Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Structural and electrical properties of organic stilbazolium single crystal of DSCHS

Organic nonlinear optical crystal 4-N, N-Dimethyl Amino-4’N’-Methyl-Stilbazolium 3-Carboxy-4-Hydroxy benzenesulfonate (DSCHS) has been successfully grown from aqueous methanol solution by adopting slow solvent evaporation technique. Chemical composition of the sample was confirmed by CHN analysis. Powder X-ray diffraction analysis was carried out and it shows that DSCHS crystal belongs to triclinic structure with Pl space group. It is found that this material exhibits positive photoconductivity. Dielectric studies were also carried out for different temperature by varying the frequency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

The impact of carbon coating on the synthesis and properties of α"–Fe 16 N 2 powders

This study presents the preparation of carbon composite Fe 16 N 2 powders, and the influence of a protective carbon coating on the yield and magnetic properties of Fe 16 N 2 . Nanoparticle precursors with and without carbon were reacted under ammonia gas flow to produce Fe 16 N 2 . X-ray diffraction indicates that the powders contain typically 50-60% Fe 16 N 2 , with the remaining phases being unreacted iron, Fe 4 N or Fe 3 N. Transmission electron microscopy demonstrates that the carbon coating is effective atnd reducing the level of sintering of Fe nanoparticles during the reduction stage prior to ammonolysis to form Fe nanoparticles. In situ TEM was used to observe loss of ordering in the nitrogen sublattice of carbon composite Fe 16 N 2 powders in the range of 168 °C to 200 °C. Magnetic susceptibility measurements show maximum values for saturation magnetization in the range of 232 emu/g -1 , and for coercivity near 930 Oe, for samples measured up to 2T applied field at 300K.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Crystal structure and ion conductivity of a new mixed-anion phosphate LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7}

A new lithium-containing phosphate, LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7}, was prepared by a solid-state reaction, and it was characterized by an ab initio structure determination method on the basis of synchrotron powder X-ray diffraction data. LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7} was found to be orthorhombic (space group Pnma) with lattice parameters a=9.0387(1) Å, b=10.6072(1) Å, c=8.3065(1) Å, and V=796.39(1) Å{sup 3}. The structure features infinite [Mg{sub 3}O{sub 10}]{sub ∞} layers that are parallel to the bc plane and that are interconnected along the a axis by PO{sub 4} and P{sub 2}O{sub 7} groups. The [Mg{sub 3}O{sub 10}]{sub ∞} layer contains Mg{sub 3}O{sub 14} trimers that are formed by three edge-shared MgO{sub 6} octahedra. The PO{sub 4} and P{sub 2}O{sub 7} groups are located alternatively between [Mg{sub 3}O{sub 10}]{sub ∞} layers. This gives rise to a three-dimensional framework that contains large tunnels along the directions [1 0 0] and [0 1 0]; the Li{sup +} ions are stabilized in these tunnels. AC impedance spectroscopy shows that LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7} has an ionic conductivity of 3.40×10{sup −5} S cm{sup −1} at 769 K, with an activation energy of 1.17 eV. - Graphical abstract: Polyhedral view of LiMg3(PO4)P2O7. Li+ ions are represented by orange spheres, MgO6 groups by octahedra, and PO4 groups by tetrahedra. - Highlights: • New compound LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7} is reported. • The crystal structure is investigated by synchrotron XRD analysis. • The structure features [Mg{sub 3}O{sub 10}]{sub ∞} layers with interconnecting PO{sub 4} and P{sub 2}O{sub 7} groups. • Correlation between the crystal structure and ionic conductivity is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Comparative study of glycine single crystals with additive of potassium nitrate in different concentration ratios

Semi-organic crystals of Glycine Potassium Nitrate (GPN) with potential applications in Non linear optics (NLO) were grown using slow evaporation technique. Glycine and Potassium Nitrate were taken in three different concentration ratios of 3:1, 2:1 and 1:1 respectively. We checked the solubility of the material in distilled water at different temperatures and could observe the growth of crystals in 7 weeks time. Purity of the grown crystals was confirmed by Energy Dispersive X-ray Analysis (EDAX) and CHN analysis. GSN Powder X-ray diffraction pattern was recorded to confirm the crystalline nature. To confirm the applications of grown crystals in opto-electronics field, UV-Vis-NIR study was carried out. Dielectric properties of the samples were studied in between the frequency range 1Hz to 100 KHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Facile route of biopolymer mediated ferrocene (FO) nanoparticles in aqueous dispersion

In this paper, we present a facile method for production stable aqueous dispersion of ferrocene (FO) nanoparticles. Ferrocene compounds were employed to achieve stable nanodispersions, stabilized with three different biopolymers namely, alginate, CM-dextran and chitosan. The nanoparticles produce are spherical, less than 10 nm in mean diameter and highly stable without any sedimentation. Fourier infrared transform (FTIR) and X-ray diffraction (XRD) studies confirmed the purity of ferrocene nanoparticles there is no modifications occur during the preparation route. FTIR spectra results were consistent with the presence of absorption band of cyclopentadienyl ring (C{sub 5}H{sub 5}{sup −} ion) which assigned to ν(C-C) vibrations (1409 cm-1), δ(C-H) stretching at 1001 cm{sup −1} and π(C-H) vibrations at 812 cm{sup −1}. Furthermore, all functional group for biopolymers such as C O from carboxyl group of CM-dextran and sodium alginate appears at 1712 cm{sup −1} and 1709 cm{sup −1} respectively, indicating there are steric repulsion interactions for particles stabilization. Powder X-ray diffraction patterns of sedimented samples of the biopolymers-stabilized ferrocene (FO) showed all reflections which were indexed respectively to the (−110), (001), (−201), (−111), (200), (−211), (210), (120) and (111) according to the monoclinic phase ferrocene. This confirmed that the products obtained were of high purity of Fe and EDAX analysis also suggests that the presence of the Fe element in the colloidal dispersion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Analysis of neptunium oxides produced through modified direct denitration

Production of neptunium-237 ( 237 Np) target materials for plutonium-238 ( 238 Pu) radioisotope thermoelectric generators (RTGs) for deep space exploration requires advanced chemistry and engineering development. Currently, the domestic Pu-238 Supply Program at Oak Ridge National Laboratory produces neptunium dioxide (NpO 2 ) for target material using a modified direct denitration (MDD) flowsheet. Although the chemistry, reaction mechanisms, and product characteristics of MDD are well understood for uranium, corresponding studies of the neptunium system are still needed to continue optimization of target material properties, production equipment design, and production flowsheets. Here, the objective of this work is to characterize crystalline phases, morphology, surface texture, and particle size of NpO 2 produced via MDD reactions. Solid-phase characterization techniques, including powder X-ray diffraction (pXRD) and scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), were employed to achieve this objective. Subsequent data processing using the Morphological Analysis for Material Attribution (MAMA) software was performed to analyze particle morphology and size. Broadly, the powders were found to contain a mixture of NpO 2 and Np 2 O 5 after denitration with a variety of morphologies. After high-firing, the product was found to be NpO 2 with a typical polycrystalline oxide morphology and a grain size ranging from 0.72 to 0.94 µm. These analyses provide knowledge on the reaction pathway for a non-traditional NpO 2 synthesis method and offer additional unique insight into production-scale environments for transuranic materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Metal-organic frameworks based on magnesium(II): adsorption and luminescence properties

Two new metal-organic frameworks based on magnesium(II) ions, [Mg{sub 4}(bdc){sub 3}(dma){sub 6}(NO{sub 3}){sub 2}]•DMA (1; bdc is 1,4-benzenedicarboxylate; dma, DMA is N,N-dimethylacetamide) and [Mg{sub 3}(bpdc){sub 3}(nmp){sub 4}] (2; bpdc is 4,4´-biphenyldicarboxylate; nmp is N-methylpyrrolidone), were synthesized in DMA or NMP, respectively. According to the single-crystal X-ray diffraction data, compound 1 is built of binuclear carboxylate units {Mg_2(O_2CR)_3}, which were previously not observed in metal-organic frameworks. Compound 2 is based on trinuclear carb oxylate units {Mg_3(O_2CR)_6}. Compound 1 has a layered structure (hcb topology), whereas compound 2 has a distorted three-dimensional cubic structure (pcu topology). The phase purity and chemical identity of the compounds were confirmed by IR spectroscopy, thermogravimetry, elemental analysis, and powder X-ray diffraction. Photoluminescence properties of both compounds are indicative of intraligand charge-transfer transitions of one (for 1) or two (for 2) types. Textural characteristics of an activated sample of 1 were measured by nitrogen and hydrogen adsorption at 77 K and by carbon dioxide adsorption at 195 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Zinc(II) and Cadmium(II) coordination polymers constructed from phenylenediacetate ligands

ABSTRACT: A series of new coordination polymers {[Zn(μ-opda)(μ-bpa)]·2H_2O}{sub n} (1), [Zn(μ{sub 3}-ppda)(μ-bpa)]{sub n} (2), [Cd(μ{sub 3}-ppda)(μ-bpa)]{sub n} (3), [Cd(μ{sub 3}-mpda)(μ-bpa)]{sub n} (4) and [Cd(μ{sub 3}-mpda)(μ-bipy)]{sub n} (5), (o/m/ppda=1,2/1,3/1,4-phenylenediacetate, bpa=1,2-bi(4-pyridyl)ethane, bipy=4,4′-bipyridine) were synthesized. Their structures were characterized by elemental analysis, IR spectroscopy, single-crystal and powder X-ray diffraction. Furthermore, the effect of metal sources (zinc acetate and zinc oxide) and acidity of the solution on the structure of the coordination polymers was discussed for complexes 1 and 5, respectively. The single-crystal X-ray crystallographic studies revealed that complexes 1, 3, 4 and 5 are uninodal (4)-connected 2D frameworks and display sql topology with the point symbol of (4{sup 4}.6{sup 2}). Complex 2 is 3D coordination polymer and exhibits pcu topology with the point symbol of (4{sup 12}.6{sup 3}). In addition, the luminescent properties and thermal behavior of all complexes were also investigated. - Graphical abstract: Scheme 1. Topologies of Coordination Polymers Reported in This Paper.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Phase transitions of ε-HNIW in compound systems

The heat-induced phase transitions of ε-HNIW, both neat and coated with various additives used in plastic bonded explosives, were investigated using powder X-ray diffraction and differential scanning calorimetry. It was found that ε-HNIW, after being held at 70°C for 60 h, remained in the ε-phase. Applying other conditions, various phase transition parameters were determined, including T{sub c} (the critical phase transition temperature), T{sub 50} (the temperature at which 50% of the phase transition is complete) and T{sub 180} (the percentage of γ-HNIW present in samples heated to 180°C). According to the above three parameters, additives were divided into three categories: those that delay phase transition, those that raise the critical temperature and the transition rate, and those that promote the phase transition. Based on the above data, a phase transition mechanism is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Magnetic and ferroelectric studies of double perovskite (KBi)(FeNb)O{sub 6} ceramics

This work describe the synthesis and characterization of the (KBi)(FeNb)O{sub 6} (KBFN) complex Perovskite. This compound has been structurally characterized by powder X-ray diffraction. The magnetic property of KBFN has been measured. The magnetic properties of (KBi)(FeNb)O{sub 6} is found to be a antiferromagnetically at temperature ranging from {approx}26K. The experimental results indicates that the magnetic moments of Fe{sup 3+} ion in (KBi)(FeNb)O{sub 6} order antiferromagnetically with a slight ferromagnetic moment below ca .26K and weak ferromagnetic moments disappears above ca. 26 K. The ferroelectric behaviour of polarization vs. applied electric field measurements were taken for the KBFN pellet. The shape of the curve are neither consistent with ferroelectric behaviour but rather indicative of conduction.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Magnetic enhancement and coding in mechanosynthesized Ni{sub 0.3}Zn{sub 0.7}Fe{sub 2}O{sub 4} nanoparticles

The nanosized Ni{sub 0.3}Zn{sub 0.7}Fe{sub 2}O{sub 4} (∼ 15 nm) has been synthesized by high energy ball milling of the bulk powder sample. The sample has been characterized by powder x-ray diffraction, field emission and transmission electron microscopic and dc magnetic measurement techniques. The dc magnetic measurement on the sample indicates that the sample exhibit enhancement of magnetization compared to its counterparts synthesized by chemical methods. Moreover, the system stores the memory of either decrease or increase of magnetic field enabling a magnetic coding of “0” and “1” which can be profitably used in magnetic storage and sensing devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

In situ neutron scattering study of nanoscale phase evolution in PbTe-PbS thermoelectric material

Introducing nanostructural second phases has been proved to be an effective approach to reduce the lattice thermal conductivity and thus enhance the figure of merit for many thermoelectric materials. Furthermore studies of the formation and evolution of these second phases are central to understanding temperature dependent material behavior, improving thermal stabilities, as well as designing new materials. We examined powder samples of PbTe-PbS thermoelectric material using in situ neutron diffraction and small angle neutron scattering (SANS) techniques from room temperature to elevated temperature up to 663 K, to explore quantitative information on the structure, weight fraction, and size of the second phase. Neutron diffraction data showed the as-milled powder was primarily solid solution before heat treatment. During heating, PbS second phase precipitated out of the PbTe matrix around 480 K, while re-dissolution started around 570 K. The second phase remained separated from the matrix upon cooling. Furthermore, SANS data indicated there are two populations of nanostructures. The size of the smaller nanostructure increased from initially 5 nm to approximately 25 nm after annealing at 650 K, while the size of the larger nanostructure remained unchanged. Our study demonstrated that in situ neutron techniques are effective means to obtain quantitative information to study temperature dependent nanostructural behavior of thermoelectrics and likely other high-temperature materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Role of Alkalis in Orchestrating Uranyl-Peroxide Reactivity Leading to Direct Air Capture of Carbon Dioxide

Spectator ions have known and emerging roles in aqueous metal-cation chemistry, respectively directing solubility, speciation, and reactivity. Here, in this work, we isolate and structurally characterize the last two metastable members of the alkali uranyl triperoxide series, the Rb + and Cs + salts (Cs-U 1 and Rb-U 1 ). We document their rapid solution polymerization via small-angle X-ray scattering, which is compared to the more stable Li + , Na + and K + analogues. To understand the role of the alkalis, we also quantify alkali-hydroxide promoted peroxide deprotonation and decomposition, which generally exhibits increasing reactivity with increasing alkali size. Cs-U 1 , the most unstable of the uranyl triperoxide monomers, undergoes ambient direct air capture of CO 2 in the solid-state, converting to Cs 4 [U VI O 2 (CO 3 ) 3 ], evidenced by single-crystal X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. We have attempted to benchmark the evolution of Cs-U 1 to uranyl tricarbonate, which involves a transient, unstable hygroscopic solid that contains predominantly pentavalent uranium, quantified by X-ray photoelectron spectroscopy. Powder X-ray diffraction suggests this intermediate state contains a hydrous derivative of CsU V O 3 , where the parent phase has been computationally predicted, but not yet synthesized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Morphological Comparison of U3O8 Ore Concentrates from Canada Key Lake and Namibia Sources

Uranium ore concentrates from two different sources were examined using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The ore powders are referred to as Namibia (id. no. 90036, LIMS id. no. 18775) and Canada Key Lake (id. no. 90019, LIMS id. no. 18774). Earlier work identified the ores as the U₃O₈ phase of uranium oxide using x-ray diffraction. Both sets of powders were in the form of dark brown to black powder fines. However, the Canada Key Lake concentrates contained larger chunks of material on the millimeter scale that were easily visible to the unaided eye. The powders were mounted for SEM examination by hand dispersing a small amount onto conductive sticky tape. Two types of applicators were used and compared: a fine-tipped spatula and a foam-tipped applicator. The sticky tape was on a standard SEM “tee” mount, which was tapped to remove loose contamination before being inserted into the SEM.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Influence of Iron Content on Microstructure and Magnetic Properties of Sr{sub 0.3}La{sub 0.4}Ca{sub 0.3}n(Fe{sub 2}O{sub 3})Co{sub 0.4}

In this work, the hexagonal ferrite Sr{sub 0.3}La{sub 0.4}Ca{sub 0.3}n (Fe{sub 2}O{sub 3})Co{sub 0.4}, where n ranging from 5.5 to 6.0 with a step of 0.1, and magnetic powders and magnets were synthesized by solid-states reaction. The microstructure of the magnetic powders was investigated by X-ray diffraction (XRD). And then we can found that a single magnetoplumbite phase is obtained for magnetic powders as a result when 5.6 ≤ n ≤ 5.8. When the iron content in the magnetic powders increased continuously, the diffraction peaks of α-Fe{sub 2}O{sub 3} were observed. Scanning electron microcopy (SEM) was used to explore the micrographs of the magnets and the hexagonal-shaped crystals were found obviously. The magnetic properties of the M-type hexagonal ferrites Sr{sub 0.3}La{sub 0.4}Ca{sub 0.3}n(Fe{sub 2}O{sub 3})Co{sub 0.4} were studied by using vibrating sample magnetometry. The saturation magnetization (M{sub s}) first increased and then began to decrease with the n increasing. While the coercivity first decreased with the n from 5.5 to 5.9 and then increased when n ≥5.9. The coercivity (H{sub c}) of the hexagonal ferrite Sr{sub 0.3}La{sub 0.4}Ca{sub 0.3}n(Fe{sub 2}O{sub 3})Co{sub 0.4} reaches the maximum value (H{sub c} = 1130 Oe) when the iron content (n = 5.5).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Suppressing Ordering in Equiatomic Fe-Co via Laser Powder Bed Fusion

Neutron and electron diffraction was employed to evaluate the effectiveness of thermal management strategies in suppressing the formation of the equilibrium-ordered B2 (CsCl) phase in equiatomic binary Fe-Co specimens fabricated by laser powder bed fusion additive manufacturing. Specimens with a tensile dogbone geometry were fabricated using various combinations of process parameters (laser power and raster speed) and thermal management strategies (no support struts, struts only in the top gauge section, and struts throughout the gauge section). Diffraction results demonstrate that the rapid solidification during PBF-L effectively minimized B2 formation, with laser power and effective scan velocity having no significant impact on the degree of ordering. Furthermore, the inclusion of support struts in the top grip region had no perceivable impact on ordering, whereas specimens with support struts in the gauge region exhibited no detectable ordering. Results are discussed in the context of thermal finite element analysis predictions.

Laser Material Processing↗
DOE OSTI2019

Enhanced Magneto-optical and Antibacterial Studies of Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.15)) Nanoparticles

Mg-doped BiFeO{sub 3} (Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.00 ≤ x ≤ 0.15)) nanoparticles (NPs) have been successfully prepared by simple solution combustion method using urea as fuel. The obtained product was sintered at 550 °C for 2 h to get pure-phase formation. The as-prepared samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), ultraviolet–visible (UV-Vis) absorption, photoluminescence (PL) spectra, and vibrating sample magnetometer (VSM) analysis. Powder XRD study revealed that all products exhibit rhombohedral structure with pure-phase formation. The average crystallite size of the samples decreased from 56.25 to 46.15 nm with increasing the concentration of Mg (x = 0.00, 0.05, 0.10, and 0.15). Surface morphology of the samples were analyzed by FE-SEM and TEM micrograph techniques, and the grain distribution was not quite homogeneous and observed agglomeration of the particles, which is mainly due to the magnetic interaction among them. EDX analysis confirmed the presence of Bi, Fe, O, and Mg elements without any form of impurity peak in all products. PL spectra shows a high intense peak at 464 nm, which is attributed to blue emission. The saturation magnetization is enhanced with increasing Mg doping level at RT. Antibacterial activity of Bi{sub 1−x}Mg{sub x}FeO{sub 3} NPs was found to be enhanced with increase in Mg doping concentration as it causes a reduction in the grain size of the samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2015

Hybrid Inorganic-Organic Materials with an Optoelectronically Active Aromatic Cation: (C 7 H 7 ) 2 SnI 6 and C 7 H 7 PbI 3

Inorganic materials with organic constituents—hybrid materials—have shown incredible promise as chemically tunable functional materials with interesting optical and electronic properties. Here, the preparation and structure are reported of two hybrid materials containing the optoelectronically active tropylium ion within tin- and lead-iodide inorganic frameworks with distinct topologies. The crystal structures of tropylium tin iodide, (C 7 H 7 ) 2 SnI 6 , and tropylium lead iodide, C 7 H 7 PbI 3 , were solved using high-resolution synchrotron powder X-ray diffraction informed by X-ray pair distribution function data and high-resolution time-of-flight neutron diffraction. Tropylium tin iodide contains isolated tin(IV)-iodide octahedra and crystallizes as a deep black solid, while tropylium lead iodide presents one-dimensional chains of face-sharing lead(II)-iodide octahedra and crystallizes as a bright red-orange powder. Experimental diffuse reflectance spectra are in good agreement with density functional calculations of the electronic structure. Calculations of the band decomposed charge densities suggest that the deep black color of tropylium tin iodide is attributed to iodide ligand to tin metal charge transfer, while the bright red-orange color of tropylium lead iodide arises from charge transfer between iodine and tropylium states. Understanding the origins of the observed optoelectronic properties of these two compounds, with respect to their distinct topologies and organic–inorganic interactions, provides insight into the design of tropylium-containing compounds for potential optical and electronic applications.

Maughan, Annalise E.↗