Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Crystal Structure and Phase Relations of the R{sub 2}Fe{sub 14}B–Y{sub 2}Fe{sub 14}B (R = Nd and Pr) Systems

The phase relations in the R{sub 2}Fe{sub 14}B–Y{sub 2}Fe{sub 14}B (R = Nd and Pr) systems have been investigated by means of X-ray powder diffraction (XRD), differential thermal analysis (DTA), and scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS). Crystal structure parameters for all studied alloys (R{sub 1−x}Y{sub x}){sub 2}Fe{sub 14}B (R = Nd and Pr) have been determined by Rietveld refinements. Their structures are similar to that of the Nd{sub 2}Fe{sub 14}B phase with tetragonal structure (space group P4{sub 2}/mnm). The continuous solid solutions are formed in these systems. The lattice parameters and unit cell volumes of the (R{sub 1−x}Y{sub x}){sub 2}Fe{sub 14}B (R = Nd and Pr) solid solutions decrease gradually with increasing Y content. The DTA results present that the decomposition temperature of (R{sub 1−x}Y{sub x}){sub 2}Fe{sub 14}B (R = Nd and Pr) rises with x ranging from 0 to 1.0. The vertical sections of the R{sub 2}Fe{sub 14}B–Y{sub 2}Fe{sub 14}B (R = Nd and Pr) systems are presented in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Properties of Thermal- and Deformation-Induced Martensite in an Fe-27%Ni-4%Mn-1%Zn Alloy

Deformation- and thermal-induced martensite properties were examined according to existing martensite morphology and magnetic properties for same prior austenite homogenization conditions in Fe-27%Ni-4%Mn-1%Zn alloy. Scanning electron microscope (SEM) and vibrating sample magnetometer (VSM) characterization techniques were employed for the investigation. Scanning electron microscope observations showed that while martensite formation in the austenite phase of alloy exhibited a lath morphology by thermal effect, elongated deformation-induced martensite morphology exists after deformation. The Curie temperatures were detected at about 201 K for thermal-induced martensite and at about 226 K for deformation-induced martensite from VSM measurements. The magnetic saturation values were determined as about 21 emu g{sup −1} for thermal-induced martensite and 23 emu g{sup −1} for deformation-induced martensite. We found that magnetic saturation increased with deformation effect. On the other hand, VSM offered the soft ferromagnetic characteristic with coersive values of 36 Oe for thermal-induced martensite and the soft ferromagnetic characteristic with 47 Oe for deformation-induced martensite. The changes in the magnetic properties resulting from the thermal and deformation affect were clearly determined. Deformation caused magnetic stabilization in Fe-27%Ni-4%Mn-1%Zn alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation, Electrical and Magnetic Properties of Poly(m-phenylenediamine)/ZnFe{sub 2}O{sub 4} Nanocomposites

The different ratios of ZnFe{sub 2}O{sub 4} nanoparticles (10 and 20%) were wrapped on poly(m-phenylenediamine) through in situ oxidative polymerization method. The formation of PmPD/ZnFe{sub 2}O{sub 4} nanocomposites was confirmed through FTIR spectroscopy and XRD pattern. From the XRD results, the average crystalline size of ZnFe{sub 2}O{sub 4} nanoparticles and PmPD/ZnFe{sub 2}O{sub 4} nanocomposites were also calculated. The SEM image of ZnFe{sub 2}O{sub 4} nanoparticles shows granular morphology and FESEM images of PmPD/ZnFe{sub 2}O{sub 4} nanocomposites indicate the ZnFe{sub 2}O{sub 4} nanoparticles are agglomerated on PmPD matrix. The soft magnetic behavior of ZnFe{sub 2}O{sub 4} nanoparticles and PmPD/ZnFe{sub 2}O{sub 4} nanocomposites were observed from vibrating sample magnetometer. The dielectric properties of PmPD/ZnFe{sub 2}O{sub 4} nanocomposites were studied with different temperatures and frequencies. The magnetic properties of ZnFe{sub 2}O{sub 4} nanoparticles were also analyzed through Mössbauer spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Microstructural Analysis of Magnetic CaFe{sub 0.5}Co{sub 0.5}O{sub 3−δ} Using Rietveld Method

Perovskite cobaltates are widely recognized as potential candidates for their applications in magnetic and magnetoresistive applications. In this report, pseudo-magnetic CaFe{sub 0.5}Co{sub 0.5}O{sub 3−δ} was synthesized at ambient pressure. Various calcinations, heating times, and sintering temperatures were applied in order to achieve the optimized conditions. The optimal sintering temperature with excellent phase and microstructure was found at ∼1050 °C using CaCO{sub 3} as precursor. Rietveld analysis was carried out to solve and refine the XRD pattern of the final specimens. The sample with excellent refined values was solved in orthorhombic phase and pbcm space group. From the SEM and EDS analysis, the excellent grain growth with high densification and ABO{sub 3} structure was confirmed respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Magnetic, and Dielectric Properties of Conventional- and Microwave-Sintered Ni{sub 0.6}Zn{sub 0.4−x}Cu{sub x}Fe{sub 2}O{sub 4}

In the present work, structural, magnetic, and dielectric properties of conventional- and microwave-sintered Ni{sub 0.6}Zn{sub 0.4-x}Cu{sub x}Fe{sub 2}O{sub 4} (x = 0.0 to 0.4 in steps of 0.1) are studied. X-ray diffraction measurements confirm the formation of a single spinel phase. Crystallite size estimated from Scherrer’s method found between 30–41 nm and 36–28.5 nm in conventional- and microwave-sintered samples respectively. The lattice constant decreases with Cu substitution, suggesting the incorporation of Cu into the spinel lattice. SEM images reveal that microwave sintering results in larger grains with intragranular pores. Saturation magnetization was found to decrease with Cu content. Cation distribution estimated from the magnetization data supports the observed changes in magnetic parameters. A significant influence on microstructure and cation redistribution on dielectric properties are observed for microwave-sintered samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the Fe/Ba Ratio and Sintering Temperature on Microstructure and Magnetic Properties of Barium Ferrites Prepared by Hydrothermal Method

Magnetoplumbite-type (M-type) hexagonal barium ferrite particles were synthesized by a hydrothermal method. The structure and magnetic properties of barium ferrites were investigated systematically, which indicated that the ratio of Fe/Ba (R{sub F/B}) and sintering temperature have an important effect on structure and performance. Phase composition, micro-morphology, and magnetic properties of the particles were investigated by X-ray powder diffraction (XRD) analysis, scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM). When the ratio of Fe/Ba (R{sub F/B}) is even low or high, inferior images of XRD could be attained with certain impurities. When R{sub F/B} = 8, the single phase could be obtained without impurities. Micro-morphology of the particles exhibits the uniform plane hexagonal structures of nano-sized M-type ferrites when sintered at 800 °C. Saturation magnetization (M{sub s}) reaches the maximum value at R{sub F/B} = 7 (M{sub s} = 45.07 emu/g). The value of coercivity (H{sub c}) increases with the growth of R{sub F/B}, and H{sub c} is up to 6207 Oe when R{sub F/B} = 7. The effect of R{sub F/B} and temperature on magnetization (M{sub s}) and coercivity (H{sub c}) was studied in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of Critical Current Density of MgB{sub 2} by Glutaric Acid Doping: a Simultaneous Improvement on the Intrinsic and Extrinsic Properties

In this study, we report an enhancement of critical current density of bulk MgB{sub 2} superconductors by glutaric acid (C{sub 5}H{sub 8}O{sub 4}) doping. The effects of glutaric acid doping on MgB{sub 2} lattice resulted in a record self-field J{sub c} of the order of 10{sup 6} A/cm{sup 2}. A simultaneous improvement in the connectivity, pinning force, and H{sub c2} is the major factor that determined excellent J{sub c} performance. X-ray diffraction analysis showed that samples were single-phase MgB{sub 2} with a minor trace of impurities. A dramatic change in grain morphology and homogeneity in grain distribution was found in the SEM images of doped samples. We observed that homogeneity in grain distribution played a crucial role in the connectivity and the upper critical field (H{sub c2}) of the doped samples. We were able to introduce a new dopant through a two-step mixing approach which is suitable to overcome the degradation of low field and self-field J{sub c} reported for carbon-doped MgB{sub 2} superconductor samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Characterization of Ni{sub 1−x}Cu{sub x}Bi{sub 3} Superconductor

In this paper, we characterized the microstructure and superconducting properties of Cu-doped NiBi{sub 3} samples. The polycrystalline Ni{sub 1−x}Cu{sub x}Bi{sub 3} (0 ≤ x ≤ 0.10) samples were prepared using a solid-state reaction method. The crystal structure and unit cell parameters were determined by Rietveld refinement of powder X-ray diffraction. The data showed that the main phase present corresponded to NiBi{sub 3} without dependence on the Cu concentration, but with small quantities of Ni and Bi. The SEM and AFM measurements revealed that the main phase was inhomogeneous at microscopic level, with Bi richer regions in comparison to other regions. However, Raman spectroscopy results did not show significant changes in the spectra with Cu doping and in different regions of the samples. Another finding was that regardless of Cu doping, the superconducting transition temperature was 4.05–4.06 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Characterization of Sol–Gel Auto Combustion-Derived Ce/Zr-Substituted Strontium Hexaferrite Nanoparticles

In this work, Ce/Zr-substituted strontium hexaferrite (SrFe{sub 12}O{sub 19}) nanoparticles have been synthesized by the sol–gel auto combustion method and the synthesized samples were annealed at 900 {sup ∘}C for 3 h. The powder XRD pattern revealed that all the diffraction peaks match the hexagonal phase of strontium hexaferrite and the lattice parameters are determined. The VSM study revealed that the values of saturation magnetization, coercivity and remanent magnetization are decreased for the Ce/Zr-substituted strontium hexaferrite sample. Thermal analysis reveals the formation of a hexagonal phase above 670 {sup ∘}C. The specific vibration band of hexagonal ferrite was observed in the range 400–600 cm{sup −1}. The FE-SEM image shows that the particles are spherical shaped and particle size varied from 37 to 44 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Electrical and Dielectric Properties of Hexa-ferrite-Polyaniline Nano-composites

Ferrite-polyaniline (PANI) composites were prepared by in situ polymerization of polyaniline with the general formula (1 − x) ferrite + (x) PANI where x = 0, 0.25, 0.5, 0.75, 1. The samples were characterized by XRD, SEM, electrical resistivity, and dielectric measurements. X-ray diffraction reveals single phase formation of CaBaCo{sub 2}Al{sub 0.5}Fe{sub 11.5}O{sub 22} Y-type ferrite, whereas polyaniline exhibits an amorphous nature. At room temperature, the resistivity of nano-composites increases with the increase of ferrite filler contents from 3.17 × 10{sup 4} to 3.19 × 10{sup 7} Ω cm. Real and imaginary parts of the complex permittivity of the PANI-ferrite composites follow the Maxwell-Wagner model. Based on the Jonscher Law, the AC conductivity of PANI-ferrite composites experiences an increase with the increase in frequency. The exponent calculated from AC conductivity reveals that the hopping is the likely conduction mechanism. The activation energy obtained from temperature-dependent measurements is consistent with room temperature resistivity. Due to the light weight, low cost and flexibility of design, the ferrite-polymer composites are considered useful for microwave devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of (DNPs){sub x}/CuTl-1223 Nanoparticle-Superconductor Composites

Sol-gel and solid-state reaction methods were used to synthesize diamond nanoparticles (DNPs) and (DNPs){sub x}/CuTl-1223 (x = 0, 0.25, 0.50, and 1.00 wt.%) nanoparticle-superconductor composites, respectively. Effects of these DNPs on structural, morphological, compositional, and transport properties of CuTl-1223 superconducting phase were investigated by different experimental techniques such as X-ray diffraction (XRD), energy dispersive X-ray (EDX) spectroscopy, scanning electron microscopy (SEM), and resistivity versus temperature (R-T) measurements. The unchanged crystal structure and stoichiometry of host CuTl-1223 superconducting matrix with addition of DNPs gave evidence about the dispersion of nanoparticles at the grain boundaries of the host matrix, which may heal up the inter-granular voids and pores resulting in enhanced inter-grain connectivity. Critical transition temperature T{sub c} (0) and hole concentration of CuTl-1223 superconductor were observed to be increased with addition of DNPs up to a certain optimum value (i.e. x = 0.5 wt.%).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Josephson Effect in the Micron and Submicron YBCO Constrictions Fabricated Using the Femtosecond Laser Technique

A femtosecond laser was used successfully to fabricate planar micron and submicron-sized constrictiontype Josephson junctions on YBa{sub 2}Cu{sub 3}O{sub 7−x} thin films. A simple program using G-code (control systems) programming language was written to control the movement of the sample stage during the etching process. The constriction’s geometry was investigated using both atomic force microscopy (AFM) and scanning electron microscopy (SEM). Electrical transport measurements were performed at different temperatures. Shapiro steps were observed and analyzed. The micron-sized constriction shows a linear relationship for the measured critical current against the temperature which is consistent with the behavior of an S–s’–Stype Josephson junction where “S” stands for a bulk superconductive material that is untouched by the laser and “s”’ is superconducting material whose critical temperature is lower than the value of “S” In the case of the narrower submicronsized constriction, the measured critical current dependence with temperature shows an exponential decay, which is consistent with the behavior of the long S–N–Stype Josephson junction where “N” stands for a normal material. A model is proposed to describe the observed behavior by considering the effect of sample heating during the constriction’s fabrication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Facile Low-Temperature Synthesis of MnLa{sub x}Fe{sub 2−x}O{sub 4} Nanoferrites with Structural and Electrical Characterization

A series of nanocrystalline lanthanum-substituted manganese ferrite having compositional formula MnLa{sub x}Fe{sub 2−x}O{sub 4} (x = 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by a chemical co-precipitation method. Phase analysis was carried out using XRD. It reveals the formation of spinel phase without any unwanted secondary phases. The formation of single-phase spinel structure was supported by FTIR studies. Microstructural study was carried out using SEM. Elemental composition was studied using EDX. Electrical properties namely frequency variation of dielectric constant, dielectric loss tangent, and ac conductivity of prepared nanoferrites were studied. The observed electrical properties were discussed and explained in terms of hopping mechanism of charge carrier in ferrites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exchange Bias Effect in FeCo Nanoparticles

The exchange bias fields in FeCo nanoparticles are investigated. A series of Fe{sub 1−x}Co{sub x} ( x =0.3, 0.5, and 0.7) NPs were fabricated using the hydrothermal method. XRD studies determined that the structures of the first two NPs were body-centered cubic (BCC) while that of the third was of a disordered structure having a few small disordered BCC crystallites. SEM images of the first two showed that these nanocrystals have well-structured pyramid shapes with planar surfaces on them. FC and ZFC magnetization curves showed the temperature dependences of the magnetization of the first two FeCo NPs were different from that of the third FeCo NPs. The hysteresis loops measured at 300, 150, and 10 K showed horizontal shifts of several of the loops. The exchange bias fields at 10 K of the three FeCo NPs were small but in two of them, the Fe{sub 0.7}Co{sub 0.3} and the Fe{sub 0.3}Co{sub 0.7} NPs, the fields were large at 150 K. The exchange bas field in the first NPs remained large as the temperature was raised to 300 K. H{sub E} for the last FeCo NPs became small again at 300 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and Analysis of Tri-layer YBa{sub 2}Cu{sub 3}O{sub 7−δ} Thick Films by Low-Fluorine MOD Method

Improving the thickness of superconducting layer in coated conductors is an effective way to enhance its critical current. In this work, tri-layer YBCO/YBCO/YDyBCO films were successfully deposited on buffered Hastelloy substrate using the multi-coating lowfluorine metal-organic decomposition (LF-MOD) method and the thickness of the films can be up to 2.4 μ m. The effects of high-temperature annealing time on microstructures and superconducting properties of the films were systematically studied. Energy dispersive X-ray spectroscopy (EDS) results reveal that there remains a large amount of F element in the upper layer of the film when the annealing time is too short. With increasing the annealing time, the fluoride-containing precursor converts to YBCO grains completely. But the coarsening of grains appeared, and the critical current density (J{sub c}) of the film dropped slightly when the annealing time is too long. The cross-sectional scanning electron microscope (SEM) image and EDS plane analysis were applied to investigate the microstructure and element distribution of the final triple-layer YBCO films, respectively. The critical current of the final YBCO superconducting film could reach 316 A (77 k, self-field) for 1.2-cm-wide tapes with the optimal annealing conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Analysis and Magnetic Properties of Lithium-Doped Ni-Zn Ferrite Nanoparticle

Lithium-doped nickel-zinc ferrite compound with formula Ni{sub 0.8}Zn{sub 0.2−2x}Li{sub x}Fe{sub 2+x}O{sub 4} (x = 0, 0.01, 0.03, 0.05) was prepared using the sol-gel technique. The results of XRD proved a cubic spinel system of crystal. The lattice parameters, average particle sizes, and crystal density were calculated. It was found that the distance between magnetic ions decreases with lithium concentration and crystal density values ranging from 5.3 to 5.2 g/cm{sup 3}. SEM and AFM show the lithium substitution effect on the morphology of the samples. The saturation magnetization (M{sub s}) and coercivity (H{sub c}) of Ni{sub 0.8}Zn{sub 0.2−2x}Li{sub x}Fe{sub 2+x}O{sub 4} increase with an increasing content of Li{sup 1+} ion, where x is equal to 0, 0.01, 0.03, and 0.05. The M{sub s} and H{sub c} increase from 52 to 65 emu/g and from 99 to 119 Oe, respectively. The squareness ratio (M{sub r}/M{sub s}) appeared at a maximum value of x = 0.01.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Nd, Er Doping on the Structure and Magnetic Properties of YFeO{sub 3}

Nd, Er co-doped YFeO{sub 3} compounds were synthesized by sol-gel method. The prepared compounds were characterized by powder x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive x-ray (EDX), and vibrating sample magnetometer (VSM) integrated in a physical property measurement system (PPMS-9), respectively. The results show that the compounds possess orthorhombic perovskite structure. The Y{sub 0.5}Er{sub 0.1}Nd{sub 0.4}FeO{sub 3} compound mainly consists of five elements (Er, Nd, Y, Fe, and O) and atom ratio matched well with the formula. With the increase of Nd{sup 3+} doping content in Y{sub 0.5}Er{sub 0.5−x}Nd{sub x}FeO{sub 3} (x = 0, 0.1, 0.2, 0.3, and 0.4), the coercivity increases gradually while the saturation magnetization and remanent magnetization decrease at the same time. Introducing Nd{sup 3+} and Er{sup 3+} ions into YFeO{sub 3} will make a change on a structure distortion, resulting in the decrease of the Fe–O–Fe angle and the consequent reduction of superexchange effect. From our research results, the relationship between the r (R{sup 3+}) and the superexchange bond angle is different from pure-phase orthoferrites R FeO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗