Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Investigating the role of anhydrous oxidative weathering on sedimentary rocks in the Transantarctic Mountains and implications for the modern weathering of sedimentary lithologies on Mars

We present that alteration of the uppermost surfaces of geologic materials is a pervasive process on planetary surfaces that is dependent upon factors including parent composition and the environment under which alteration is occurring. While rapid and pervasive in hot and humid climates on Earth, chemical weathering of rock surfaces has also been found to dominate in some of Earth's coldest and driest landscapes as well. Specifically, surfaces dominated by resistant fine-grained igneous rocks in the Antarctic preserve evidence of oxidative weathering processes, which represent the initial immature surface alteration processes that stagnate due to the lack of available water and kinetics necessary for the production of more mature alteration phases. In this study, we test the hypothesis that oxidative weathering also dominates the surfaces of sedimentary rocks throughout the Antarctic. We investigated the chemistry and mineralogy of a suite of sedimentary rocks from the Transantarctic Mountains ranging from fine-grained tuffs to coarse-grained sandstones and conglomerates. Additionally, our results show that, like the previously studied fine-grained igneous rocks in the Antarctic, sedimentary rocks generally showed only minor chemical weathering signatures at their surfaces relative to their interiors. However, unlike the igneous rocks in this earlier study, the sedimentary rocks exhibited a wide variety of non-systematic differences between surface and interior compositions. This variability of surface weathering signatures is equally as complex as the physical properties and compositions inherently present within these different sedimentary lithologies. Based on these analyses, it is apparent that oxidative weathering products do not dominate the surfaces of sedimentary rocks throughout the Transantarctic Mountains, which instead exhibit a wide array of weathering signatures that are likely dependent on both lithological and environmental factors. Considering that sedimentary lithologies are widespread across a significant fraction of the martian surface, our results suggest that observed alteration signatures limited to the surfaces of martian sedimentary rocks are most likely to be minor and to vary as a result of the lithological properties of the specific rock unit and not as a result of the widespread influences of the modern cold and dry climatic conditions.

58 GEOSCIENCES↗

Chemical alteration of fine-grained sedimentary rocks at Gale crater

From Sol 750 to 1550, the Curiosity rover documented >100 m thick stack of fine-grained sedimentary rocks making up part of the Murray formation, at the base of Mt Sharp, Gale crater. Here, we use data collected by the ChemCam instrument to estimate the level of chemical weathering in these sedimentary rocks. Both the Chemical Index of Alteration (CIA) and the Weathering Index Scale (WIS) indicate a progressive increase in alteration up section, reaching values of CIA of 63 and WIS of 25%. The increase in CIA and WIS values is coupled with a decrease in calcium abundance, suggesting partial dissolution of Ca-bearing minerals (clinopyroxene and plagioclase). Mineralogy from the CheMin X-ray diffraction instrument indicates a decrease in mafic minerals compared with previously analyzed strata and a significant proportion of phyllosilicates consistent with this interpretation. Furthermore, these observations suggest that the sediments were predominantly altered in an open system, before or during their emplacement, contrasting with the rock-dominated conditions inferred in sedimentary deposits analyzed at Yellowknife Bay.

58 GEOSCIENCES↗

Copper enrichments in the Kimberley formation in Gale crater, Mars: Evidence for a Cu deposit at the source

Copper quantification with laser induced breakdown spectroscopy (LIBS) using a univariate calibration model enables the ChemCam instrument onboard the Curiosity rover to measure unusually elevated Cu concentrations in potassic sandstones and Mn-oxide-bearing fracture fills in the Kimberley region of Gale crater, Mars. Mostly, the copper phases occurring in sedimentary bedrock are associated with detrital silicates, including feldspars, pyroxenes and K-phyllosilicates, likely coming from a potassic igneous source near the northern crater rim, while those present in the fractures are likely adsorbed on the surface of manganese oxides. These two different mineralogical associations imply at least two distinct processes: Cu enrichment in bedrock at the source, likely during crystallization of the igneous silicates, and adsorption of Cu on Mn-oxides precipitated from groundwater that encountered oxidizing conditions within fractures in the bedrock. Finally, the potassic sediments enriched in copper may be evidence of a porphyry copper deposit or an impact-induced hydrothermal deposit in the source region.

58 GEOSCIENCES↗

Boron adsorption in clay minerals: Implications for martian groundwater chemistry and boron on Mars

Boron has been detected on Mars in calcium-sulfate veins found within clay mineral rich rocks on Mars by the Mars Science Laboratory (MSL) Curiosity rover using Laser Induced Breakdown Spectroscopy (LIBS) analysis. Borates play a vital role in stabilizing ribose on Earth and has been suggested as a key requirement for life. Borate ions readily adsorb to phyllosilicate clay minerals. The discovery of boron on Mars in proximity to phyllosilicate-bearing bedrock may have strong implications for potential past prebiotic conditions on Mars. In this study we generated a suite of clay minerals with adsorbed borate, including both typical terrestrial clay minerals (montmorillonite) and Mars-analog clay minerals (nontronite, saponite, griffithite), to understand controls on borate adsorption and to analyze with LIBS to compare with MSL data. Clay minerals were subjected to mineralogical and chemical analysis before and after adsorption. Adsorption analysis revealed that the Mars analog clay minerals adsorbed less boron than terrestrial counterparts, but within comparable amounts to those detected on Mars and in meteorites. Post-adsorption analysis by X-ray diffraction (XRD) revealed slight changes in the interlayer spacing of many of the clay minerals. Based on the adsorption analysis of the Mars-analog clay minerals, phyllosilicate-bearing bedrock in Gale crater may contain up to 90-110 ppm B. A series of borate-enriched samples were created for analysis of LIBS spectra from ChemCam on the Curiosity rover and SuperCam on the Perseverance Rover. Finally, the results of this study may provide insight into martian groundwater geochemistry processes and the mobility of a key molecule connected with life.

58 GEOSCIENCES↗

U.S. DOE NETL methodology for estimating the prospective CO 2 storage resource of shales at the national and regional scale

While the majority of shale formations will serve as reservoir seals for stored anthropogenic carbon dioxide (CO2), hydrocarbon-bearing shale formations may be potential geologic sinks after depletion through primary production. Here in this paper we present the United States-Department of Energy-National Energy Technology Laboratory (US-DOE-NETL) methodology for screening-level assessment of prospective CO 2 storage resources in shale using a volumetric equation. Volumetric resource estimates are produced from the bulk volume, porosity, and sorptivity of the shale and storage efficiency factors based on formation-scale properties and petrophysical limitations on fluid transport. Prospective shale formations require: (1) prior hydrocarbon production using horizontal drilling and stimulation via staged, high-volume hydraulic fracturing, (2) depths sufficient to maintain CO 2 in a supercritical state, generally >800 m, and (3) an overlying seal. The US-DOE-NETL methodology accounts for storage of CO 2 in shale as a free fluid phase within fractures and matrix pores and as an sorbed phase on organic matter and clays. Uncertainties include but are not limited to poorly-constrained geologic variability in formation thickness, porosity, existing fluid content, organic richness, and mineralogy. Knowledge of how these parameters may be linked to depositional environments, facies, and diagenetic history of the shale will improve the understanding of pore-to-reservoir scale behavior, and provide improved estimates of prospective CO 2 storage.

25 ENERGY STORAGE↗

The mechanisms, dynamics, and implications of self-sealing and CO 2 resistance in wellbore cements

Here, this study analyzes the dynamics and mechanisms of the interactions of carbonated brine with hydrated-Portland-cement; in particular, the study focuses on self-sealing, a process whereby hydrated-Portland cement reacts with carbonated brine to for silica and calcium carbonate in sufficient quantities to seal the flow pathway. The analysis is based on a comprehensive set of reactive-transport simulations that explore the complex coupled dynamics between the fluid flow and mineral reactions that underlie self-sealing, and it relies heavily on the synthesis of the extensive body of work on wellbore integrity that has been conducted over the past decade. The analysis explores a large chemical and mineralogical diversity and a wide range in physical conditions and flow regimes, attempting to assess the robustness of the analysis. Self-sealing conditions arise over a wide range in cement properties and reservoir conditions. Although some properties and conditions promote a stronger self-sealing response, self-sealing occurs for a wide range of Ca:Si ratios in cement and for various reservoir fluid compositions. Self-sealing conditions move along a wellbore proportional to the flux of the leaking carbonated brine, and the reaction zone spreads out proportional to the fluid velocity, where volumetric flux and velocity are related by porosity (flux = velocity * porosity). However, self-sealing conditions can be maintained in a specific section of a wellbore by controlling the pressure drive and/or effective wellbore permeability, which in turn can limit the flux and velocity of any leaking fluid. Finally, the phases produced by hydrating Portland cement represent a carbonic cement that will react with a carbonated brine to produce end products (calcium carbonate and silica) that can maintain integrity in the presence of carbonic acid. Lastly, the attributes that make hydrated Portland cement phases a carbonic cement are required for self-sealing.

58 GEOSCIENCES↗

Impacts on mechanical strength of chemical reactions induced by hydrous supercritical CO2 in Boise Sandstone

Geomechanics experiments were used to assess mechanical alteration of Boise Sandstone promoted by reactions with supercritical carbon dioxide (scCO 2 ) and water vapor. During geologic carbon storage, scCO 2 is injected into subsurface reservoirs, forming buoyant plumes. At brine-plume interfaces, scCO 2 can dissolve into native brines, and water from brines can partition into scCO 2 , forming hydrous scCO 2 . This study investigates the effect of hydrous scCO 2 on the strength of Boise Sandstone. Samples are first exposed to recirculating hydrous scCO 2 for 24 h at 70 °C and 13.8 MPa scCO 2 pressure. Samples are reacted with scCO 2 with added water contents up to 500 mL. After scCO 2 exposure, samples are deformed at room temperature under confining pressures of 3.4, 6.9, and 10.3 MPa. The results demonstrate that hydrous scCO 2 induces chemical reactions in Boise Sandstone, with ions migrating from the solid into the hydrous scCO 2 phase. At the longer time-scales, these reactions could lead to mechanical weakening in the samples; however, on the scale of our experiments, the strength changes are within sample variability. Because the solubility of water in scCO 2 is extremely low (0.008 mol H 2 O per 1 mol CO 2 ), the mineral dissolution of Boise Sandstone was under 0.002 wt.%. Additionally, mineral grains and pore throats in Boise Sandstone are cemented with quartz, which is not susceptible to dissolution at these conditions. Our results indicate that humidity in scCO 2 plumes is unlikely to sustain chemical reactions and induce long term strength changes in quartz cemented sandstones due to resistant mineralogies and low water solubility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The evolution of coal porosity during pyrolysis

Gasification of coal, municipal waste, or other organic materials is a potential hydrogen source that entails complex thermal decomposition and transport processes. This study provides a multiscale analysis of these processes for sub-bituminous (Usibelli, Healy, Alaska) and lignite (Center, North Dakota) coals and provides data useful for process design. The chemistry, mineralogy, and pore structures of pyrolyzed coal and their evolution with thermal decomposition are discussed. Samples pyrolyzed at 200–1000 °C were analyzed by small-angle neutron scattering; ultra-small, small-, and wide-angle X-ray scattering; and other complementary techniques. Scanning electron microscopy showed new pores in the high-temperature-pyrolyzed material. Upon heating, the coals became progressively denser, and the concentration of hydrogen decreased. Changes in pore volume fell into three temperature ranges: an initial, low-temperature range that, for the Usibelli coal, involved an increase in overall porosity; a mid-temperature range associated with pore volume loss; and a high-temperature range associated with significant porosity increase and char formation. This transformation was paralleled by changes in fractal dimension and correlation length. The higher the pyrolysis temperature the greater the small-pore-volume fraction and overall surface area became. Pyrolysis increased the lateral size of coal crystallites, decreased the amorphous fraction, and increased the aromatics fraction and overall coal rank. Comparisons of neutron and X-ray scattering data and subsequent water uptake studies showed that pre-dried coals can re-hydrate relatively rapidly upon exposure to air, which can significantly affect the porosity calculated from small-angle-scattering data. Fits to the cumulative porosity curves provide a method for modeling the physical and chemical transformation of hydrogen-containing feedstock during gasification.

Anovitz, Lawrence {Larry} [ORNL] (ORCID:0000000226↗

Multiscale formulation of frictional contact mechanics at the pore scale

Direct numerical simulation (DNS) yields the highest fidelity predictions of mechanical deformation at the pore scale, but is prohibitively expensive for analyzing large or many samples. Discrete element methods (DEM) are an efficient alternative, but are limited to granular media and incapable of estimating or controlling prediction errors. We present a pore-level multiscale method (PLMM) that approximates DNS efficiently and with controllable accuracy. We focus on the linear elastic response of a consolidated geologic porous medium with arbitrary microstructure, heterogeneous mineralogy, containing cracks or defects. PLMM decomposes the solid phase into non-overlapping subdomains, on which local basis functions are constructed. The bases are then coupled with a global interface problem that accounts for slip or stick contact conditions between the subdomains. PLMM produces an initial, but accurate, approximation to DNS that can be iteratively improved. It is amenable to parallelism and allows for different mesh, models, and physics in each subdomain. An algebraic interpretation of PLMM as a preconditioner is also presented to allow non-intrusive implementation into existing solvers. Lastly, this work extends previous developments of PLMM in fluid dynamics to solid mechanics and enables future extensions towards modeling coupled flow and mechanics problems.

42 ENGINEERING↗

Sustainable recovery of Rare Earth Elements (REEs) from coal and coal ash through urban mining: A Nature Based Solution (NBS) for circular economy

The demand for rare earth elements (REEs) has surged in recent years, driven by their crucial role in various industrial applications and their uneven geological distribution. As a result, urban mining from secondary resources, particularly coal and coal ash, has gained traction as a sustainable solution within a circular economy framework. This study highlights the significant presence of REEs in coal and coal ash, revealing that certain samples contain REE concentrations that rival traditional ores. Notably, coal ash has the potential to yield approximately 312,000 tons of REEs annually, far exceeding global demand. The research delves into advanced techniques for analyzing REEs, including elemental, isotopic, and mineralogical studies. Additionally, it explores innovative extraction methods such as the use of green solvents, nature-based solutions, and bioleaching and biosorption. By leveraging coal and its byproducts as secondary resources, this study underscores the opportunity to reduce dependence on conventional mining, enhancing the sustainability of REE recovery. Here, a comprehensive literature review was conducted to highlight technological advancements and emerging opportunities that can address current challenges in this field.

Circular economy↗

Diffusive parameters of tritiated water and uranium in chalk

The Cretaceous Chalk of North-western Europe exhibits a double porosity (matrix and fracture) providing pathways for both slow and rapid flow of water. The present study aims at understanding and predicting the contaminant transfer properties through a significant section of this formation, with a particular emphasis on diffusion. This requires to study the nature of porosity and to perform diffusion experiments in representative samples using uranium and tritiated water (HTO), respectively taken as a reactive tracer and an inert one. The diffusive parameters, i.e. the accessible porosity and the effective diffusion coefficient were determined. Additional information was obtained with mercury porosimetry, gravimetric water content, textural and mineralogical characterization. The diffusion tests performed with HTO appear to be the best method to measure the total accessible porosity in any type of porous media, especially those having large pore size distributions. Our study demonstrates that classical gravimetric water content measurements are not sensitive to the reduction in pore size as opposed to HTO diffusion tests because capillary water is not extracted by conventional gravimetric method but can still be probed by diffusion experiments. We found effective diffusion coefficients D{sub e}(U(VI)) near 4 x 10{sup -10} m{sup 2}s{sup -1}). The slower migration of U(VI) compared to HTO indicates sorption, with R{sub d}(U(VI)) from 100 to 360 mL g{sup -1}. These values are one order of magnitude larger than other determinations of the U(VI) sorption coefficient because only the matrix porosity is concerned here. The migration of U(VI) in chalk is only limited by sorption on ancillary Fe-Pb-bearing minerals. Transport of HTO and U(VI) is independent of the porosity distribution. Uranium diffusion in the chalk matrix porosity is fast enough to allow the total invasion of the pore space within characteristic time scales of the order of 1000 years. This results in a partitioning of uranium velocities in fracture flow and matrix flow proportionally to the respective fracture and matrix porosities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗