Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multiphase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

MFiX Development Updates

This presentation discusses recent developments of the Multiphase Flow with Interphase eXchanges (MFiX) software. A brief review of all modeling approaches along with their cost versus accuracy is provided to guide users when selecting a model for a given application. The main new features of the past five official releases of MFiX are described. Improvement in chemistry management allow for easier simulation setup, and faster simulation speed. Progress in the implementation of a thin-wall boundary condition is presented. The major new model development over the past year is the release of the Glued Sphere Particle model (GSP), where component spheres are combined together to represent non-spherical particles. The integration of Machine Learning (ML) workflow in the CFD process is discussed with two applications: a surrogate model for stiff chemistry and the development of a PIC stress model using ML.

Dietiker, Jeff↗
DOE OSTI2024

Liquid Piston with Spray Cooling Near-Isothermal Compressor

The goal of this project was to prototype and characterize the performance of a liquid-piston spray-cooled gas compressor. The working principle of the compressor enables optimized high-efficiency operation over a very wide range of operating conditions, unlike conventional compressors that are optimized for a narrow range of operating conditions. The compressor technology is suitable for many applications, such as gas pipeline transport, gas storage, and commercial and residential heat pumps. Both physical testing and computational fluid dynamics (CFD) modeling of the processes using the Oak Ridge National Laboratory high-performance computing center were completed. The experimental and CFD studies focused on a near-isothermal liquid-piston compressor (LPC) that uses propylene glycol to compress CO 2 . The first prototype demonstrated isothermal operation during several sequentially executed cycles of CO 2 compression and raised the temperature of the compressed CO 2 by only 2 K, compared with approximately 6 K when the gas was compressed non-isothermally. Isothermal operation was demonstrated at CO 2 flow rates of up to 2 L/min. The second prototype was designed with two compression chambers to allow continuous flow of high-pressure CO 2 . However, the design of the valve train to direct flow between the compression chambers was not sufficient to allow demonstration of CO 2 compression. Numerical simulations of the LPC in which the compression chamber was filled with propylene glycol injected from the bottom inlet were performed using large eddy simulation (LES) with the wall-adapting local eddy-viscosity subgrid-scale model coupled with the multiphase volume of fluid (VOF) model to simulate the transient interface between gas and liquid and to capture the heat and mass transfers within the compression chamber. In this effort, the effects of boundary conditions applied to the LES-VOF calculations (i.e., no wall, an adiabatic wall, and a wall with a heat flux subscribed) on the overall pressure and temperature of the CO 2 gas as well as the transient evolution of flow and heat transfer within the compression chamber were investigated and are discussed in this report. The LES calculation with no wall showed no dynamical flow patterns, and the volume-averaged temperature of CO 2 increased from 305 to 392.7 K, whereas LES calculations with a constant wall temperature or a wall heat flux had similar increases of CO 2 temperatures. The results of the LES simulation using a wall heat flux showed different stages in the compression process and revealed dynamical formation and interaction of CO 2 gas layers and circulation flow patterns within the chamber that contributed to the overall heat transfer between the solid wall, gas, and liquid surface in the compressor. Though an industrial partnership for commercializing the compressor was not secured, the technology was attractive for an industrial partner to use in two research proposals in response to US Department of Energy funding opportunity announcements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Yttrium solid phase equation of state with uncertainty quantification

We discuss the development of an equation of state (EOS) for solid yttrium up to roughly 80 GPa. The EOS makes use of different experimental datasets, including measurements of the isobaric density, isobaric specific heat, room temperature isotherm, and principal shock Hugoniot. The fitting procedure is carried out using Markov Chain Monte Carlo (MCMC), where we fit model parameters for both the cold curve and ion thermal models simultaneously. The results show close agreement with experimental data and provide meaningful uncertainty estimates on the model parameters. This work serves as a first step towards a multiphase EOS for yttrium, which will include higher pressure solid phases (> 80 GPa), as well as modeling of the liquid phase.

36 MATERIALS SCIENCE↗
DOE OSTI2023

MFiX: Fractional-Step Method Implementation

A comprehensive, multiphase computational fluid dynamics (CFD) simulation solves several coupled transport equations including continuity, momentum, species, and energy. Chemical reactions further couple these equations through heats of reaction and rates of formation of products and rates of destruction of reactants. A fractional-step method separates changes attributed to chemical reactions from transport phenomena like convection and diffusion. When the governing equations are split into the transport and reacting components, efficient and independent methodologies can be exploited to solve the different systems. Specifically, discretization of field variable transport equations results in large, sparse matrices which are loosely coupled. These systems are solved in succession using iterative techniques that take advantage of the matrix structure. In contrast, chemical reactions tightly couple field variables locally within the domain (e.g., within a single computational cell) resulting in low dimensional but dense, nonlinear systems that are better solved using direct integration techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

EFRC-MUSE: Multi-Scale Fluid-Solid Interactions in Architected and Natural Materials

Phase interactions and fluid properties in geological and other environments are critical in applications ranging from hydrogen production and geologic storage and recovery, carbon dioxide storage and sequestration, and the sustainable use of water resources. The four goals of EFRC-MUSE: Multi-Scale Fluid-Solid Interactions in Architected and Natural Materials were based on the priority directions articulated in the Basic Research Needs documents, and the scientific needs in nanoscience. 1. Develop a fundamental understanding of confinement and surface interactions in mesoscale media with nanometer-sized pores on the phase behavior, thermodynamic and multiphase flow properties of multicomponent fluid mixtures. 2. Examine the impact of mineralogy and material heterogeneity on mechanical properties to better understand chemo-mechanical interactions in material failure. 3. Determine in-operando cross-scale structural and nanostructural material properties with fluids in confinement and flow under realistic condi

58 GEOSCIENCES↗
DOE OSTI2025

Wellbore Fracture Imaging Using Inflow Detection Measurements

One of the most striking measurements taken during DOE’s EGS Collab project at the 4850-foot depth location was the so-called ‘sewer cam’, which enabled direct visualization of the flow of water into the production well through fractures during the stimulation. The ability to see directly which fractures were flowing and (roughly) how much was a breakthrough in understanding the topology of the created fracture network. Achieving this kind of fracture flow imaging at FORGE would be more challenging because of the 225°C temperature, but equally or even more valuable if it could be achieved. In 2017, a joint project between Sandia and Stanford developed a downhole tool concept to measure the enthalpy of multiphase fluid entering a geothermal well from individual fractures (Gao et al., 2017). For the FORGE project, measuring enthalpy is of less interest because the fluid is expected to be single-phase liquid water. However, the foundation of the device was the measurement of chloride ion concentration, which could form the basis for a direct measurement of inflow from fractures. During the 2017 project, this novel chloride sensing system was implemented into a laboratory test instrument, and we confirmed the capability of the system to measure the ion concentration of fluid entering a model wellbore through a small entry port. The wellbore was a 6-inch diameter model well, and the port was approximately 0.08 inch (2mm) in diameter. The device could measure the chloride concentration accurately even when the well was flowing in a bubbly flow. Given its accuracy, the tool should be able to identify locations of water entering the wellbore even if the ion concentration differs only slightly from that of the water in the well. It is likely that different fractures may flow slightly different chloride concentrations, which would make it feasible to detect individual fractures as well as to estimate the volume of their flow. Ultimately, we could also recognize different fractures flowing back significantly different ion concentrations after fracturing in the FORGE wells. This could be realized by adding different ions in the fracturing fluids in different fractures created at different stages of stimulation (and modifying the tool to include different ion specificity). Sandia’s tool was shown during the study to have the capability to withstand the 225°C temperature, and the electrochemical sensing elements were tested in the laboratory to 225°C at 1500 psia for 24 hours. An early implementation of the fully integrated downhole electrochemical tool, including high-temperature electronics, robust housing, and wireline truck interface, had previously been constructed and tested successfully at Sandia; thus, hardware development tasks focused on advancing the technology readiness level (TRL) of this promising technology for FORGE deployment, rather than on developing a new scientific basis for its operation. The data collection electronics in this tool allowed for several other sensors (pressure, temperature, flow spinner) to be implemented in parallel as well. The research was a new collaboration between Stanford and Sandia to modify and refine the tool for FORGE deployment, to make the downhole measurements, and to characterize the evolving fractures.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

Using AMReX's Embedded Boundaries to Support MFIX-Exa’s Geometry Capabilities

MFIX-Exa is an AMReX-based application used for the simulation of chemically reacting multiphase flows inside reactors. The reactor geometry is mostly a combination of primitive shapes such as cylinders, cubes and spheres of varying dimensions connected together with potentially a lot of dead space between them. Additionally, the reactors may have particle-laden jets introduced at different parts of their geometry to enhance reactant mixing. This talk presents how MFIX-Exa uses OpenSCAD’s csg format to allow users to define the embedded boundary (EB) geometry and how it supports specifying inflow through certain sections of the EB. The talk will describe how MFIX-Exa leverages the EB features of grid-pruning, restart files and redistribution. Finally, the talk goes over some capabilities which are currently not available in MFIX-Exa but planned for the future, such as moving parts of the reactor geometry.

embedded boundaries↗
DOE OSTI2025

Multiscale modeling and laser diagnostics to reveal non-equilibrium reaction chemistry at a plasma-liquid interface

Low-temperature, atmospheric-pressure plasmas in contact with liquid are at the core of a wide range of applications including water treatment, medicine, materials synthesis, and chemical transformation. In general, plasma-liquid processes are scientifically compelling because reactivity can be produced without a catalyst, in relatively inert molecules, such as air or nitrogen and liquid water, in their native states at ambient conditions. However, reactions at a plasma-liquid interface are extremely complex, occurring at a multiphase, gas-liquid boundary where excited or dissociate gaseous species dissolve and react with solution-phase species, and unique reaction pathways are induced by non-equilibrium chemistry. In particular, detailed knowledge of the physical and chemical processes, including what species are produced in the gas phase and how these species are subsequently transported across and react near the interfacial region, remains largely unanswered. In this project, modeling of the non-equilibrium reaction chemistry at the interface of low-temperature, atmospheric-pressure plasmas and liquid water is developed, supported by advanced laser diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Ab initio equation of state for vanadium

Accurate materials’ equations of state (EOS) are essential for understanding materials properties as well as for use in multiphysics simulations. In particular, hydrodynamics simulations are based on three fundamental conservation laws (mass, momentum and energy) that form an under-determined system of equations. The equation of state serves as an additional closure relation between thermodynamic variables for a given material that enables numerical hydrodynamics simulation. In this report, we focus on the development of an ab initio EOS for the body centered cubic (BCC) phase of Vanadium (V) for eventual integration into a multiphase EOS in the OpenSesame EOS database.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Initial Demonstration of Peregrine in VERA-CS

This milestone demonstrates integration of the MOOSE-based Peregrine fuel performance code into the CASL Virtual Environment for Reactor Analysis (VERA). Specifically targeted at VERA’s core simulator functionality (VERA-CS), the existing VERA subchannel-neutronics capability based on COBRA-TF (CTF) and Insilico was extended to use the axisymmetric 2D R-Z fuel rod modeling functionality of PEREGINE to replace the simple fuel rod model in CTF. This three-way coupling involved defining and implementing data interfaces, software infrastructure development to support the requirements of each code, and numerical methods to implement the coupled physics. The result is a new VERA capability known as Tiamat. Development of Tiamat required extensions to the VERA build system to support a “meta build” that uses the MOOSE/libMesh/Peregrine native build system, development of a new driver layer designed to support long-term CASL code integration requirements, and implementation of data transfers for the coupled applications using the DataTransferKit (DTK). Peregrine is now compiled and tested under the VERA continuous integration server. Tiamat, a new advanced simulation tool consisting of three coupled codes - CTF for multiphase subchannel flow, Insilico for neutronics and Peregrine for fuels performance - has been developed. Tiamat was used to simulate a 17x17 assembly model for Watts Bar Unit 1 Cycle 1, which exceeds the goals of this milestone.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2014

Integrated Lift- and Wall-Force Closures in Computational Fluid Dynamics (CMFD)

In this report, we provide the necessary background to put this work in context and for a more detailed background, the reader is referred to CASL 2013 report. Central constraints on the design of LWRs are thermal-structural limits, e.g., maximum fuel pin temperature and maximum allowable working pressure in a pressure vessel. In both of these cases, the knowledge of the spatially and temporally varying two-phase flow is required to make accurate predictions as the distribution of both the phases have an impact on heat extraction as well as neutron moderation. Engineered two-phase flow systems have complex geometry and often high Reynolds numbers which increase the computational cost of an analysis, and generally make direct numerical simulations of the flow field impossible even on the fastest computers today. Consequently, a number of models which seek to reduce this computational cost have been created over the years. One of these called the two-fluid model has become the standard in three dimensional CFD (Computational Fluid Dynamics) codes and is and is also referred to as CMFD (Computational Multiphase Fluid Dynamics). The two-fluid model splits each conserved quantity into two fields, one for each phase that is treated as interspersed continua. Splitting one field into two requires additional interfacial closure relationships. In the two-fluid model, the momentum flux between the phases is governed by a number of these closure relationships. Generally, the net force on the dispersed phase is decomposed into inertial, added mass, buoyancy, drag, lift, and wall forces. In addition, there is a time-dependent Basset force, as well as turbulent dispersion effects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Time-, space-, and molecule-resolved multiple plasma reactive species in complex settings using an innovative approach of cavity ringdown spectroscopy (Project Final Report)

The primary research goal of this 2-year project is to demonstrate the feasibility of an innovative approach to measure reactive plasma species in the most challenging settings: right on the surface of water and under water. We propose to use the Brewster angle-cavity ringdown spextroscopy (BA-CRDS). Research objectives include: 1) Measurements of OH and NO in the plasma gas-phase zone (Z1) using different types of LTP sources including continuous and pulsed plasma jets, sheets, torches, etc. 2) Measurements of OH and NO in the multiphase reaction zones, right on the surface of water (Z2) and under water (Z3). 3) RS formation and loss mechanisms and reaction dynamics in the three zones. 4) Generalization of the proposed system to be configurable with other selected innovative techniques for other LTP parameters; invitation of selected PIs to form a strong collaborative team to pursue the follow-up effort (Category-2).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Assessment and Improvement Proposals for High-Pressure Rinsing Processes during Cleanroom Preparation of Superconducting Radio-Frequency Cavities for Particle Accelerators

The goal of this internship is to develop a fluid dynamics characterization of the high-pressure flow used for cleaning the internal surface of the SRF cavities. Initially, the High Pressure Rinsing (HPR) process is introduced, focusing on the problems of the SRF cavities and how this method can be used to increase their acceleration efficiency and performance. The characterization of the problem is then presented, including an introduction to the multiphase flow modeling and the analysis of the Fermilab facility for the HPR. To accomplish the goal, a preliminary estimation of the variables was performed using MATLAB. Then, multiple 2D simulations were developed with Ansys Fluent, and the influence of the main parameter was investigated. The simulation results are then presented and analysed, with a focus on the possible future developments of the HPR process fluid dynamic characterization.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Two-Way Coupled CFD/DEM Simulation of Electromagnetic Heating in a Fluidized Bed Reactor

A set of tools has been developed to couple a multiphase reacting computational fluid dynamics solver (MFIX) with two computational electromagnetic solvers (COMSOL and Elmer). In contrast to several recent investigations, which calculate a single static EM field prior to the CFD calculation, in the present work the electromagnetic field is periodically updated during the simulation. This enables the EM field and associated EM heating predictions to reflect the effects of evolving material properties (temperature, composition, size etc.) and the evolving distribution of material in the system. The present work uses effective medium theory (EMT) for the electromagnetic field calculations since the goal is to apply the tool for industrial scale reacting systems. Predictions using MFIX/COMSOL and MFIX/Elmer are compared to in bed thermocouple measurements from a fluidized bed experiment and recent simulation predictions and recent experiments performed at NETL. The NETL experiments also include packed bed operating conditions. Coupled MFIX/COMSOL simulations at these conditions are compared with similar simulations using only COMSOL to measure errors due to the solver coupling approach.

CFD↗
DOE OSTI2026

Onset of Fluidization in MP-PIC Simulations using MFIX-Exa

Fluidized bed reactors are used across a variety of industries, including for energy processes like pyrolysis that result in low-cost energy products. Design and scale-up of fluidized beds is de-risked by modeling and simulation, utilizing tools like NETL’s MFIX-Exa High-Performance Computing (HPC) code for reacting multiphase flow. This report summarizes an investigation into the breadth of problems to which MFIX-Exa may be applied, specifically with regard to low fluid velocities and the onset of fluidization. A simple fluidization study is conducted both experimentally and numerically for particles of interest, then reactor simulations are compared to cold flow experiments for uniform distributor plates. Approaches for modeling bubble caps are also presented.

discrete particle method↗
DOE OSTI2026

SAM Code Enhancements for Fission Product Tracking of Noble Gases and Metals in MSRs

This report documents fiscal year 2026 enhancements to the System Analysis Module (SAM) for modeling fission product transport in liquid-fueled molten salt reactors (MSRs). The work advances three principal areas: noble gas transport, noble metal deposition, and user interface improvements. The noble gas transport capability integrates drift-flux gas transport, Henry’s law two-film interphase mass transfer with pressure-based nucleation suppression, Knudsen-regime pore diffusion into porous graphite with a conjugate salt-graphite interface constraint, built-in material properties, five Sherwood-number mass transfer correlations including three derived from high-fidelity NekRS simulations, and xenon-135 reactivity feedback through SAM’s point-kinetics model. This work also presents a comprehensive verification test suite, including new analytically verified cases for pressure-dependent onset of interphase gas transfer in a stagnant vertical pipe, a postulated FLiBe-graphite Xe extraction permeator, a gravity riser with a fission-product source, and a descending pipe with gas redissolution driven by hydrostatic pressure. A machine learning framework for bubble rise velocity prediction in molten salt systems is developed and benchmarked on molten-salt and diverse aqueous bubble datasets. The best-performing fine-tuned transfer-learning networks achieve an 82% reduction in RMSE relative to the Clift correlation, and is implemented directly in SAM. The noble metal transport capability is developed, including a liquid-wall deposition model and a gas-surface flotation mechanism that transfers insoluble particles entrained by sparging gas to wetted structures. Verification tests and demonstration cases cover the surface deposition, flotation efflux, and flotation shedding. Finally, a new [SpeciesTransport] input structure replaces positional global vectors with selfcontained, order-independent, named species blocks, simplifies the specification of multiphase species and decay chains, and remains fully compatible with existing SAM input files. Together, these developments improve the physical fidelity, verification basis, and usability of SAM for system-level analyses of fissionproduct behavior in MSRs.

Mui, Travis (ORCID:0000000303736470)↗
DOE OSTI1989

Nuclear Safety [Vol. 30, No. 3, July-September 1989]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 325 Safety of Framatome Advanced Nuclear Steam Supply Systems Designs by J. A. Charles and D. Lange, 333 Book Review of Nuclear Accidents: Intervention Levels for the Protection of the Public by H. B. Piper; ACCIDENT ANALYSIS: 335 Living PRA Computer Systems by S. C. Dinsmore and H.-P. Balfanz, 343 Summary of ICAP Assessments of RELAP5/MOD2 by W. E. Driskell and R. G. Hanson; CONTROL AND INSTRUMENTATION: 352 Thermal Performance Monitoring System at Maanshan Nuclear Power Plant by H.-J. Chao, Y.-P. Lin, G.-H. Jou, L.-Y. Liao, and Y.-B. Chen; DESIGN FEATURES: 358 Warning Systems for Nuclear Power Plant Emergencies by J. H. Sorensen and D. S. Mileti; WASTE AND SPENT FUEL MANAGEMENT: 371 Activities Related to Waste Management Compiled by E G. Silver; OPERATING EXPERIENCES: 382 Steam Generator Tube Performance: Experience with Water-Cooled Nuclear Power Reactors During 1985 by O. S. Tatone and R. L. Tapping, 400 Systems Interaction Analyses: Concepts and Techniques (Part II) by M. D. Muhlheim and G. A. Murphy, 413 Reactor Shutdown Experience Compiled by J. W. Cletcher, 416 Operating U.S. Power Reactors Compiled by E G. Silver; RECENT DEVELOPMENTS: 440 General Administrative Activities Compiled by E G. Silver, 460 Reports, Standards, and Safety Guides by D. S. Queener, 466 Status of Power-Reactor Licensing Activities Compiled by E G. Silver, 470 Proposed Rule Changes as of Mar. 31, 1989; ANNOUNCEMENTS: 334 Proceedings Published, 351 CEC Seminar on Methods and Codes for Assessing the Off-Site Consequences of Nuclear Accidents, 357 Short Course on Multiphase Flow and Heat Transfer: Bases and Applications in A: The Nuclear Power Industry B: The Process Industries, 357 International Conference on Probabilistic Safety Assessment and Management, 478 International Topical Meeting on the Safety, Status, and Future of Non-Commercial Reactors and Irradiation Facilities, 475 The Authors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Agglomerate Sizing in Aluminized Propellants Using Digital Inline Holography and Traditional Diagnostics

Aluminized ammonium perchlorate composite propellants can form large molten agglomerated particles that may result in poor combustion performance, slag accumulation, and increased two-phase flow losses. Quantifying agglomerate size distributions are needed to gain an understanding of agglomeration dynamics and ultimately design new propellants for improved performance. Due to complexities of the reacting multiphase environment, agglomerate size diagnostics are difficult and measurement accuracies are poorly understood. To address this, the current paper compares three agglomerate sizing techniques applied to two propellant formulations. Particle collection on a quench plate and backlit videography are two relatively common techniques, whereas digital inline holography is an emerging alternative for three-dimensional measurements. Atmospheric pressure combustion results show that all three techniques are able to capture the qualitative trends; however, significant differences exist in the quantitative size distributions and mean diameters. For digital inline holography, methods are proposed that combine temporally resolved high-speed recording with lower-speed but higher spatial resolution measurements to correct for size–velocity correlation biases while extending the measurable size dynamic range. Finally, the results from this work provide new guidance for improved agglomerate size measurements along with statistically resolved datasets for validation of agglomerate models.

42 ENGINEERING↗