Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SIMULATION METHODS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Determination of Interfacial Energy for Solid-State Precipitation

Precipitation of strengthening phases from solid state is a critical process for many materials. For example, the high-temperature creep resistance of Ni-based superalloys is governed by ’ precipitates. However, the interfacial energy which controls the precipitation is expensive to determine experimentally. For simulations, the atomic nature of precipitation events necessitates using Molecular Dynamics (MD) so relying on fitting to a-priori experimental behavior is not required. However, the solid-state precipitation takes orders of magnitude longer time than is accessible for traditional MD simulation. Taking inspiration from Kinetic Monte-Carlo (KMC) methods for simulating diffusion on a rigid lattice, we have developed a hybrid KMC-MD approach to enable simulation of solid-state precipitation (and determination of the interfacial energy). Implementing these methods in LAMMPS, we calculated the interfacial energy for the ’ precipitation out of a super-saturated  phase in Ni-based superalloys. The resulting interfacial energy value for the Ni-Al system is well within the accuracy of experimental values, demonstrating the capability of this method. Enabling the calculation of the interfacial energy without a-priori experimental knowledge of the precipitation unlocks a more efficient ICME-based approach for guiding annealing protocols in Ni-based superalloys and other solid-state precipitation systems.

Precipitation↗

Sci-Fri PM: Radiation Therapy, Planning, Imaging, and Special Techniques - 05: A novel respiratory motion simulation program for VMAT treatment plans: a phantom validation study

Purpose: To develop and validate a computational method to simulate craniocaudal respiratory motion in a VMAT treatment plan. Methods: Three 4DCTs of the QUASAR respiratory motion phantom were acquired with a 2cm water-density spherical tumour embedded in cedar to simulate lung. The phantom was oscillating sinusoidally with an amplitude of 2cm and periods of 3, 4, and 5 seconds. An ITV was contoured and 5mm PTV margin was added. High and a low modulation factor VMAT plans were created for each scan. An in-house program was developed to simulate respiratory motion in the treatment plans by shifting the MLC leaf positions relative to the phantom. Each plan was delivered to the phantom and the dose was measured using Gafchromic film. The measured and calculated plans were compared using an absolute dose gamma analysis (3%/3mm). Results: The average gamma pass rate for the low modulation plan and high modulation plans were 91.1% and 51.4% respectively. The difference between the high and low modulation plans gamma pass rates is likely related to the different sampling frequency of the respiratory curve and the higher MLC leaf speeds in the high modulation plan. A high modulation plan has a slower gantry speed and therefore samples the breathing cycle at a coarser frequency leading to inaccuracies between the measured and planned doses. Conclusion: A simple program, including a novel method for increasing sampling frequency beyond the control point frequency, has been developed to simulate respiratory motion in VMAT plans by shifting the MLC leaf positions.

60 APPLIED LIFE SCIENCES↗

Modeling the Nucleation of Weak Electrolytes via Hybrid GCMC/MD Simulation

We have developed a hybrid grand canonical Monte Carlo/molecular dynamics (GCMC/MD) method for simulating the nucleation of weak electrolytes in an explicit solvent. In contrast to brute-force MD simulation, the approach is capable of efficiently simulating the nucleation of dilute solutions while including the atomistic influence of the surrounding solvent and provides access to the full nucleation free energy surface and associated nucleation free energy barrier. After validating the method against a simple model system, we applied the approach to the nucleation of a low-solubility rock-salt structure in liquid water. We find that the calculated nucleation barriers, in conjunction with analytic rate theories, yield predicted nucleation rates that are in excellent agreement with brute-force MD simulations of the supersaturated solution. We anticipate possible applications of this approach to a wide variety of related weak electrolytes, including CaCO 3 , zeolites, and metal–organic frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monte Carlo turbulence simulation

The paper describes turbulence simulation experiments based on the principles of control system theory, that is, the construction of a system characterized by a system function such that upon exciting the system with prescribed noise processes the output of the system is a realization of a random processing the desired statistical attributes of turbulence. An experimental autocorrelation of Jimsphere measurements of wind velocity was approximated to simulate turbulent wind. From the approximate autocorrelation function, the required system function is obtained, and a discrete time system is designed. Another method of simulation is to solve the convolution integral by filter techniques. Other methods include discrete Fourier simulation and self-similar simulation.

Fichtl, G. H.↗

Neutron transport methods for multiphysics heterogeneous reactor core simulation in Griffin

Griffin is a reactor physics application based on the Multiphysics Object-Oriented Simulation Environment (MOOSE). This work discloses the methods, algorithms, and implementation for simulating heterogeneous reactor dynamics models. Griffin utilizes a discontinuous finite-element method with discrete ordinates (DFEM-S ) to discretize the field variable of the multigroup neutron transport equation. Multiphysics feedback is handled using two-step tabulated cross-section methodology. Feedback quantities are evaluated using the MOOSE-MultiApp system to couple various engineering phenomena, such as heat conduction and thermal fluids. The multiphysics DFEM-S system is solved using fixed-point iteration with a fully asynchronous parallel sweeper, unstructured coarse-mesh finite difference acceleration, and a multi-timescale improved quasi-static method scheme. The implementation is applied to a multiphysics microreactor model, with two transients: one initiated by a single heat-pipe failure and another by control drum rotation. Importantly, these examples demonstrate the ability of Griffin to tractably solve the neutron transport equation considering seven independent variables and feedback.

97 MATHEMATICS AND COMPUTING↗

CFD-DEM Modeling of Autothermal Pyrolysis of Corn Stover with a Coupled Particle- and Reactor-Scale Framework

Autothermal operation of fast pyrolysis is an efficient process-intensification technique wherein exothermic oxidation reactions are used to overcome the heat-transfer bottleneck of conventional pyrolysis. The development of accurate, reliable modeling toolsets is imperative to generating a deeper understanding of biomass autothermal pyrolysis systems to support scale-up and industrial deployment. This modeling effort describes the development of single-particle and reactor models which incorporate detailed reaction schemes and simultaneous exothermic oxidation reactions. The particle-scale model was parameterized for corn stover feedstock with particle morphology, density, ash content, and biopolymer composition, all of which impact the emergent conversion characteristics during pyrolysis. Results were then used to parameterize a reactor-scale autothermal pyrolysis model, which was developed using a coarse-grained computational fluid dynamic-discrete element method. The simulation results compared well with experimental results, with the predicted bio-oil, light gas, and biochar yield within 3.0 wt% of the experimental yields. Further analyses were performed to test the influence of equivalence ratio, biomass injection position, and particle size distribution on autothermal pyrolysis. The analysis of the physio-chemical properties of the fluid and solid phase inside the reactor and at the reactor outlet help reveal important process interactions of autothermal pyrolysis.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

Speeding up N -body simulations of modified gravity: chameleon screening models

We describe and demonstrate the potential of a new and very efficient method for simulating certain classes of modified gravity theories, such as the widely studied f ( R ) gravity models. High resolution simulations for such models are currently very slow due to the highly nonlinear partial differential equation that needs to be solved exactly to predict the modified gravitational force. This nonlinearity is partly inherent, but is also exacerbated by the specific numerical algorithm used, which employs a variable redefinition to prevent numerical instabilities. The standard Newton-Gauss-Seidel iterative method used to tackle this problem has a poor convergence rate. Our new method not only avoids this, but also allows the discretised equation to be written in a form that is analytically solvable. We show that this new method greatly improves the performance and efficiency of f ( R ) simulations. For example, a test simulation with 512{sup 3} particles in a box of size 512 Mpc/ h is now 5 times faster than before, while a Millennium-resolution simulation for f ( R ) gravity is estimated to be more than 20 times faster than with the old method. Our new implementation will be particularly useful for running very high resolution, large-sized simulations which, to date, are only possible for the standard model, and also makes it feasible to run large numbers of lower resolution simulations for covariance analyses. We hope that the method will bring us to a new era for precision cosmological tests of gravity.

79 ASTRONOMY AND ASTROPHYSICS↗

Material point method modeling in oil and gas reservoirs

A computer system and method of simulating the behavior of an oil and gas reservoir including changes in the margins of frangible solids. A system of equations including state equations such as momentum, and conservation laws such as mass conservation and volume fraction continuity, are defined and discretized for at least two phases in a modeled volume, one of which corresponds to frangible material. A material point model technique for numerically solving the system of discretized equations, to derive fluid flow at each of a plurality of mesh nodes in the modeled volume, and the velocity of at each of a plurality of particles representing the frangible material in the modeled volume. A time-splitting technique improves the computational efficiency of the simulation while maintaining accuracy on the deformation scale. The method can be applied to derive accurate upscaled model equations for larger volume scale simulations.

02 PETROLEUM↗

Requirements and Techniques for Developing and Measuring Simulant Materials

The 1989 workshop report entitled Workshop on Production and Uses of Simulated Lunar Materials and the Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage, NASA Technical Publication identify and reinforced a need for a set of standards and requirements for the production and usage of the lunar simulant materials. As NASA need prepares to return to the moon, a set of requirements have been developed for simulant materials and methods to produce and measure those simulants have been defined. Addressed in the requirements document are: 1) a method for evaluating the quality of any simulant of a regolith, 2) the minimum Characteristics for simulants of lunar regolith, and 3) a method to produce lunar regolith simulants needed for NASA's exploration mission. A method to evaluate new and current simulants has also been rigorously defined through the mathematics of Figures of Merit (FoM), a concept new to simulant development. A single FoM is conceptually an algorithm defining a single characteristic of a simulant and provides a clear comparison of that characteristic for both the simulant and a reference material. Included as an intrinsic part of the algorithm is a minimum acceptable performance for the characteristic of interest. The algorithms for the FoM for Standard Lunar Regolith Simulants are also explicitly keyed to a recommended method to make lunar simulants.

Rickman, Doug↗

Feasibility and Performance Analysis of Magnetohydrodynamics Control for Aerocapture at Neptune

NASA’s most recent Decadal Survey posed a mission to one of the Ice Giants as the top priorityfor flagship missionsin the organization’s future. However, current technologieslimit the amount of scientific payload available for future Uranian and Neptunian missions due to the need for fuel for orbit insertion maneuvers. Thus, to maximize the scientific potential of futuremissions, atmospheric aerocapture has been heavily researched. While atmospheric aerocapture simulations have proven enabling for capturing around Neptune, its deep atmospheric pass requiresan aeroshell with thermal protection systems(TPS).Magnetohydrodynamically-controlled aerocapture serves as a potential solution to both fully-propulsive orbit insertion and atmospheric aerocapture. Through NASA Langley’s high-fidelity flight dynamics simulation, the Program to Optimize Simulated Trajectories II, both the atmospheric and magnetohydrodynamic aerocapture methods were simulated and compared for identical missions to Neptune. After applying a guidance algorithm for both methods, the results showed that magnetohydrodynamics has not only the control authority to successfully capture around Neptune, but also the unique advantage of a shallower atmospheric pass which decreases the maximum heat load and the required TPS mass.

Danny N Nguyen↗

Feasibility and Performance Analysis of Magnetohydrodynamics Control for Aerocapture at Neptune

NASA’s most recent Decadal Survey posed a mission to one of the Ice Giants as the top priority for flagship missions in the organization’s future. However, current technologies limit the amount of scientific payload available for future Uranian and Neptunian missions due to the need for fuel for orbit insertion maneuvers. Thus, to maximize the scientific potential of future missions, atmospheric aerocapture has been heavily researched. While atmospheric aerocapture simulations have proven enabling for capturing around Neptune, its deep atmospheric pass requires an aeroshell with thermal protection systems(TPS). Magnetohydrodynamically-controlled aerocapture serves as a potential solution to both fully-propulsive orbit insertion and atmospheric aerocapture. Through NASA Langley’s high-fidelity flight dynamics simulation, the Program to Optimize Simulated Trajectories II, both the atmospheric and magnetohydrodynamic aerocapture methods were simulated and compared for identical missions to Neptune. After applying a guidance algorithm for both methods, the results showed that magnetohydrodynamics has not only the control authority to successfully capture around Neptune, but also the unique advantage of a shallower atmospheric pass which decreases the maximum heat load and the required TPS mass.

Danny Nguyen↗

Hierarchical Simulation to Assess Hardware and Software Dependability

This thesis presents a method for conducting hierarchical simulations to assess system hardware and software dependability. The method is intended to model embedded microprocessor systems. A key contribution of the thesis is the idea of using fault dictionaries to propagate fault effects upward from the level of abstraction where a fault model is assumed to the system level where the ultimate impact of the fault is observed. A second important contribution is the analysis of the software behavior under faults as well as the hardware behavior. The simulation method is demonstrated and validated in four case studies analyzing Myrinet, a commercial, high-speed networking system. One key result from the case studies shows that the simulation method predicts the same fault impact 87.5% of the time as is obtained by similar fault injections into a real Myrinet system. Reasons for the remaining discrepancy are examined in the thesis. A second key result shows the reduction in the number of simulations needed due to the fault dictionary method. In one case study, 500 faults were injected at the chip level, but only 255 propagated to the system level. Of these 255 faults, 110 shared identical fault dictionary entries at the system level and so did not need to be resimulated. The necessary number of system-level simulations was therefore reduced from 500 to 145. Finally, the case studies show how the simulation method can be used to improve the dependability of the target system. The simulation analysis was used to add recovery to the target software for the most common fault propagation mechanisms that would cause the software to hang. After the modification, the number of hangs was reduced by 60% for fault injections into the real system.

Ries, Gregory Lawrence↗

Method to estimate uncertainty associated with parcel size in coarse discrete particle simulation

Coarse grained particle methods significantly reduce the computation cost of large‐scale fluidized bed simulation by lumping many real particles into a computation parcel. This research provides a method to estimate the errors associated with parcel size in large‐scale fluidized bed simulations. This uncertainty is first quantified in small scale domains by comparing results of discrete particle method with that employing coarse parcels of different sizes. Then, this uncertainty is correlated with parcel size and simulation domains consisting of a simple homogeneous cooling system and more complex bubbling and circulating fluidized beds. These correlations allow us to accurately estimate the uncertainty in large‐scale fluidized beds based solely on data obtained in smaller systems. The ability to estimate model‐related uncertainty in larger systems makes this method relevant for industrial applications. © 2018 American Institute of Chemical Engineers AIChE J , 64: 2340–2350, 2018

Lu, Liqiang↗

Simulating Snow Over Sea Ice In Climate Models

We have evaluated two methods of simulating the seasonal cycle of snow over sea ice in and around the Arctic: The NCAR global climate model CCM3, with its standard snow hydrology, and the snow pack model SNTHERM, forced with hourly atmospheric output from CCM3. A new dataset providing dates for the onset of snow melt over Arctic sea ice provides a means for assessing basin-wide how well the models simulate melt onset, but contains no information on how long it then takes for all the snow to melt. Use of data from the SHEBA site provides very detailed information on the behavior of the snow before and during the melt season, but only for a very limited area. Russian drift data provide climatological data on the seasonal cycle of snow water equivalent and snow density, over multi-year sea ice in the central Arctic basin. These datasets are used to compare the two modeling methods, and to see if use of the more physically-realistic SNTHERM provides any significant improvements. Conclusions obtained so far include: 1. Both CCM3 and CCM3/SNTHERM do a good job overall of matching the onset of snow melt dataset; although CCM3/SNTHERM consistently trends to underestimate the date and CCM3 to overestimate it. 2. SHEBA and ice drift data for the Arctic show that CCM3/ SNTHERM does a better job than CCM3 at simulating the total melt period. 3. Ice drift snow density and accumulation data suggest that while providing superior results, CCM3/SNTHERM may still suffer from overly vigorous melting. 4. Both the large-scale atmospheric forcing and snow pack physical processes are important in proper simulation of the snow seasonal cycle. Ongoing work includes further diagnosis of CCM3/SNTHERM, use of more observational datasets, especially from marginal seas in the pan-Arctic, and full coupling of SNTHERM into CCM3 (work to date has all been off-line simulations).

Arnold, James E.↗

What can simulation test beds teach us about social science? Results of the ground truth program

The ground truth program used simulations as test beds for social science research methods. The simulations had known ground truth and were capable of producing large amounts of data. This allowed research teams to run experiments and ask questions of these simulations similar to social scientists studying real-world systems, and enabled robust evaluation of their causal inference, prediction, and prescription capabilities. We tested three hypotheses about research effectiveness using data from the ground truth program, specifically looking at the influence of complexity, causal understanding, and data collection on performance. We found some evidence that system complexity and causal understanding influenced research performance, but no evidence that data availability contributed. The ground truth program may be the first robust coupling of simulation test beds with an experimental framework capable of teasing out factors that determine the success of social science research.

97 MATHEMATICS AND COMPUTING↗

Numerical Simulation and Experimental Validation of Nondendritic Structure Formation in Magnesium Alloy Under Oscillation and Ultrasonic Vibration

In this study, the formation of nondendritic structures in the primary phase of magnesium alloy solidified under oscillation and ultrasonic vibration was investigated by numerical simulation and experimentally. The growth and motion of a dendrite during solidification was simulated by a combination of the lattice Boltzmann method and the phase-field method. The simulation and experimental results indicated that higher oscillation amplitudes and acoustic streaming made the microstructures change from dendritic to nondendritic in the α-Mg primary phases. A sufficient shear stress and an appropriate flow time in the barrel should be satisfied when a given inclined angle is selected. The effects of the flow and the thermal field on the nucleation behavior, the constitutional undercooling, and the growth morphology are also discussed. It was found that a high shear rate and high turbulence can help homogenize the temperature and the concentration fields and collide and rotate the α-Mg primary phases.

36 MATERIALS SCIENCE↗