Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Low-energy D{sup +} and H{sup +} ion irradiation effects on highly oriented pyrolytic graphite

We have investigated the low-energy (100 eV) D{sup +} and H{sup +} ion irradiation effects on the structural and chemical properties of highly oriented pyrolytic graphite (HOPG). Structural disorder due to the ion irradiation was identified by the Raman spectroscopy, the D{sup +} irradiation giving rise to greater structural disorder than the H{sup +} irradiation. Only sp{sup 2} bonding was identified in the X-ray photoemission spectroscopy of the D{sup +}-irradiated HOPG, indicating no change in the surface chemical structure. The H{sup +} irradiation, on the other hand, gave rise to sp{sup 3} bonding and π−π{sup *} transition, the sp{sup 3} bonding increasing with increasing irradiation dose. It is thus shown that the chemical properties of the HOPG surface may be sensitively modified by the low-energy H{sup +} ion irradiation, but not by the low-energy D{sup +} ion irradiation.

36 MATERIALS SCIENCE↗

Electron spin-lattice relaxation of low-symmetry Ni{sup 2+} centers in LiF

The spin-lattice relaxation times of charge-compensated Ni{sup 2+} centers in LiF single crystals were measured using the electron spin echo technique. An analysis of the results revealed a very high relaxation rate with a linear dependence on temperature within the intermediate temperature range of 5–15 K. This acceleration of the relaxation rate was found to be due to the inhomogeneous distribution of Ni{sup 2+} ions in the LiF lattice. It seems that the effective cross-relaxation mechanism through the exchange-coupled clusters of Ni{sup 2+} ions can play a dominant role. Two-phonon Raman type relaxation dominates at higher temperatures involving the Debye phonon spectrum of the LiF lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of surface defect states in CeO{sub 2-y} nanocrystals by Scanning−tunneling microscopy/spectroscopy and ellipsometry

Synthesis process strongly influences the nanocrystalline CeO{sub 2-y} defective structure. The presence of surface defects, in the form of oxygen vacancies in different charge states (F centers), can change the electronic properties of ceria nanocrystals. Nanocrystalline CeO{sub 2-y} samples were synthesized using three different methods (precipitation, self-propagating room temperature, and hydrothermal synthesis). Raman spectroscopy was used to identify the presence of oxygen vacancies which presumably were formed at the nanoparticle surface. The defect concentration depended on the crystallite size of differently prepared CeO{sub 2-y} samples. Scanning tunneling microscopy/spectroscopy and ellipsometry were employed to investigate the electronic band structure of defective CeO{sub 2-y} nanocrystals. Scanning tunneling spectroscopy measurements demonstrated that inside the band gap of CeO{sub 2-y} nanocrystals, besides the filled 4 f states, appeared additional states which were related to occupied and empty F center defect states. From the ellipsometric measurements, using the critical points model, the energy positions of different F centers states and the values of the reduced band gap energies were determined. The analysis of obtained data pointed out that depending on the synthesis method, different types of F centers (F{sup +} and F{sup 0}) can be formed in the CeO{sub 2-y} nanocrystals. The formation of different F center defect states inside the ceria gap have a strong impact on the electrical, optical, and magnetic properties of ceria nanocrystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of three-dimensional structures prepared by Ge dewetting from Si(111) at high temperatures

The formation of three-dimensional (3D) structures during Ge deposition on Si(111) at about 800 °C is studied with scanning tunneling, Kelvin probe and electron microscopies, and scanning tunneling and Raman spectroscopies. The observed surface morphology is formed by dewetting of Ge from Si(111), since it occurs mainly by means of minimization of surface and interfacial energies. The dewetting proceeds through massive Si eroding around growing 3D structures, providing them to be composed of SiGe with about a 30% Ge content, and leads to the significant reduction of the SiGe/Si interface area. It is found that the SiGe top component of 3D structures forms sharp interfaces with the underlying Si. The minimization of interfacial and strain energies occurs on the way that the 3D structures appear to get the dendrite-like shape. The Ge distribution in the 3D SiGe structures is inhomogeneous in the lateral dimension with a higher Ge concentration in their central areas and Ge segregation on their surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Parallel hybrid textures of lepton mass matrices

We analyze the parallel hybrid texture structures in the charged lepton and the neutrino sector. These parallel hybrid texture structures have physical implications as they cannot be obtained from arbitrary lepton mass matrices through weak basis transformations. The total 60 parallel hybrid texture structures can be grouped into 12 classes, and all the hybrid textures in the same class have identical physical implications. We examine all 12 classes under the assumption of nonfactorizable phases in the neutrino mass matrix. Five out of the total 12 classes are found to be phenomenologically disallowed. We study the phenomenological implications of the allowed classes for 1-3 mixing angle, Majorana and Dirac-type CP violating phases. Interesting constraints on effective Majorana mass are obtained for all the allowed classes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Three-Dimensional Design Simulations of a High-Energy Density Reshock Experiment at the National Ignition Facility

We present here simulations of a new experimental platform at the National Ignition Facility (NIF) for studying the hydrodynamic instability growth of a high-energy density (HED) fluid interface that undergoes multiple shocks, i.e., is “reshocked.” In these experiments, indirect-drive laser cavities drive strong shocks through an initially solid, planar interface between a high-density plastic and low-density foam, in either one or both directions. The first shock turns the system into an unstable fluid interface with the premachined initial condition that then grows via the Richtmyer–Meshkov and Rayleigh–Taylor instabilities. Backlit X-ray imaging is used to visualize the instability growth at different times. Our main result is that this new HED reshock platform is established and that the initial data confirm the experiment operates in a hydrodynamic regime similar to what simulations predict. The simulations also reveal new types of edge effects that can disturb the experiment at late times and suggest ways to mitigate them.

42 ENGINEERING↗

Novel Pt/Mg(In)(Al)O catalysts for ethane and propane dehydrogenation

Catalysts for the dehydrogenation of light alkanes were prepared by dispersing Pt on the surface of a calcined hydrotalcite-like support containing indium, Mg(In)(Al)O. Upon reduction in H{sub 2} at temperatures above 673 K, bimetallic particles of PtIn are observed by TEM, which have an average diameter of 1 nm. Analysis of Pt LIII-edge extended X-ray absorption fine structure (EXAFS) data shows that the In content of the bimetallic particles increases with increasing bulk In/Pt ratio and reduction temperature. Pt LIII-edge X-ray absorption near edge structure (XANES) indicates that an increasing donation of electronic charge from In to Pt occurs with increasing In content in the PtIn particles. The activity and selectivity of the Pt/Mg(In)(Al)O catalysts for ethane and propane dehydrogenation reactions are strongly dependent on the bulk In/Pt ratio. For both reactants, maximum activity was achieved for a bulk In/Pt ratio of 0.48, and at this In/Pt ratio, the selectivity to alkene was nearly 100%. Coke deposition was observed after catalyst use for either ethane or propane dehydrogenation, and it was observed that the alloying of Pt with In greatly reduced the amount of coke deposited. Characterization of the deposit by Raman spectroscopy indicates that the coke is present as highly disordered graphite particles <30 nm in diameter. While the amount of coke deposited during ethane and propane dehydrogenation are comparable, the effects on activity are dependent on reactant composition. Coke deposition had no effect on ethane dehydrogenation activity, but caused a loss in propane dehydrogenation activity. This difference is attributed to the greater ease with which coke produced on the surface of PtIn nanoparticles migrates to the support during ethane dehydrogenation versus propane dehydrogenation.

01 COAL, LIGNITE, AND PEAT↗

Systematic Influence of Electronic Modification of Ligands on the Catalytic Rate of Water Oxidation by a Single-Site Ru-Based Catalyst

Catalytic water oxidation is an important process for the development of clean energy solutions and energy storage. Despite the significant number of reports on active catalysts, systematic control of the catalytic activity remains elusive. In this study, descriptors are explored that can be correlated with catalytic activity. [Ru(tpy)(pic) 2 (H 2 O)](NO 3 ) 2 and [Ru(EtO-tpy)(pic) 2 (H 2 O)](NO 3 ) 2 (where tpy=2,2': 6',2“-terpyridine, EtO-tpy=4'-(ethoxy)-2,':6',2”-terpyridine, pic=4-picoline) are synthesized and characterized by NMR, UV/Vis, EPR, resonance Raman, and X-ray absorption spectroscopy, and electrochemical analysis. Addition of the ethoxy group increases the catalytic activity in chemically driven and photocatalytic water oxidation. Thus, the effect of the electron-donating group known for the [Ru(tpy)(bpy)(H 2 O)] 2+ family is transferable to architectures with a tpy ligand trans to the Ru-oxo unit. Under catalytic conditions, [Ru(EtO-tpy)(pic) 2 (H 2 O)](NO 3 ) 2 displays new spectroscopic signals tentatively assigned to a peroxo intermediate. In conclusion, reaction pathways were analyzed by using DFT calculations. [Ru(EtO-tpy)(pic) 2 (H 2 O)](NO 3 ) 2 is found to be one of the most active catalysts functioning by a water nucleophilic attack mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical generation of free charge carriers in thin films of tin oxide

The methods of infrared absorption spectroscopy and Raman spectroscopy are used to study nanocrystalline SnO{sub x} films (1 {<=} x {<=} 2) prepared by thermal oxidation of metallic tin layers. A monotonic decrease in the transmittance of films in the infrared region has been observed as a result of exposure of the films to light with the wavelength of 380 nm at room temperature. The effect is at a maximum for the samples with x Almost-Equal-To 2 and is observed for {approx}10 min after switching off of illumination. The mentioned variations in optical properties, similarly to those observed in the case of heating of the samples in the dark, are accounted for by an increase in the concentration of free charge carriers (electrons) in nanocrystals of tin dioxide. The data of infrared spectroscopy and the Drude model are used to calculate the concentrations of photogenerated charge carriers ({approx}10{sup 19} cm{sup -3}); variations in these concentrations in the course of illumination and after switching off of illumination are determined. Mechanisms of observed photogeneration of charge carriers in SnO{sub x} films and possible applications of this effect to gas sensors are discussed.

36 MATERIALS SCIENCE↗

Enhancement of photoelectric catalytic activity of TiO{sub 2} film via Polyaniline hybridization

A Polyaniline (PANI)/TiO{sub 2} film coated on titanium foil was successfully prepared using the sol-gel method followed by a facile chemisorption. Compared with pristine TiO{sub 2}, the photocatalytic (PC) and photoelectrocatalytic (PEC) degradation rates of 2,4-dichlorophenol (2,4-DCP) with the PANI/TiO{sub 2} film were enhanced by 22.2% and 57.5%, respectively. 2,4-DCP can be mineralized more effectively in the presence of PANI/TiO{sub 2} film. The best PEC degradation efficiency of 2,4-DCP with the PANI/TiO{sub 2} film was acquired at an external potential of 1.5 V with a layer of 1 nm thick PANI. The PANI/TiO{sub 2} film was characterized by Raman spectra, Fourier transform infrared spectra (FT-IR), Auger electron spectroscopy (AES), and electrochemical analysis. These results indicated that there was a chemical interaction on the interface of PANI and TiO{sub 2}. This interaction may be of significance to promote the migration efficiency of carriers and induce a synergetic effect to enhance the PC and PEC activities. - Graphical abstract: The effect of PANI content on 2,4-DCP degradation with initial concentration of 50 mg/L, external potential=1.5 V. Inset: degradation rate constants of various PANI/TiO{sub 2} films. Highlights: > Polyaniline/TiO{sub 2} film was prepared using the sol-gel method followed by chemisorption. > Photoelectrocatalytic degradation rate of 2,4-dichlorophenol was enhanced by 57.5%. > The modification of Polyaniline to TiO{sub 2} film caused a rapid charge separation. > Best degradation efficiency was acquired at 1.5 V with 1 nm thick PANI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Annealing studies of heteroepitaxial InSbN on GaAs grown by molecular beam epitaxy for long-wavelength infrared detectors

We report the effect of annealing on the structural, vibrational, electrical, and optical properties of heteropepitaxially grown InSbN epilayers on GaAs substrate by molecular beam epitaxy for long-wavelength infrared detector applications. As-grown epilayers exhibited high N incorporation in the both substitutional and interstitial sites, with N induced defects as evidenced from high resolution x-ray diffraction, secondary ion mass spectroscopy, and room temperature (RT) micro-Raman studies. The as-grown optical band gap was observed at 0.132 eV ({approx}9.4 {mu}m) and the epilayer exhibited high background carrier concentration at {approx}10{sup 18} cm{sup -3} range with corresponding mobility of {approx}10{sup 3} cm{sup 2}/Vs. Ex situ and in situ annealing at 430 Degree-Sign C though led to the loss of N but improved InSb quality due to effective annihilation of N related defects and other lattice defects attested to enhanced InSb LO phonon modes in the corresponding Raman spectra. Further, annealing resulted in the optical absorption edge red shifting to 0.12 eV ({approx}10.3 {mu}m) and the layers were characterized by reduced background carrier concentration in the {approx}10{sup 16} cm{sup -3} range with enhanced mobility in {approx}10{sup 4} cm{sup 2}/Vs range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial thermal conductance between few to tens of layered-MoS 2 and c-Si: Effect of MoS 2 thickness

We report a systematic investigation of interfacial thermal conductance (G k ) between few to tens -layered mechanical exfoliated molybdenum disulfide (MoS 2 ) and crystalline silicon (c-Si). Based on Raman spectroscopy, we find G k at room temperature increases with increased layer numbers of MoS 2 from 0.974 MW m -2 K -1 to 68.6 MW m -2 K -1 . The higher G k of thicker samples reveals their better interface contact with the substrate, leading to accordingly improved interfacial energy coupling. Molecular dynamics (MD) simulations are conducted to interpret and compare with the experimental observations. MD simulations predict a thermal conductance in the range of 53–77 MW m -2 K -1 , which agrees well with the upper bound G k measured in our work. The thickness dependence of measured G k reflects the improved interface spacing for thicker MoS 2 samples. This phenomenon is further confirmed by the Raman intensity enhancement study by the interface spacing and local optical interference calculations.

36 MATERIALS SCIENCE↗

Possibility of High Phosphorus Pig Iron as Sacrificial Anode

Cathodic protection is an effective method to control the corrosion of underground pipelines and submerged structures. In the present work, high phosphorus containing pig iron was utilized as sacrificial anode for cathodic protection of underground mild steel plates and the results were compared with that of a commercially pure magnesium sacrificial anode. Driving potential and current between the galvanically coupled sacrificial anodes and mild steel plates were continuously monitored in real time for one month. Microstructure and morphology of the corrosion products formed on the surface of pig iron, magnesium sacrificial anodes and mild steel plates were observed with the help of optical microscope and scanning electron microscopy, and phase identification were performed using x-ray diffraction, Raman spectroscopy and Fourier transform infrared spectroscopy. The distribution of phosphorus in the pig iron matrix and soluble rust formation on the surface of pig iron under buried condition were critical from the point of sacrificial effect, indicating the possible scientific reasons for high phosphorous pig iron to be used as sacrificial anode.

36 MATERIALS SCIENCE↗

Label-free single-vesicle based surface enhanced Raman spectroscopy: A robust approach for investigating the biomolecular composition of small extracellular vesicles

Small extracellular vesicles (sEVs) are cell-released vesicles ranging from 30-150nm in size. They have garnered increasing attention because of their potential for both the diagnosis and treatment of disease. The diversity of sEVs derives from their biological composition and cargo content. Currently, the isolation of sEV subpopulations is primarily based on bio-physical and affinity-based approaches. Since a standardized definition for sEV subpopulations is yet to be fully established, it is important to further investigate the correlation between the biomolecular composition of sEVs and their physical properties. In this study, we employed a platform combining single-vesicle surface-enhanced Raman spectroscopy (SERS) and machine learning to examine individual sEVs isolated by size-exclusion chromatography (SEC). The biomolecular composition of each vesicle examined was reflected by its corresponding SERS spectral features (biomolecular “fingerprints”), with their roots in the composition of their collective Raman-active bonds. Origins of the SERS spectral features were validated through a comparative analysis between SERS and mass spectrometry (MS). SERS fingerprinting of individual vesicles was effective in overcoming the challenges posed by EV population averaging, allowing for the possibility of analyzing the variations in biomolecular composition between the vesicles of similar and/or different sizes. Using this approach, we uncovered that each of the size-based fractions of sEVs contained particles with predominantly similar SERS spectral features. Indeed, more than 84% of the vesicles residing within a particular group were clearly distinguishable from that of the other EV sub-populations, despite some spectral variations within each sub-population. Our results suggest the possibility that size-based EV fractionation methods produce samples where similarly eluted sEVs are correlated with their respective biochemical contents, as reflected by their SERS spectra. Our findings therefore highlight the possibility that the biogenesis and respective biological functionalities of the various sEV fractions may be inherently different.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Substrate dielectric effects on graphene field effect transistors

Graphene is emerging as a promising material for future electronics and optoelectronics applications due to its unique electronic structure. Understanding the graphene-dielectric interaction is of vital importance for the development of graphene field effect transistors (FETs) and other novel graphene devices. Here, we extend the exploration of substrate dielectrics from conventionally used thermally grown SiO{sub 2} and hexagonal boron nitride films to technologically relevant deposited dielectrics used in semiconductor industry. A systematic analysis of morphology and optical and electrical properties was performed to study the effects of different substrates (SiO{sub 2}, HfO{sub 2}, Al{sub 2}O{sub 3}, tetraethyl orthosilicate (TEOS)-oxide, and Si{sub 3}N{sub 4}) on the carrier transport of chemical vapor deposition-derived graphene FET devices. As baseline, we use graphene FETs fabricated on thermal SiO{sub 2} with a relatively high carrier mobility of 10 000 cm{sup 2}/(V s). Among the deposited dielectrics studied, silicon nitride showed the highest mobility, comparable to the properties of graphene fabricated on thermal SiO{sub 2}. We conclude that this result comes from lower long range scattering and short range scattering rates in the nitride compared those in the other deposited films. The carrier fluctuation caused by substrates, however, seems to be the main contributing factor for mobility degradation, as a universal mobility-disorder density product is observed for all the dielectrics examined. The extrinsic doping trend is further confirmed by Raman spectra. We also provide, for the first time, correlation between the intensity ratio of G peak and 2D peak in the Raman spectra to the carrier mobility of graphene for different substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Frictionless knowledge injection for few-shot learning

Cutting-edge machine learning methods often require large volumes of curated training data, precluding their use in national security problems with rare events in massive datasets. We present a method for incorporating abstract knowledge into models tailored for sparse data. A subject matter expert defines salient concepts using data examples, which are encoded in the model’s embedding space. Models are then trained to respect these concepts. This method enables knowledge injection, yielding effective models with limited labeled data and the ability to assess model sensitivity for subject matter expertise across the nonproliferation mission space, as demonstrated with Raman spectra analysis.

Stomps, Jordan [ORNL] (ORCID:0000000178114479)↗

A highly oxygen reduction reaction active and CO 2 durable high-entropy cathode for solid oxide fuel cells

One big obstacle for the oxygen reduction reaction (ORR) electrode in solid oxide fuel cells (SOFCs) is the poor reaction activity and fast degradations caused by CO 2 poisoning. Here, in this study, we report our design of an active A-site Ca-rich high-entropy Pr 0.1875 Ba 0.1875 Sr 0.1875 La 0.1875 Ca 0.25 CoO 3-δ (PBSLC 25 C) electrode, guided by the O p-band theory. Here, when applied as a cathode in solid oxide fuel cells (SOFCs), it demonstrates high ORR activity and excellent CO 2 tolerance under realistic operating conditions. Ni-YSZ-based anode-supported cells with PBSLC 25 C cathodes demonstrate excellent peak power densities of 1.14 W cm -2 , 1.04 W cm -2 , and 0.77 W cm -2 in the air with 1%, 5%, and 10% CO 2 , respectively, at 750 °C. The engineered high-entropy PBSLC 25 C effectively diminishes the CO 2 poisoning effect and maintains active surfaces for fast oxygen exchange, as confirmed by the cell durability test in air containing CO 2 (5 and 10 vol%), Raman spectroscopy, and density functional theory calculations.

30 DIRECT ENERGY CONVERSION↗