Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pu”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Raman spectroscopy coupled with ambient ionization mass spectrometry: A forensic laboratory investigation into rapid and simple dual instrumental analysis techniques

We present a laboratory experiment, developed around a pair of instrumental analysis techniques, Raman spectroscopy and ambient ionization mass spectrometry (MS), conducted by senior chemistry undergraduate students for bulk analysis of over-the-counter drugs using benchtop versions of the two instruments, as well as trace analysis of illicit drugs utilizing the corresponding portable instruments. The identification and confirmation of seized drugs is a routine operation in forensic laboratories that can be simplified using these two instrumental techniques in tandem. Bulk samples are readily analyzed using conventional Raman spectroscopy followed by paper cone spray ionization (PCSI) MS, while trace analysis is allowed by a simple single-substrate dual-analyzer method using surface enhanced Raman spectroscopy (SERS) from paper followed by paper spray ionization (PSI) MS. The introduction of these novel strategies to the students exposed them to potential career paths in forensic science by means of a hands-on experience that provided fundamental knowledge about this set of analytical methods, including intercomparisons of their performance, as well as practical issues like costs, regulations and databases. The use of portable instrumentation represents an additional learning experience for the students, considering that it is cutting-edge technology that is just now being transferred from academic to industrial labs and that it allows a valuable discussion of the advantages and disadvantages of bringing the laboratory to the field.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

The effect of lignin degradation products on the generation of pseudo-lignin during dilute acid pretreatment

Pseudo-lignin is an insoluble material that tends to deposit on acidic pretreated fiber surface and negatively impacts the biological conversion of biomass to valued added products. Employing a laboratory generated acidic hydrolysate solution from dilute acid pretreatment of bamboo residues, we sought to seek an improved understanding of pseudo-lignin formation from fragmented carbohydrates. In addition, we also performed experiments to investigate how lignin model compounds interact with carbohydrates en route to pseudo-lignin’s formation. The yields of pseudo-lignin generated from xylose (CXPL) were higher than those generated from glucose (CGPL). Gas chromatography-Mass spectrometry and Foloin-Ciocalteau analysis suggested that there were more aromatic compounds in hydrolyzate during CGPL’s formation. The presence of lignin phenolic model compounds had both a positive and negative effect upon quantitative yields of pseudo-lignin. Gel permeation chromatography and NMR analysis ( 31 P and 2D-HSQC NMR) of the pseudo-lignin samples generated in the presence and absence of 4-hydroxybenzoic acid (4-HA), employed as a lignin model compound, revealed drastic differences in molecular weight, changes in hydroxyl group content, and hydrocarbon bonds, suggesting significant differences in the pseudo-lignin reaction pathways when certain lignin model compounds are present. Finally, our findings demonstrate the effects of both hemicellulose carbohydrate makeup and lignin model compound impact on the formation of pseudo-lignin and its chemical properties, suggesting a potential way to minimize pseudo-lignin formation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Influence of chain length in protic ionic liquids on physicochemical and structural features of lignins from sugarcane bagasse

We report the mechanisms behind lignin dissolution with protic ionic liquids (PILs) and their influence over lignin properties remain not fully explored. In this work, physicochemical and structural features of lignins extracted from sugarcane bagasse after pretreatment with a series of PILs (length of the cation chain combined with different anions) were assessed using analytical techniques. It was found that the lignin extracted with shorter chain length cations PILs showed the highest β-O-4 content. Opposite, the increase of the PILs cation chain length resulted in enhanced depolymerization. All lignins presented high polydispersity (>3.7), while the weight average molecular ranged from 1921 to 13,539 g/mol. The recovered [Eti][Mal] lignin presented the higher β-O-4 content and was possibly the most preserved lignin obtained. Opposite, lignin isolated from [Hex][Ac] and [Hex][For] treatments had less β-O-4 linkages attributed to the depolymerization of lignin via rupture of ether linkages generating intermediates that further repolymerized and/or depolymerized. These results suggest that the ionicity of the PIL is a crucial factor for lignin dissolution. Furthermore, these results illustrate that the proposed pretreatment using different PILs is useful to obtain high-quality lignins with distinct features and opens a new perspective for materials to match various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The physiochemical alteration of flax fibers structuring components after different scouring and bleaching treatments

Scouring and bleaching are essential steps in flax yarn production; however, in many cases, these treatments have relatively low selectivity on non-cellulosic polysaccharides (NCPs) and lignin. Herein, the specific chemical properties of flax fibers through a variety of scouring and/or bleaching procedures are reviewed to understand their correlations with the mechanical and morphological characteristics. The hydrolysis behaviors of hemicellulose and lignin are different from those of cellulose during chlorine-alkali-oxygen (Cl-AO), enzyme-alkali-oxygen (EAO), and alkali-oxygen (AO) treatments, while the structural hemicellulose polysaccharides fractions were not affected by acid pretreatment followed by alkali scouring (AA) treatment. It was found that the unbleached AA treatment improved scouring efficiency to the greatest extent by decreasing 73.3 % of hemicellulose content and 59.8 % of lignin content compared to the untreated flax fibers and obtained the highest tensile strength (6.58 cN/dtex) and elongation (3.73 %). Delignification was more crucial on fiber tenacity and fineness than hemicellulose removal (R 2 = 0.71, 0.79 vs R 2 = 0.46, 0.61). Within the hemicellulose fractions, a corresponding beneficial relationship between the xylan (XYL) composition and flax fiber properties is presented. The correlation of GM and GGM contents in hemicellulose with flax fiber length was significant with R 2 value 0.97 and 0.99, respectively. This work provides insight into the hydrolysis behavior of hemicellulose and a basis for developing scouring and/or bleaching models that can predict fiber properties.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Beneficial effect of surfactant in adsorption/desorption of lignocellulose-degrading enzymes on/from lignin with different structure

Nonionic surfactant Tween 80 is effective in alleviating the adsorption of lignocellulose-degrading enzymes onto lignin. However, the impacts of lignin structural characteristics on this mitigation effect of Tween 80 were still not clear. Herein, effects of Tween 80 on cellulase and xylanase adsorption on different enzymatic residual lignins (ERLs) and poplar samples were investigated. Besides, effects of Tween 80 on desorption of the two enzyme preparations from different ERLs and poplar samples were also evaluated. By adding Tween 80, the inhibition of ERLs to cellulase hydrolysis was offset and the positive role of Tween 80 in Avicel hydrolysis with presence of ERLs was more effective. Binding strength of cellulase with ERLs was alleviated from 236.0 – 410.9 to 43.9 – 116.6 mL/g after adding 0.5 mg/mL Tween 80. When ERLs was more hydrophobic and had more condensed phenolic OH, the alleviation effect of Tween 80 on cellulase adsorption on ERLs was intensified but its positive effect on enhancing cellulase desorption was weakened. Tween 80 was effective in increasing xylanase activity and preventing xylanase deactivation. Further, with the increase of lignin content and phenolic OH in pretreated poplar, the effect of Tween 80 in alleviating xylanase adsorption on poplar samples was intensified but the effect in enhancing xylanase desorption from poplar samples was weakened. The results provided distinct findings to understand the interaction between Tween 80 and cellulase/xylanase in enzymatic saccharification of lignocelluloses.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Green synthesis of cellulose formate and its efficient conversion into 5-hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) production from cellulose is a hot topic, while the rigidity of cellulose limits its efficient conversion into HMF. Cellulose formate has exhibited the great potential for HMF production but it’s synthesis via direct formylation of cellulose in formic acid is difficult. We reported a green synthetic route of cellulose formate and its efficient conversion into HMF. Ball milled cellulose formate (BCF) was synthesized via ball milling followed by formylation in formic acid at 80 °C for 0.5 h. The structure of BCF was thoroughly characterized and BCF was subsequently converted to HMF catalyzed by AlCl3 and HCl in dimethyl sulfoxide (DMSO)-H 2 O media. Results showed that ball milling of cellulose for 1–1.5 h efficiently deconstructed its crystallinity and degree of polymerization, boosting its further formylation and catalytic conversion. An overall 66.9% HMF yield from cellulose was achieved at 150 °C for 20 min using BCF derived from cellulose ball milled for 1.5 h as the substrate. BCF exhibits high reactivity toward HMF due to its excellent solubility and accessibility in DMSO-H 2 O media, and the release of formic acid in reaction further facilitates HMF production. BCF synthesized with different ball milling times shows different degrees of substitution of formyl groups, which could serve as an indicator and regulate the HMF production. The green synthesis of cellulose formate creates an efficient pathway for HMF production.

5-hydroxymethylfurfural↗
DOE OSTI2023

Towards functionalized lignin and its derivatives for high-value material applications

In pursuit of low-carbon development, the production of diverse functional materials from renewable resources, especially lignocellulosic biomass, is of vital importance. Lignin is a major component of lignocellulose, and it is nature's only true high-volume aromatic polymer, which has the advantages of biodegradability, biocompatibility, and low acquisition cost. After modification by a variety of physicochemical strategies, it can be applied as an alternative to basic industrial materials, including polyurethanes, phenolic, and epoxy resins, which stands comparably to conventional synthetic polymers in terms of both performance and reduced cost. To further unlock the potential of lignin, an alluring opportunity is the exploitation of lignin for high-value materials, especially nanomaterials, that find extensive applications in energy and environment areas. This review provides a systematic summary and perspective of research that has been devoted to lignin transformation to high-value materials, ranging from industrially well-established engineering materials to the recently emerged nanomaterials that were used for energy and environment applications. Latest cutting-edge innovations on lignin modification, controlled depolymerization, and assembly during the last five years are summarized. Structure-function relationships of lignin materials in terms of their specific applications are analyzed. Furthermore, challenges and future opportunities for lignin conversion to high-value materials are also provided. We wish this review will stimulate further advances in lignin based high-value materials, and promote “waste” into “wealth”.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structure-performance relationships in lignin-based transesterification vitrimers: The role of lignin structural features

Lignin has been hailed as an ideal renewable alternative for petrochemical-based prepolymers in material synthesis for a sustainable and circular economy, due to its abundant aromatic network and high carbon content. However, the properties and performance of lignin-derived macromolecules are strongly influenced by the lignin itself. While numerous studies have explored the impact of lignin content on the thermomechanical performance of lignin-based vitrimers, literature on how the inherent structural features of lignin affect these properties is scanty. In this study, hardwood organosolv lignin was fractionated in ethyl acetate, ethanol, and acetone to obtain lignin fractions with varying structural characteristics. These fractions were then modified through carboxylation and crosslinked with epoxidized soybean oil (ESO) at a hydroxyl to epoxy group ratio of 1:1 to produce lignin-based transesterification vitrimers (LVs). The thermal properties (i.e. glass transition temperature and thermal stability), tensile strength, storage modulus, and stress relaxation behavior of the LVs were studied and carefully related to the structural features of lignin. The results revealed a positive relationship between strong hydroxyl content in modified lignin and the tensile strength (5.10–9.71 MPa), storage modulus (1099.4 – 1372.8 MPa), crosslinking density, and stress relaxation of the LVs. Additionally, both the storage modulus and tensile strength exhibited a positive relationship with the ratio of rigid linkages in modified lignin, while lignin molecular weight was found to significantly impact the thermal properties of LVs (i.e Tg and thermal stability). This study not only highlights the valorization of lignin in vitrimer synthesis but also provide insights for designing lignin-based materials with tailored properties for specific applications.

Bio-based polymer↗
DOE OSTI2023

Lytic polysaccharide monooxygenase synergized with lignin-degrading enzymes for efficient lignin degradation

Even though the discovery of lytic polysaccharide monooxygenases (LPMOs) has fundamentally shifted our understanding of biomass degradation, most of the current studies focused on their roles in carbohydrate oxidation. However, no study demonstrated if LPMO could directly participate to the process of lignin degradation in lignin-degrading microbes. This study showed that LPMO could synergize with lignin-degrading enzymes for efficient lignin degradation in white-rot fungi. The transcriptomics analysis of fungi Irpex lacteus and Dichomitus squalens during their lignocellulosic biomass degradation processes surprisingly highlighted that LPMOs co-regulated with lignin-degrading enzymes, indicating their more versatile roles in the redox network. Biochemical analysis further confirmed that the purified LPMO from I. lacteus CD2 could use diverse electron donors to produce H 2 O 2 , drive Fenton reaction, and synergize with manganese peroxidase for lignin oxidation. The results thus indicated that LPMO might uniquely leverage the redox network toward dynamic and efficient degradation of different cell wall components.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Dependency of CO 2 methanation on the strong metal-support interaction for supported Ni/CeO 2 catalysts

The strong metal-support interaction (SMSI) for supported Ni/CeO 2 catalysts with different CeO 2 nanomorphologies was systematically explored. The degree of encapsulation of Ni particles originating from the SMSI effect was found to follow the trend of Ni/CeO 2 -(1 1 1) > Ni/CeO 2 -(1 0 0) > Ni/CeO 2 -(110 + 100), which parallels the CO 2 hydrogenation activity. Quasi in situ XPS reveals the presence of Ce 3+ sites in accordance with the formation of an amorphous surface CeOx layer encapsulating the Ni nanoparticles. In situ DRIFTS indicates the reaction pathway and rate-determining step are dependent on the degree of the SMSI effect, leading to distinct selectivities towards CH 4 , especially at a high weight hourly space velocity (WHSV). Finally, these findings present a fundamental strategy about tailoring catalytic performance through support facet dependent susceptibility of SMSI phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Inorganic acid-catalyzed hydrogen peroxide-acetic acid pretreatment for selective delignification of poplar

Effects of different inorganic acids as catalysts on the delignification ability of hydrogen peroxide-acetic acid (HPAA) pretreatment were unclear. Herein, the oxidizability of HCl, HBr, H 2 SO 4 , and H 3 PO 4 -catalyzed HPAA on the delignification of poplar were investigated. The ionized H + from inorganic acids catalyzed the synthesis of peracetic acid and improved the oxidizability of HPAA. The anion of inorganic acids caused ineffective decomposition of peroxides and inorganic acids. After the addition of poplar, the H 2 SO 4 -catalyzed HPAA pretreatment exhibited the lowest pH than other inorganic acids catalyzed systems. After the catalysis by inorganic acid, HPAA removed 78.1–91.4 % poplar lignin. Compared with other inorganic acids, the H + of H 2 SO 4 exhibited superior retention in HPAA pretreatment of poplar. After poplar pretreated with the same initial pH value of inorganic acid-catalyzed HPAA, the H 2 SO 4 -catalyzed HPAA showed the strongest delignification ability of poplar. The presence of free radicals in inorganic acid-catalyzed HPAA was unnecessary for the delignification of poplar. Furthermore, this paper elucidated that the ionized H + of inorganic acid mainly enhanced the oxidizability of HPAA for the selectively delignification of ability of HPAA pretreatment.

In-situ synthesis↗
DOE OSTI2023

An integrated biorefinery approach to obtain xylo-oligosaccharides from corncob using lactic acid-rich fermentation broth

Although xylo-oligosaccharides production from lignocelluloses via lactic acid hydrolysis is advantageous in terms of high yields with less by-products, the use of high purity lactic acid inevitably increases the cost of xylo-oligosaccharides production. The utilization of lactic acid-rich fermentation broth for xylo-oligosaccharides production can avoid the separation and purification of lactic acid. However, the feasibility of lactic acid-rich fermentation broth for xylo-oligosaccharides production from lignocelluloses was unclear. In this work, the results indicated that the highest xylo-oligosaccharides yield of 72% was obtained from corncob by lactic acid-rich fermentation broth pretreatment and xylanase hydrolysis. Subsequently, monosaccharides-rich hydrolysate (90.9 g/L) was obtained from solid residues of corncob by cellulase hydrolysis. Lactic acid-rich fermentation broth was produced by Weizmannia coagulans fermentation of the monosaccharide-rich hydrolysate. Besides, the obtained xylo-oligosaccharides and lactic acid mixture might be used as feed additives, avoiding the purification and separation of lactic acid or xylo-oligosaccharides. Meanwhile, the production cost of feed grade xylo-oligosaccharides from this work was much lower than the current market price. Overall, this work proposed a new strategy for efficient and environmental-friendly production of xylo-oligosaccharides from corncob.

09 BIOMASS FUELS↗
DOE OSTI2022

Impact of biomass ash content on biocomposite properties

Owing to its low cost and sustainable nature, lignocellulosic biomass has been utilized for reinforcing polymers, but it is crucial to understand the impact of high-ash concentrations in biomass on composite strength and processing. Biomass is not only desirable for biofuel production but could also have a strong market, if high-ash biomass is acceptable, for biocomposites. In this work, natural fibers (switchgrass and corn stover) were used to reinforce polylactic acid (PLA) to produce biocomposites. Natural fibers were pretreated to obtain fibers that contain different percentages of ash. The mechanical properties (such as Young's modulus, tensile strength, failure strain, storage modulus) of corn stover/PLA composites remained largely unaffected by the ash concentration of the biomass fibers, despite the large range of ash contents (2.2–11.9 wt%). Furthermore, the tensile strengths of switchgrass/PLA composites were slightly negatively affected by the ash concentration of the switchgrass fibers (0.7–2.1 wt%). Both the switchgrass/PLA and the corn stover/PLA composites exhibited a high-enough tensile strength (49–57 MPa) and suitable complex viscosity (2.0–7.0 kPa·s at the frequency of 3.2 rad/s). They are expected to be 3D-printable through an extrusion-based additive manufacturing process.

36 MATERIALS SCIENCE↗