Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Turbulent Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

A comparison of weak-turbulence and particle-in-cell simulations of weak electron-beam plasma interaction

Quasilinear theory has long been used to treat the problem of a weak electron beam interacting with plasma and generating Langmuir waves. Its extension to weak-turbulence theory treats resonant interactions of these Langmuir waves with other plasma wave modes, in particular, ion-sound waves. These are strongly damped in plasma of equal ion and electron temperatures, as sometimes seen in, for example, the solar corona and wind. Weak turbulence theory is derived in the weak damping limit, with a term describing ion-sound wave damping then added. In this paper, we use the EPOCH particle-in-cell code to numerically test weak turbulence theory for a range of electron-ion temperature ratios. We find that in the cold ion limit, the results agree well, but for increasing ion temperature the three-wave resonance becomes broadened in proportion to the ion-sound wave damping rate. Additionally, we establish lower limits on the number of simulation particles needed to accurately reproduce the electron and wave distributions in their saturated states and to reproduce their intermediate states and time evolution. These results should be taken into consideration in, for example, simulations of plasma wave generation in the solar corona of Type III solar radio bursts from the corona to the solar wind and in weak turbulence investigations of ion-acoustic lines in the ionosphere.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of one-dimensional spectral dynamic equations of the Reynolds stresses in homogeneous anisotropic turbulence: Application to split-spectrum modeling

The CTR numerical data base generated by direct simulation of homogeneous anisotropic turbulence was used to calculate all of the terms in the spectral balance equations for the turbulent Reynolds stresses. The aim in not only to test the main closure assumptions used in the split-spectrum models, but also to try to devise improved hypotheses deduced from the statistical information. Numerical simulations of turbulent flows provide a large amount of data, a thought provoking wealth of information. The main advantage of this type of comparison is that a great variety of flows can be considered, and this is necessary to test closure hypotheses. Moreover various initial conditions can be introduced in the calculation, even if they are not experimentally feasible. All the terms in the spectral equations can be calculated. The limited Reynolds numbers of the simulations and the statistical noise caused by a small sample, particularly at the large scales, causes some difficulty in the interpretation of the results, but the method of approach proved to be a powerful tool for testing and improving spectral closures.

Schiestel, R.↗

Numerical Simulation of Pressure-induced Separation of Turbulent Flat-plate Boundary Layers: Definition and Overview of New Cases with Suction-only Transpiration and a Step in Reynolds Number

Results from two new direct numerical simulations (DNSs) are added to the database described in Coleman, Rumsey & Spalart (2018) (henceforth CRS18), and available at the NASA TMR website (https://turbmodels.larc.nasa.gov). The new flows, Cases D and E, are similar to the earlier ones (Cases A–C) in that a transpiration profile above a flat plate creates a prolonged adverse pressure gradient (APG) that drives a canonical turbulent zero-pressure-gradient (ZPG), flat-plate boundary layer towards separation; they differ in that for the new cases (1) the APG is not followed by a favorable gradient (FPG), since only suction transpiration is employed, and (2) the mean shear stress does not cross zero, so that the width of the mean bubble, strictly defined, is essentially zero. However, the probability of reversed skin friction exceeds 49%. The motivation was to produce a flow that is more akin to technological flows, including shock-boundary-layer interaction, with a gradual turbulence-controlled recovery. One of the new simulations is also at a significantly higher Reynolds number than the earlier flows.

Turbulence↗

Characterizing turbulent transport in ASDEX Upgrade L-mode plasmas via nonlinear gyrokinetic simulations

The nature and level of turbulent transport in the outer core of low-confinement (L-mode) discharges performed at the ASDEX Upgrade tokamak [Kallenbach et al., Nucl. Fusion 51, 094012 (2011)] are examined. Previously, it was found that for an L-mode discharge of the DIII-D tokamak [J. L. Luxon and L. G. Davis, Fusion Technol. 8, 441 (1985)] gyrokinetic simulations were unable to reproduce the experimental ion heat flux, underestimating it by almost an order of magnitude. In the present work, employing the GENE gyrokinetic turbulence code, an extensive nonlinear study is performed for L-mode discharges of ASDEX Upgrade in order to cross-check this observation. It is shown that no systematic underprediction can be found in these simulations—instead, discrepancies with respect to experimental transport levels are small enough to be resolved within the uncertainties of the experimental profiles. Moreover, it is shown that some turbulence properties resemble closely those of the underlying linear microinstabilities at least out to 90% of the minor radius, so that quasilinear transport models remain, in principle, applicable even for these parameters, provided that appropriate nonlinear saturation rules can be developed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implementation of a generalized actuator disk wind turbine model into the weather research and forecasting model for large-eddy simulation applications

A generalized actuator disk (GAD) wind turbine parameterization designed for large-eddy simulation (LES) applications was implemented into the Weather Research and Forecasting (WRF) model. WRF-LES with the GAD model enables numerical investigation of the effects of an operating wind turbine on and interactions with a broad range of atmospheric boundary layer phenomena. Numerical simulations using WRF-LES with the GAD model were compared with measurements obtained from the Turbine Wake and Inflow Characterization Study (TWICS-2011), the goal of which was to measure both the inflow to and wake from a 2.3-MW wind turbine. Data from a meteorological tower and two light-detection and ranging (lidar) systems, one vertically profiling and another operated over a variety of scanning modes, were utilized to obtain forcing for the simulations, and to evaluate characteristics of the simulated wakes. Simulations produced wakes with physically consistent rotation and velocity deficits. Two surface heat flux values of 20 W m –2 and 100 W m –2 were used to examine the sensitivity of the simulated wakes to convective instability. Simulations using the smaller heat flux values showed good agreement with wake deficits observed during TWICS-2011, whereas those using the larger value showed enhanced spreading and more-rapid attenuation. This study demonstrates the utility of actuator models implemented within atmospheric LES to address a range of atmospheric science and engineering applications. In conclusion, validated implementation of the GAD in a numerical weather prediction code such as WRF will enable a wide range of studies related to the interaction of wind turbines with the atmosphere and surface.

17 WIND ENERGY↗

Coherent Eigenmodes in Homogeneous MHD Turbulence

The statistical mechanics of Fourier models of ideal, homogeneous, incompressible magnetohydrodynamic (MHD) turbulence is discussed, along with their relevance for dissipative magnetofluids. Although statistical theory predicts that Fourier coefficients of fluid velocity and magnetic field are zero-mean random variables, numerical simulations clearly show that certain coefficients have a non-zero mean value that can be very large compared to the associated standard deviation, i.e., we have coherent structure. We use eigenanalysis of the modal covariance matrices in the probability density function to explain this phenomena in terms of `broken ergodicity', which is defined to occur when dynamical behavior does not match ensemble predictions on very long time-scales. We provide examples from 2-D and 3-D magnetohydrodynamic simulations of homogeneous turbulence, and show new results from long-time simulations of MHD turbulence with and without a mean magnetic field

Shebalin, John V.↗

Advanced simulation of electron heat transport in fusion plasmas

Electron transport in burning plasmas is more important since fusion products first heat electrons. First-principles simulations of electron turbulence are much more challenging due to the multi-scale dynamics of the electron turbulence, and have been made possible by close collaborations between plasma physicists and computational scientists. The GTC simulations of collisionless trapped electron mode (CTEM) turbulence show that the electron heat transport exhibits a gradual transition from Bohm to gyroBohm scaling when the device size is increased. The deviation from the gyroBohm scaling can be induced by large turbulence eddies, turbulence spreading, and non-diffusive transport processes. Analysis of radial correlation function shows that CTEM turbulence eddies are predominantly microscopic but with a significant tail in the mesoscale. A comprehensive analysis of kinetic and fluid time scales shows that zonal flow shearing is the dominant decorrelation mechanism. The mesoscale eddies result from a dynamical process of linear streamers breaking by zonal flows and merging of microscopic eddies. The radial profile of the electron heat conductivity only follows the profile of fluctuation intensity on a global scale, whereas the ion transport tracks more sensitively the local fluctuation intensity. This suggests the existence of a nondiffusive component in the electron heat flux, which arises from the ballistic radial E x B drift of trapped electrons due to a combination of the presence of mesoscale eddies and the weak de-tuning of the toroidal precessional resonance that drives the CTEM instability. On the other hand, the ion radial excursion is not affected by the mesoscale eddies due to a parallel decorrelation, which is not operational for the trapped electrons because of a bounce averaging process associated with the electron fast motion along magnetic field lines. The presence of the nondiffusive component raises question on the applicability of the usual quasilinear theory for the CTEM electron transport. This is in contrast to the good agreement between the quasilinear transport theory and simulation results of the electron heat transport in electron temperature gradient (ETG) turbulence, which is regulated by a wave-particle decorrelation. Therefore, the transport in the CTEM turbulence is a fluid-like eddy mixing process even though the linear CTEM instability is driven by a kinetic resonance. In contrast, a kinetic process dominates the transport in the ETG turbulence, which is characterized by macroscopic streamers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A dissipation-based method for improving the accuracy of computational fluid dynamics simulations of high level non-Newtonian wastes

Here this paper investigates a new viscosity model for laminar, transitional, and turbulent pipe flow simulations of a non-Newtonian slurry using the Star-CCM+ software. Herschel-Bulkley (HB) rheology equation was used in its original and modified forms to model the fluid viscosity. The realizable k-ε model was used for modeling of turbulence. It was observed that simulations using the HB model predicted inaccurate profiles of U (mean velocity) and U + (mean velocity in wall units). Therefore, we developed alternative values of viscosity obtained directly from non-linearity of stress–strain variation (α) in each iteration. The developed method, “Alpha method”, applied changes in places where dissipation rate of turbulent kinetic energy occurred and was designed based on local or global dissipation rate values. Inverse values of α were used to test effects of more viscosity reduction for all flow regimes. In prediction of the mean velocities, significant improvements were obtained through global adjustment of viscosity in inverse form during simulation of the laminar and turbulent flow cases. For the transitional flow, obtaining improvements in prediction of U and U + from the same model version faced challenges. While the global adjustments in direct form were found significantly effective in improving the prediction of U, they failed to predict the U + accurately. For this purpose, Local viscosity adjustments were found significantly effective.

42 ENGINEERING↗

Integrated inertial fusion energy chamber dynamics and response

Here, this paper presents results of three-dimensional hydrodynamics simulations of the flow inside a model inertial fusion energy (IFE) fusion chamber. Turbulence modeling employing the large-eddy simulation approach is used to estimate the gas dynamics, state, and mixing after a sufficiently large number of target ignitions. The rich radiation-flow physics that takes place immediately after the lasers hit the hohlraum is modeled separately using a high-fidelity one-dimensional model, which provides reference conditions for the complex geometry three-dimensional turbulence simulations. The IFE geometry includes optical ports and recirculation openings as well as a duct to evacuate the debris produced after each energy deposition (as a model of a laser shot). Furthermore, a selected set of sensitivity studies are conducted to estimate the effect of uncertainty in radiative properties of the Xenon gas at the prevalent conditions in the chamber. The results provide guidance regarding the turbulence conditions in the chamber, which seem to have entered a decay state immediately before a new shot takes place. Computational estimates of the density variability within the chamber as well as pressure history at the approximate location of the laser optical ports is presented among other turbulence statistics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical Simulation of Event 191-6 of NASA's Flight Tests

In this viewgraph presentation, information is provided on the numerical simulation of a turbulence event encountered by NASA Langley's B-757 while conducting flight tests in areas at high risk for severe turbulence. Specific details on the Terminal Area Simulation System (TASS) show how the simulation is devised. The 100 m simulation was able to observe large-scale features.

Proctor, Fred H.↗

Explaining the convector effect in canopy turbulence by means of large-eddy simulation

Semi-arid forests are found to sustain a massive sensible heat flux in spite of having a low surface to air temperature difference by lowering the aerodynamic resistance to heat transfer ( r H ) – a property called the canopy convector effect (CCE). In this work large-eddy simulations are used to demonstrate that the CCE appears more generally in canopy turbulence. It is indeed a generic feature of canopy turbulence: r H of a canopy is found to reduce with increasing unstable stratification, which effectively increases the aerodynamic roughness for the same physical roughness of the canopy. This relation offers a sufficient condition to construct a general description of the CCE. In addition, we review existing parameterizations for r H from the evapotranspiration literature and test to what extent they are able to capture the CCE, thereby exploring the possibility of an improved parameterization.

54 ENVIRONMENTAL SCIENCES↗

Time-Accurate Simulations and Acoustic Analysis of Slat Free-Shear-Layer

Unsteady computational simulations of a multi-element, high-lift configuration are performed. Emphasis is placed on accurate spatiotemporal resolution of the free shear layer in the slat-cove region. The excessive dissipative effects of the turbulence model, so prevalent in previous simulations, are circumvented by switching off the turbulence-production term in the slat cove region. The justifications and physical arguments for taking such a step are explained in detail. The removal of this excess damping allows the shear layer to amplify large-scale structures, to achieve a proper non-linear saturation state, and to permit vortex merging. The large-scale disturbances are self-excited, and unlike our prior fully turbulent simulations, no external forcing of the shear layer is required. To obtain the farfield acoustics, the Ffowcs Williams and Hawkings equation is evaluated numerically using the simulated time-accurate flow data. The present comparison between the computed and measured farfield acoustic spectra shows much better agreement for the amplitude and frequency content than past calculations. The effect of the angle-of-attack on the slat's flow features radiated acoustic field are also simulated presented.

Khorrami, Mehdi R.↗

A SHELL MODEL TURBULENT DYNAMO

Turbulent dynamo phenomena, observed almost everywhere in astrophysical objects and also in the laboratory in the recent VKS2 experiment, are investigated using a shell model technique to describe magnetohydrodynamic turbulence. Detailed numerical simulations at very high Rossby numbers ({alpha}{sup 2} dynamo) show that as the magnetic Reynolds number increases, the dynamo action starts working and different regimes are observed. The model, which displays different large-scale coherent behaviors corresponding to different regimes, is able to reproduce the magnetic field reversals observed both in a geomagnetic dynamo and in the VKS2 experiment. While rough quantitative estimates of typical times associated with the reversal phenomenon are consistent with paleomagnetic data, the analysis of the transition from oscillating intermittent through reversal and finally to stationary behavior shows that the nature of the reversals we observe is typical of {alpha}{sup 2} dynamos and completely different from VKS2 reversals. Finally, the model shows that coherent behaviors can also be naturally generated inside the many-mode dynamical chaotic model, which reproduces the complexity of fluid turbulence, as described by the shell technique.

79 ASTRONOMY AND ASTROPHYSICS↗

TURBULENT LINEWIDTHS IN PROTOPLANETARY DISKS: PREDICTIONS FROM NUMERICAL SIMULATIONS

Submillimeter observations of protoplanetary disks now approach the acuity needed to measure the turbulent broadening of molecular lines. These measurements constrain disk angular momentum transport, and furnish evidence of the turbulent environment within which planetesimal formation takes place. We use local magnetohydrodynamic (MHD) simulations of the magnetorotational instability (MRI) to predict the distribution of turbulent velocities in low-mass protoplanetary disks, as a function of radius and height above the mid-plane. We model both ideal MHD disks and disks in which Ohmic dissipation results in a dead zone of suppressed turbulence near the mid-plane. Under ideal conditions, the disk mid-plane is characterized by a velocity distribution that peaks near v {approx_equal} 0.1c{sub s} (where c{sub s} is the local sound speed), while supersonic velocities are reached at z > 3H (where H is the vertical pressure scale height). Residual velocities of v Almost-Equal-To 10{sup -2} c{sub s} persist near the mid-plane in dead zones, while the surface layers remain active. Anisotropic variation of the linewidth with disk inclination is modest. We compare our MHD results to hydrodynamic simulations in which large-scale forcing is used to initiate similar turbulent velocities. We show that the qualitative trend of increasing v with height, seen in the MHD case, persists for forced turbulence and is likely a generic property of disk turbulence. Percentage level determinations of v at different heights within the disk, or spatially resolved observations that probe the inner disk containing the dead zone region, are therefore needed to test whether the MRI is responsible for protoplanetary disk turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluating Terrain as a Turbulence Generation Method

When driving microscale large-eddy simulations with mesoscale model solutions, turbulence will take space to develop, known as fetch, on the microscale domain. To reduce fetch, it is common to add perturbations near the boundaries to speed up turbulence development. However, when simulating domains over complex terrain, it is possible that the terrain itself can quickly generate turbulence within the boundary layer. It is shown here that rugged terrain is able to generate turbulence without the assistance of a perturbation strategy; however, the levels of turbulence generated are improved when adding perturbations at the inlet. Flow over smoothed, but not flat, terrain fails to generate adequate turbulence throughout the boundary layer in all tests conducted herein. Sensitivities to the strength of the mean wind speed and boundary layer height are investigated and show that higher wind speeds produce turbulence over terrain features that slower wind speeds do not. Further, by increasing the height of the capping inversion, the effectiveness of topography alone to generate turbulence throughout the depth of the boundary is diminished. In all cases, the inclusion of a perturbation strategy improved simulation performance with respect to turbulence development.

17 WIND ENERGY↗

Simulations of drift resistive ballooning L-mode turbulence in the edge plasma of the DIII-D tokamak

Results from simulations of electromagnetic drift-resistive ballooning turbulence for tokamak edge turbulence in realistic single-null geometry are reported. The calculations are undertaken with the BOUT three-dimensional fluid code that solves Braginskii-based fluid equations [X. Q. Xu and R. H. Cohen, Contrib. Plasma Phys. 36, 158 (1998)]. The simulation setup models L-mode edge plasma parameters in the actual magnetic geometry of the DIII-D tokamak [J. L. Luxon et al., Fusion Sci. Technol. 48, 807 (2002)]. The computations track the development of drift-resistive ballooning turbulence in the edge region to saturation. Fluctuation amplitudes, fluctuation spectra, and particle and thermal fluxes are compared to experimental data near the outer midplane from Langmuir probe and beam-emission-spectroscopy for a few well-characterized L-mode discharges in DIII-D. The simulations are comprised of a suite of runs in which the physics model is varied to include more fluid fields and physics terms. The simulations yield results for fluctuation amplitudes, correlation lengths, particle and energy fluxes, and diffusivities that agree with measurements within an order of magnitude and within factors of 2 or better for some of the data. The agreement of the simulations with the experimental measurements varies with respect to including more physics in the model equations within the suite of models investigated. The simulations show stabilizing effects of sheared E × B poloidal rotation (imposed zonal flow) and of lower edge electron temperature and density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonuniversal star formation efficiency in turbulent ISM

We present a study of a star formation prescription in which star formation efficiency (SFE) depends on local gas density and turbulent velocity dispersion, as suggested by direct simulations of SF in turbulent giant molecular clouds (GMCs). We test the model using a simulation of an isolated Milky-Way-sized galaxy with a self-consistent treatment of turbulence on unresolved scales. We show that this prescription predicts a wide variation of local SFE per free-fall time, ϵ{sub ff} ∼ 0.1%–10%, and gas depletion time, t{sub dep} ∼ 0.1–10 Gyr. In addition, it predicts an effective density threshold for star formation due to suppression of ϵ{sub ff} in warm diffuse gas stabilized by thermal pressure. We show that the model predicts star formation rates (SFRs) in agreement with observations from the scales of individual star-forming regions to the kiloparsec scales. This agreement is nontrivial, as the model was not tuned in any way and the predicted SFRs on all scales are determined by the distribution of the GMC-scale densities and turbulent velocities σ in the cold gas within the galaxy, which is shaped by galactic dynamics. The broad agreement of the star formation prescription calibrated in the GMC-scale simulations with observations both gives credence to such simulations and promises to put star formation modeling in galaxy formation simulations on a much firmer theoretical footing.

79 ASTRONOMY AND ASTROPHYSICS↗

The relation between reconnected flux, the parallel electric field, and the reconnection rate in a three-dimensional kinetic simulation of magnetic reconnection

We investigate the distribution of parallel electric fields and their relationship to the location and rate of magnetic reconnection in a large particle-in-cell simulation of 3D turbulent magnetic reconnection with open boundary conditions. The simulation's guide field geometry inhibits the formation of simple topological features such as null points. Therefore, we derive the location of potential changes in magnetic connectivity by finding the field lines that experience a large relative change between their endpoints, i.e., the quasi-separatrix layer. We find a good correspondence between the locus of changes in magnetic connectivity or the quasi-separatrix layer and the map of large gradients in the integrated parallel electric field (or quasi-potential). Furthermore, we investigate the distribution of the parallel electric field along the reconnecting field lines. We find the reconnection rate is controlled by only the low-amplitude, zeroth and first–order trends in the parallel electric field while the contribution from fluctuations of the parallel electric field, such as electron holes, is negligible. The results impact the determination of reconnection sites and reconnection rates in models and in situ spacecraft observations of 3D turbulent reconnection. It is difficult through direct observation to isolate the loci of the reconnection parallel electric field amidst the large amplitude fluctuations. However, we demonstrate that a positive slope of the running sum of the parallel electric field along the field line as a function of field line length indicates where reconnection is occurring along the field line.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗