Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

High-field Q-slope mitigation due to impurity profile in superconducting radio-frequency cavities

In this study, we present new insights on the origin of the high-field Q-slope in superconducting radio-frequency cavities. Consequent hydrofluoric acid rinses are used to probe the radio-frequency performance as a function of the material removal of two superconducting bulk niobium cavities prepared with low temperature nitrogen infusion. The study reveals that nitrogen infusion affects only the first few tens of nanometers below the native oxide layer. The typical high-field Q-slope behavior of electropolished cavities is indeed completely recovered after a dozen hydrofluoric acid rinses. The reappearance of the high-field Q-slope as a function of material removal was modeled by means of London's local description of screening currents in the superconductor, returning good fitting of the experimental data and suggesting that interstitial impurities layers with diffusion length of the order to tens of nanometers can mitigate high-field Q-slope.

43 PARTICLE ACCELERATORS↗

Magnetic field induced structural changes in magnetite observed by resonant x-ray diffraction and Mössbauer spectroscopy

When a magnetic field is applied to a single crystal of magnetite at 124 K > T > 50 K , the monoclinic c M axis, which is the easy magnetization axis, switches to one of the $\langle$100$\rangle$ cubic directions, nearest to the direction of the magnetic field, and the phenomenon known as an axis switching (AS) occurs. Here, a global symmetry probe, resonant x-ray scattering, and a local probe, Mössbauer spectroscopy, are used to better understand the mechanism of axis switching. The behavior of three subsystems ordered below the Verwey transition temperature T V , i.e., lattice distortion, an orbital, and charge orderings, was observed via resonant x-ray scattering as a function of an external magnetic field. This was preceded by calculation of selected peak intensities using the fdmnes code. The Mössbauer spectroscopy studies confirmed that the magnetic field triggers electronic rearrangements and atomic displacements. The structure observed after the process of axis switching is very similar to the one obtained after cooling below T V with the magnetic field applied along one of the initial $\langle$100$\rangle$ cubic directions and distinct from the cooling in the absence of a magnetic field. From all the experimental observations of the phenomenon done so far, it is clear that AS starts from the fluctuations between octahedral iron orbitals that ultimately lead to the Verwey transition, but also to the higher-temperature trimeron dynamics. Therefore, further observation of the axis switching may be a key point to the understanding of a majority of strongly correlated electronic behavior in magnetite as well as in other transition metal oxides.

36 MATERIALS SCIENCE↗

Ability of TiO 2 (110) Surface to Be Fully Hydroxylated and Fully Reduced

Many TiO 2 applications (e.g., in heterogeneous catalysis) involve contact with ambient atmosphere and/or water. The resulting hydroxylation can significantly alter its surface properties. While behavior of single, isolated OH species on the model metal oxide surface of rutile TiO 2 (110) is relatively well understood, much less is known regarding highly-hydroxylated surfaces and/or whether TiO 2 (110) could be fully-hydroxylated under ultra-high vacuum conditions. Here we report in situ formation of a well-ordered, fully-hydroxylated TiO 2 (110)-(1 x 1) surface using an enhanced photochemical approach, key parts of which are pre-dosing of water and multi-step dissociative adsorption and subsequent photolysis of the carboxylic (trimethyl acetic) acid. Combining scanning tunneling microscopy, ultra-violet photoelectron spectroscopy and density functional theory results, we show that the attained “super OH” surface is also fully-reduced, as a result of the photochemical trapping of electrons at the OH groups.

Environmental Molecular Sciences Laboratory↗

Dynamics of Changes in the Photoluminescence of Porous Silicon after Gamma Irradiation

Radiation stability of the nanoporous silicon under gamma irradiation was investigated. Changes in the properties of porous silicon under gamma irradiation were registered by measurements of photoluminescence spectra and Fourier-transform infrared (FTIR) spectroscopy. Besides the appearance of point defects and their subsequent oxidation, the significant differences were shown to be in the behavior of the porous silicon properties in comparison with that of bulk silicon apparently due to the quantum size nature of nanoporous silicon.

36 MATERIALS SCIENCE↗

Utilization of Space Shuttle External Tank materials by melting and powder metallurgy

The Crucible Melt Extraction Process was demonstrated to convert scraps of aluminum alloy 2219, used in the Space Shuttle External Tank, into fibers. The cast fibers were then consolidated by cold welding. The X-ray diffraction test of the cast fibers was done to examine the crystallinity and oxide content of the fibers. The compressive stress-strain behavior of the consolidated materials was also examined. Two conceptual schemes which would adapt the as-developed Crucible Melt Extraction Process to the microgravity condition in space were finally proposed.

Chern, T. S.↗

A probabilistic approach to the dynamic analysis of ducts subjected to multibase harmonic and random excitation

The dynamic behavior of the discharge duct of the high-pressure oxidizer turbopump of a cryogenic rocket motor is investigated analytically. The probabilistic analysis program NESSUS (Numerical Evaluation of Stochastic Structures Under Stress; Cruse et al., 1988) is used to treat the uncertainties due to random and harmonic excitation (e.g., pump noise, pump-induced harmonics, and combustion noise), variations in engine inlet pressure, and changes in system damping. The load modeling procedure, the variation in power-spectral density in different zones of the engine structure, and the dynamic structural-analysis technique are described, and the numerical results of the NESSUS analysis are presented in extensive tables and graphs and discussed in detail.

Debchaudhury, Amit↗

Melting relations in the iron-sulfur system at ultra-high pressures - Implications for the thermal state of the earth

The melting temperatures of FeS-troilite and of a 10-wt-pct sulfur iron alloy have been measured to pressures of 120 and 90 GPa, respectively. The results document that FeS melts at a temperature of 4100 (+ or - 300) K at the pressure of the core-mantle boundary. Eutecticlike behavior persists in the iron-sulfur system to the highest pressures of measurements, in marked contrast to the solid-solutionlike behavior observed at high pressures in the iron-iron oxide system. Iron with 10-wt-pct sulfur melts at a similar temperature as FeS at core-mantle boundary conditions. If the sole alloying elements of iron within the core are sulfur and oxygen and the outer core is entirely liquid, the minimum temperature at the top of the outer core is 4900 (+ or - 400) K. Calculations of mantle geotherms dictate that there must be a temperature increase of between 1000 and 2000 K across thermal boundary layers within the mantle. If D-double-prime is compositionally stratified, it could accommodate the bulk of this temperature jump.

Williams, Quentin↗

Quantitative determination of microbial activity and community nutritional status in estuarine sediments: evidence for a disturbance artifact

In estuarine sediments with a high degree of vertical heterogeneity in reduced substrate and terminal electron acceptor concentrations, the method of exposure of the microbiota to labeled substrates can introduce a "disturbance artifact" into measures of metabolic activity. The detection of this artifact is based on quantitative measurement of the relative rates of incorporation of [14C]acetate into phospholipid fatty acids (PLFA) and endogenous storage lipid, poly-beta-hydroxyalkanoate (PHA). Previous studies have shown that PLFA synthesis measures cellular growth and that PHA synthesis measures carbon accumulation (unbalanced growth). The "disturbance artifact" of exposure to [14C]acetate was demonstrated by comparing injection of a core with the usual or pore-water replacement or slurry techniques. Only injection of labeled substrate allowed detection of preassay disturbance of the sediment with a garden rake. The raking increased PLFA synthesis with little effect to differences in concentration or distribution of [14C]acetate in the 10-min incubation. Bioturbation induced by sand dollar feeding in estuarine sediment could be detected in an increased PLFA/PHA ratio which was due to decreased PHA synthesis if the addition of labeled substrate was by the injection technique. Addition of labeled precursors to sediment by slurry or pore-water replacement induces greater disturbance artifacts than injection techniques.

Phospholipids/analysis/biosynthesis↗

Active Palladium Structures on Ceria Obtained by Tuning Pd–Pd Distance for Efficient Methane Combustion

Efficiently removing/converting methane via methane combustion imposes challenges on catalyst design: how to design local structures of a catalytic site so that it has both high intrinsic activity and atomic efficiency? By manipulating the atomic distance of isolated Pd atoms, herein we show that the intrinsic activity of Pd catalysts can be significantly improved for methane combustion via a stable Pd 2 structure on a ceria nanorod support. Guided by theory and confirmed by experiment, we find that the turnover frequency (TOF) of the Pd 2 structure with the Pd–Pd distance of 2.99 Å is higher than that of the Pd 2 structure with the Pd–Pd distance of 2.75 Å; at least 26 times that of ceria supported Pd single atoms and 4 times that of ceria supported PdO nanoparticles. The high intrinsic activity of the 2.99 Å Pd–Pd structure is attributed to the conductive local redox environment from the two O atoms bridging the two Pd 2+ ions, which facilitates both methane adsorption and activation as well as the production of water and carbon dioxide during the methane oxidation process. In conclusion, this work highlights the sensitivity of catalytic behavior on the local structure of active sites and the fine-tuning of the metal–metal distance enabled by a support local environment for guiding the design of efficient catalysts for reactions that highly rely on Pt-group metals.

36 MATERIALS SCIENCE↗

Acceptors in ZnO

Zinc oxide (ZnO) has potential for a range of applications in the area of optoelectronics. The quest for p-type ZnO has focused much attention on acceptors. In this paper, Cu, N, and Li acceptor impurities are discussed. Experimental evidence indicates these point defects have acceptor levels 3.2, 1.4, and 0.8 eV above the valence-band maximum, respectively. The levels are deep because the ZnO valence band is quite low compared to conventional, non-oxide semiconductors. Using MoO{sub 2} contacts, the electrical resistivity of ZnO:Li was measured and showed behavior consistent with bulk hole conduction for temperatures above 400 K. A photoluminescence peak in ZnO nanocrystals is attributed to an acceptor, which may involve a Zn vacancy. High field (W-band) electron paramagnetic resonance measurements on the nanocrystals revealed an axial center with g{sub ⊥} = 2.0015 and g{sub //} = 2.0056, along with an isotropic center at g = 2.0035.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance of Wrought Superalloys in Extreme Environments

As power generation systems move towards higher efficiency operation above 700 °C, wrought superalloys are the leading structural alloy candidates, including precipitation strengthened (PS) alloys 740 and 282 for the highest temperatures. To evaluate the performance of these alloys for these applications, a range of 500–5000 h evaluations have been conducted in environments including steam, supercritical CO2 (sCO2) and simulated combustion exhaust with H2O and/or SO2 at 700–800 °C and compared to baseline exposures in laboratory air and 1 bar CO2. These alloys primarily rely on the formation of an external Cr-rich oxide layer or scale for environmental protection and the reaction rates in all of these conditions are similar and relatively low. However, compared to a conventional solid solution strengthened alloy, like 625, the mass gains are higher for PS alloys due to the internal oxidation of the γ' forming additions, Al and Ti. Post-exposure characterization has quantified the reaction products and the depth of internal oxidation is not a concern and does not appear to increase above the baseline behavior in laboratory air. Likewise, there is no indication of internal carburization in the sCO2 environment at 750 °C/300 bar. The addition of 0.1% SO2 in CO2-10% H2O at 800 °C actually suppressed the internal oxidation at 1 bar but SO2 may be a concern when the total pressure is higher.

Pint, Bruce A.↗

Oxide Epitaxy with Large Symmetry Mismatch: Bronze-phase VO 2 on SrTiO 3

Epitaxial synthesis of complex oxides has stimulated considerable interest in creating novel functionalities and physical properties by controlling the interplay among the order parameters, i.e. lattice, spin, charge, and orbital order. Furthermore, heterostructures of oxide materials allow for well defined interfaces at which electronic and/or magnetic order can be coupled or tuned, as well as giving rise to emergent behavior distinct from the bulk properties of either material. Most studies on the epitaxial growth of complex oxides have focused on isostructural materials, e.g. perovskites on perovskites. While many binary oxides, such as TiO 2 and VO 2 , also offer intriguing physical properties, there are no substrates available with similar structures (lattice parameters and crystal symmetry). Thus, the ability to grow epitaxial thin films of binary oxides on lattice- and symmetry-mismatched substrates is of vital importance for exploring their unprecedented potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Nano-Scale Segregation in Nanostructured Ferritic Alloy 14YWT after Heavy Ion Irradiation

Oxide-dispersion-strengthened (ODS) steels, which contain nano-scale Y-Ti-O particles, are being considered for high-temperature radiation environments of nuclear reactors. It is important to accurately characterize the structure of grain boundaries and understand the behavior of segregation at grain boundaries in ODS steels during irradiation. The effect of heavy ion irradiation at 700 °C on Nanostructured Ferritic Alloy 14YWT was investigated using Atom Probe Tomography. Enrichment of Cr occurs at the grain boundaries as well as at nano oxide particle surfaces in the unirradiated sample. The enrichment of Ti and Y at a grain boundary corresponds with Y-Ti-O nano oxide particles with larger size compared to those in the grain, and the Cr enrichment is particularly accentuated at these larger nano oxide particles. The segregation of W occurs at the grain boundaries that are without nano oxide particles. O is segregated at grain boundaries without oxide particles after irradiation. The segregation behavior of Cr, W, Ti, and Y at the grain boundary in the irradiated samples is similar to that in the unirradiated sample. The nano oxide particles embedded in the grain boundary are a primary reason for the increase in Cr segregation at the grain boundary.

36 MATERIALS SCIENCE↗

The reactions of cobalt, iron and nickel in SO-2 atmospheres: Similarities and differences

The reactions of cobalt, iron and nickel in SO2 atmospheres are reviewed and compared. A mixed oxide-sulfide product layer is observed in all cases. Cobalt and nickel exhibits similar behavior. The observed rates are near the sulfidation rates, and the reaction rate is strongly influenced by the outward diffusion of metal through an interconnected sulfide network. A continuous interconnected sulfide is not observed in the oxide-sulfide scales formed on iron, and the reaction rates are more difficult to summarize. The differences and similarities among the three metals are explained in terms of the absence of scale-gas equilibrium and the ratio of the metal diffusivity in the corresponding oxide and sulfide.

Jacobson, N. S.↗

The reactions of cobalt, iron and nickel in SO2 atmospheres Similarities and differences

The reactions of cobalt, iron and nickel in SO2 atmospheres are reviewed and compared. A mixed oxide-sulfide product layer is observed in all cases. Cobalt and nickel exhibit similar behavior. The observed rates are near the sulfidation rates, and the reaction rate is strongly influenced by the outward diffusion of metal through an interconnected sulfide network. A continuous interconnected sulfide is not observed in the oxide-sulfide scales formed on iron, and the reaction rates are more difficult to summarize. The differences and similarities among the three metals are explained in terms of the absence of scale-gas equilibrium and the ratio of the metal diffusivity in the corresponding oxide and sulfide.

Jacobson, N. S.↗

Synthesis and Coordination Chemistry of Phosphine Oxide Decorated Dibenzofuran Platforms

A four-step synthesis for 4,6-bis(diphenylphosphinoylmethyl)dibenzofuran (4) from dibenzofuran and a two-step synthesis for 4,6-bis(diphenylphosphinoyl)dibenzofuran (5) are reported along with coordination chemistry of 4 with In(III), La(III), Pr(III), Nd(III), Er(III), and Pu(IV) and of 5 with Er(III). Crystal structure determinations for the ligands, 4 {center_dot} CH{sub 3}OH and 5, the 1:1 complexes [In(4)(NO{sub 3}){sub 3}], [Pr(4)(NO{sub 3}){sub 3}(CH{sub 3}CN)] {center_dot} 0.5CH{sub 3}CN, [Er(4)(NO{sub 3}){sub 3}(CH{sub 3}CN)] {center_dot} CH{sub 3}CN, [Pu(4)Cl4] {center_dot} THF and the 2:1 complex [Nd(4){sub 2}(NO{sub 3}){sub 2}]{sub 2}(NO{sub 3}){sub 2} {center_dot} (H{sub 2}O) {center_dot} 4(CH{sub 3}OH) are described. In these complexes, ligand 4 coordinates in a bidentate POP{prime}O{prime} mode via the two phosphine oxide O-atoms. The dibenzofuran ring O-atom points toward the central metal cations, but in every case it is more than 4 {angstrom} from the metal. A similar bidentate POP{prime}O{prime} chelate structure is formed between 5 and Er(III) in the complex, {l_brace}[Er(5){sub 2}(NO{sub 3}){sub 2}](NO{sub 3}) {center_dot} 4(CH{sub 3}OH){r_brace}0.5, although the nonbonded Er{hor_ellipsis} O{sub furan} distance is reduced to 3.6 {angstrom}. The observed bidentate chelation modes for 4 and 5 are consistent with results from molecular mechanics computations. The solvent extraction performance of 4 and 5 in 1,2-dichloroethane for Eu(III) and Am(III) in nitric acid solutions is described and compared against the extraction behavior of n-octyl(phenyl)-N,N-diisobutylcarbamoylmethyl phosphine oxide (O{Phi}DiBCMPO) measured under identical conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the role of electronic structure on photo-catalytic behavior of carbon-nitride polymorphs

A fully self-consistent density-functional theory (DFT) with improved functionals is used herein to provide a comprehensive account of structural, electronic, and optical properties of C 3 N 4 polymorphs. Using our recently developed van Leeuwen-Baerends (vLB) corrected local-density approximation (LDA), we implemented LDA + vLB within full-potential N th -order muffin-tin orbital (FP-NMTO) method and show that it improves structural properties and band gaps compared to semi-local functionals (LDA/GGA). We demonstrate that the LDA + vLB predicts band-structure and work-function for well-studied 2D-graphene and bulk-Si in very good agreement with experiments, and more exact hybrid functional (HSE) calculations as implemented in the Quantum-Espresso (QE) package. The structural and electronic-structure (band gap) properties of C 3 N 4 polymorphs calculated using FP-NMTO-LDA + vLB is compared with more sophisticated hybrid-functional calculations. We also perform detailed investigation of photocatalytic behavior using QE-HSE method of C 3 N 4 polymorphs through work-function, band (valence and conduction) position with respect to water reduction and oxidation potential. Our results show $γ$-C 3 N 4 as the best candidate for photocatalysis among all the C 3 N 4 polymorphs but it is dynamically unstable at ‘zero’ pressure. We show that $γ$-C 3 N 4 can be stabilized under hydrostatic-pressure, which improves its photocatalytic behavior relative to water reduction and oxidation potentials.

36 MATERIALS SCIENCE↗