Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE ANGLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Impurity effects on local electronic structure of twisted bilayer cuprates

It has been recently proposed that a fully gapped d-wave superconducting phase emerges in twisted bilayer cuprates when twist angle is in the vicinity of 45°. By considering a twisted bilayer model with a moiré cell, we study the local electronic structure around a single-site impurity and impurity dimer in both topologically trivial and nontrivial superconducting states. Here we find that the topological nontrivial superconducting phase is robust against single scalar-potential impurity scattering but is very sensitive to the interlayer impurity dimer scattering, which avoids and enforces the creation of the subgap quasiparticle state. This behavior is intrinsic to the bilayer structure and topological nature, in contrast to the other types of impurities that inevitably bring subgap quasiparticle states. We expect that our results can contribute to the understanding of electronic properties of twisted bilayer cuprates systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurements of canard-induced roll oscillations

A small canard wing was installed in front of a delta wing which was mounted on a free-to-roll sting balance in a low-speed wind tunnel. The leading edge vortices, originating from the canard, enhanced self-induced roll oscillations at test conditions for which the basic delta wing would otherwise have been stable. Time-dependent roll angle, and normal and side force data recorded during these oscillations are presented along with their phase relations. It was found that the canard increased the range of angle of attack at which self-induced oscillations occurred. Also, at an angle of attack of about 46 deg asymmetric oscillations are observed.

Katz, J.↗

The influence of interfacial slip on two-phase flow in rough pores

The migration and trapping of supercritical CO 2 (scCO 2 ) in geologic carbon storage is strongly dependent on the geometry and wettability of the pore network in the reservoir rock. During displacement, resident fluids may become trapped in the pits of a rough pore surface forming an immiscible two-phase fluid interface with the invading fluid, allowing apparent slip flow at this interface. We present a two-phase fluid dynamics model, including interfacial tension, to characterize the impact of mineral surface roughness on this slip flow. We show that the slip flow can be cast in more familiar terms as a contact-angle (wettability)-dependent effective permeability to the invading fluid, a nondimensional measurement which relates the interfacial slip to the pore geometry. The analysis shows the surface roughness-induced slip flow can effectively increase or decrease this effective permeability, depending on the wettability and roughness of the mineral surfaces. Configurations of the pore geometry where interfacial slip has a tangible influence on permeability have been identified. The results suggest that for large roughness features, permeability to CO 2 may be enhanced by approximately 30% during drainage, while the permeability to brine during reimbibition may be enhanced or diminished by 60%, depending on the contact angle with the mineral surfaces and degrees of roughness. For smaller roughness features, the changes in permeability through interfacial slip are small. As a result, a much larger range of effective permeabilities are suggested for general fluid pairs and contact angles, including occlusion of the pore by the trapped phase.

54 ENVIRONMENTAL SCIENCES↗

Application of radar for automotive collision avoidance. Volume 1: Technical report

The purpose of this project was research and development of an automobile collision avoidance radar system. The major finding was that the application of radar to the automobile collision avoidance problem deserves continued research even though the specific approach investigated in this effort did not perform adequately in its angle measurement capability. Additional findings were that: (1) preliminary performance requirements of a candidate radar system are not unreasonable; (2) the number and severity of traffic accidents could be reduced by using a collision avoidance radar system which observes a fairly wide (at least + or - 10 deg) field of view ahead of the vehicle; (3) the health radiation hazards of a probable radar design are not significant even when a large number of radar-equipped vehicles are considered; (4) effects of inclement weather on radar operation can be accommodated in most cases; (5) the phase monopulse radar technique as implemented demonstrated inferior angle measurement performance which warrants the recommendation of investigating alternative radar techniques; and (6) extended target and multipath effects, which presumably distort the amplitude and phase distribution across the antenna aperture, are responsible for the observed inadequate phase monopulse radar performance.

Lichtenberg, C. L.↗

Impact of Nanosilicates on Poly(vinylidene fluoride) Crystal Polymorphism: Part 1. Melt-crystallization at High Supercooling

Polymorphism of poly(vinylidene fluoride), PVDF, in the presence of Lucentite STN organically modified silicate (OMS) is investigated for PVDF nanocomposites melt-crystallized at high supercooling temperatures where neat PVDF crystallizes exclusively in the alpha crystalline phase. Nanocomposites were prepared from solution with 0-1.0 wt% OMS composition. Here we observed that clay addition promotes gamma phase formation in nanocomposites melt-crystallized at high supercooling (i.e., at low crystallization temperature), whereas previously we showed that even small amount of nanosilicates resulted in beta phase formation in cold-crystallized PVDF nanocomposites. Wide-angle X-ray scattering (WAXS), Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) studies showed that {alpha}- and {gamma}-phases co-existed in nanocomposites containing up to 0.1 wt% OMS, and the amount of {alpha}-crystals substantially diminished for higher OMS content. Formation of {gamma}-crystal phase was confirmed with morphologic observation of spherulites of low-birefringence using polarizing optical and atomic force microscopies, and their crystalline structures were verified by FTIR and Raman microscopic spectroscopy. We also address in this work the ambiguities in assessing PVDF crystallographic phases, and correct the phase identification errors which have persisted up to this point in the literature based on melting point confusion. The crystal phase identification for PVDF nanocomposites is discussed and clarified, based on X-ray scattering, vibrational spectra, and thermal analysis. For reference, we provide a vibrational band list, indicating the close, or overlapping bands, of the three phases of PVDF: {alpha}, {beta} and {gamma}.

36 MATERIALS SCIENCE↗

Approaches for Achieving Broadband Achromatic Phase Shifts for Visible Nulling Coronagraphy

Visible nulling coronagraphy is one of the few approaches to the direct detection and characterization of Jovian and Terrestrial exoplanets that works with segmented aperture telescopes. Jovian and Terrestrial planets require at least 10(exp -9) and 10(exp -10) image plane contrasts, respectively, within the spectral bandpass and thus require a nearly achromatic pi-phase difference between the arms of the interferometer. An achromatic pi-phase shift can be achieved by several techniques, including sequential angled thick glass plates of varying dispersive materials, distributed thin-film multilayer coatings, and techniques that leverage the polarization-dependent phase shift of total-internal reflections. Herein we describe two such techniques: sequential thick glass plates and Fresnel rhomb prisms. A viable technique must achieve the achromatic phase shift while simultaneously minimizing the intensity difference, chromatic beam spread and polarization variation between each arm. In this paper we describe the above techniques and report on efforts to design, model, fabricate, align the trades associated with each technique that will lead to an implementations of the most promising one in Goddard's Visible Nulling Coronagraph (VNC).

Bolcar, Matthew R.↗

MODULATION MECHANISM OF TeV, GeV, AND X-RAY EMISSION IN LS5039

The emission mechanism of the gamma-ray binary LS5039 in TeV, GeV, and X-ray energy bands is investigated. Observed light curves in LS5039 show that TeV and GeV fluxes anticorrelate, whereas TeV and X-ray fluxes correlate. However, such correlated variations have not yet been reasonably explained at this stage. Assuming that relativistic electrons are injected constantly at the location of the compact object as a point source and that they lose energy only by the inverse Compton (IC) process, we calculate gamma-ray spectra and light curves by the Monte Carlo method, including the full electromagnetic cascade process. Moreover, we calculated X-ray spectra and light curves by using the resultant electron distribution. As a result, we are able to qualitatively reproduce spectra and light curves observed by H.E.S.S., Fermi, and Suzaku for the inclination angle i = 30{sup 0} and the index of injected electron distribution p = 2.5. We conclude that TeV-GeV anticorrelation is due to anisotropic IC scattering and anisotropic {gamma}{gamma} absorption, and that TeV-X correlation is due to the dependence of IC cooling time on orbital phases. In addition, the constraint on the inclination angle implies that the compact object in LS5039 is a black hole.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Successful N{sub 2} leptogenesis with flavour coupling effects in realistic unified models

In realistic unified models involving so-called SO(10)-inspired patterns of Dirac and heavy right-handed (RH) neutrino masses, the lightest right-handed neutrino N{sub 1} is too light to yield successful thermal leptogenesis, barring highly fine tuned solutions, while the second heaviest right-handed neutrino N{sub 2} is typically in the correct mass range. We show that flavour coupling effects in the Boltzmann equations may be crucial to the success of such N{sub 2} dominated leptogenesis, by helping to ensure that the flavour asymmetries produced at the N{sub 2} scale survive N{sub 1} washout. To illustrate these effects we focus on N{sub 2} dominated leptogenesis in an existing model, the A to Z of flavour with Pati-Salam, where the neutrino Dirac mass matrix may be equal to an up-type quark mass matrix and has a particular constrained structure. The numerical results, supported by analytical insight, show that in order to achieve successful N{sub 2} leptogenesis, consistent with neutrino phenomenology, requires a “flavour swap scenario” together with a less hierarchical pattern of RH neutrino masses than naively expected, at the expense of some mild fine-tuning. In the considered A to Z model neutrino masses are predicted to be normal ordered, with an atmospheric neutrino mixing angle well into the second octant and the Dirac phase δ≃20{sup ∘}, a set of predictions that will be tested in the next years in neutrino oscillation experiments. Flavour coupling effects may be relevant for other SO(10)-inspired unified models where N{sub 2} leptogenesis is necessary.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spin density wave and van Hove singularity in the kagome metal CeTi 3 Bi 4

Kagome metals with van Hove singularities near the Fermi level can host intriguing quantum phenomena such as chiral loop currents, electronic nematicity, and unconventional superconductivity. However, to our best knowledge, unconventional magnetic states driven by van Hove singularities–like spin-density waves–have not been observed experimentally in kagome metals. Here, we report the magnetic and electronic structure of the layered kagome metal CeTi 3 Bi 4 , where Ti kagome electronic structure interacts with a magnetic sublattice of Ce 3+ J eff = 1/2 moments. Neutron diffraction reveals an incommensurate spin-density wave ground state of the Ce 3+ moments, coexisting with commensurate antiferromagnetic order across most of the temperature-field phase diagram. The commensurate component is preferentially suppressed by thermal fluctuations and magnetic field, yielding a rich phase diagram involving an intermediate single-Q spin-density wave phase. First-principles calculations and angle-resolved photoemission spectroscopy identify van Hove singularities near the Fermi level, with the observed magnetic propagation vectors connecting their high density of states, strongly suggesting a van Hove singularity-assisted spin-density wave. These findings establish kagome metals LnTi 3 Bi 4 as a model platform where the characteristic electronic structure of the kagome lattice plays a pivotal role in magnetic order.

36 MATERIALS SCIENCE↗

Enhanced ordering in length-polydisperse carbon nanotube solutions at high concentrations as revealed by small angle X-ray scattering

Carbon nanotubes (CNTs) are stiff, all-carbon macromolecules with diameters as small as one nanometer and few microns long. Solutions of CNTs in chlorosulfonic acid (CSA) follow the phase behavior of rigid rod polymers interacting via a repulsive potential and display a liquid crystalline phase at sufficiently high concentration. Here, we show that small-angle X-ray scattering and polarized light microscopy data can be combined to characterize quantitatively the morphology of liquid crystalline phases formed in CNT solutions at concentrations from 3 to 6.5% by volume. We find that upon increasing their concentration, CNTs self-assemble into a liquid crystalline phase with a pleated texture and with a large inter-particle spacing that could be indicative of a transition to higher-order liquid crystalline phases. We explain how thermal undulations of CNTs can enhance their electrostatic repulsion and increase their effective diameter by an order of magnitude. By calculating the critical concentration, where the mean amplitude of undulation of an unconstrained rod becomes comparable to the rod spacing, we find that thermal undulations start to affect steric forces at concentrations as low as the isotropic cloud point in CNT solutions.

36 MATERIALS SCIENCE↗

Interior radiances in optically deep absorbing media. 3: Scattering from Haze L

The interior radiances are calculated within an optically deep absorbing medium scattering according to the Haze L phase function. The dependence on the solar zenith angle, the single scattering albedo, and the optical depth within the medium is calculated by the matrix operator method. The development of the asymptotic angular distribution of the radiance in the diffusion region is illustrated through a number of examples; it depends only on the single scattering albedo and on the phase function for single scattering. The exact values of the radiance in the diffusion region are compared with values calculated from the approximate equations proposed by Van de Hulst. The variation of the radiance near the lower boundary of an optically thick medium is illustrated with examples. The attenuation length is calculated for various single scattering albedos and compared with the corresponding values for Rayleigh scattering. The ratio of the upward to the downward flux is found to be remarkably constant within the medium. The heating rate is calculated and found to have a maximum value at an optical depth of two within a Haze L layer when the sun is at the zenith.

Kattawar, G. W.↗

Interior radiances in optically deep absorbing media. III Scattering from Haze L

The interior radiances are calculated within an optically deep absorbing medium scattering according to the Haze L phase function. The dependence on the solar zenith angle, the single scattering albedo, and the optical depth within the medium is calculated by the matrix operator method. The development of the asymptotic angular distribution of the radiance in the diffusion region is illustrated through a number of examples; it depends only on the single scattering albedo and on the phase function for single scattering. The exact values of the radiance in the diffusion region are compared with values calculated from the approximate equations proposed by Van de Hulst. The variation of the radiance near the lower boundary of an optically thick medium is illustrated with examples. The attenuation length is calculated for various single scattering albedos and compared with the corresponding values for Rayleigh scattering. The ratio of the upward to the downward flux is found to be remarkably constant within the medium.

Kattawar, G. W.↗

Exploiting Spin Fluctuations for Enhanced Pure Spin Current

We demonstrate the interplay of pure spin current, spin-polarized current, and spin fluctuation in 3d Ni x Cu 1–x . By tuning the compositions of the Ni x Cu 1–x alloys, we separate the effects due to the pure spin current and spin-polarized current. By exploiting the interaction of spin current with spin fluctuation in suitable Ni-Cu alloys, we obtain an unprecedentedly high spin Hall angle of 46%, about 5 times larger than that in Pt, at room temperature. Furthermore, we show that spin-dependent thermal transport via anomalous Nernst effect can serve as a sensitive magnetometer to electrically probe the magnetic phase transitions in thin films with in-plane anisotropy. As a result, the enhancement of spin Hall angle by exploiting spin current fluctuation via composition control makes 3d magnets functional materials in charge-to-spin conversion for spintronic application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Guidance, steering, load relief and control of an asymmetric launch vehicle

A new guidance, steering, and control concept is described and evaluated for the Third Phase of an asymmetrical configuration of the Advanced Launch System (ALS). The study also includes the consideration of trajectory shaping issues and trajectory design as well as the development of angular rate, angular acceleration, angle of attack, and dynamic pressure estimators. The Third Phase guidance, steering and control system is based on controlling the acceleration-direction of the vehicle after an initial launch maneuver. Unlike traditional concepts, the alignment of the estimated and commanded acceleration-directions is unimpaired by an add-on load relief. Instead, the acceleration-direction steering-control system features a control override that limits the product of estimated dynamic pressure and estimated angle of attack. When this product is not being limited, control is based exclusively on the commanded acceleration-direction without load relief. During limiting, control is based on nulling the error between the limited angle of attack and the estimated angle of attack. This limiting feature provides full freedom to the acceleration-direction steering and control to shape the trajectory within the limit, and also gives full priority to the limiting of angle of attack when necessary. The flight software concepts were analyzed on the basis of their effects on pitch plane motion.

Boelitz, Frederick W.↗

Structural stability and phase transition of Bi 2 Te 3 under high pressure and low temperature

Structural stability and phase transition of topological insulator Bi2Te3 were studied via angle-dispersive synchrotron radiation X-ray diffraction under high pressure and low temperature condition. The results manifest that the R-3m phase (phase I) is stable at 8 K over the pressure range up to 10 GPa and phase transition occurs between 8 K and 45 K at 8 GPa. According to the Birch-Murnaghan equation of state, the bulk modulus at ambient pressure B0 was estimated to be 45 ± 3 GPa with the assumption of B0' = 4. The structural robustness of phase I at 8 K suggests that the superconductivity below 10 GPa is related to phase I. Topological properties of superconducting Bi2Te3 phase under pressure were discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-magnetic-field phases in U 1-x Th x Te 2

At temperatures T much lower than its superconducting critical temperature T c = 2.1 K, the heavy fermion superconductor UTe 2 has a unique phase diagram of magnetic field H vs. φ and θ, angles H is tilted from the b-axis toward the a- and c-axes, respectively, of its orthorhombic unit cell. The phase diagram contains three distinct superconducting phases: SC1 in which φ and θ extend from 0 to 90° and H ≤ ~15 T; SC 2 for φ ≤ ~7°, θ ≤ ~4° and ~15 T ≤ H ≤ H m = ~35 T, the onset of the magnetic field polarized (FP) phase, and SC FP which resides entirely within the FP phase in a pocket of superconductivity extending from θ ≈ 20° to 40° and from ~40 T to above 60 T. We studied the evolution of the H vs. θ phase diagram for Th concentrations 0.005 ≤ x ≤ 0.047 in the U 1-x Th x Te 2 system at ~0.6 K. Within this range of x values, SC 1 extends over 0 ≤ θ ≤ 90° and H ≤ ~10 T for x = 0.047, while SC 2 is suppressed. The SC FP and FP phases are unaffected to x = 0.02 but are completely suppressed in the region x = 0.025 to 0.047 where the residual resistance ratio RRR ~3 indicates a significant amount of disorder. In conclusion, these results complement recent studies of nonsuperconducting disordered UTe 2 single crystals in which the SC 1 and SC 2 phases are absent, but the FP and so-called “orphan” SC FP phases are retained.

36 MATERIALS SCIENCE↗

STEM HAADF Image Simulation of the Orthorhombic M1 Phase in the Mo-V-Nb-Te-O Propane Oxidation Catalyst

A full frozen phonon multislice simulation of high angle annular dark field scanning transmission electron microscopy (HAADF STEM) images from the M1 phase of the Mo-V-Nb-Te-O propane oxidation catalyst has been performed by using the latest structural model obtained using the Rietveld method. Simulated contrast results are compared with experimental HAADF images. Good agreement is observed at ring sites, however significant thickness dependence is noticed at the linking sites. The remaining discrepancies between the model based on Rietveld refinement and image simulations indicate that the sampling of a small volume element in HAADF STEM and averaging elemental contributions of a disordered site in a crystal slab by using the virtual crystal approximation might be problematic, especially if there is preferential Mo/V ordering near the (001) surface.

36 MATERIALS SCIENCE↗