Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RESINS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

RAPID SEPARATION METHOD FOR ACTINIDES IN EMERGENCY SOIL SAMPLES

A new rapid method for the determination of actinides in soil and sediment samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used for samples up to 2 grams in emergency response situations. The actinides in soil method utilizes a rapid sodium hydroxide fusion method, a lanthanum fluoride soil matrix removal step, and a streamlined column separation process with stacked TEVA, TRU and DGA Resin cartridges. Lanthanum was separated rapidly and effectively from Am and Cm on DGA Resin. Vacuum box technology and rapid flow rates are used to reduce analytical time. Alpha sources are prepared using cerium fluoride microprecipitation for counting by alpha spectrometry. The method showed high chemical recoveries and effective removal of interferences. This new procedure was applied to emergency soil samples received in the NRIP Emergency Response exercise administered by the National Institute for Standards and Technology (NIST) in April, 2009. The actinides in soil results were reported within 4-5 hours with excellent quality.

54 ENVIRONMENTAL SCIENCES↗

Investigation of Polymer Resin/Fiber Compatibility in Natural Fiber Reinforced Composite Automotive Materials

Natural fibers represent a lower density and potentially lower cost alternative to glass fibers for reinforcement of polymers in automotive composites. The high specific modulus and strength of bast fibers make them an attractive option to replace glass not only in non-structural automotive components, but also in semi-structural and structural components. Significant barriers to insertion of bast fibers in the fiber reinforced automotive composite market include the high moisture uptake of this lignocellulosic material relative to glass and the weak inherent interface between natural fibers and automotive resins. This work seeks to improve the moisture uptake and resin interfacing properties of natural fibers through improved fundamental understanding of fiber physiochemical architecture and development of tailored fiber surface modification strategies.

09 BIOMASS FUELS↗

3D-Printable Silicone Materials with Hydrogen Getter Capability

Organic getters are used to reduce the amount of reactive hydrogen in applications such as nuclear plants and transuranic waste. Here, the present study examines the performance of getter loaded silicone elastomers in reducing reactive hydrogen gas from the gas phase and their capability of being 3D printed using direct ink writing techniques. The samples are placed in closed vessels and exposed to hydrogen atmosphere at pressures of 580 torr and 750 mtorr and at a temperature of 25 °C. The hydrogen consumption is measured as a function of time and normalized to getter concentration in the polymer. The performance of the getter-loaded silicone elastomer containing 1,4-bis[phenylethynyl]benzene (DEB) as the organic getter and Pd/C catalyst (ratio of 3:1 DEB to catalyst) decreases with increasing the resin's curing temperature. Chemical analysis suggests that DEB reacts with the silicone resin at high temperatures. In addition, it is demonstrated that the increased surface area of 3D printed composites results in improved getter performance.

36 MATERIALS SCIENCE↗

MXene Reinforced Thermosetting Composite for Lightning Strike Protection of Carbon Fiber Reinforced Polymer

Ti 3 C 2 – a member of the MXenes (2D transition metal carbides and nitrides) family, is investigated as an effective filler to improve the electrical, mechanical, and thermal properties of divinylbenzene (DVB) thermosetting resin. Consequently, its performance as a lightning strike protection (LSP) coating for carbon fiber reinforced polymer (CFRP) is evaluated. Polyaniline (PANI) – dodecylbenzene sulfonic acid (DBSA) complex is used to cure the DVB resin. The synergic effect of MXenes (with surface that is negatively charged) with polyaniline (positive charge) shows electrostatic bonding and improved electrical conductivity in the composite. We also find that the addition of MXenes at 2 wt% into the PANI-DVB composite shows ≈139%, 10%, and 9% improvement in electrical conductivity, flexural strength, and flexural modulus, respectively, compared to the neat PANI-DVB composite. The composites are investigated using various material characterization techniques including Fourier transforms infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. Furthermore, MXenes-DVB is utilized to create a conductive thermosetting coating on top of a CFRP substrate and tested against a lightning strike of 100 kA. CFRP with MXenes-DVB coating reduced the surface damage from 40.61 cm 2 (reference CFRP panel) to 13.29 cm 2 (CFRP coated with MXenes-DVB).

36 MATERIALS SCIENCE↗

Two–Photon Printing of Shape–Memory Microstructures and Metasurfaces via Radical–Mediated Thiol–Vinyl Hydrothiolation

Shape-memory resists capable of high-resolution curing into arbitrarily designed structures are increasingly demanded for soft robotics, optical sensors, microscale manufacturing, and biomedicine. Amorphous, shape-memory thiol-vinyl networks were printed using two-photon polymerization (2PP) curing of a simple resin formulated with commercially available reagents. The ability to print high-resolution feature sizes down to 200 nm is attributed to the use of radicalmediated, thiol-vinyl step-growth polymerization that quickly crosslinks the resin, limiting diffusive transport. The thermomechanical behavior of the 2PP-cured material analyzed in compression, tension and three-point bending is similar to the behavior of the UV-polymerized samples. To demonstrate the ability to design, field, and test 4D responsive microstructures, an array of nine springs with coil diameters of 330 μm was printed. Following compressive shapefixing, printed arrays can release 11 μJ of stored elastic strain energy when reheated. Further, a new concept of dichroic-memory of a metamaterial device is demonstrated by printing a twisted woodpile structure with circular dichroism as characterized by Mueller Matrix ellipsometry. Furthermore, our results demonstrate how combining high-resolution 2PP curing with stimuli-responsive molecular architectures can further the engineering of responsive microstructures and metamaterials.

36 MATERIALS SCIENCE↗

Mechanical Consequences of Oxygen Inhibition in Vat Polymerization

Vat polymerization is a type of additive manufacturing that is used extensively to produce micro-architected structures for mechanical applications, which brings the mechanical properties of photopolymerized resins into sharp focus. However, it is known that photopolymerization is sensitive to a number of factors, perhaps the most notorious of which is oxygen inhibition. Herein, the degree to which oxygen inhibition influences the macroscopic and microscopic properties of structures made using vat polymerization is explored. This work is motivated by an observation of lattices being >4 times softer in the experiment than predicted by simulation, which is hypothesized to be due to the material at the surface being incompletely cured. Furthermore, this hypothesis is supported by four-point bending tests in which flexural modulus is found to increase with beam thickness. Nanoindentation and bulk compression studies show that this surface softening is present for three distinct resins. Importantly, it is observed that structures post-print cured in nitrogen are stiffer than those post-print cured in air, however, regardless of the post-print curing environment, printing samples in the presence of oxygen makes them softer than samples photocured in nitrogen. Collectively, these results show the outsized influence of oxygen inhibition on micro-architected structures realized using vat polymerization.

36 MATERIALS SCIENCE↗

Latent Catalysis as a Platform for Accessing Diverse Material Properties in Vat Photopolymerization 3D Printing

Vat photopolymerization (VP) 3D printing is an attractive strategy to manufacture customized polymer parts. The properties of printed materials are limited by the need to employ a low viscosity liquid resin and achieve rapid polymerization kinetics. To circumvent this limitation, dual‐cure methods have been developed using reagents embedded in the liquid resin formulation; however, the reagent‐based approach requires the discovery and optimization of new chemistry for each desired material. Here, in this work, we demonstrate a catalytic, dual‐cure platform that enables access to both Nylon‐6 and polyester interpenetrating networks through VP 3D printing under a universal approach. Structure–reactivity relationships of the latent NHC catalysts led to the identification of a magnesium chloride–NHC adduct as a latent catalyst that is orthogonal to radical polymerization and can be unmasked at elevated temperatures post‐printing to initiate ring‐opening polymerization of lactones and lactams. This strategy results in access to semicrystalline materials, which are a challenging morphology to access via VP 3D printing, that have attractive mechanical properties and can be printed at high resolution. This work represents the first photochemical‐based 3D printing of Nylon‐based materials and demonstrates the value of catalytic approaches to access new material properties in VP 3D printing.

Colliver, Cali N. [University of North Carolina, C↗

Tuning the Mechanical Properties of Crosslinked Copolymers via Sequence and Solvent‐Selective Swelling for Vat Photopolymerization

Block copolymers (BCPs) offer distinct advantages for vat photopolymerization by enabling mechanically programmable network structures through microphase-separated morphologies that can be kinetically trapped during curing, yielding properties unattainable in homogeneous resins. However, the respective roles of repeat-unit sequence and solvent environment, together with their interplay in directing network formation and mechanical performance, remain unclear. Here, we synthesize a series of CO 2 -based polycarbonate copolymers comprising a crosslinkable glassy poly(vinyl cyclohexene carbonate) (PVCHC, A block) and a non-crosslinkable soft poly(propylene carbonate) (PPC, B block). The polymer sequence is systematically varied (ABA, BAB, and statistical), and solvent choice controls block-selective swelling to jointly control gelation behavior, microphase morphology, and mechanical response through changes in the accessibility and local environment of photocrosslinkable vinyl groups during network formation, as revealed by photorheology and small angle x-ray scattering. By tuning polymer sequence and curing solvent, we transform nominally identical formulations from brittle to highly ductile materials, achieving a three-orders-of-magnitude range in toughness (0.003 to 9.1 MJ m −3 ). These results establish clear structure–processing–property relationships and identify polymer sequence and selective solvation as powerful strategies for programming both printability and performance of block copolymer resins for additive manufacturing.

additive manufacturing↗

A New Triketone Ligand for Extraction of Lithium from Brines**

Recovery of lithium from brines by liquid-liquid solvent extraction (LLE) with diketones and synergistic co-ligands has been investigated for decades, but industrial application has been limited. In pursuit of a ligand with improved properties, a series of ketonamides with beta-carbonyl groups were designed, synthesized, and tested in extraction of lithium from sulfate and carbonate simulants of clay mineral tailing leachates. The best performing ligand, a novel tricarbonyl amide, was characterized for lithium extraction with and without four synergistic co-ligands. Further, the tricarbonyl amide combined with the synergistic co-ligand Cyanex-923 was absorbed on a resin support. The ligand-modified resin was tested for performance in extraction of dilute brine simulants and up to 60 % recovery of lithium was achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data Trend Shifts Induced by Method of Concentration for Trace Metals in Seawater: Automated Online Preconcentration vs Borohydride Reductive Coprecipitation of Nearshore Seawater Samples for Analysis of Ni, Cu, Zn, Cd, and Pb via ICP-MS

This research compares performance, reproducibility, and detection limits of ambient seawater analysis for trace metals using both borohydride reductive co-precipitation and an automated chelation column (seaFAST™ 2) co-preconcentration for matrix interferent elimination on total and dissolved grab samples in nearshore to marine waters, over a broad concentration range, prior to ICP-MS injection. A move to an online preconcentration method both minimizes sample preparation, and eliminates correction errors when accounting for trace impurities in precipitated samples, induced via reagents. The reproducability of the online preconcentration method described, coupled with low blanks and method detection limits (MDLs), demonstrates an effective move to an automated procedure using ethylenediaminetriacetic and iminodiacetate acid chelation exchange resin and multi-analyte determination via ICP-MS for total and dissolved Ni, Cu, Zn, Cd, and Pb in marine water samples. Average CASS-5 recoveries using the online preconcentration method (n=9) were 109±7%, 104±5%, 103±7%, 101±3%, and 86±8% respectively. The MDLs obtained from the automated method for Ni, Cu, Zn, Cd and Pb were 3.3, 1.8, 13.5, 4, and 10 times lower, respectively, than for the Borohydride method. There were statistically significant differences between the methods for CASS-5 recoveries of Ni, Cu, Zn (p < 0.0001), and Pb (p = 0.0024). Comparison of methods gave high concordance (rC = 0.90) between methods for total and dissolved Ni, Cu, Zn, and Pb, and total Cd.

seaFAST, borohydride, seawater, Ethylenediaminetet↗

Toward Standardized Microscale Tensile Testing for Two‐Photon Polymerization‐Fabricated Materials in Liquid

Two-photon polymerization (TPP) enables the fabrication of intricate 3D microstructures with submicron precision, offering significant potential in biomedical applications like tissue engineering. In such applications, to print materials and structures with defined mechanics, it is crucial to understand how TPP printing parameters impact the material properties in a physiologically relevant liquid environment. Herein, an experimental approach utilizing microscale tensile testing (μTT) for the systematic measurement of TPP-fabricated microfibers submerged in liquid as a function of printing parameters is introduced. Using a diurethane dimethacrylate-based resin, the influence of printing parameters on microfiber geometry is first explored, demonstrating cross-sectional areas ranging from 1 to 36 μm 2 . Tensile testing reveals Young's moduli between 0.5 and 1.5 GPa and yield strengths from 10 to 60 MPa. The experimental data show an excellent fit with the Ogden hyperelastic polymer model, which enables a detailed analysis of how variations in writing speed, laser power, and printing path influence the mechanical properties of TPP microfibers. The μTT method is also showcased for evaluating multiple commercial resins and for performing cyclic loading experiments. Collectively, this study builds a foundation toward a standardized microscale tensile testing framework to characterize the mechanical properties of TPP printed structures.

mechanical characterization↗

Root Cause Analysis of Gastroduodenal Ulceration After Yttrium-90 Radioembolization

Introduction: A root cause analysis was performed on the occurrence of gastroduodenal ulceration after hepatic radioembolization (RE). We aimed to identify the risk factors in the treated population and to determine the specific mechanism of nontarget RE in individual cases. Methods: The records of 247 consecutive patients treated with yttrium-90 RE for primary (n = 90) or metastatic (n = 157) liver cancer using either resin (n = 181) or glass (n = 66) microspheres were reviewed. All patients who developed a biopsy-proven microsphere-induced gastroduodenal ulcer were identified. Univariate and multivariate analyses were performed on baseline parameters and procedural data to determine possible risk factors in the total population. Individual cases were analyzed to ascertain the specific cause, including identification of the culprit vessel(s) leading to extrahepatic deposition of the microspheres. Results: Eight patients (3.2 %) developed a gastroduodenal ulcer. Stasis during injection was the strongest independent risk factor (p = 0.004), followed by distal origin of the gastroduodenal artery (p = 0.004), young age (p = 0.040), and proximal injection of the microspheres (p = 0.043). Prolonged administrations, pain during administration, whole liver treatment, and use of resin microspheres also showed interrelated trends in multivariate analysis. Retrospective review of intraprocedural and postprocedural imaging showed a probable or possible culprit vessel, each a tiny complex collateral vessel, in seven patients. Conclusion: Proximal administrations and those resulting in stasis of flow presented increased risk for gastroduodenal ulceration. Patients who had undergone bevacizumab therapy were at high risk for developing stasis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Y90-Radioembolization of Lung Metastases via the Bronchial Artery: A Report of 2 Cases

We report successful Y90-radioembolization of the lung applying Y90-resin microspheres via the bronchial artery in two patients with diffuse colorectal and renal cancer metastases, respectively. The deposition of radioactive Y90-resin-microspheres was technically feasible and resulted in a reasonable absorbed dose in the tumors. However, open questions remain regarding dosimetry and safe dose exposure to the lung. The technique warrants thorough investigation before clinical use. A Phase I trial to evaluate safety and preliminary efficacy is under preparation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Seasonal changes in soil respiration linked to soil moisture and phosphorus availability along a tropical rainfall gradient

Humid tropical forests contain some of the largest soil carbon (C) stocks on Earth, yet there is uncertainty about how carbon dioxide (CO 2 ) fluxes will respond to climate change in this biome. The magnitude of change in soil respiration over seasonal wetting and drying cycles can provide insight to how CO 2 fluxes might respond to precipitation changes. We measured soil respiration in 15 distinct forests across rainfall and soil fertility gradients in lowland Panama to assess spatial variation in seasonal patterns. We predicted that seasonal changes in soil respiration would be related to soil moisture, and that the ratio of wet to dry season CO 2 fluxes across landscape gradients would be regulated by soil organic C and nutrient availability. We found that soil respiration during the dry season was relatively stable across the rainfall gradient, averaging 4.3 ± 0.3 lmol CO 2 m -2 s -1 . In contrast, wet season respiration varied markedly, ranging among sites from a decline of 19% to an increase of 360% in comparison to dry season values. Soil moisture, air temperature, and rainfall were the best predictors of instantaneous soil respiration (R 2 = 0.18). Meanwhile, ratios of wet to dry season CO 2 fluxes were best predicted by sitescale resin-extractable phosphorus (P; R 2 = 0.48). That is, soil respiration in P-rich sites increased more during the wet season relative to respiration in P-poor sites. Also, sites with Wet:Dry season CO 2 flux ratios\1 were all poor in soil P, defined as resin P concentrations < 2 mg P kg -1 . Although soil organic C was not related to instantaneous soil respiration rates, forest floor biomass accumulation during the dry season was positively correlated with soil respiration during the wet season (R 2 = 0.26), indicating the contribution of microbial decomposition to wet season soil respiration. Altogether, nutrient availability regulated soil respiration responses to increased moisture during the wet season, while low soil moisture uniformly suppressed soil respiration across sites during the dry season. Phosphorus availability might therefore regulate feedbacks to climate change among humid tropical forests.

54 ENVIRONMENTAL SCIENCES↗

The Median Isn’t the Message: soil nutrient hot spots have a disproportionate influence on biogeochemical structure across years, seasons, and depths

Abstract Soil nutrient distribution is heterogeneous in space and time, potentially altering nutrient acquisition by trees and microorganisms. Ecologists have distinguished “hot spots” (HSs) as areas with enhanced and sustained rates of nutrient fluxes relative to the surrounding soil matrix. We evaluated the spatial and temporal patterns in nutrient flux HSs in two mixed-conifer forest soils by repeatedly sampling the soil solution at the same spatial locations (horizontally and vertically) over multiple seasons and years using ion exchange resins incubated in situ. The climate of these forests is Mediterranean, with intense fall rains occurring following summers with little precipitation, and highly variable winter snowfall. Hot spots formed most often for NO 3 − and Na + . Although nutrient HSs often occurred in the same spatial location multiple times, HSs persisted more often for PO 4 3− NH 4 + , and NO 3 − , and were more transient for Ca 2+ , Mg 2+ , and Na + . Sampling year (annual precipitation ranged from 558 to 1223 mm) impacted the occurrence of HSs for most nutrients, but season was only significant for PO 4 3− , NH 4 + , NO 3 − , and Na + , with HSs forming more often after fall rains than after spring snowmelt. The frequency of HSs significantly decreased with soil depth for all nutrients, forming most commonly immediately below the surficial organic horizon. Although HSs accounted for less than 17% of the sampling volume, they were responsible for 56–88% of PO 4 3− , NH 4 + , and NO 3 − resin fluxes. Our results suggest that macronutrient HSs have a disproportional contribution to soil biogeochemical structure, with implications for vegetation nutrient acquisition strategies and biogeochemical models. Graphical abstract

54 ENVIRONMENTAL SCIENCES↗

X-ray methods to observe and quantify adhesive penetration into wood

To accelerate the development of new and improved wood adhesives for engineered wood products, the optimal penetration of adhesives into wood needs to be determined. Adhesive penetration includes both the flow of adhesives into wood micron-scale voids and the infiltration into the polymer components of the wood cell wall layers. In this work, X-ray computed tomography (XCT) and X-ray fluorescence microscopy (XFM) were used to study adhesive flow and infiltration. Model wood-adhesive bondlines were made using loblolly pine ( Pinus taeda ) latewood substrates and bromine-substituted phenol formaldehyde (BrPF) resins with different weight average molecular weight (M W ). The Br substitution facilitated both qualitative and quantitative observations using XCT and XFM. The BrPF resin flow into wood was visualized using XCT volume reconstructions and quantified by calculating the weighted penetration (WP). Examination of the shape of the cured BrPF-air interface in longitudinal tracheid lumina revealed that capillary played a role in the majority of BrPF flow into lumina. XFM mapping revealed the pathways of BrPF infiltration into the wood cell walls, and the results were used to calculate BrPF cell wall weight percent gain (WPG CW ) in individual wood cell wall layers. Both WP and WPG CW decreased with increasing BrPF M W . Also, the middle lamella had higher WPG CW than its neighboring secondary cell walls, and within a given bondline the WPG CW decreased with increasing distance of the cell from the bondline. Along these lines, the results provide new insights that are needed in the development of improved models to understand and predict wood adhesive bondline performance.

36 MATERIALS SCIENCE↗