Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Materials Compatibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Development of electrical-erosion instrument for direct write micro-patterning on large area conductive thin films

We have developed a complete instrument to perform direct, dry, and cost-effective lithography on conductive materials, based on localized electrical discharges, which avoids using masks or chemicals typical of conventional photolithography. The technique is considered fully compatible with substrate transport based systems, like roll-to-roll technology. The prototype is based on two piezo nano-steppers coupled to three linear micro-stages to cover a large scale operation from micrometers to centimeters. The operation mode consists of a spring probe biased at low DC voltage with respect to a grounded conductive layer. The tip slides on the target layer keeping contact with the material in room conditions, allowing continuous electric monitoring of the process, and also real-time tilt correction via software. The sliding tip leaves an insulating path (limited by the tip diameter) along the material, enabling to draw electrically insulated tracks and pads. The physical principle of operation is based in the natural self-limitation of the discharge due to material removal or insulation. The so produced electrical discharges are very fast, in the range of μs, so features may be performed at speeds of few cm/s, enabling scalability to large areas. The instrument has been tested on different conducting materials as gold, indium tin oxide, and aluminum, allowing the fabrication of alphanumeric displays based on passive matrix of organic light emitting diodes without the use of masks or photoresists. We have verified that the highest potential is achieved on graphene, where no waste material is detected, producing excellent well defined edges. This allows manufacturing graphene micro-ribbons with a high aspect ratio up to 1200:1.

36 MATERIALS SCIENCE↗

Recent Progress in Engineering Metal Halide Perovskites for Efficient Visible‐Light‐Driven Photocatalysis

Abstract Artificial photosynthesis has attracted increasing attention due to recent environmental and energy concerns. Metal halide perovskites (MHPs) demonstrating excellent optoelectronic properties have currently emerged as novel and efficient photocatalytic materials. Herein, the structural features of MHPs that are responsible for the photoinduced charge separation and charge migration properties are briefly introduced, and then important and necessary photophysical and photochemical aspects of MHPs related to photoredox catalysis are summarized. Subsequently, the applications of MHPs for solar energy harvesting and photocatalytic conversion, including H 2 evolution, CO 2 reduction, degradation of organic pollutants, and photoredox organic synthesis, are extensively demonstrated, with a focus on strategies for improving the performance (e.g., selectivity, activity, stability, recyclability, and environmental compatibility) of these MHP‐based photocatalytic systems. To conclude, existing challenges and prospects on the future development of MHP‐based materials towards photoredox catalysis applications are detailed.

Han, Chuang↗

Factors Affecting the Stability of Matrix Materials for Actinides Transmutation and Conditioning

The minimization of the long-term radiotoxicity of high level nuclear waste is an important criterion adopted for the development of advanced fuel cycles for the new generations of nuclear reactors. Pu recycling as fuel, and transmutation of Minor Actinides (MA: Np, Am, and in some concepts also Cm) in reactors and/or MA burners are the steps considered to achieve this goal. U-free compounds are considered as matrices for Pu, MA burning. In some cases, these matrices are envisaged also for the conditioning and immobilization of radionuclides in final disposal concepts. The list of properties of a good inert matrix includes good chemical compatibility with the actinides, easy and economical processes of fabrication and, if required, reprocessing, and good thermo-mechanical performance in-pile, in terms of thermal transport, swelling and high temperature stability. In addition, the material must retain the good properties under the cumulative effect of radiation damage, and fission product accumulation. Since good radiation resistance materials usually exhibit poor thermal transport, in some concepts the actinides are stabilized in a host phase (e.g. zirconia) dispersed in a high thermal conductivity matrix (either ceramic or metallic).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Role of Electrolyte Composition in Enabling Li Metal‐Iron Fluoride Full‐Cell Batteries

Abstract FeF 3 conversion cathodes, paired with Li metal, are promising for use in next‐generation secondary batteries and offer a remarkable theoretical energy density of 1947 Wh kg −1 compared to 690 Wh kg −1 for LiNi 0.5 Mn 1.5 O 4 ; however, many successful studies on FeF 3 cathodes are performed in cells with a large (>90‐fold) excess of Li that disguises the effects of tested variables on the anode and decreases the practical energy density of the battery. Herein, it is demonstrated that for full‐cell compatibility, the electrolyte must produce both a protective solid‐electrolyte interphase and cathode‐electrolyte interphase and that an electrolyte composed of 1:1.3:3 (m/m) LiFSI, 1,2‐dimethoxyethane, and 1,1,2,2‐tetrafluoroethyl‐2,2,3,3‐tetrafluoropropyl ether fulfills both these requirements. This work demonstrates the importance of verifying electrode level solutions on the full‐cell level when developing new battery chemistries and represents the first full cell demonstration of a Li/FeF 3 cell, with both limited Li and high capacity FeF 3 utilization.

25 ENERGY STORAGE↗

Solubility and volume swell of fuel system elastomers with ketone blends of E10 gasoline and blendstock for oxygenate blending (BOB)

The compatibility of key infrastructure elastomers with five ketone molecules was assessed via solubility studies and volume swell measurements. The elastomer materials included two fluorocarbons, six acrylonitrile butadiene rubbers (NBRs), and one each of fluorosilicone, neoprene, polyurethane, styrene butadiene rubber (SBR), and silicone. The ketone molecules included acetone, 2-butanone, 2-pentanone, 2-nonanone, and cyclopentanone. The ketones were added to gasoline containing 10% ethanol (E10) and a blendstock for oxygenate blending (BOB) in levels ranging from 0% to 30% by volume. The elastomers were exposed for 4 weeks in each test fluid. The solubility was modeled using Hansen solubility parameters and the volume change was determined for each material and test fuel. In general, the volume swell increased with ketone content and corresponded well to the predicted solubilities. In most cases, the highest level of swelling occurred with added cyclopentanone and acetone, while 2-nonanone produced the lowest levels of volume expansion. The chain length of the straight ketones was found to affect the volume swell behavior as volume expansion decreased with increasing chain length. This behavior is attributed to the reduction in polarity and hydrogen bonding with chain length. Neoprene, SBR, and silicone exhibited poor compatibility with the ketone molecules at all blend levels. Fluorocarbon and fluorosilicone also showed poor compatibility but may be suitable for use as static seals in very low blend levels with 2-nonanone. The results were more mixed for polyurethane and the NBRs. In general, better compatibility (low volume swell) was observed for mixtures containing BOB than for E10. This is due to the lower polarity and hydrogen bonding of the BOB.

10 SYNTHETIC FUELS↗

Epitaxial wurtzite-MgZnO barrier based magnetic tunnel junctions deposited on a metallic ferromagnetic electrode

An epitaxial wurtzite (WZ) Mg{sub 0.23}Zn{sub 0.77}O barrier based magnetic tunnel junction (MTJ), with electrode-barrier structure of Co{sub 0.30}Pt{sub 0.70} (111)/Mg{sub 0.23}Zn{sub 0.77}O (0001)/Co (0001), was fabricated. The good crystallinity and tunneling properties were experimentally confirmed. Electrical and magnetic investigations demonstrated its high resistance-area product of 1.05 MΩ μm{sup 2}, a maximum tunneling magneto-resistance (TMR) of 35.5%, and the existence of localized states within the tunneling barrier producing TMR rapid decrease and oscillation when increasing the applied bias voltage. The TMR value almost vanished at 200 K, which was attributed to the induced moment and strong spin-orbit coupling in Pt atoms at the Co{sub 0.30}Pt{sub 0.70}/Mg{sub 0.23}Zn{sub 0.77}O interface. Owing to the ferroelectric behavior in WZ-MgZnO materials, the fabrication of WZ-MgZnO barrier based MTJs deposited on a metallic ferromagnetic electrode will open routes for electrically controllable non-volatile devices that are compatible with CMOS technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-accelerated corrosion of nuclear waste forms at material interfaces

The US plan for high-level nuclear waste includes the immobilization of long-lived radionuclides in glass or ceramic waste forms in stainless-steel canisters for disposal in deep geological repositories. Here we report that, under simulated repository conditions, corrosion could be significantly accelerated at the interfaces of different barrier materials, which has not been considered in the current safety and performance assessment models. Severe localized corrosion was found at the interfaces between stainless steel and a model nuclear waste glass and between stainless steel and a ceramic waste form. The accelerated corrosion can be attributed to changes of solution chemistry and local acidity/alkalinity within a confined space, which significantly alter the corrosion of both the waste-form materials and the metallic canisters. The corrosion that is accelerated by the interface interaction between dissimilar materials could profoundly impact the service life of the nuclear waste packages, which, therefore, should be carefully considered when evaluating the performance of waste forms and their packages. Moreover, compatible barriers should be selected to further optimize the performance of the geological repository system.

Guo, Xiaolei↗

Liquid-oxygen compatible, flame-resistant coating.

Polychloroprene rubber composition, using commercially available components, exhibits superior extrusion and durability and is highly flame and corrosion resistant. Material experiences major applications in fields of aeronautics and safety.

Bright, C. W.↗

Long term compatability of hydrazine with metals: Results at the ten-year milestone

A test program to establish the effects of long term contact of materials with hydrazine for the purpose of designing chemical propulsion system components which can be used for current as well as future planetary spacecraft was analyzed. Materials included the following: aluminum alloys, corrosion resistant steels, and a titanium alloy. Material ratings relative to the 10 year milepost are assigned. The propellant was found to be stable. With minor exceptions, the materials tested were rated acceptable for a 10 year mission.

Moran, C. M.↗

Design rules for 316H nuclear components cladded with nickel or tungsten

The existing Class A metallic materials qualified in the ASME Boiler & Pressure Vessel Code Section III, Division 5 rules for high temperature nuclear reactors are not ideally suited for long term molten salt corrosion resistance in high temperature molten salt reactors. Potentially, corrosion or corrosion driven environmentally assisted cracking could limit the design life of structural components in molten salt reactors. A solution to this limitation is the use of cladded components – overlay the Class A material with a thin layer of some non-qualified, corrosion-resistant material. However, this necessitates the development of design methods for cladded components that do not require long-term testing of clad materials in order to support the near-term deployment of molten salt reactors. This report develops such a methodology along with a complete set of rules presented in a format compatible with an ASME nuclear Code Case. These design rules are for 316H Class A components cladded with either nickel or tungsten. The report also discusses the development of a set of general criteria for selecting clad materials beyond the specific 316H/tungsten and 316H/nickel systems and general acceptance tests for checking the mechanical integrity of the clad/base metal interface. Finally, the report includes a set of fully-documented sample problems detailing the application of the rules to high temperature cladded components

36 MATERIALS SCIENCE↗

CO 2 –Based Dual–Tone Resists for Electron Beam Lithography

The increasing global environmental and energy crisis has urgently motivated the advancement of sustainable materials. Significant effort has been focused on developing new materials to replace the fossil-based resists in the semiconductor industry based on greener sources such as ice, dry ice, small organic molecules, and proteins. Such resist materials, however, have yet to meet the stringent requirements of high sensitivity, high resolution, reliable repeatability, and good compatibility with the current protocols. To this end, CO 2 -based polycarbonates (CO 2 -PCs) obtained from the copolymerization of CO 2 and epoxides are demonstrated as sustainable dual-tone (positive & negative tone) resists for electron beam lithography. By adjusting the chemical structure, developing agent, and molecular weight, the CO 2 -PCs present high sensitivities to electron beam (1.3/120 μC cm -2 ), narrow critical dimensions (29/58 nm), and moderate line edge roughness (4.6/26.7 nm) for negative and positive resists, respectively. Here, a deep understanding of the exposure mechanism of CO 2 -PC resists is provided on the basis of the Fourier transform infrared, Raman, and electron ionization mass spectroscopy. 2D photonic crystal devices are fabricated using the negative and positive CO 2 -PC resists, respectively, and both devices show distinct colors derived from their well-defined nanostructures, indicating the great practical potential of CO 2 -derived electron beam resists.

nanofabrication↗

A high-performance organic cathode customized for sulfide-based all-solid-state batteries

All-solid-state batteries (ASSBs) have become increasingly attractive recently due to their better safety and prospective long-term stability compared with conventional liquid batteries. However, obtaining a sustainable cathode candidate to match the solid electrolyte with regards to operating potential, chemical compatibility, and mechanical property is still an open challenge. In this work, the chemical incompatibility of quinone-based active materials and sulfide-based electrolyte were unveiled for the first time through a heteroconjugate addition reaction mechanism. To develop a quinone cathode customized for sulfide-based ASSBs, poly-(anthraquinonyl sulfide)-graphene (PAQS-G) nanocomposite was reported. The stable polymer framework of PAQS can protect the quinone redox center by preventing nucleophilic attack from sulfide-based solid electrolytes. The graphene additives can ameliorate redox kinetics and improve active material utilization. The PAQS-G cathode exhibited a specific capacity of ~178 mAh g -1 and a high material utilization of ~79%. Excellent cycling stability was achieved with 94 % capacity after 200 cycles in lithium batteries and 95.5 % capacity after 300 cycles in sodium batteries at 0.1C rate, respectively. A promising potential for energy storage applications was demonstrated.

25 ENERGY STORAGE↗

Tuning nanoparticle size for enhanced functionality in perovskite thin films deposited by metal organic deposition

Because of pressing global environmental challenges, focus has been placed on materials for efficient energy use, and this has triggered the search for nanostructural modification methods to improve performance. Achieving a high density of tunable-sized second-phase nanoparticles while ensuring the matrix remains intact is a long-sought goal. In this paper, we present an effective, scalable method to achieve this goal using metal organic deposition in a perovskite system REBa 2 Cu 3 O 7 (rare earth (RE)) that enhances the superconducting properties to surpass that of previous achievements. We present two industrially compatible routes to tune the nanoparticle size by controlling diffusion during the nanoparticle formation stage by selecting the second-phase material and modulating the precursor composition spatially. Combining these routes leads to an extremely high density (8 × 10 22 m -3 ) of small nanoparticles (7 nm) that increase critical currents and reduce detrimental effects of thermal fluctuations at all magnetic field strengths and temperatures. This method can be directly applied to other perovskite materials where nanoparticle addition is beneficial.

36 MATERIALS SCIENCE↗

Identification of Critical Process Parameters for Knife Milling and Alternative Communication Strategies

An assessment of knife milling operations was performed to identify parameters that require consideration to model wear and degradation of knife blades. A quality-by-design (QbD) paradigm was followed to identify material and feedstock attributes, and processing parameters that impact the quality attributes of the blades used in the comminution of biomass into forms compatible with downstream operations. Based on analytical and experimental observations of knife and tool wear, a QbD model is proposed that considers three wear mechanisms (erosion, abrasion, and gouging) to predict volumetric wear of knife blades and sharpness. These factors, if properly applied, provide a science-based approach to predict the mechanical efficiency of the mill as a function of feedstock properties, knife blade material properties, and processing parameters (feed rate, speed, and design parameters).

09 BIOMASS FUELS↗

Wafer integrated micro‐scale concentrating photovoltaics

Abstract A novel micro‐scale photovoltaic concept, Wafer Integrated Micro‐scale Photovoltaics (WPV), is proposed, analyzed, and experimentally demonstrated. The WPV concept seamlessly integrates multijunction micro‐cells with a multi‐functional silicon platform that simultaneously provides optical concentration, hybrid PV/CPV architecture, and mechanical alignment features. Fabrication and optical performance characterization of the Si platform are described in this paper. Over 100% improvement in the concentration‐acceptance‐angle product ( CAP ) is demonstrated using the wafer‐embedded micro‐concentrating elements, leading to significantly reduced module material and fabrication costs, sufficient angular tolerance for low‐cost trackers, and an ultra‐compact optical architecture compatible with commercial flat panel infrastructures. The development of a prototypical module with a 400× concentration ratio is described. Outdoor optical characterization of the module shows acceptance angles of ±1.7° and ±2.5° for 90% of on‐axis power and full‐width‐half‐maximum, respectively. The projected performance of the PV/CPV hybrid architecture illustrates its potential for cost‐effective collection of both direct and diffuse sunlight, thereby extending the geographic and market domains for cost‐effective PV system deployment. Leveraging low‐cost micro‐fabrication and high‐level integration techniques, the WPV approach presents a promising route to combine the high performance of multijunction solar cells and the low costs of flat‐plate Si PV systems.

Li, Duanhui↗

Aqueous vs. nonaqueous Zn-ion batteries: consequences of the desolvation penalty at the interface

Zinc ion batteries using metallic zinc as the negative electrode have gained considerable interest for electrochemical energy storage, whose development is crucial for the adoption of renewable energy technologies, as zinc has a very high volumetric capacity (5845 mA h cm -3 ), is inexpensive and compatible with aqueous electrolytes. However, the divalent charge of zinc ions, which restricts the choice of host material due to hindered solid-state diffusion, can also pose a problem for interfacial charge transfer. We report our findings on reversible intercalation of up to two Zn 2+ ions in layered V 3 O 7 ·H 2 O. This material exhibits very high capacity and power (375 mA h g -1 at a 1C rate, and 275 mA h g -1 at an 8C rate) in an aqueous electrolyte compared to a very low capacity and slow rate capabilities in a nonaqueous medium. Operando XRD studies, together with impedance analysis, reveal solid solution behavior associated with Zn 2+ -ion diffusion within a water monolayer in the interlayer gap in both systems, but very sluggish interfacial charge transfer in the nonaqueous electrolyte. This points to desolvation at the interface as a major factor in dictating the kinetics. Temperature dependent impedance studies show high activation energies associated with the nonaqueous charge transfer process, identifying the origin of poor electrochemical performance.

25 ENERGY STORAGE↗

The nature and suppression strategies of interfacial reactions in all-solid-state batteries

Solid-state Li batteries are promising energy storage devices owing to their high safety and high theoretical energy density. However, the serious interfacial reaction between solid state electrolytes and cathodes deteriorates the battery performance, impeding the realization of long-term cyclability. The buried nature of the interphase layer presents a significant challenge in achieving a comprehensive understanding of the underlying interfacial reaction mechanisms. Herein, we systematically explore the interfacial reaction evolutions and interphase compositions and electronic properties between the popular oxide cathodes and sulfide solid electrolytes (SSEs). This includes analysis of the chemical and electrochemical reactions between cathodes/coatings and SSEs, as well as the electrochemical self-decomposition of SSEs by thermodynamic phase equilibrium analysis. Herein, we disclose that the driving force of the electrochemical reaction at the chemical potential of μ Li is much stronger than that of the chemical reaction, which dominates the interfacial reaction. Preventing the formation of an electronically conductive interphase is crucial in inhibiting the continuous interfacial degradation during long-term cycling, which can be achieved through the optimized combination of cathodes and SSEs, as well as the introduction of functional coatings between them. Based on these findings, the percentage of molar fraction ( f ) of electronically conductive species in the formed interphase is proposed as a key factor for indicating the interfacial stability for the first time. Furthermore, we propose a specific high-throughput screening scheme to filter the functional coating materials by comprehensively evaluating their functionality. The tiered screening identifies 48 coating materials with optimal properties. The work highlights the significant roles of rational coupling of the cathodes and SSEs, and optimizing interfacial coating materials for solid-state batteries. It opens new avenues for engineering an interphase with improved interfacial compatibility to realize long-term cyclability.

25 ENERGY STORAGE↗