Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RISE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Impact of the hydrogen content on the photoluminescence efficiency of amorphous silicon alloys

This paper analyzes the impact of hydrogen on the photoluminescence (PL) efficiency of the three wide gap silicon alloys: silicon carbide (a-SiC{sub x}), silicon nitride (a-SiN{sub x}): silicon oxide (a-SiO{sub x}). All three materials behave similarly. The progression of the PL efficiency over the Si content splits into two regions. With decreasing Si content, the PL efficiency increases until a maximum is reached. With a further decrease of the Si content, the PL efficiency declines again. A comprehensive analysis of the sample structure reveals that the PL efficiency depends on the degree of passivation of Si and Y atoms (Y = C, N, O) with hydrogen. For samples with a high Si content, an effective passivation of incorporated Y atoms gives rise to an increasing PL efficiency. The PL efficiency of samples with a low Si content is limited due to a rising amount of unpassivated Si defect states. We find that a minimum amount of 0.2 H atoms per Si atom is required to maintain effective luminescence.

36 MATERIALS SCIENCE↗

Detailed photoluminescence studies of thin film Cu{sub 2}S for determination of quasi-Fermi level splitting and defect levels

We have studied chalcocite (Cu{sub 2}S) layers prepared by physical vapor deposition with varying deposition parameters by calibrated spectral photoluminescence (PL) and by confocal PL with lateral resolution of Δ x≈0.9 μm. Calibrated PL experiments as a function of temperature T and excitation fluxes were performed to obtain the absolute PL-yield and to calculate the splitting of the quasi-Fermi levels (QFLs) μ=E{sub f,n}−E{sub f,p} at an excitation flux equivalent to the AM 1.5 spectrum and the absorption coefficient α(ℏω), both in the temperature range of 20 K≤T≤400 K. The PL-spectra reveal two peaks at E{sub #1}=1.17 eV and E{sub #2}=1.3 eV. The samples show a QFL-splitting of μ>700 meV associated with a pseudo band gap of E{sub g}=1.25 eV. The high-energy peak shows an unexpected temperature behavior, namely, an increase of PL-yield with rising temperature at variance with the behavior of QFL-splitting that decreases with rising T. Our observations indicate that, contrary to common believe, it is not the PL-yield, but rather the QFL-splitting that is the comprehensive indicator of the quality of the excited state in an illuminated semiconductor. A further examination of the lateral variation of opto-electronic properties by confocal PL and the surface contour shows no detectable correlation between Cu{sub 2}S grains/grain boundaries and the PL-yield or QFL-splitting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristic evaluation of cooling technique using liquid nitrogen and metal porous media

A remountable high-temperature superconducting magnet, whose segments can be mounted and demounted repeatedly, has been proposed for construction and maintenance of superconducting magnet and inner reactor components of a fusion reactor. One of the issues in this design is that the performance of the magnet deteriorates by a local temperature rise due to Joule heating in jointing regions. In order to prevent local temperature rise, a cooling system using a cryogenic coolant and metal porous media was proposed and experimental studies have been carried out using liquid nitrogen. In this study, flow and heat transfer characteristics of cooling system using subcooled liquid nitrogen and bronze particle sintered porous media are evaluated through experiments in which the inlet degree of subcooling and flow rate of the liquid nitrogen. The flow characteristics without heat input were coincided with Ergun’s equation expressing single-phase flow in porous materials. The obtained boiling curve was categorized into three conditions; convection region, nucleate boiling region and mixed region with nucleate and film boiling. Wall superheat did not increase drastically with porous media after departure from nucleate boiling point, which is different from a situation of usual boiling curve in a smooth tube. The fact is important characteristic to cooling superconducting magnet to avoid its quench. Heat transfer coefficient with bronze particle sintered porous media was at least twice larger than that without the porous media. It was also indicated qualitatively that departure from nucleate boiling point and heat transfer coefficient depends on degree of subcooling and mass flow rate. The quantitative evaluation of them and further discussion for the cooling system will be performed as future tasks.

42 ENGINEERING↗

Ground states of nonlinear Schrödinger systems with saturable nonlinearity in R{sup 2} for two counterpropagating beams

Counterpropagating optical beams in nonlinear media give rise to a host of interesting nonlinear phenomena such as the formation of spatial solitons, spatiotemporal instabilities, self-focusing and self-trapping, etc. Here we study the existence of ground state (the energy minimizer under the L{sup 2}-normalization condition) in two-dimensional (2D) nonlinear Schrödinger (NLS) systems with saturable nonlinearity, which describes paraxial counterpropagating beams in isotropic local media. The nonlinear coefficient of saturable nonlinearity exhibits a threshold which is crucial in determining whether the ground state exists. The threshold can be estimated by the Gagliardo-Nirenberg inequality and the ground state existence can be proved by the energy method, but not the concentration-compactness method. Our results also show the essential difference between 2D NLS equations with cubic and saturable nonlinearities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Do dispersive waves play a role in collisionless magnetic reconnection?

Using fully kinetic simulations, we demonstrate that the properly normalized reconnection rate is fast ∼0.1 for guide fields up to 80× larger than the reconnecting field and is insensitive to both the system size and the ion to electron mass ratio. These results challenge conventional explanations of reconnection based on fast dispersive waves, which are completely absent for sufficiently strong guide fields. In this regime, the thickness of the diffusion layer is set predominantly by the electron inertial length with an inner sublayer that is controlled by finite gyro-radius effects. As the Alfvén velocity becomes relativistic for very strong guide fields, the displacement current becomes important and strong deviations from charge neutrality occur, resulting in the build-up of intense electric fields which absorb a portion of the magnetic energy release. Over longer time scales, secondary magnetic islands are generated near the active x-line while an electron inertial scale Kelvin-Helmholtz instability is driven within the outflow. These secondary instabilities give rise to time variations in the reconnection rate but do not alter the average value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time resolved imaging of magnetization dynamics in hard disk writer yokes excited by bipolar current pulses

A partially built hard disk writer structure with a NiFe/CoFe/Ru/NiFe/CoFe synthetic antiferromagnetic (SAF) yoke was studied by time and vector resolved scanning Kerr microscopy. All three time dependent components of the magnetization were recorded simultaneously as a bipolar current pulse with 1 MHz repetition rate was delivered to the coil. The component of magnetization parallel to the symmetry axis of the yoke was compared at the pole and above a coil winding in the centre of the yoke. The two responses are in phase as the pulse rises, but the pole piece lags the yoke as the pulse falls. The Kerr signal is smaller within the yoke than within the confluence region during pulse cycling. This suggests funneling of flux into the confluence region. Dynamic images acquired at different time delays showed that the relaxation is faster in the centre of the yoke than in the confluence region, perhaps due to the different magnetic anisotropy in these regions. Although the SAF yoke is designed to support a single domain to aid flux conduction, no obvious flux beaming was observed, suggesting the presence of a more complicated domain structure. The SAF yoke writer hence provides relatively poor flux conduction but good control of rise time compared to single layer and multi-layered yokes studied previously.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitons in a quasi-one-dimensional quantum nanorod under a strong electric field

The response of an exciton in the ground and first excited states to a strong DC electric field is studied in a quasi-one-dimensional nano quantum well (i.e., nanorod) bounded by high symmetric barriers by studying the energy, the oscillator strength, the root-mean-square (RMS) average of the electron-hole (e-h) separation, and the average positions of the electron and the hole. The interplaying effect between the barrier confinement, e-h attraction, and the field-induced e-h separation for exciton binding is examined. We find that, for a long nanorod, the exciton energy, as well as, the oscillator strength drops abruptly as a function of the field near the exciton-dissociation field while the RMS average of the e-h separation rises rapidly. For shorter rods, the transition is more gradual due to the combined effect of the confinement and the long-range e-h interaction. A strong field is shown to transform the optically-inactive first excited state into an optically-active state in the field range between the dissociation field of the ground state and that of the first excited level. We also find that, in the ground state, the (lighter) electron is dragged by the (heavier) hole below the dissociation field. The dependence of the above mentioned properties on the rod length is also investigated for varying fields. The results are compared with those obtained for the rods with parabolic confinement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geometric uncertainty relation for mixed quantum states

In this paper we use symplectic reduction in an Uhlmann bundle to construct a principal fiber bundle over a general space of unitarily equivalent mixed quantum states. The bundle, which generalizes the Hopf bundle for pure states, gives in a canonical way rise to a Riemannian metric and a symplectic structure on the base space. With these we derive a geometric uncertainty relation for observables acting on quantum systems in mixed states. We also give a geometric proof of the classical Robertson-Schrödinger uncertainty relation, and we compare the two. They turn out not to be equivalent, because of the multiple dimensions of the gauge group for general mixed states. We give examples of observables for which the geometric relation provides a stronger estimate than that of Robertson and Schrödinger, and vice versa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Classical non-Markovian Boltzmann equation

The modeling of particle transport involves anomalous diffusion, (x²(t) ) ∝ t{sup α} with α ≠ 1, with subdiffusive transport corresponding to 0 < α < 1 and superdiffusive transport to α > 1. These anomalies give rise to fractional advection-dispersion equations with memory in space and time. The usual Boltzmann equation, with only isolated binary collisions, is Markovian and, in particular, the contributions of the three-particle distribution function are neglected. We show that the inclusion of higher-order distribution functions give rise to an exact, non-Markovian Boltzmann equation with resulting transport equations for mass, momentum, and kinetic energy with memory in both time and space. The two- and the three-particle distribution functions are considered under the assumption that the two- and the three-particle correlation functions are translationally invariant that allows us to obtain advection-dispersion equations for modeling transport in terms of spatial and temporal fractional derivatives.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fast penetration of megagauss fields into metallic conductors

Megagauss magnetic-field penetration into a conducting material is studied via a simplified but representative model, wherein the magnetic-diffusion equation is coupled with a thermal-energy balance. The specific scenario considered is that of a prescribed magnetic field rising (in proportion to an arbitrary power r of time) at the surface of a conducting half-space whose electric conductivity is assumed proportional to an arbitrary inverse power γ of temperature. We employ a systematic asymptotic scheme in which the case of a strong surface field corresponds to a singular asymptotic limit. In this limit, the highly magnetized and hot “skin” terminates at a distinct propagating wave-front. Employing the method of matched asymptotic expansions, we find self-similar solutions of the magnetized region which match a narrow boundary-layer region about the advancing wave front. The rapidly decaying magnetic-field profile in the latter region is also self similar; when scaled by the instantaneous propagation speed, its shape is time-invariant, depending only on the parameter γ. The analysis furnishes a simple asymptotic formula for the skin-depth (i.e., the wave-front position), which substantially generalizes existing approximations. It scales with the power γr + 1∕2 of time and the power γ of field strength, and is much larger than the field-independent skin depth predicted by an athermal model. The formula further involves a dimensionless O(1) pre-factor which depends on r and γ. It is determined by solving a nonlinear eigenvalue problem governing the magnetized region. Another main result of the analysis, apparently unprecedented, is an asymptotic formula for the magnitude of the current-density peak characterizing the wave-front region. Complementary to these systematic results, we provide a closed-form but ad hoc generalization of the theory approximately applicable to arbitrary monotonically rising surface fields. Our results are in excellent agreement with numerical simulations of the model, and compare favourably with detailed magnetohydrodynamic simulations reported in the literature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of ferroelectric correlations in the quantum paraelectric and antiferrodistortive regimes in Ba{sub x}Sr{sub 1-x}TiO{sub 3} (x ≤ 0.10)

The dielectric response ε(T) of Ba{sub x}Sr{sub 1-x}TiO{sub 3} (x ≤ 0.1) for compositions at and below the critical composition for the ferroelectric transition has been studied. With progressive Ba substitution, the growth of ferroelectric correlations and the weakening of the Antiferrodistortive (AFD) and the quantum paraelectric (QPE) effects have been studied by monitoring the changes in both the in and out of phase parts of the dielectric response. For the compositions close to pure SrTiO{sub 3} (x = 0 and x = 0.02), the temperature dependence exhibits a continuous rise in the in-phase part and no ferroelectric peak, consistent with the QPE behavior. With increasing Ba substitution, the low temperature behavior of the in phase part ε{sup ′} progressively changes from a continuous rise to exhibit a weak maximum and finally to a well developed cusp. For higher Ba concentrations, the low temperature peak (T ∼ 50K), which corresponds to ferroelectric correlations, becomes increasingly sharper until at the critical composition, x = 0.10, the system shows a single well defined ferroelectric peak. However, the out of phase response of the x = 0.1 composition exhibited a succession of three BaTiO{sub 3} type ferroelectric transitions. For x≤0.04, the out of phase part shows evidence of an ordering around T ∼ 100K, which is the expected AFD ordering temperature. The deviations of the ε{sup ′}(T) data from the Curie-Weiss law have been analyzed within the frame work of two different theoretical models. It was determined that the dielectric behavior for lower concentrations of Ba (up to x ≤ 0.08) was explainable in terms of a model of non-interacting regions which are themselves homogeneously polarized and undergo a second order phase transition. For the phase boundary composition, i.e., x = 0.1, on the other hand, the data are explainable in terms of the Sherrington and Kirkpatrick model which includes the effects of weak correlations between the polar regions characterized by a glassy order parameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exchange bias effect in epitaxial La{sub 0.67}Ca{sub 0.33}MnO{sub 3}/SrMnO{sub 3} thin film structure

Bilayers consisting of La{sub 0.67}Ca{sub 0.33}MnO{sub 3} (LCMO) and SrMnO{sub 3} (SMO) have been prepared by pulsed-laser deposition on SrTiO{sub 3} (001) substrates. Unconventional magnetic coupling was found after cooling in a small field. The LCMO/SMO bilayers exhibit an exchange bias field of 209 Oe, which vanishes as the temperature rises above 90 K. A small magnetization has been found above the Curie temperature of the pure LCMO thin films. Spin-cluster-like antiferromagnetic (AFM)/ferromagnetic (FM) clusters have been deduced to exist at the interface due to the competing types of magnetic order at the interface. The magnetic relaxation is found to follow a double-exponential equation and a slow relaxation process is observed due to the strong exchange coupling between AFM/FM clusters and the LCMO layer. We speculate that the short-range high-temperature FM order of the Mn{sup 3+} and Mn{sup 4+} moments above the Curie temperature at the interface gives rise to the magnetic regions that pin the FM LCMO layer as the temperature decreases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Remediation of AMD using natural and waste material

Acid Mine Drainage (AMD) is highly acidic, sulphate rich and frequently carries a high transition metal and heavy metal burden. These AMD's eventually migrate into streams and rivers and impact negatively on the quality of these water bodies. So it is dire necessary to treat this AMD. Various materials such as ladle furnace slag (LFS), bentonite, zeolite, active carbon and kaolinite are currently available to remove heavy metals from contaminated water. All these materials are capable to rise up the pH value and adsorb heavy metals. The process is divided into two stages; screening test and tank experiment. Screening test is conduct by using Batch Equilibrium Test (BET), X-Ray Fluorescene (XRF) identification also Scanning Electron Microscopic (SEM) characteristic. The results showed that all the concentration of heavy metal are decreasing extremely and pH value rise up except for kaolinite. From screening test only ladle furnace slag, bentonite, zeolite and active carbon are chosen for the tank experiment. Tank experiment design with 18cm (H) X 15cm (L) X 15cm (H) was made by silica glass. All these treatment materials were stirred in the tank for 30 days. Initial pH for all tanks is 2.4 and after 30 days is changing into 6.11, 3.91, 2.98 and 2.71 for LFS, bentonite, active carbon as well as zeolite respectively. LFS is the best material for absorption of Zn, Mn and Cu in the synthetic solution. Meanwhile, bentonite is the best absorbent for Ni, Fe and Cd. The conclusion shows that LFS might have big potentials to control AMD pollution base on neutralize pH resulting in a great improvement in the quality of the water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanometer-scale temperature imaging for independent observation of Joule and Peltier effects in phase change memory devices

This paper reports a technique for independent observation of nanometer-scale Joule heating and thermoelectric effects, using atomic force microscopy (AFM) based measurements of nanometer-scale temperature fields. When electrical current flows through nanoscale devices and contacts the temperature distribution is governed by both Joule and thermoelectric effects. When the device is driven by an electrical current that is both periodic and bipolar, the temperature rise due to the Joule effect is at a different harmonic than the temperature rise due to the Peltier effect. An AFM tip scanning over the device can simultaneously measure all of the relevant harmonic responses, such that the Joule effect and the Peltier effect can be independently measured. Here we demonstrate the efficacy of the technique by measuring Joule and Peltier effects in phase change memory devices. By comparing the observed temperature responses of these working devices, we measure the device thermopower, which is in the range of 30 ± 3 to 250 ± 10 μV K{sup −1}. This technique could facilitate improved measurements of thermoelectric phenomena and properties at the nanometer-scale.

42 ENGINEERING↗

Direct evidence of strong local ferroelectric ordering in a thermoelectric semiconductor

It is thought that the proposed new family of multi-functional materials, namely, the ferroelectric thermoelectrics may exhibit enhanced functionalities due to the coupling of the thermoelectric parameters with ferroelectric polarization in solids. Therefore, the ferroelectric thermoelectrics are expected to be of immense technological and fundamental significance. As a first step towards this direction, it is most important to identify the existing high performance thermoelectric materials exhibiting ferroelectricity. Herein, through the direct measurement of local polarization switching, we show that the recently discovered thermoelectric semiconductor AgSbSe{sub 2} has local ferroelectric ordering. Using piezo-response force microscopy, we demonstrate the existence of nanometer scale ferroelectric domains that can be switched by external electric field. These observations are intriguing as AgSbSe{sub 2} crystalizes in cubic rock-salt structure with centro-symmetric space group (Fm–3m), and therefore, no ferroelectricity is expected. However, from high resolution transmission electron microscopy measurement, we found the evidence of local superstructure formation which, we believe, leads to local distortion of the centro-symmetric arrangement in AgSbSe{sub 2} and gives rise to the observed ferroelectricity. Stereochemically active 5S{sup 2} lone-pair of Sb may also give rise to local structural distortion thereby creating ferroelectricity in AgSbSe{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct observation of resistive heating at graphene wrinkles and grain boundaries

We directly measure the nanometer-scale temperature rise at wrinkles and grain boundaries (GBs) in functioning graphene devices by scanning Joule expansion microscopy with 50 nm spatial and 0.2K temperature resolution. We observe a small temperature increase at select wrinkles and a large (100 K) temperature increase at GBs between coalesced hexagonal grains. Comparisons of measurements with device simulations estimate the GB resistivity (8 150 X lm) among the lowest reported for graphene grown by chemical vapor deposition. An analytical model is developed, showing that GBs can experience highly localized resistive heating and temperature rise, most likely affecting the reliability of graphene devices. Our studies provide an unprecedented view of thermal effects surrounding nanoscale defects in nanomaterials such as graphene.

grain boundary↗

Time-resolved characterization and energy balance analysis of implosion core in shock-ignition experiments at OMEGA

Time-resolved temperature and density conditions in the core of shock-ignition implosions have been determined for the first time. The diagnostic method relies on the observation, with a streaked crystal spectrometer, of the signature of an Ar tracer added to the deuterium gas fill. The data analysis confirms the importance of the shell attenuation effect previously noted on time-integrated spectroscopic measurements of thick-wall targets [R. Florido et al., Phys. Rev. E 83, 066408 (2011)]. This effect must be taken into account in order to obtain reliable results. The extracted temperature and density time-histories are representative of the state of the core during the implosion deceleration and burning phases. As a consequence of the ignitor shock launched by the sharp intensity spike at the end of the laser pulse, observed average core electron temperature and mass density reach T ~ 1100 eV and ρ ~ 2 g/cm 3 ; then temperature drops to T ~ 920 eV while density rises to ρ ~ 3.4 g/cm 3 about the time of peak compression. Compared to 1D hydrodynamic simulations, the experiment shows similar maximum temperatures and smaller densities. Simulations do not reproduce all observations. Differences are noted in the heating dynamics driven by the ignitor shock and the optical depth time-history of the compressed shell. Time-histories of core conditions extracted from spectroscopy show that the implosion can be interpreted as a two-stage polytropic process. Furthermore, an energy balance analysis of implosion core suggests an increase in total energy greater than what 1D hydrodynamic simulations predict. This new methodology can be implemented in other ICF experiments to look into implosion dynamics and help to understand the underlying physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

(Ca,Na)(Zn,Mn){sub 2}As{sub 2}: A new spin and charge doping decoupled diluted ferromagnetic semiconductor

Here, we report the successful synthesis of a spin- and charge-decoupled diluted magnetic semiconductor (DMS) (Ca,Na)(Zn,Mn){sub 2}As{sub 2}, crystallizing into the hexagonal CaAl{sub 2}Si{sub 2} structure. The compound shows a ferromagnetic transition with a Curie temperature up to 33 K with 10% Na doping, which gives rise to carrier density of n{sub p} ∼ 10{sup 20 }cm{sup −3}. The new DMS is a soft magnetic material with H{sub C} < 400 Oe. The anomalous Hall effect is observed below the ferromagnetic ordering temperature. With increasing Mn doping, ferromagnetic order is accompanied by an interaction between the local spin and mobile charge, giving rise to a minimum in resistivity at low temperatures and localizing the conduction electrons. The system provides an ideal platform for studying the interaction of the local spins and conduction electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗