Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINORITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Impact of the deployment schedule of fast breeding reactors in the frame of French act for nuclear materials and radioactive waste management

In the frame of the French Act of June 28, 2006 on 'a sustainable management of nuclear materials and radioactive waste' EDF R and D assesses various research scenarios of transition between the actual French fleet and a Generation IV fleet with a closed fuel cycle where plutonium is multi-recycled. The basic scenarios simulate a deployment of 60 GWe of Sodium-cooled Fast Reactors (SFRs) in two steps: one third from 2040 to 2050 and the rest from 2080 to 2100 (scenarios 2040). These research scenarios assume that SFR technology will be ready for industrial deployment in 2040. One of the many sensitivity analyses that EDF, as a nuclear power plant operator, must evaluate is the impact of a delay of SFR technology in terms of uranium consumptions, plutonium needs and fuel cycle utilities gauging. The sensitivity scenarios use the same assumptions as scenarios 2040 but they simulate a different transition phase: SFRs are deployed in one step between 2080 and 2110 (scenarios 2080). As the French Act states to conduct research on minor actinides (MA) management, we studied different options for 2040 and 2080 scenarios: no MA transmutation, americium transmutation in heterogeneous mode based on americium Bearing Blankets (AmBB) in SFRs and all MA transmutation in heterogeneous mode based on MA Bearing Blankets (MABB). Moreover, we studied multiple parameters that could impact the deployment of these reactors (SFR load factor, increase of the use of MOX in Light Water Reactors, increase of the cooling time in spent nuclear fuel storage...). Each scenario has been computed with the EDF R and D fuel cycle simulation code TIRELIRE-STRATEGIE and optimized to meet various fuel cycle constraints such as using the reprocessing facility with long period of constant capacity, keeping the temporary stored mass of plutonium and MA under imposed limits, recycling older assemblies first... These research scenarios show that the transition from the current PWR fleet to an equivalent fleet of Generation IV SFR can follow different courses. The design of SFR-V2B that we used in our studies needs a high inventory of plutonium resulting in tension on this resource. Several options can be used in order to loosen this tension: our results lead to favour the use of axial breeding blanket in SFR. Load factor of upcoming reactors has to be regarded with attention as it has a high impact on plutonium resource for a given production of electricity. The deployment of SFRs beginning in 2080 instead of 2040 following the scenarios we described creates higher tensions on reprocessing capacity, separated plutonium storage and spent fuel storage. In the frame of the French Act, we studied minor actinides transmutation. The flux of MA in all fuel cycle plants is really high, which will lead to decay heat, a and neutron emission related problems. In terms of reduction of MA inventories, the deployment of MA transmutation cycle must not delay the installation of SFRs. The plutonium production in MABB and AmBB does not allow reducing the use of axial breeding blankets. The impact of MA or Am transmutation over the high level waste disposal is more important if the SFRs are deployed later. Transmutation option (americium or all MA) does not have a significant impact on the number of canister produced nor on its long-term thermal properties. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Pivotable support structure for cross canal solar array

A cross canal support structure for photovoltaic cells is disclosed. The structure includes a major frame having disconnectable and hinged connections to anchors at its corners, on either side of the canal. The major frame carries a plurality of minor frames, which are inclinable at an angle with respect to the major frame with the use of fixed or adjustable mounting plates. The combination of the major frame's tilt and the minor frame tilt enables fabrication of support structures that hold panels at latitude inclination for various portions of a canal.

42 ENGINEERING↗

Back-end of the fuel cycle - Indian scenario

Nuclear power has a key role in meeting the energy demands of India. This can be sustained by ensuring robust technology for the back end of the fuel cycle. Considering the modest indigenous resources of U and a huge Th reserve, India has adopted a three stage Nuclear Power Programme (NPP) based on 'closed fuel cycle' approach. This option on 'Recovery and Recycle' serves twin objectives of ensuring adequate supply of nuclear fuel and also reducing the long term radio-toxicity of the wastes. Reprocessing of the spent fuel by Purex process is currently employed. High Level Liquid Waste (HLW) generated during reprocessing is vitrified and undergoes interim storage. Back-end technologies are constantly modified to address waste volume minimization and radio-toxicity reduction. Long-term management of HLW in Indian context would involve partitioning of long lived minor actinides and recovery of valuable fission products specifically cesium. Recovery of minor actinides from HLW and its recycle is highly desirable for the sustained growth of India's NPPs. In this context, programme for developing and deploying partitioning technologies on industrial scale is pursued. The partitioned elements could be either transmuted in Fast Reactors (FRs)/Accelerated Driven Systems (ADS) as an integral part of sustainable Indian NPP. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Extraction chromatographic separation of Am(III) and Eu(III) by TPEN-immobilized gel

A TPEN derivative with 4 vinyl groups, N,N,N',N' -tetrakis-(4-propenyloxy-2-pyridylmethyl)ethylenediamine (TPPEN) was synthesized for the separation of trivalent minor actinides (Am(III)) and lanthanides (Eu(III)). A co-polymer gel with TPPEN and N-isopropylacrylamide (NIPA) showed a high separation factor of Am(III) over Eu(III) (SF[Am/Eu]), which was evaluated to be 26 at pH=5. Thin film of NIPA-TPPEN gel (average thickness: 2-40 nm) was immobilized on the pore surface in porous silica particles (particle diameter : 50 μm, average pore diameter : 50 and 300 nm) and a chromatographic column (diameter: 6 mm, height: 11 mm) packed with the gel-coated particles was prepared. A small amount of weakly acidic solution (pH=4) containing Am(III) and Eu(III) was supplied in the column and the elution tests of Am(III) and Eu(III) were carried out. Eu(III) was recovered separately by a weakly acidic eluent (pH=4) at 313 K and Am(III) by a highly acidic eluent (pH=2) at 298 K. These results suggest that the contentious separation of minor actinides and lanthanides is attainable by a new extraction chromatographic process with two columns adjusted to 298 K and 313 K. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced nuclear fuel cycles - Main challenges and strategic choices

A graphical conceptual model of the uranium fuel cycles has been developed to capture the present, anticipated, and potential (future) nuclear fuel cycle elements. The once-through cycle and plutonium recycle in fast reactors represent two basic approaches that bound classical options for nuclear fuel cycles. Chief among these other options are mono-recycling of plutonium in thermal reactors and recycling of minor actinides in fast reactors. Mono-recycling of plutonium in thermal reactors offers modest savings in natural uranium, provides an alternative approach for present-day interim management of used fuel, and offers a potential bridging technology to development and deployment of future fuel cycles. In addition to breeder reactors' obvious fuel sustainability advantages, recycling of minor actinides in fast reactors offers an attractive concept for long-term management of the wastes, but its ultimate value is uncertain in view of the added complexity in doing so,. Ultimately, there are no simple choices for nuclear fuel cycle options, as the selection of a fuel cycle option must reflect strategic criteria and priorities that vary with national policy and market perspectives. For example, fuel cycle decision-making driven primarily by national strategic interests will likely favor energy security or proliferation resistance issues, whereas decisions driven primarily by commercial or market influences will focus on economic competitiveness.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

New developments and prospects on COSI, the simulation software for fuel cycle analysis

COSI, software developed by the Nuclear Energy Direction of the CEA, is a code simulating a pool of nuclear power plants with its associated fuel cycle facilities. This code has been designed to study various short, medium and long term options for the introduction of various types of nuclear reactors and for the use of associated nuclear materials. In the frame of the French Act for waste management, scenario studies are carried out with COSI, to compare different options of evolution of the French reactor fleet and options of partitioning and transmutation of plutonium and minor actinides. Those studies aim in particular at evaluating the sustainability of Sodium cooled Fast Reactors (SFR) deployment and the possibility to transmute minor actinides. The COSI6 version is a completely renewed software released in 2006. COSI6 is now coupled with the last version of CESAR (CESAR5.3 based on JEFF3.1.1 nuclear data) allowing the calculations on irradiated fuel with 200 fission products and 100 heavy nuclides. A new release is planned in 2013, including in particular the coupling with a recommended database of reactors. An exercise of validation of COSI6, carried out on the French PWR historic nuclear fleet, has been performed. During this exercise quantities like cumulative natural uranium consumption, or cumulative depleted uranium, or UOX/MOX spent fuel storage, or stocks of reprocessed uranium, or plutonium content in fresh MOX fuel, or the annual production of high level waste, have been computed by COSI6 and compared to industrial data. The results have allowed us to validate the essential phases of the fuel cycle computation, and reinforces the credibility of the results provided by the code.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Oppenheimer's Box of Chocolates: Remediation of the Manhattan Project Landfill at Los Alamos National Laboratory - 12283

Material Disposal Area B (MDA B) is the oldest radioactive waste disposal facility at Los Alamos National Laboratory. Operated from 1944-48, MDA B was the disposal facility for the Manhattan Project. Recognized as one of the most challenging environmental remediation projects at Los Alamos, the excavation of MDA B received $110 million from the American Recovery and Reinvestment Act of 2009 to accelerate this complex remediation work. Several factors combined to create significant challenges to remediating the landfill known in the 1940's as the 'contaminated dump'. The secrecy surrounding the Manhattan Project meant that no records were kept of radiological materials and chemicals disposed or of the landfill design. An extensive review of historical documents and interviews with early laboratory personnel resulted in a list of hundreds of hazardous chemicals that could have been buried in MDA B. Also, historical reports of MDA B spontaneously combusting on three occasions -with 50-foot flames and pink smoke spewing across the mesa during the last incident in 1948-indicated that hazardous materials were likely present in MDA B. To complicate matters further, though MDA B was located on an isolated mesa in the 1940's, the landfill has since been surrounded by a Los Alamos commercial district. The local newspaper, hardware store and a number of other businesses are located directly across the street from MDA B. This close proximity to the public and the potential for hazardous materials in MDA B necessitated conducting remediation work within protective enclosures. Potential chemical hazards and radiological inventory were better defined using a minimally intrusive sampling method called direct push technology (DPT) prior to excavation. Even with extensive sampling and planning the project team encountered many surprises and challenges during the project. The one area where planning did not fail to meet reality was safety. There were no serious worker injuries and the minor injuries recorded were those common to construction type activities. Extensive monitoring along the site boundary demonstrated that no hazardous chemicals were released and radiological dose to the public was within administrative limits. More than three years of effort by the LANL project team went into the planning for remediation of Material Disposal Area B. Hundreds of historical documents were reviewed; retired personnel were extensively interviewed and noninvasive techniques were used to characterize the site. The information collected was incorporated into the safety requirements, cost estimate, schedule and primary execution plan for the project. Ultimately the waste volume managed by the project approached 40000 m{sup 3}, more than double the original project estimate. This increase had a major impact on both project cost and schedule. Nuclear safety requirements for the project were based on an estimated MDA B radionuclide inventory of 12 PE-Ci. When excavation was complete over 123 PE-Ci had been removed from the trenches. The radionuclide inventory at MDA B was an order of magnitude higher than estimated. Work at MDA B could not have proceeded without the safety basis exemption from DOE-HQ. The one area where planning did not fail to meet reality was safety. There were no serious worker injuries and the minor injuries recorded were those common to construction type activities. Extensive monitoring along the site boundary demonstrated that no hazardous chemicals were released and radiological dose to the public was within administrative limits. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Integrated X-ray detection system for determination of nuclear material concentration

An integrated system of X-ray Absorption Spectrometry (XAS), also called L-edge densitometry for uranium (LED) and X-ray Fluorescence spectrometry (XRF) is designed using Monte Carlo simulation for determining concentration of uranium and minor actinides for safeguard. The system can be useful to determination uranium and minor actinide, such as plutonium, neptunium, and etc., concurrently. The equipment is compact compared to the K-edge densitometer with high purity germanium detector which needs liquid nitrogen cooling since a low energy X-ray source is used. The system has been validated from simulation and analysis of the transmitted and reflected spectrum. The concentrations of nuclear material samples are obtained from this study. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hanford single-shell tank sidewall coring Project - 15548

As part of an enhanced Single-Shell Tank (SST) integrity project, Washington River Protection Solutions, the US DOE Hanford site Tank Operations Contractor, established an expert panel to provide recommendations for implementation of the project. In one of the main areas of interest, structural integrity, the panel recommended obtaining and testing a vertical core from the entire depth of the sidewall for SSTs that have leaked and have been operated at high temperatures for extended periods. Due to concerns over handling contaminated samples, the panel later recommended that the evaluation focus only on thermal degradation. SST 241-A-106 was selected as the best choice for sidewall coring based on heat exposure and other factors. During site preparation activities, nondestructive testing and evaluation of the exposed tank dome and sidewall was performed using impact echo, spectral analysis of surface waves, and sonic echo/impulse response acoustic wave test methods. Good results were observed in the tests performed on the dome, but results were inconclusive for the full wall height due to signal damping. Results indicated that no cracking was predicted in the upper wall. Sidewall coring of tank A-106 was completed over two weeks in May 2014. Over 38 feet of concrete core was successfully removed, to a depth approximately halfway through the tank footing. Nondestructive and destructive physical testing of the concrete core specimens was successfully performed and included visual examination and determination of transverse and longitudinal resonant frequency and dynamic modulus of elasticity; pulse velocity; static modulus of elasticity; Poisson's ratio; and compressive strength. The testing indicated favorable results with values generally greater, and in many cases significantly greater, than expected in comparison with the values originally specified and those used in the current structural analysis of record. Petrographic analysis was performed to assess the quality and condition of the concrete and the extent of any deterioration or deleterious reactions occurring within the concrete, and determined that the concrete within the examined core segments is in overall good condition, with a minor amount of microcracking and minor evidence of deleterious mechanisms that do not appear to have significantly affected the overall quality and integrity of the concrete. The results of the testing performed on the concrete core removed from the sidewall of SST 241-A-106 do not reveal any deficiencies with the structural integrity of the tank. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of a Workforce for the Nuclear Industry - 16513

The US Department of Energy's Office of Environmental Management (DOE-EM) oversees one of the largest environmental restoration projects in the world. DOEEM's labor statistics show that 91% of EM employees are 40 years old or older and only 1% of its workforce is under 30 years old. In addition, it is estimated that within the next three years, DOE-EM will lose as much as 30-35% of its technical workforce due to retirement. DOE-EM is responding to the aging workforce problem by proactively partnering with universities to train and develop the new generation for the environmental restoration workforce. In 2007, DOE-EM and Florida International University's Applied Research Center (ARC) established the DOE-FIU Science and Technology Workforce Development Program. This is an innovative program designed to train and mentor FIU students in STEM (science, technology, engineering, and math) disciplines and provides them with career paths in environmental restoration and the nuclear industry. The selected students (called DOE Fellows) perform hands-on environmental remediation research and participate in internships at DOE Headquarters, DOE sites, national laboratories, and DOE contractors. Upon graduation and completion of the DOE fellowship, DOE Fellows pursue employment opportunities with DOE and its contractors. In addition, DOE-EM has also established a Minority Serving Institution STEM program targeting STEM students at Historically Black Colleges and Universities (HBCUs). Both programs have the purpose of enhancing educational and training opportunities to minority students. DOE Fellows support DOE-EM research at FIU's ARC. The Fellows work side by side with ARC's scientists and engineers in the research of technologies and methodologies in the areas of high level waste/waste disposal and treatment, soil and groundwater remediation and modeling, deactivation and decommissioning (D and D) technology test and evaluation, and engage in the development of information technology systems in support of the DOE-EM environmental remediation mission. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effects of 90 deg. vertical elbows on two-phase flow parameters

This study investigates two-phase flow from vertical-upward to horizontal and horizontal to vertical-downward direction through 90 deg. vertical elbows. Specifically, effects of 90 deg. vertical elbows on two-phase pressure drop, development of bubble distribution, and one-dimensional transport of bubble velocity are studied. Pressure measurements are obtained along the test section over a wide range of flow conditions. The two-phase pressure drops across the elbows are modeled using the modified Lockhart-Martinelli correlation which accounts for the minor loss effect. It is demonstrated that the modified Lockhart-Martinelli correlation can predict the pressure loss across elbows with different orientations and angles by varying the minor loss coefficient. A database is established by measuring two-phase flow parameters across 90 deg. vertical elbows using a four-sensor conductivity probe. It is found that immediately downstream of the 90 deg. vertical-upward elbow, the bubbles have a bimodal distribution along the horizontal radius of the pipe cross-section causing a dual-peak in the profiles of local void fraction and interfacial area concentration. As the flow develops, the bimodal bubble distribution dissipates and develops to a single-peaked bubble distribution near the top of the pipe. Immediately downstream of the 90 deg. vertical-downward elbow, a bimodal bubble distribution is also observed near the inner curvature of the elbow. As the flow develops, the bimodal bubble distribution migrates to the pipe center and finally develops to a characteristic center-peaked bubble distribution. For the area averaged void-weighted bubble velocity, it varies significantly in the elbow regions due to the changes in local velocity profile and bubble distribution caused by the elbow effects. (authors)

42 ENGINEERING↗

Aerial Lidar and Geomorphic Change Detection Software- Tools for Monitoring Canyon Sediments at LANL - 18668

The Los Alamos National Laboratory Environmental Remediation program has conducted extensive geomorphic surveys of sediment deposits in the canyon bottoms within and surrounding the facility. The goal of the geomorphic surveys was to provide basic information needed to characterize chemical inventories of the sediments downstream of historical release sites. Sediment units were mapped based on depositional setting and age. Representative characterization samples were collected for each unit and submitted for chemical analysis. Chemical inventories were estimated by calculating the total volume of each depositional unit and multiplying by average chemical concentration. This method of characterization provides a spatial distribution of chemical data based on fluvial processes. In general, for the canyon bottom sediments, the higher concentrations of industrial chemicals were associated with fine-grained floodplain deposits closest to the source. Since initial characterization, many of the reaches have undergone changes in response to post-wildfire floods and severe rain events. These events impacted the channel and floodplain deposits. Much of the elevated concentrations are confined to the over-bank deposits distal from the primary channel. In order to ensure that the sediment units containing elevated chemical concentrations are stable, repeat aerial light detection and ranging (LiDAR) surveys are conducted and changes are assessed using the Geomorphic Change Detection (GCD) plug-in for ArcGIS. These tools provide high confidence uncertainty estimates and extensive areal coverage. This is a valuable method for long-term monitoring of surface sediments with low-level but widespread contaminant distributions. All of the monitored canyon bottom reaches pass risk assessment and present technically infeasible sediment removal options. Following the 2014 monsoon season, aerial LiDAR data has been collected annually and the resulting digital elevation models (DEMs) processed using the GCD method. Changes are identified using GCD and are verified by field walk downs. If erosion is identified in areas which are vulnerable to mobilizing contaminated sediment, enhanced controls can be installed to stabilize banks or other areas with high erosion potential. Annual sediment monitoring samples are collected where there is evidence for flow and deposition within the past year. Since 2014, no severe floods have been catalogued using the LiDAR surveys and GCD software. The recent rainfall/runoff events have not caused major changes to the canyon bottom channels and floodplains. Geomorphic processes identified in the monitoring results include channel aggradation and incision that over the course of a monsoon season results in minor changes to the system. Other active processes contributing to observed changes are minor slides, flows, slumps, and falls of unconsolidated sediment on steep bedrock or soil surfaces. A comprehensive baseline has been established by geomorphic mapping and characterization sampling. Periodic monitoring consists of LiDAR surveys and GCD analysis which offers an effective and defensible methodology for documenting stability of surface sediments. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mass Inventory Balance and Fuel Breeding Analysis on Transuranic Recycling Option of FBR

Maintaining sustainability of nuclear fuel can be maintained by utilizing new fresh fuel resources, utilization of spent fuel resource, and obtaining fuel breeding resource in the reactors. Utilization of used fuel from recycling resource and fuel breeding resource becomes the key issue which affects to the reprocessing and refueling facilities. Some minor actinides (MA) have been developed to be recycled as well as some different compositions of plutonium for some purposes such as converted fuel for extending longer reactor operation, burning and transmutation of MA, fuel breeding of FBR as well as for proliferation resistance purposes. This evaluation intends to investigate the mass inventory balance focused on plutonium (Pu) and minor actinide (MA) inventory and reactor behavior in relation to reactor criticality, excess reactivity and fuel breeding for several fuel types. Time dependence as well as irradiation process during reactor operation gives the significant impact for changing the behavior of fuel composition which affects to the behavior of reactor itself. Reactor operation time effect on this analysis has been analyzed from the beginning of cycle up to the equilibrium condition of each fuel type compositions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of Alloying Additions on Wrought FeCrAl Alloys for Accident-Tolerant Fuel Cladding

Nuclear-grade wrought Fe-Cr-Al alloys are under development as one of the candidate materials for accident-tolerant fuel (ATF) cladding for light water reactors (LWRs) because of their superior oxidation and corrosion resistance in high-temperature steam environment compared to Zr-based alloys that are currently in service. Numerous efforts have been made for the development of the FeCrAl alloys with the ATF concept. The current researches focused on optimizing the balance between the improved environmental compatibility and sufficient mechanical properties in both normal service condition and under accident scenario, as well as fabricability of seamless tube product for fuel cladding applications. Alloying addition is one of the key factors to control the various properties. The effect of Cr and Al additions on the properties in model Fe-Cr-Al-Y alloys were systematically examined by the authors, and the candidate base alloy composition with 13 wt.% Cr and 5 wt.% Al was proposed for further development. The modified FeCrAl alloys with Mo and Nb additions were also investigated in order to achieve improved strength. It was revealed that the microstructure control together with the thermal stability to retain desired microstructure were also the dominant factors for successful development of ATF FeCrAl alloys, especially when the fabricability of seamless tube production was also considered. This paper summarizes further investigation of alloying effects with a wide composition range of Cr and Al additions in the model alloys, as well as the effect of minor alloying additions of Mo, Nb, and Zr, through evaluation of the tensile properties. The combined effect of microstructure control is also discussed. Effect of alloying additions on tensile properties of wrought FeCrAl alloys was investigated. Minor alloying additions such as Al, Mo, Nb, and Zr were found to improve room-temperature tensile strength of the wrought FeCrAl alloys significantly. It was also found that stabilized deformed microstructure consisting of subgrains was also effective to improve the properties compared to the recrystallized grain structure. Optimization to balance the properties and the seamless FeCrAl tube fabricability is currently in progress. (authors)

36 MATERIALS SCIENCE↗

Microstructural Characteristics of U-Zr Ingot Slug and Atomized Powder for SFR metal Fuel

Rod-type fuel slugs and spherical powder of U- 10wt.%Zr alloy was also fabricated and characterized in microstructure by injection casting, gravity casting and centrifugal atomization process. U grains became finer from ∼30μm in conventionally ingot rod to ∼2μm in atomized powder. Laminar structure became so fine from ∼0.2μm in conventionally cast ingot rod to 0.05∼0.1μm in atomized powder. Metallic fuels such as U-Zr and U-Pu-Zr alloys have been considered as a nuclear fuel for a sodium-cooled fast reactor (SFR), related to the closed fuel cycle for managing minor actinides and reducing a high radioactivity levels since the 1980's. Metallic fuel slugs of U-Pu-Zr alloys for SFR have conventionally been fabricated by an injection casting method. U-Pu-Zr alloy melts are injected and cast into quartz tube molds during injection casting. Metallic fuel slugs are collected by fracturing quartz tubes from the molds. Demolded quartz tubes are treated with radioactive wastes. Recently, management of minor actinides (MA) became an important issue because direct disposal of the long-lived MA can be a long-term burden for a tentative repository up to several hundreds of thousand years. The metallic fuel for SFR should be remotely fabricated under a radiation shielded environment such as a hot cell, because it contains highly radioactive MA such as Np, Am and Cm. The addition of MA in the fuel composition introduces new challenges in the manufacturing of a metallic fuel slug. Am has a high vapor pressure under a vacuum atmosphere at above a melting temperature of U-Zr or U-Pu-Zr. Used graphite crucibles and quartz molds cannot be recycled easily because of difficult decontamination of radioactive residues on their surfaces. It is necessary to minimize the vaporization of Am and volume of radioactive wastes. Atomized metallic fuel does not need these quartz molds during fabrication, as uranium alloys are prepared as a particle form. It is possible to reduce the formation of radioactive wastes by applying the fabrication process of a particulate metallic fuel. Metallic fuel having a fine microstructure, which originates from a rapid solidification effect during atomization process, results in a higher FG release rate during irradiation. In the case of applying a new forming method such as vibrocompaction in Zr sheath, the sheath can act as a reliable FCCI (fuel/cladding chemical interaction) barrier and a re-constraint for external elongation. In addition, atomized fuel powder, dispersed in a Na liquid metal having a high thermal conductivity, may have a lower temperature distribution during irradiation. In order to develop an efficient fabrication process of metallic fuel for SFR, U-Zr ingot rods were fabricated in a lab-scale with various casting methods. Rod-type U-Zr fuel slugs were fabricated by gravity casting and injection casting. Spherical powder of U-Zr alloy was also fabricated by centrifugal atomization. And then, the microstructural characteristics were investigated by using electron microscopes and energy-dispersive electron X-ray spectroscopy. Atomized U-10Zr powder generally showed spherical morphology of below 200 μm in particle size. U grains became finer from ∼30 μm in conventionally ingot rod to ∼2 μm in atomized powder. Laminar structure became so fine from ∼0.2 μm in conventionally cast ingot rod to 0.05∼0.1 μm in atomized powder. Atomized particulate metallic fuel for SFR has a fine microstructure, resulting in a higher fission gas release rate during irradiation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An Introduction to the FCRD Transmutation Fuels Handbook 2015

Transmutation of minor actinides such as Np, Am, and Cm in spent nuclear fuel is of international interest because of its potential for reducing the long-term health and safety hazards caused by the radioactivity of the spent fuel. For this reason, the DOE Fuel Cycle Research and Development (FCRD) Advanced Fuels Campaign (AFC) has been performing research on nuclear fuel technologies that could be used in conjunction with a future actinide transmutation mission. One important approach to transmutation involves incorporating the minor actinides into U-Pu-Zr alloys, which can be used as fuel in fast reactors. It is, therefore, important to understand the properties of U-Pu-Zr alloys. The Idaho National Laboratory has recently published a handbook intended to summarize key properties of these alloys for researchers. This handbook focuses on phases and key thermophysical properties of elements and alloys in the U-Pu-Zr system. It is envisioned as the first of a series, which will serve as a summary of current knowledge about important properties of transmutation fuels. Future volumes will include information about properties and materials not covered in the first edition, as well as updates to information in this edition of the handbook. The handbook is intended to serve two audiences. One audience is researchers, who may find it useful to know what has been measured, where it has been published, and what kinds of information are needed. A second audience is modelers, who need a concise summary of information about specific properties and the accuracy with which they are known. The two audiences have different needs, and the handbook is a compromise intended to be useful to both. Therefore, it includes summaries of research results and needs, but generally does not present the original data. It also includes numerous graphs and, where available, equations that provide convenient approximations to materials properties for modelers. It is important to understand that most of the equations provided in this handbook are derived by fitting polynomials to data and have no physical basis; while they can be used with caution for design studies, fuel modelers will probably want to use the original experimental data to develop or validate their own equations and/or models. Although the handbook includes some citations to research involving development of models, its primary focus is experimental data. Many of the measurements of the U-Pu-Zr system were made before 1980. Where possible, the handbook relies on previous reviews of experimental data rather than presenting new interpretations of the old information. It is expected that researchers will refer to the original literature for details that are not presented in the handbook. Metals and alloys in the U-Pu-Zr system are uniquely difficult to study for a number of reasons. Experimental designs may need to be modified to allow researchers to work with these hazardous materials safely. Kinetics of phase transformations are commonly sluggish, and it is highly unlikely that all of the samples in previous research had equilibrium phases and microstructures. Thermal cycling effects (changes in sample characteristics that are not fully reversed during cooling) are commonly reported and may be significant. Careful control of impurities (particularly oxygen) during sample fabrication and data collection is both crucial and difficult, and concentrations below 100 ppm in samples may significantly affect thermophysical properties. For all of these reasons, differences between measured values for similar alloys are commonly far larger than the estimated errors for individual measurements. Further research on well-characterized materials with careful control of impurities is needed for all of the alloys discussed here. The 2015 FCRD Handbook summarizes currently available information about U, Pu, Zr, and their binary and ternary alloys. It contains information about phase diagrams and related information (including phases and phase transformations); heat capacity, entropy, and enthalpy; thermal expansion; and thermal conductivity and diffusivity. In addition to presenting information about materials properties, it attempts to provide information about how well the property is known and how much variation exists between measurements. Although the handbook includes some references to publications about modeling, its primary focus is experimental data. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nuclear Crisis Communication in an Era of Fake News and Media Overload - 19414

Over the past several decades, the nuclear industry has worked diligently to improve the security and safety aspects of their technology, but it has failed to meet the challenge of the public's negative perception. Studies have shown that nuclear energy and nuclear waste evoke fear among the general populace because people see risks as immediate, unknown, uncontrollable, and potentially catastrophic. To some extent, negative public perception challenges for the nuclear industry are primarily a consequence of its own inability to communicate the benefits of nuclear science effectively with the lay public. While effective and trustworthy communication cannot guarantee success, it helps shape public opinion, and for a routinely misperceived project like a nuclear facility, that is paramount. Fukushima was the first nuclear accident to occur in the world where citizens have access to 24/7 news channels and the ability to respond in a real-time manner through social media outlets. Following the Fukushima accident, social media sites were filled with information regarding nuclear energy that were based more on mass rumor and even paranoia than facts. More locally, we have seen this trend following what was a minor external radiation release event at the WIPP in February 14, 2014. Many online news sources were flooded with anti-nuke stories aimed at pushing a fear of radiation, such as inferring an increase in cancer rates among the public from this minor incident; which was exactly the opposite of what was true. Today, when the public gets its news from social media and online sources, people are faced with rapidly changing and contrasting interpretations of the same story, depending on when they accessed the latest news. They are also increasingly vulnerable to fake news, including disinformation deliberately planted and cultivated by the anti-nuclear movement. Public reactions following these nuclear events reinforced the value of effective communication in maintaining the high level of transparency necessary for long-term, local acceptance and support for nuclear facilities. A lack of trustworthy communication leaves a vacuum that can be quickly filled by rumors and fake information. When dealing with a nuclear crisis, failure to recognize the rapidly changing and contrasting media framing, or believing fake news could have very real and catastrophic consequences. Trusted organizations must swiftly take charge and guide the way in which the crisis is framed to keep the public adequately and accurately informed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effects of He Ion Irradiation in Simple Borosilicate Glasses for HLW Immobilisation - 20324

High-level radioactive waste (HLW) consists of fission products and minor actinides. Borosilicate glass is the host material of choice in most countries to safely immobilize HLW, followed by eventual geological disposal. HLW glasses will experience both self-heating and self-irradiation effects due to the decay of fission products and minor actinides present therein. During the first 500 years of geological disposal, beta-gamma decay will be the main source of radiation due to short half-lives of fission products, as compared to very long-lived actinides which will be responsible for irradiation over much longer timescales. High-energy alpha particles and alpha recoil nuclei can potentially have significant impact (stored energy, volume change, accumulated dose, chemical durability) on the performance of the wasteform over longer timescales. Thus, to ensure safe and economic disposal over geological periods (10{sup 4} - 10{sup 6} years), the assessment of performance and properties in terms of radiation effects becomes indispensable. This work aims to simulate the effects of alpha decay in radioactive waste glasses. Two international glasses, namely UK 'MW' lithium-sodium borosilicate and Indian sodium-barium borosilicate, which are being used as HLW immobilization matrices by the UK and India respectively, were prepared by a melt-quench method and annealed below their glass transition temperatures. Both glasses were irradiated with 650 KeV He{sup 2+} ions with doses ranging from 10{sup 15} to 10{sup 17} ions/cm{sup 2}. Structural analysis was carried out using electron paramagnetic resonance (EPR) and Raman spectroscopies. First derivative continuous wave EPR spectra were recorded for all pristine and irradiated glass monoliths at room temperature using an X-band (frequency 9.6 GHz) EPR Bruker spectrometer. Results from EPR analyses showed the formation of irradiation induced paramagnetic centers at g ∼ 2.00 in all irradiated glasses. Raman spectra of pristine and irradiated samples were acquired, and showed notable changes in glass structure post-irradiation, with the emergence of a broad Raman band at 1560 cm{sup -1} upon irradiation with high fluences. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗