Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mathematical Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Computational fluid dynamics modeling of chemical looping combustion process with calcium sulphate oxygen carrier - article no. A19

To concentrate CO{sub 2} in combustion processes by efficient and energy-saving ways is a first and very important step for its sequestration. Chemical looping combustion (CLC) could easily achieve this goal. A chemical-looping combustion system consists of a fuel reactor and an air reactor. Two reactors in the form of interconnected fluidized beds are used in the process: (1) a fuel reactor where the oxygen carrier is reduced by reaction with the fuel, and (2) an air reactor where the reduced oxygen carrier from the fuel reactor is oxidized with air. The outlet gas from the fuel reactor consists of CO{sub 2} and H{sub 2}O, while the outlet gas stream from the air reactor contains only N{sub 2} and some unused O{sub 2}. The water in combustion products can be easily removed by condensation and pure carbon dioxide is obtained without any loss of energy for separation. Until now, there is little literature about mathematical modeling of chemical-looping combustion using the computational fluid dynamics (CFD) approach. In this work, the reaction kinetic model of the fuel reactor (CaSO{sub 4}+ H{sub 2}) is developed by means of the commercial code FLUENT and the effects of partial pressure of H{sub 2} (concentration of H{sub 2}) on chemical looping combustion performance are also studied. The results show that the concentration of H{sub 2} could enhance the CLC performance.

01 COAL, LIGNITE, AND PEAT↗

The Decarburization Kinetics of Metal Droplets in Emulsion Zone

Abstract:: A mathematical model has been developed to predict the decarburization rate within individual droplets in the emulsion zone. All the chronological events pertaining to the life cycle of a metal droplet in the emulsion zone like oxygen supply (from slag), external and internal decarburization have been modeled dynamically and validated against experimental data available in open literature. The bloating behavior of metal droplets in the emulsion was represented theoretically by incorporating an escape function dependent on internal CO gas generation. The model is able to predict the onset of bloating and the residence time of metal droplets in the emulsion zone. The residence time of droplet containing 2.6 wt pct C and 0.007 wt pct S is in the range of 10 to 13 seconds. The contribution of decarburization rate in the emulsion zone to the overall decarburization rate is studied using the industrial data reported by Cicutti et al. The model predicts 5 to 75 pct of total decarburization takes place in the emulsion zone. It is found that the extent of decarburization of a metal droplet depends on its initial carbon content rather than its oxygen content for slag containing FeO greater than 10 wt pct.

36 MATERIALS SCIENCE↗

In-situ Investigation of Vanadium Ion Transport in Redox Flow Battery

We will show a new method to differentiate the vanadium transport from concentration gradient and that from electric field. Flow batteries with vanadium and iron redox couples as the electro-active species were employed to investigate the transport behavior of vanadium ions in the presence of electric field. It was shown that electric field accelerated the positive-to-negative and reduced the negative-to-positive vanadium ions transport in charge process and affected the vanadium ions transport in an opposite way in discharge process. In addition, a method was designed to differentiate the concentration gradient-driven vanadium ions diffusion and electric field-driven vanadium ions migration. Simplified mathematical model was established to simulate the vanadium ions transport in real charge-discharge operation of flow battery. The concentration gradient diffusion coefficients and electric-migration coefficients of V2+, V3+, VO2+, and VO2+ across Nafion membrane were obtained by fitting the experimental data.

25 ENERGY STORAGE↗

Dynamics of Synchronous Hydromechanical Drive in Mobile Machine

A mathematical model of the synchronous hydromechanical drive in a mobile machine with a flux divider of choke type is developed on the basis of the theory of the stiffness of a hydraulic system. To obtain the best dynamic characteristics of the system, the properties of the flow divider must be strictly consistent with the dynamic properties of the system.

42 ENGINEERING↗

Three-Layer Cylindrical Shell with Nonlinear Deformation

A mathematical model is proposed for the stress–strain state of a three-layer (sandwich) structure, taking account of nonlinear deformation of the supporting layers. Nonlinear deformation of a symmetric three-layer cylindrical shell under the action of transverse loads is considered, for different boundary conditions.

42 ENGINEERING↗

Research needs for material mixing at extremes: workshop overview & charge

Workshop goals are: (1) Raise the general awareness of material mixing problems in extreme conditions; (2) Peer into the future (15 years) for mixing experiments/diagnostics, theory/modeling and simulation/predictions in relation to material mixing; (3) Identify priority research directions, capability opportunities (especially with respect to MaRIE), and projected capability needs (not just MaRIE); and (4) The production of a MaRIE report, a peer reviewed journal paper, and a proposal for a decadal study. The last 25 years has seen substantial progress with understanding material mixing in low energy environments, particularly with the development of high fidelity experimental multi-probe diagnostics, direct numerical simulations, and science based theories and mathematical models. We now need to move such advances to the high energy environment with a goal to increase our understanding and predictability, and raise our confidence in scientifically informed decision making. Thus, this workshop is charged to look to the future ({approx} 15 years), and explore opportunities to advance our current understanding of material mixing in extreme conditions.

99 GENERAL AND MISCELLANEOUS↗

Movement simulation of the variable masses in the Gylden-Meshcherskii problem

The Gylden-Meshcherskii problem is used for various cases of dynamics of two points of the variable mass. For example, it describes of double star evolution due to mass loss at the photon expense and the corpuscular activity. Except, it is mathematical model for the movement of spacecraft with propulsion system. In the present work the mass variation laws, allowing a stationary form of the movement differential equations are considered. Movement simulation for all cases was conducted. The relative movement trajectories was constructed as for known Eddington-Jeans laws and for other mass variation laws.

79 ASTRONOMY AND ASTROPHYSICS↗

Thickness measurement system for transparent plates using dual digital versatile disc (DVD) pickups

A low-cost high-precision thickness measurement system for transparent plates that uses dual digital versatile disc (DVD) pickups is proposed. The two DVD pickups are used as the transmitter and the receiver in the measurement system, respectively. One of the DVD pickups emits a laser to the other DVD pickup (receiver) and projects on the photodiode integrated circuit of the receiver. The transparent plate is placed in the optical path to change the focused point that will affect the focusing error signal (FES) of the receiver. Using the FES, a mathematical model for thickness measurement based on the geometric optical method is developed. The experimental results show that the accuracy is 1.5 {mu}m, and the uncertainty is estimated to be {+-}1.37 {mu}m for the measured thickness of 150{mu}m.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of the influence of the parameters of an experiment on the simulation of pole figures of polycrystalline materials using electron microscopy

A two-dimensional mathematical model of a polycrystalline sample and an experiment on electron backscattering diffraction (EBSD) is considered. The measurement parameters are taken to be the scanning step and threshold grain-boundary angle. Discrete pole figures for materials with hexagonal symmetry have been calculated based on the results of the model experiment. Discrete and smoothed (by the kernel method) pole figures of the model sample and the samples in the model experiment are compared using homogeneity criterion χ{sup 2}, an estimate of the pole figure maximum and its coordinate, a deviation of the pole figures of the model in the experiment from the sample in the space of L{sub 1} measurable functions, and the RP-criterion for estimating the pole figure errors. Is is shown that the problem of calculating pole figures is ill-posed and their determination with respect to measurement parameters is not reliable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of memory in non-genetic inheritance and its impact on cancer treatment resistance

Intra-tumour heterogeneity is a leading cause of treatment failure and disease progression in cancer. While genetic mutations have long been accepted as a primary mechanism of generating this heterogeneity, the role of phenotypic plasticity is becoming increasingly apparent as a driver of intra-tumour heterogeneity. Consequently, understanding the role of this plasticity in treatment resistance and failure is a key component of improving cancer therapy. We develop a mathematical model of stochastic phenotype switching that tracks the evolution of drug-sensitive and drug-tolerant subpopulations to clarify the role of phenotype switching on population growth rates and tumour persistence. By including cytotoxic therapy in the model, we show that, depending on the strategy of the drug-tolerant subpopulation, stochastic phenotype switching can lead to either transient or permanent drug resistance. We study the role of phenotypic heterogeneity in a drug-resistant, genetically homogeneous population of non-small cell lung cancer cells to derive a rational treatment schedule that drives population extinction and avoids competitive release of the drug-tolerant sub-population. This model-informed therapeutic schedule results in increased treatment efficacy when compared against periodic therapy, and, most importantly, sustained tumour decay without the development of resistance.

60 APPLIED LIFE SCIENCES↗

Drawing of Hardening Materials with Radial-Matrix Clamping

A mathematical model is developed for the drawing of an anisotropic hardening material without wall thinning, in the case of radial-matrix clamping. For sheets of various materials, the forces required and the associated damage are investigated as a function of the drawing coefficient, the rounding radius of the matrix, the frictional conditions at tool–workpiece contact, and the clamping materials.

42 ENGINEERING↗

Structural, optical, and current investigations of superlattices with a complex AlGaAs-based unit cell

The results of complex analysis of the parameters of the GaAs/AlGaAs semiconductor superlattice with a complex unit cell using mathematical modeling and experimental methods of transmission electron microscopy, energy-dispersive analysis, and spectroscopy of photoluminescence and photocurrent are presented. Suppression of the intraband static negative differential conductivity under strong interaction conditions between minibands and the inharmonic electron-dispersion law is shown.

36 MATERIALS SCIENCE↗

Synthetic Biology Outside the Cell: Linking Computational Tools to Cell-Free Systems

As mathematical models become more commonly integrated into the study of biology, a common language for describing biological processes is manifesting. Many tools have emerged for the simulation of in vivo synthetic biological systems, with only a few examples of prominent work done on predicting the dynamics of cell-free synthetic systems. At the same time, experimental biologists have begun to study dynamics of in vitro systems encapsulated by amphiphilic molecules, opening the door for the development of a new generation of biomimetic systems. In this review, we explore both in vivo and in vitro models of biochemical networks with a special focus on tools that could be applied to the construction of cell-free expression systems. We believe that quantitative studies of complex cellular mechanisms and pathways in synthetic systems can yield important insights into what makes cells different from conventional chemical systems.

60 APPLIED LIFE SCIENCES↗

Uptake of uranium from seawater by amidoxime-based polymeric adsorbent marine testing

Amidoxime-based polymer adsorbents in the form of functionalized fibers were prepared at the Oak Ridge National Laboratory (ORNL) and screened in laboratory experiments, in terms of uranium uptake capacity, using spiked uranium solution and seawater samples. Batch laboratory experiments conducted with 5-gallon seawater tanks provided equilibrium information. Based on results from 5-gallon experiments, the best adsorbent was selected for field-testing of uranium adsorption from seawater. Flow-through column tests have been performed at different marine sites to investigate the uranium uptake rate and equilibrium capacity under diverse biogeochemistry. The maximum amount of uranium uptake from seawater tests at Sequim, WA, was 3.3 mg U/g adsorbent after eight weeks of contact of the adsorbent with seawater. This amount was three times higher than the maximum adsorption capacity achieved in this study by a leading adsorbent developed by the Japan Atomic Energy Agency (JAEA), which was 1.1 mg U/g adsorbent at equilibrium. The initial uranium uptake rate of the ORNL adsorbent was 2.6 times higher than that of the JAEA adsorbent under similar conditions. A mathematical model derived from the mass balance of uranium was employed to describe the data. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nanoindentation of ZrN Coatings on Silicon and Copper Substrates

An effective mathematical model is proposed to describe experiments on the indentation of samples with layered or functionally graded coatings. The model is based on the elastic contact problem corresponding to the penetration of a punch in a coated elastic half-space. A Berkovich indenter is considered. The results of the simulation and the experiments are compared for the indentation of two zirconium nitride (ZrN) coatings on substrates of monocrystalline (100) silicon and annealed copper. The agreement of the results is good.

42 ENGINEERING↗

RECOVERY ACT: DYNAMIC ENERGY CONSUMPTION MANAGEMENT OF ROUTING TELECOM AND DATA CENTERS THROUGH REAL-TIME OPTIMAL CONTROL (RTOC): Final Scientific/Technical Report

This final scientific report documents the Industrial Technology Program (ITP) Stage 2 Concept Development effort on Data Center Energy Reduction and Management Through Real-Time Optimal Control (RTOC). Society is becoming increasingly dependent on information technology systems, driving exponential growth in demand for data center processing and an insatiable appetite for energy. David Raths noted, 'A 50,000-square-foot data center uses approximately 4 megawatts of power, or the equivalent of 57 barrels of oil a day1.' The problem has become so severe that in some cases, users are giving up raw performance for a better balance between performance and energy efficiency. Historically, power systems for data centers were crudely sized to meet maximum demand. Since many servers operate at 60%-90% of maximum power while only utilizing an average of 5% to 15% of their capability, there are huge inefficiencies in the consumption and delivery of power in these data centers. The goal of the 'Recovery Act: Decreasing Data Center Energy Use through Network and Infrastructure Control' is to develop a state of the art approach for autonomously and intelligently reducing and managing data center power through real-time optimal control. Advances in microelectronics and software are enabling the opportunity to realize significant data center power savings through the implementation of autonomous power management control algorithms. The first step to realizing these savings was addressed in this study through the successful creation of a flexible and scalable mathematical model (equation) for data center behavior and the formulation of an acceptable low technical risk market introduction strategy leveraging commercial hardware and software familiar to the data center market. Follow-on Stage 3 Concept Development efforts include predictive modeling and simulation of algorithm performance, prototype demonstrations with representative data center equipment to verify requisite performance and continued commercial partnering agreement formation to ensure uninterrupted development, and deployment of the real-time optimal control algorithm. As a software implementable technique for reducing power consumption, the RTOC has two very desirable traits supporting rapid prototyping and ultimately widespread dissemination. First, very little capital is required for implementation. No major infrastructure modifications are required and there is no need to purchase expensive capital equipment. Second, the RTOC can be rolled out incrementally. Therefore, the effectiveness can be proven without a large scale initial roll out. Through the use of the Impact Projections Model provided by the DOE, monetary savings in excess of $100M in 2020 and billions by 2040 are predicted. In terms of energy savings, the model predicts a primary energy displacement of 260 trillion BTUs (33 trillion kWh), or a 50% reduction in server power consumption. The model also predicts a corresponding reduction of pollutants such as SO2 and NOx in excess of 100,000 metric tonnes assuming the RTOC is fully deployed. While additional development and prototyping is required to validate these predictions, the relative low cost and ease of implementation compared to large capital projects makes it an ideal candidate for further investigation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Some estimation problems in epidemic modeling

In the field of computer virus, a growing number of mathematical models have been published during the last decade. In this paper, we consider several estimation methods under two parametric models, the random constant scanning model and the nonhomogeneous random scanning model, to propose a comparison of the estimators’ performances based on the simulation of random populations. We conclude our work with an application of the different estimation methods to a real data set of worm propagation.

Mathematics↗

Competitive exclusion by autologous antibodies can prevent broad HIV-1 antibodies from arising

Significance Broadly neutralizing antibodies against HIV have recently been discovered, but their highly mutated nature and late emergence in infection make it difficult to infer how they arose. As a step to understanding their development, we investigate antibody–virus coevolution, using a mathematical model. Here we find that broadly neutralizing antibodies in principle may arise earlier and be less mutated, but that competition between broad responses and initial autologous antibody responses delays their emergence. It may be possible to reduce this competition and elicit broadly neutralizing antibodies earlier than previously thought by using a vaccine with diverse viral strains.

59 BASIC BIOLOGICAL SCIENCES↗