecular electron push–pull effect, simultaneously. The intensity of electron push–pull effect is not only related to the electron-donating ability of central core and the electron-withdrawing ability of end group, but also may be related to the distance between the positive and negative centers. The extension of central core leads to the more planar backbone and stronger crystallinity of NFAs, and less energy loss (E loss ) in its based OSC. Compared with the extension of central core, terminal fluorination has a greater impact on molecular photoelectric properties. The terminal fluorination significantly enhances the push–pull effect, lowers the energy levels, and slightly increases the vibrational relaxation. As a result, the strongest crystallinity and coplanarity of 8TIC-4F lead to a low vibrational relaxation of 0.18 eV, which makes PTB7-Th:8TIC-4F device exhibit a small E loss of 0.51 eV and a high efficiency of 10.4%. In addition, the fluorinated 6TIC-4F with suitable core size exhibits suitable energy level, absorption, crystallization, and phase separation morphology, making its as-cast device up to 11.61% efficiency. Finally, to the best of the authors’ knowledge, the PCE of 11.61% for PTB7-Th:6TIC-4F based device without any treatment is one of the highest values reported for the NAFs with over 1000 nm absorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron-Molecule Col1isions: Quantitative Approaches, and the Legacy of Aaron Temkin

This article, on electron-molecule collisions, is dedicated to the legacy of my good friend and sometime collaborator, Aaron Temkin on his retirement from the NASA-Goddard Space Flight Center after many years of work at the highest intellectual level in the theoretical treatment of electron-atom and electron-molecule scattering. Aaron's contributions to the manner in which we think about electron-molecule collisions is clear to all of us who have worked in this field. I doubt that the great progress that has occurred in the computational treatment of such complex collision problems could have happened without these contributions. For a brief historical account, see the discussion of Temkin's contribution to electron-molecule scattering in the first article of this volume by Dr. A. K. Bhatia. In this article, I will concentrate on the application of the so called, non-adiabatic R-matrix theory, to vibrational excitation and dissociative attachment, although I will also present some results applying the Linear Algebraic and Kohn-Variational methods to vibrational excitation. As a starting point for almost all computationally effective approaches to electron-molecule collisions, is the fixed nuclei approximation. That is, one recognizes, just as one does with molecular bound states, that there is a separation of electronic(fast) and nuclear(s1ow) degrees of freedom. This separation makes it possible to "freeze" the nuclei in space, calculate the collision parameters for the frozen molecule and then, somehow to add back the vibrations and rotations. The manner in which this is done, depends on the details of the collision problem. It is the work of Aaron and a number of other researchers that has provided the guidance necessary to resolve these issues.

Schneider, B.I.↗

Summary of the modeling and test correlations of a NASTRAN finite element vibrations model for the AH-1G helicopter, task 1

The AH-1G NASTRAN finite element model (FEM) is described and the correlations with measured data that were conducted to verify the model are summarized. Comparisons of the AH-1G NASTRAN FEM calculations with measured data include the following: (1) fuselage and tailboom static load deflection (stiffness) testing, (2) airframe ground vibration testing (0-30 H<), (3) airframe flight vibration testing (main rotor, 2,4, and 6/rev), and (4) tailboom effective skin static testing. A description of the modeling rationale and techniques used to develop the NASTRAN FEM is presented in conjunction with all previous correlation work. In general, the correlations show good agreement between analysis and test in stiffness and vibration response through 15 to 20 Hz. For higher frequencies (equal to or greater than 4/rev (21.6 Hz)), the vibration responses generally did not agree well. Also, the lateral (2/rev (10.8 Hz)) flight vibration responses were much lower in the FEM than test, indicating that there is a significant excitation source other than at the main rotor hub that is affecting the lateral vibrations, such as downwash impingement on the vertical tail.

Cronkhite, J. D.↗

Piezoelectric pushers for active vibration control of rotating machinery

The active control of rotordynamic vibrations and stability by magnetic bearings and electromagnetic shakers have been discussed extensively in the literature. These devices, though effective, are usually large in volume and add significant weight to the stator. The use of piezoelectric pushers may provide similar degrees of effectiveness in light, compact packages. Tests are currently being conducted with piezoelectric pusher-based active vibration control. Results from tests performed on NASA test rigs as preliminary verification of the related theory are presented.

Palazzolo, Alan B.↗