Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRONG INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

In situ x-ray absorption investigations of a heterogenized molecular catalyst and its interaction with a carbon nanotube support

A highly active heterogenized molecular CO 2 reduction catalyst on a conductive carbon support is investigated to identify if its improved catalytic activity can be attributed to strong electronic interactions between catalyst and support. The molecular structure and electronic character of a [Re +1 (tBu-bpy)(CO) 3 Cl] (tBu-bpy = 4,4'-tert-butyl-2,2'-bipyridine) catalyst deposited on multiwalled carbon nanotubes are characterized using Re L 3 -edge x-ray absorption spectroscopy under electrochemical conditions and compared to the homogeneous catalyst. The Re oxidation state is characterized from the near-edge absorption region, while structural changes of the catalyst are assessed from the extended x-ray absorption fine structure under reducing conditions. Chloride ligand dissociation and a Re-centered reduction are both observed under applied reducing potential. The results confirm weak coupling of [Re(tBu-bpy)(CO) 3 Cl] with the support, since the supported catalyst exhibits the same oxidation changes as the homogeneous case. However, these results do not preclude strong interactions between a reduced catalyst intermediate and the support, preliminarily investigated here using quantum mechanical calculations. Thus, our results suggest that complicated linkage schemes and strong electronic interactions with the initial catalyst species are not required to improve the activity of heterogenized molecular catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Revealing the short-range structure of the mirror nuclei 3 H and 3 He

When protons and neutrons (nucleons) are bound into atomic nuclei, they are close enough to feel significant attraction, or repulsion, from the strong, short-distance part of the nucleon-nucleon interaction. These strong interactions lead to hard collisions between nucleons, generating pairs of highly energetic nucleons referred to as short-range correlations (SRCs). SRCs are an important but relatively poorly understood part of nuclear structure, and mapping out the strength and the isospin structure (neutron-proton (np) versus proton-proton (pp) pairs) of these virtual excitations is thus critical input for modelling a range of nuclear, particle and astrophysics measurements. Two-nucleon knockout or 'triple coincidence' reactions have been used to measure the relative contribution of np-SRCs and pp-SRCs by knocking out a proton from the SRC and detecting its partner nucleon (proton or neutron). These measurements have shown that SRCs are almost exclusively np pairs, but they had limited statistics and required large model-dependent final-state interaction corrections. Here we report on measurements using inclusive scattering from the mirror nuclei hydrogen-3 and helium-3 to extract the np/pp ratio of SRCs in systems with a mass number of three. In this work we obtain a measure of the np/pp SRC ratio that is an order of magnitude more precise than previous experiments, and find a marked deviation from the near-total np dominance observed in heavy nuclei. This result implies an unexpected structure in the high-momentum wavefunction for hydrogen-3 and helium-3. Understanding these results will improve our understanding of the short-range part of the nucleon-nucleon interaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Interaction-induced velocity renormalization in magic-angle twisted multilayer graphene

Abstract Twistronics heterostructures provide a novel route to control the electronic single particle velocity and thereby to engineer strong effective interactions. Here we show that the reverse may also hold, i.e. that these interactions strongly renormalize the band structure. We demonstrate this mechanism for alternating-twist magic-angle three- and four-layer graphene at charge neutrality and in the vicinity of a phase transition which can be described by an Ising Gross-Neveu critical point corresponding, e.g. to the onset of valley Hall or Hall order. While the non-interacting model displays massless Dirac excitations with strongly different velocities, we show that interaction corrections make them equal in the infrared. However, the renormalization group flow of the velocities and of the coupling to the critical bosonic mode is strongly non-monotonic and dominated by the vicinity of a repulsive fixed point. We predict experimental consequences of this theory for tunneling and transport experiments and discuss the expected behavior at other quantum critical points, including those corresponding to intervalley coherent ordering.

Classen, Laura↗
DOE OSTI2019

Ultrafast Intercalation Enabled by Strong Solvent–Host Interactions: Understanding Solvent Effect at the Atomic Level

Abstract Solvents play an essential role in many areas of chemistry and is the cornerstone of understanding reactivity in solution‐phase reactions. Solvent effects have been widely observed in intercalation reactions; however, understanding of the influence of solvents on the thermodynamics and kinetics remains largely elusive in intercalation chemistry. Now, the solvent‐dependent kinetics of ferrocene intercalation into a layered vanadyl phosphate (VOPO 4 ⋅2 H 2 O) host is presented, with a special focus on primary alcohols. From methanol to 1‐hexnaol, the intercalation rate peaks in 1‐propanol (80 times faster than the slowest case in methanol). Similar kinetics of exfoliation are also found in these solvents without ferrocene. The correlation between intercalation and exfoliation is understood at atomic level by DFT calculations, which reveal the role of pre‐intercalated solvent molecules play in intralayer interactions, interlayer expansion, and layer sliding.

Zhu, Yue↗
DOE OSTI2019

Ultrafast Intercalation Enabled by Strong Solvent–Host Interactions: Understanding Solvent Effect at the Atomic Level

Solvents play an essential role in many areas of chemistry and is the cornerstone of understanding reactivity in solution-phase reactions. Solvent effects have been widely observed in intercalation reactions; however, understanding of the influence of solvents on the thermodynamics and kinetics remains largely elusive in intercalation chemistry. Now, the solvent-dependent kinetics of ferrocene intercalation into a layered vanadyl phosphate (VOPO 4 ∙2 H 2 O) host is presented, with a special focus on primary alcohols. From methanol to 1-hexnaol, the intercalation rate peaks in 1-propanol (80 times faster than the slowest case in methanol). Similar kinetics of exfoliation are also found in these solvents without ferrocene. Here, the correlation between intercalation and exfoliation is understood at atomic level by DFT calculations, which reveal the role of pre-intercalated solvent molecules play in intralayer interactions, interlayer expansion, and layer sliding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Strong Phonon–Phonon Interactions Securing Extraordinary Thermoelectric Ge 1– x Sb x Te with Zn-Alloying-Induced Band Alignment

The ability of substitution atoms to decrease thermal conductivity is usually ascribed to the enhanced phonon-impurity scattering by assuming the original phonon dispersion relations. In this study, we find that 10% SbGe alloying in GeTe modifies the phonon dispersions significantly, closes the acoustic–optical phonon band gap, increases the phonon–phonon scattering rates, and reduces the phonon group velocities. These changes, together with grain boundaries, nanoprecipitates, and planar vacancies, lead to a significant decrease in the lattice thermal conductivity. In addition, an extra 2–6% Zn alloying decreases the energy offset between valence band edges at L and Σ points in Ge 1–x Sb x Te that is found to be induced by the Ge 4s 2 lone pairs. Since Zn is free of s 2 lone pair electrons, substituting Ge with Zn atoms can consequently diminish the Ge 4s 2 lone-pair characters and reduce the energy offset, resulting in two energetically merged valence band maxima. Further, the refined band structures render a power factor up to 40 μW cm –1 K –2 in Ge 0.86 Sb 0.1 Zn 0.04 Te. Ultimately, a superhigh zT of 2.2 is achieved. This study clarifies the impacts of high-concentration substitutional atoms on phonon band structure, phonon–phonon scattering rates, and the convergence of electron valence band edges, which could provide guidelines for developing high-performance thermoelectric materials.

Alloying↗
DOE OSTI2022

Electronic and optical properties of crystalline nitrogen versus black phosphorus: A comparative first-principles study

We report crystalline black nitrogen (BN) is an allotrope of nitrogen with the black phosphorus (BP) structure recently synthesized at high pressure by two independent research groups. Here, we present a systematic study of the electronic and optical properties of BN focusing on its comparison with BP. To this end, we use the state-of-the-art quasiparticle self-consistent GW approach with vertex corrections in both the electronic and optical channels. Despite many similarities, the properties of BN are found to be considerably different. Unlike BP, BN exhibits a larger optical gap (2.5 vs 0.26 eV), making BN transparent in the visible spectral region with a highly anisotropic optical response. This difference can be primarily attributed to a considerably reduced dielectric screening in BN, leading to enhancement of the effective Coulomb interaction. Despite relatively strong Coulomb interaction, exciton formation is largely suppressed in both materials. Our analysis of the elastic properties shows exceptionally high stiffness of BN, comparable to that of diamond.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1972

The interaction of moderately strong shock waves with thick perforated walls of low porosity

A theoretical prediction is given of the flow through thick perforated walls of low porosity resulting from the impingement of a moderately strong traveling shock wave. The model was a flat plate positioned normal to the direction of the flow. Holes bored in the plate parallel to the direction of the flow provided nominal hole length-to-diameter ratios of 10:1 and an axial porosity of 25 percent of the flow channel cross section. The flow field behind the reflected shock wave was assumed to behave as a reservoir producing a quasi-steady duct flow through the model. Rayleigh and Fanno duct flow theoretical computations for each of three possible auxiliary wave patterns that can be associated with the transmitted shock (to satisfy contact surface compatibility) were used to provide bounding solutions as an alternative to the more complex influence coefficients method. Qualitative and quantitative behavior was verified in a 1.5- by 2.0-in. helium shock tube. High speed Schlieren photography, piezoelectric pressure-time histories, and electronic-counter wave speed measurements were used to assess the extent of correlation with the theoretical flow models. Reduced data indicated the adequacy of the bounding theory approach to predict wave phenomena and quantitative response.

Grant, D. J.↗
NASA NTRS1985

Numerical solution of strong radiation gasdynamic interactions in a hydrogen-seedant mixture

Theoretical and experimental results are provided for the absorption of laser energy by a gas flow. A two-dimensional numerical model described the temperature field, fluid dynamics, variable absorptivity and gas dynamics. The model was tested using a hydrogen-seedant mixture injected with 10.6 micron laser radiation. The laser mix was selected to allow reduced temperature gradients and energy source terms. It was found possible, by varying parameters such as the laser power and flash pressure, to precisely position the peak absorptance region in higher speed flows. More refined models are being tested to achieve accurate absorptance predictions in flows below Mach 0.0001.

Merkle, C. L.↗