Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nano structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Swift Heavy Ion Irradiation Effect On Nanometer Range W/Fe Multilayers

The present study reports the effect of swift heavy ion irradiation on structural and magnetic properties of sputtered Fe/W multilayer structure (MLS) having a bilayer composition of [W(30A)/Fe(20A)]{sub 10BL}. The MLS was irradiated by 120 MeV Au{sup 9+} ions up to fluence of 4x10{sup 13} ions/cm{sup 2}. Structural study of pristine and irradiated MLS reveals that intra-layer microstructure of Fe-layers in the MLS becomes nano-crystalline on irradiation. Magnetic studies show increase in coercivity at higher fluence which may be due to increase in surface and interface roughness after recrystallization of Fe-layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoscale-accuracy transfer printing of ultra-thin AlInGaN light-emitting diodes onto mechanically flexible substrates

The transfer printing of 2 μm-thick aluminum indium gallium nitride (AlInGaN) micron-size light-emitting diodes with 150 nm (±14 nm) minimum spacing is reported. The thin AlInGaN structures were assembled onto mechanically flexible polyethyleneterephthalate/polydimethylsiloxane substrates in a representative 16 × 16 array format using a modified dip-pen nano-patterning system. Devices in the array were positioned using a pre-calculated set of coordinates to demonstrate an automated transfer printing process. Individual printed array elements showed blue emission centered at 486 nm with a forward-directed optical output power up to 80 μW (355 mW/cm{sup 2}) when operated at a current density of 20 A/cm{sup 2}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface coating by mechanofusion modulates bulk charging pathways and battery performance of Ni-rich layered cathodes

Ni-rich layered oxides as high-capacity battery cathodes suffer from degradation at high voltages. Here, we utilize a dry surface modification method, mechanofusion (MF), to achieve enhanced battery stability. The simplicity, high yield, and flexibility make it cost-effective and highly attractive for processing at the industrial scale. The underlying mechanisms responsible for performance improvement are unveiled by a systematic study combining multiple probes, e.g., 3D nano-tomography, spectroscopic imaging, in situ synchrotron diffraction, and finite element analysis (FEA). MF affects the bulk crystallography by introducing partially disordered structure, microstrain, and local lattice variation. Furthermore, the crack initiation and propagation pattern during delithiation are regulated and the overall mechanical fracture is reduced after such surface coating. We validate that MF can alter the bulk charging pathways. Such a synergic effect between surface modification and bulk charge distribution is fundamentally important for designing next-generation battery cathode materials.

25 ENERGY STORAGE↗

3D reconstruction of carbon nanotube networks from neutron scattering experiments

Structure reconstruction from statistical descriptors, such as scattering data obtained using x-rays or neutrons, is essential in understanding various properties of nanocomposites. Scattering based reconstruction can provide a realistic model, over various length scales, that can be used for numerical simulations. In this study, 3D reconstruction of a highly loaded carbon nanotube (CNT)-conducting polymer system based on small and ultra-small angle neutron scattering (SANS and USANS, respectively) data was performed. These light-weight and flexible materials have recently shown great promise for high-performance thermoelectric energy conversion, and their further improvement requires a thorough understanding of their structure-property relationships. The first step in achieving such understanding is to generate models that contain the hierarchy of CNT networks over nano and micron scales. The studied system is a single walled carbon nanotube (SWCNT)/poly (3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT: PSS). SANS and USANS patterns of the different samples containing 10, 30, and 50 wt% SWCNTs were measured. These curves were then utilized to calculate statistical two-point correlation functions of the nanostructure. These functions along with the geometrical information extracted from SANS data and scanning electron microscopy images were used to reconstruct a representative volume element (RVE) nanostructure. Generated RVEs can be used for simulations of various mechanical and physical properties. This work, therefore, introduces a framework for the reconstruction of 3D RVEs of high volume faction nanocomposites containing high aspect ratio fillers from scattering experiments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Lowering oxygen evolution overpotential via morphology control of NiO x nanocatalysts

NiO x nanocatalysts with two distinct morphologies, nano-spindles and nano-plates, were synthesized and evaluated for oxygen evolution reaction (OER) performance. Spindle-like NiO x was prepared via a hydrothermal reaction of nickel nitrate and urea with cetyltrimethylammonium bromide as a surfactant at 120 °C for 24 h, forming Ni(OH) 2 -based intermediates that were subsequently calcined at 300 °C for 3 h. In contrast, platelet-like Ni(OH) 2 nanocrystals were obtained using nickel(II) acetate and KOH at 180 °C for 24 h, followed by calcination at 400 °C or 500 °C for 4 h to yield NiO x nano-plates. The NiO x nano-spindles exhibited an OER overpotential of 395 mV at 10 mA/cm 2 , whereas the NiO x nano-plates annealed at 400 °C and 500 °C showed overpotentials of 565 mV and 474 mV at 10 mA/cm 2 , respectively. Structural characterization and X-ray photoemission spectroscopy indicate these differences arise from morphology-dependent surface structures that govern catalytic activity.

36 MATERIALS SCIENCE↗

Multiscale Modeling of Damage Processes in Aluminum Alloys: Grain-Scale Mechanisms

This paper has two goals related to the development of a physically-grounded methodology for modeling the initial stages of fatigue crack growth in an aluminum alloy. The aluminum alloy, AA 7075-T651, is susceptible to fatigue cracking that nucleates from cracked second phase iron-bearing particles. Thus, the first goal of the paper is to validate an existing framework for the prediction of the conditions under which the particles crack. The observed statistics of particle cracking (defined as incubation for this alloy) must be accurately predicted to simulate the stochastic nature of microstructurally small fatigue crack (MSFC) formation. Also, only by simulating incubation of damage in a statistically accurate manner can subsequent stages of crack growth be accurately predicted. To maintain fidelity and computational efficiency, a filtering procedure was developed to eliminate particles that were unlikely to crack. The particle filter considers the distributions of particle sizes and shapes, grain texture, and the configuration of the surrounding grains. This filter helps substantially reduce the number of particles that need to be included in the microstructural models and forms the basis of the future work on the subsequent stages of MSFC, crack nucleation and microstructurally small crack propagation. A physics-based approach to simulating fracture should ultimately begin at nanometer length scale, in which atomistic simulation is used to predict the fundamental damage mechanisms of MSFC. These mechanisms include dislocation formation and interaction, interstitial void formation, and atomic diffusion. However, atomistic simulations quickly become computationally intractable as the system size increases, especially when directly linking to the already large microstructural models. Therefore, the second goal of this paper is to propose a method that will incorporate atomistic simulation and small-scale experimental characterization into the existing multiscale framework. At the microscale, the nanoscale mechanics are represented within cohesive zones where appropriate, i.e. where the mechanics observed at the nanoscale can be represented as occurring on a plane such as at grain boundaries or slip planes at a crack front. Important advancements that are yet to be made include: 1. an increased fidelity in cohesive zone modeling; 2. a means to understand how atomistic simulation scales with time; 3. a new experimental methodology for generating empirical models for CZMs and emerging materials; and 4. a validation of simulations of the damage processes at the nano-micro scale. With ever-increasing computer power, the long-term ability to employ atomistic simulation for the prognosis of structural components will not be limited by computation power, but by our lack of knowledge in incorporating atomistic models into simulations of MSFC into a multiscale framework.

Hochhalter, J. D.↗

Pterodactyl: Integrated Control Design for Precision Targeting of Deployable Entry Vehicles

Deployable Entry Vehicles (DEVs) enable in-situ scientific exploration at destinations with atmospheres across the solar system. Because they stow in a compact form and deploy only when ready to enter the atmosphere, DEVs relax the volume constraint imposed by rigid aeroshells. This work seeks to do for a DEV what the Wright Brothers did to propel modern day aviation: develop the guidance and control (G&C) methods that will make maneuvering and precision landing of DEV a reality. The Pterodactyl project objective is to deliver an integrated G&C methodology for a DEV, based on a detailed analysis that utilizes a Multi-disciplinary, Design, Analysis and Optimization (MDAO) framework. The current state-of-the-art for blunt body entry, G&C is rooted in the precision landing of vehicles such as Mars Science Laboratory (MSL) and Apollo, which used a propulsive reaction control system (RCS) to steer. Recent research has taken a particular interest in non-propulsive control for DEVs, including direct force control (angle of attack modulation via control surfaces or mass movement) and drag modulation (discrete change in ballistic coefficient). Using the MDAO framework that includes a guidance and control model to explore multiple control concepts for a DEV will shed light on the best design approach for these vehicles. In Pterodactyl, we will complete this study for a novel DEV concept, and then we will fabricate a functional prototype to help validate the design. The project is expected to down-select to a final control architecture by the end of 2018, and complete fabrication of the prototype by the end of 2019.The DEV chosen for detailed study in this project is the Adaptable Deployable Entry and Placement Technology (ADEPT). ADEPT uses a revolutionary 3D-woven carbon fabric that is foldable, can serve as primary structure, and can survive the extreme heating environment of atmospheric entry. The specific configuration of ADEPT under investigation is called Lifting Nano-ADEPT (LNA). LNA is designed for secondary payloads missions that require precision landing either for scientific objectives at a target destination or for payload recovery at Earth.The MDAO framework being created through this research, called COBRA-Pt (Composite Beam Roll-Up Solar Array-Prototype), will combine three critical elements of the system design: a guidance algorithm with Monte Carlo, a parametric control model, and vehicle geometry details. Novel control models being studied are deployable aerodynamic surfaces as well as shape morphing. These concepts will be compared at the system level with a more traditional propulsive RCS by comparing several key performance parameters. Upon completion of the design study, a functional prototype of LNA will be fabricated that will include the integration of guidance software and relevant control actuators. We expect this study will provide critical data that could feed into the development of an Earth-based flight test of LNA. The COBRA-Pt framework will provide a modular system by which to study any DEV concept in any atmosphere.

Smith, Brandon↗

Carbon Nanotube – Polysiloxane Nanocomposites for Ablative Thermal Protection Systems

Ultra-high temperature resins (UHTR) such as polysiloxane possess excellent characteristics for ablation including low thermal conductivity, lightweight composition, high thermal resistance, and the ability to form a durable char layer. To enhance its mechanical strength, the aerospace industry utilizes fiber reinforcement, such as carbon fiber reinforced polysiloxane (CF-polysiloxane), due to its high strength-to-weight ratio. Carbon nanotubes (CNTs) have advantages over microfibers including higher specific strength, lower density, and customizable thermal conductivity. Their nano-scale dimensions allow for a more homogenous material compared to traditional microfibers. Conventional methods of incorporating CNTs into resins often have structural defects such as voids, CNT agglomerations, and randomly dispersed CNTs, resulting in marginal improvements in properties. A novel approach known as bulk nanocomposite laminating (BNL) has been introduced involving CNT densification, resin polymer infiltration, and pressurized curing to achieve a high packing density exceeding 35% by volume. Characterization and testing to simulate re-entry conditions is performed with a sample of CNT-polysiloxane nanocomposite cured onto a CF-polysiloxane backing. These samples are subjected to ablation by an oxyacetylene flame while collecting temperature data to evaluate thermal protection properties.

Palak B Patel↗

Session 3: Irradiation and Thermal Stesses - NRC Graphite Behavior Model

Graphite anisotropic microstructure Graphite crystal structure and basal planes Response to irradiation and temperature C-axis and a-axis behavior The effect of porosity Nano-and micro-length scale Microscopic to macroscopic response Material property changes Defect length-scale factors Internal stress build-up Irradiation induced dimensional change Temperature effects Stress increases & property changes

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Freestanding three-dimensional core–shell nanoarrays for lithium-ion battery anodes

Here, structural degradation and low conductivity of transition-metal oxides lead to severe capacity fading in lithium-ion batteries. Recent efforts to solve this issue have mainly focused on using nanocomposites or hybrids by integrating nanosized metal oxides with conducting additives. Here we design specific hierarchical structures and demonstrate their use in flexible, large-area anode assemblies. Fabrication of these anodes is achieved via oxidative growth of copper oxide nanowires onto copper substrates followed by radio-frequency sputtering of carbon-nitride films, forming freestanding three-dimensional arrays with core–shell nano-architecture. Cable-like copper oxide/carbon-nitride core–shell nanostructures accommodate the volume change during lithiation-delithiation processes, the three-dimensional arrays provide abundant electroactive zones and electron/ion transport paths, and the monolithic sandwich-type configuration without additional binders or conductive agents improves energy/power densities of the whole electrode.

25 ENERGY STORAGE↗

Development of Bulk Nanocrystalline Tungsten Alloys for Fusion Reactor Structures

This project developed a technology for manufacturing bulk ultrafine tungsten materials that are at or near full density for fusion reactor structural applications, aiming to improve ductility and toughness of tungsten before and after irradiation. The project involved the development of fabrication processes for making bulk ultrafine grained W, the development of new alloys of ultrafine grained W and evaluations of properties of these specific materials. The goal of this fabrication process is to produce fully dense bulk W with ultrafine grain sizes, with uniform distributions of grain size and additives. To date there is no known process that could be used to make ultrafine grained tungsten in a fully dense state and in a cost-acceptable fashion. The specific technology described in this proposal for making ultrafine grained tungsten involves a suite of nano-particle processing and sintering techniques. The program also developed new alloys of ultrafine grained W, e.g. W-(Ta,V,Ti)-TiC alloys to improve ductility and toughness before and after irradiation. By completing this project, we achieved the following objectives: • Demonstrated experimentally the feasibility of producing bulk ultrafine grained tungsten alloys (at or near 100% dense, <1000 nm grain size) using the proposed process • Demonstrated the proposed ultrafine grained W alloys, namely, W-(Ta, V, Ti)-TiC, can indeed be made using the proposed process • Demonstrated that the properties of nano tungsten alloys meet the requirements for fusion reactor applications. The overall goal was to harness the potential of ultrafine grained W produced using the proposed processes as the core structural materials for future fusion reactors. The project was very successful overall, meeting all milestones and surpassing project goals in terms of process development and material’s blistering resistance properties. A novel process similar to the conventional press-and-sinter powder metallurgy method was developed for producing ultrafine grain tungsten from nanosize tungsten powders. Grain growth was significantly controlled during sintering by certain alloy compositions, particularly Ti, and most compositions sintered to maximum densification. To optimize this process, the effect of processing parameters on the densification and grain growth of nano-W powders was investigated. Near-fully densified tungsten was obtained at sintering temperatures between 1100 and 1300 °C, and both Ar and H2 sintering atmospheres were investigated. The Ar sintering atmosphere was determined to more favorably promote densification and minimize grain growth. The nanosized tungsten powder compacts were subjected to reduction in H2 as a part of the sintering cycle. The reduction temperature was found to have significant effects on the sintering of nano-W powder, primarily as a result of grain coarsening, which was seen at temperatures as low as 700 °C. In an effort to inhibit grain growth, the effect of Ti-based additives on the densification and grain growth of nano-W powders was investigated in this project. The addition of 1 wt.% Ti into tungsten led to more than a 63% decrease in average grain size of sintered samples at comparable density levels. Compared to conventional high temperature sintering, a lower temperature sintering cycle for a longer hold time resulted in both near-full density and fine grain size. The roles of the Ti additives include not only the inhibition of grain growth, but also the potential absorption of oxygen from W particles. The project has resulted in the publication; thus far, of six peer reviewed journal articles and seven conference presentations, as well as a master’s thesis. Two additional journal articles are currently in preparation. Presentations and articles were a particular focus of the second half of the project, once significant experimentation had been performed and analyzed. As part of our efforts to disseminate information of our results, the W research teams with Prof. Fang had a strong presence at multiple international conferences during 2015 and 2016. Several research groups in the US are now performing experiments using the ultrafine grained W materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identification of Simultaneous U(VI) Sorption Complexes and U(IV) Nanoprecipitates on the Magnetite (111) Surface

Sequestration of uranium (U) by magnetite is a potentially important sink for U in natural and contaminated environments. However, molecular-scale controls that favor U(VI) uptake including both adsorption of U(VI) and reduction to U(IV) by magnetite remain poorly understood, in particular, the role of U(VI)-CO{sub 3}-Ca complexes in inhibiting U(VI) reduction. To investigate U uptake pathways on magnetite as a function of U(VI) aqueous speciation, we performed batch sorption experiments on (111) surfaces of natural single crystals under a range of solution conditions (pH 5 and 10; 0.1 mM U(VI); 1 mM NaNO{sub 3}; and with or without 0.5 mM CO{sub 3} and 0.1 mM Ca) and characterized surface-associated U using grazing incidence extended X-ray absorption fine structure spectroscopy (GI-EXAFS), grazing incidence X-ray diffraction (GI-XRD), and scanning electron microscopy (SEM). In the absence of both carbonate ([CO{sub 3}]T, denoted here as CO{sub 3}) and calcium (Ca), or in the presence of CO{sub 3} only, coexisting adsorption of U(VI) surface species and reduction to U(IV) occurs at both pH 5 and 10. In the presence of both Ca and CO{sub 3}, only U(VI) adsorption (VI) occurs. When U reduction occurs, nanoparticulate UO{sub 2} forms only within and adjacent to surface microtopographic features such as crystal boundaries and cracks. This result suggests that U reduction is limited to defect-rich surface regions. Further, at both pH 5 and 10 in the presence of both CO{sub 3} and Ca, U(VI)-CO{sub 3}-Ca ternary surface species develop and U reduction is inhibited. These findings extend the range of conditions under which U(VI)-CO{sub 3}-Ca complexes inhibit U reduction.

99 GENERAL AND MISCELLANEOUS↗

Effect of Cobalt Oxide Nanoparticles on the Nano-scale Free Volume and Optical Properties of Biodegradable CMC/PVA Films

Chemically prepared cobalt oxide nanoparticles (NPs) were added to biodegradable carboxymethyl cellulose (CMC) (20%)/polyvinyl alcohol (PVA) (80%) blend films. The structural properties of these films were investigated by X-ray diffraction, Fourier transformation infrared spectroscopy (FTIR) and differential thermal analysis (DTA). Co{sub 3}O{sub 4}/(CMC + PVA) films show a semi-crystalline structure and the degree of crystallinity decreases with adding Co{sub 3}O{sub 4} NPs. FTIR confirms the good interaction between the blend chains and Co{sub 3}O{sub 4} NPs. The melting temperature T{sub m} for CMC/PVA is about 212 °C then decreased with increasing Co{sub 3}O{sub 4} content, due to some decrease in the ordered association of the blend which results in a decrease in the blend crystallinity. Positron annihilation lifetime spectroscopy (PALS) measurements were carried out with a conventional fast–fast coincidence spectrometer. It was found that ortho-positronium lifetime τ{sub 3} and free volume V{sub f} increase while o-Ps intensity I{sub 3} still constant as Co{sub 3}O{sub 4} concentration increases. This is because adding Co{sub 3}O{sub 4} NPs encourages the formation of o-Ps. The swelling ratio SR% as a function of Co{sub 3}O{sub 4} concentration was also studied and its value increases with Co{sub 3}O{sub 4} addition. The optical study illustrated the decrease of the transmittance T of the films from 87 to 35.5% with increasing Co{sub 3}O{sub 4} content from 0 to 0.9 wt%. Also, both the direct and indirect optical band gaps of the films red-shifted from 4.05 to 3.75 eV and 3.3 to 2.75 eV, respectively. The influence of Co{sub 3}O{sub 4} on the refractive index of the films is also reported.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Grains and Strains from Cepstral Analysis of 4D-STEM Nano-Diffraction Datasets

We report the availability of fast, high dynamic range pixel array detectors makes scanning convergent beam electron diffraction (CBED) a powerful tool for rapid, spatially resolved characterization of lattice structure over a wide range of length scales. However, to extract useful structural information from the large 4-dimensional datasets, especially for complex, 3D specimens, we must confront challenges with CBED intensity variations due to crystal mistilts and multiple scattering as well as challenges with precisely localizing diffracted disk centers.

36 MATERIALS SCIENCE↗

Intermediate phases in sodium intercalation into MoS 2 nanosheets and their implications for sodium-ion batteries

Alkali metal ion intercalation into layered transition-metal dichalcogenide structures is a promising approach to make next generation rechargeable batteries for energy storage. It has been noted that the number of Na-ions which can be reversibly intercalated and extracted per MoS 2 is limited, and the chemical and electrochemical processes/mechanisms remain largely unknown, especially for nano-sized materials. Here, in this study, sodiation of MoS 2 nanosheets are studied by in-situ electron diffraction and the phase transformations in sodiation are identified with the aid of DFT calculations to reveal the reaction mechanism. Several thermodynamically stable/metastable structures are identified in the sodiation pathway of MoS 2 nanosheets, previously unnoticed in bulk MoS 2 . The gradual reduction of Mo 4+ upon Na-ion intercalation leads to a transition of the Mo-S polyhedron from a trigonal prism to an octahedron around 0.375 Na per MoS 2 inserted (i.e. Na 0.375 MoS 2 ). When the intercalated Na-content is larger than 1.75 per MoS 2 structural unit (i.e. Na 1.75 MoS 2 ), the MoS 2 layered structure collapses and the intercalation reaction is replaced by an irreversible conversion reaction with the formation of Na 2 S and metal Mo nanoparticles. The calculated sodiation pathways reproduce the experimental sodiation voltages. The current observations provide useful insights in developing sodium-ion batteries with high cycling stability.

25 ENERGY STORAGE↗

One-step Ar/O{sub 2} thermal plasma processing of Y{sub 2}O{sub 3}:Eu{sup 3+} red phosphors: Phase structure, photoluminescent properties, and the effects of Sc{sup 3+} codoping

(Y{sub 0.95}Eu{sub 0.05}){sub 2}O{sub 3} red phosphors are synthesized in one step via Ar/O{sub 2} thermal plasma oxidation of atomized alcohol solutions of the component nitrates. Phase structure analysis found the direct products to be mixtures of a cubic and monoclinic phases, and the powder collected from the wall part of the plasma reactor as well as the finer portion of the total powder have significantly higher monoclinic contents ({approx}55 and 71 wt%, respectively). An almost pure-cubic structured phosphor powder can be converted from the phase mixture by annealing at a minimum temperature of 900 Degree-Sign C for 12 h, but at the expenses of significant coarsening/sintering of the nano-sized particles. It was first shown that codoping with 20 at% of Sc{sup 3+} may effectively retard crystallization of the undesired monoclinic phase and thus yield phosphor powders of high specific surface area ({approx}21.7 m{sup 2}/g) and significantly improved 611-nm red emission. Formation mechanism of the monoclinic phase and the effects of Sc{sup 3+} codoping on phase structure and luminescence properties were discussed. - Graphical abstract: Y{sub 2}O{sub 3}:Eu phosphors are synthesized in one-step via thermal plasma processing. The direct products are monoclinic and cubic phase mixtures, and Sc{sup 3+} codoping effectively suppresses crystallization of the undesired monoclinic phase to yield phosphor powders of high specific surface area and significantly improved photoluminescence. Highlights: Black-Right-Pointing-Pointer Thermal plasma processing yields Y{sub 2}O{sub 3}:Eu phosphors in one-step. Black-Right-Pointing-Pointer The direct products are monoclinic and cubic phase mixtures. Black-Right-Pointing-Pointer Sc{sup 3+} codoping effectively suppresses monoclinic crystallization. Black-Right-Pointing-Pointer Better luminescence is achieved via Sc{sup 3+} codoping.

36 MATERIALS SCIENCE↗

Photoluminescence enhancement in few-layer WS{sub 2} films via Au nanoparticles

Nano-composites of two-dimensional atomic layered WS{sub 2} and Au nanoparticles (AuNPs) have been fabricated by sulfurization of sputtered W films followed by immersing into HAuCl{sub 4} aqueous solution. The morphology, structure and AuNPs distribution have been characterized by electron microscopy. The decorated AuNPs can be more densely formed on the edge and defective sites of triangle WS{sub 2}. We have compared the optical absorption and photoluminescence of bare WS{sub 2} and Au-decorated WS{sub 2} layers. Enhancement in the photoluminescence is observed in the Au-WS{sub 2} nano-composites, attributed to localized surface plasmonic effect. This work provides the possibility to develop photonic application in two-dimensional materials.

36 MATERIALS SCIENCE↗

Energy transfer kinetics in oxy-fluoride glass and glass-ceramics doped with rare-earth ions

An investigation of donor-acceptor energy transfer kinetics in dual rare earths doped precursor oxy-fluoride glass and its glass-ceramics containing NaYF{sub 4} nano-crystals is reported here, using three different donor-acceptor ion combinations such as Nd-Yb, Yb-Dy, and Nd-Dy. The precipitation of NaYF{sub 4} nano-crystals in host glass matrix under controlled post heat treatment of precursor oxy-fluoride glasses has been confirmed from XRD, FESEM, and transmission electron microscope (TEM) analysis. Further, the incorporation of dopant ions inside fluoride nano-crystals has been established through optical absorption and TEM-EDX analysis. The noticed decreasing trend in donor to acceptor energy transfer efficiency from precursor glass to glass-ceramics in all three combinations have been explained based on the structural rearrangements that occurred during the heat treatment process. The reduced coupling phonon energy for the dopant ions due to fluoride environment and its influence on the overall phonon assisted contribution in energy transfer process has been illustrated. Additionally, realization of a correlated distribution of dopant ions causing clustering inside nano-crystals has also been reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗