Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FIELD COIL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

L-H Transition Dynamics in ITER-Similar Plasmas with Applied n=3 Magnetic Perturbations*

In ITER-similar shape (ISS), low rotation plasmas [1] in DIII-D [ =1.5-5x1019m-3, Bt=1.9-2T, Ip=1.5MA, q95~3.6, balanced neutral beam injection (NBI)], the L-H threshold power PLH with applied n=3 Resonant Magnetic Perturbations (RMP) [2,3] is found to increase strongly with decreasing collisionality. This is a concern for H-mode access in primarily ECH-heated ITER plasmas since RMP may be applied before the L-H transition in ITER to safely suppress the first ELM. The L-H power threshold increase with RMP is determined by initially accessing H-mode via applying balanced NBI and increasing steps in ECH power at high RMP field (applied via the DIII-D I-coil system consisting of six internal coils above and six coils below the outboard tokamak midplane [2]). NBI and ECH power are then removed to let the plasma return to L-mode. A second L-H transition is induced later in the same shot by applying NBI and stepping up ECH power again to obtain the threshold power with no applied RMP as a reference. Using this method to bracket PLH, a scan of PLH vs. RMP perturbation strength is then obtained via stepping down the I-coil current (RMP perturbation strength) at constant beam and ECH power, as shown in Fig. 1.

Schmitz, L.↗

Quench performance and field quality of FNAL twin-aperture 11 T Nb 3 Sn dipole model for LHC upgrades

A 2 m long single-aperture dipole demonstrator and two 1 m long single-aperture models based on Nb 3 Sn superconductor have been built and tested at FNAL. The two 1 m long collared coils were then assembled in a twin-aperture Nb 3 Sn dipole demonstrator compatible with the LHC main dipole and tested in two thermal cycles. This paper summarizes the quench performance of the FNAL twin-aperture Nb 3 Sn 11 T dipole in the temperature range of 1.9-4.5 K. The results of magnetic measurements for one of the two apertures are also presented. Test results are compared to the performance of coils in a single-aperture configuration. Lastly, a summary of quench propagation studies in both apertures is given.

43 PARTICLE ACCELERATORS↗

Modular Coils and Plasma Configurations for Quasi-axisymmetric Stellarators

Characteristics of modular coils for quasi-axisymmetric stellarators that are related to the plasma aspect ratio, number of field periods and rotational transform have been examined systematically. It is observed that, for a given plasma aspect ratio, the coil complexity tends to increase with the increased number of field periods. For a given number of field periods, the toroidal excursion of coil winding is reduced as the plasma aspect ratio is increased. It is also clear that the larger the coil-plasma separation is, the more complex the coils become. It is further demonstrated that it is possible to use other types of coils to complement modular coils to improve both the physics and the modular coil characteristics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Tear-Drop Bifilar Sample Holder for Full Excitation and Stability Studies of HTS Cables at 4.2 K Using a Superconducting Transformer

HTS cables proposed for next-generation main, hybrid, and insert magnets will have very high I c (>10 kA) at 14 T and above. Determining the quench, current-sharing, and other properties of these cables will require measurement systems, which will likely incorporate a superconducting transformer. The utilization of high-field persistent mode solenoids will make size and cost less prohibitive, allowing a higher frequency of measurements within a larger number of research facilities. Additionally, a system designed for use with solenoids will allow for experiments at higher maximum fields than those achievable using dipoles and split coils. Proposed in this document is a bifilar sample probe, which fits within a 77-mm bore solenoid capable of measuring up to a 6-mm outer diameter conductor-on-round-core REBCO cables or wires up to 20 kA in transverse fields at 12 T and 4.2 K. Further, splices and mechanical considerations will be discussed.

43 PARTICLE ACCELERATORS↗

Vacuum vessel design with lofted toroidal surfaces for a QHS configuration

A vacuum vessel in between the hot plasma and the magnetic coils is crucial for a fusion reactor. In this study, a tool is presented to perform the initial design of such a vessel automatically. Starting from the last closed flux surface, an algorithm is developed which lofts this manifold out as much as possible. At the same time, the algorithm makes sure that no intersection with the coils takes place. In the presented work, this algorithm is applied to the HSX stellarator and it has been verified that the resulting vessel wall can be built from an engineering perspective. Using field line tracing, the strikepoints on the vessel wall indicate the initial locations for a divertor.

HSX↗

Developing the science and technology for the Material Plasma Exposure eXperiment

Linear plasma generators are cost effective facilities to simulate divertor plasma conditions of present and future fusion reactors. They are used to address important R&D gaps in the science of plasma material interactions and towards viable plasma facing components for fusion reactors. Next generation plasma generators have to be able to access the plasma conditions expected on the divertor targets in ITER and future devices. The steady-state linear plasma device MPEX will address this regime with electron temperatures of 1–10 eV and electron densities of $10^{21}{\text{}}\!-\!10^{20}$ ${\rm m}^{-3}$. The resulting heat fluxes are about 10 MW ${\rm m}^{-2}$ . MPEX is designed to deliver those plasma conditions with a novel Radio Frequency plasma source able to produce high density plasmas and heat electron and ions separately with electron Bernstein wave (EBW) heating and ion cyclotron resonance heating with a total installed power of 800 kW. The linear device Proto-MPEX, forerunner of MPEX consisting of 12 water-cooled copper coils, has been operational since May 2014. Its helicon antenna (100 kW, 13.56 MHz) and EC heating systems (200 kW, 28 GHz) have been commissioned and 14 MW ${\rm m}^{-2}$ was delivered on target. Furthermore, electron temperatures of about 20 eV have been achieved in combined helicon and ECH heating schemes at low electron densities. Overdense heating with EBW was achieved at low heating powers. The operational space of the density production by the helicon antenna was pushed up to $1.1 \times 10^{20}$ ${\rm m}^{-3}$ at high magnetic fields of 1.0 T at the target. Finally, the experimental results from Proto-MPEX will be used for code validation to enable predictions of the source and heating performance for MPEX. MPEX, in its last phase, will be capable to expose neutron-irradiated samples. In this concept, targets will be irradiated in ORNL's High Flux Isotope Reactor and then subsequently exposed to fusion reactor relevant plasmas in MPEX.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Concept Design and Analysis of the Magnet System of the Sustained High Power Density Tokamak Facility

A recent National Academy study recommended a next-step sustained high power density (SHPD) facility for the United States that can be a bridge to a compact fusion pilot plant. A design has been initiated to investigate a possible SHPD non-deuterium-tritium device that builds upon recent low aspect ratio tokamak studies. Here, a 1.2-m device with a 2.4 aspect ratio has been chosen to evaluate physics performance goals within a double-null plasma machine arrangement centered on three component features: high current density toroidal field (TF) and central ohmic heating/poloidal field (PF) coils, liquid metal divertor/first wall systems, and the integration of a limited set of outboard dual-coolant lead lithium test blankets that can be maintained within a vertical maintenance approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

HSX as an example of a resilient non-resonant divertor

This study describes an initial description of the resilient divertor properties of quasi-symmetric (QS) stellarators using the HSX (Helically Symmetric eXperiment) configuration as a test-case. Divertors in high-performance QS stellarators will need to be resilient to changes in plasma configuration that arise due to evolution of plasma pressure profiles and bootstrap currents for divertor design. Resiliency is tested by examining the changes in strike point patterns from the field line following, which arise due to configurational changes. A low strike point variation with high configuration changes corresponds to high resiliency. The HSX edge displays resilient properties with configuration changes arising from the (1) wall position, (2) plasma current, and (3) external coils. The resilient behavior is lost if large edge islands intersect the wall structure. The resilient edge properties are corroborated by heat flux calculations from the fully 3-D plasma simulations using EMC3-EIRENE. Additionally, the strike point patterns are found to correspond to high curvature regions of magnetic flux surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Reversible Thermally Driven Pump for Use in a Sub-Kelvin Magnetic Refrigerator

A document describes a continuous magnetic refrigerator that is suited for cooling astrophysics detectors. This refrigerator has the potential to provide efficient, continuous cooling to temperatures below 50 mK for detectors, and has the benefits over existing magnetic coolers of reduced mass because of faster cycle times, the ability to pump the cooled fluid to remote cooling locations away from the magnetic field created by the superconducting magnet, elimination of the added complexity and mass of heat switches, and elimination of the need for a thermal bus and single crystal paramagnetic materials due to the good thermal contact between the fluid and the paramagnetic material. A reliable, thermodynamically efficient pump that will work at 1.8 K was needed to enable development of the new magnetic refrigerator. The pump consists of two canisters packed with pieces of gadolinium gallium garnet (GGG). The canisters are connected by a superleak (a porous piece of VYCOR glass). A superconducting magnetic coil surrounds each of the canisters. The configuration enables driving of cyclic thermodynamic cycles (such as the sub-Kelvin Active Magnetic Regenerative Refrigerator) without using pistons or moving parts.

Miller, Franklin K.↗

Measurement of Resistance and Strength of Conductor Splices in the MICE Coupling Magnets

The superconducting magnets for the Muon Ionization Cooling Experiment [1] (MICE) use a copper based Nb-Ti conductor with un-insulated dimensions of 0.95 by 1.60 mm. There may be as many as twelve splices in one MICE superconducting coupling coil. These splices are to be wound in the coil. The conductor splices produce Joule heating, which may cause the magnet to quench. A technique of making conductor splices was developed by ICST. Two types of 1-meter long of soldered lap-joints have been tested. Side-by-side splices and up-down one splices were studied theoretically and experimentally using two types of soft solder made of eutectic tin-lead solder and tin-silver solder. The resistances of the splices made by ICST were tested at LBNL at liquid helium temperatures over a range of magnetic fields up to 5 T. The breaking strength of 250 mm long splices was also measured at room temperature and liquid nitrogen temperature.

42 ENGINEERING↗

Drift-kinetic effects of tungsten on plasma response to RMP in ITER

Here, effects of high- Z ( Z is the particle charge number) tungsten impurity ions on the plasma response to the resonant magnetic perturbation (RMP) field are numerically investigated for the ITER 15 MA baseline scenario, where the tungsten contribution to the plasma response is computed with a drift-kinetic model while the bulk thermal particle contributions follow the fluid approximation. The study yields three highlights: (i) the drift-kinetic contribution of the tungsten impurity exerts minor influence on the plasma response compared to that computed by the pure fluid model without tungsten; (ii) a new figure of merit, based on the resonant spectrum perturbation at the plasma boundary surface, results in different optimal coil phasing compared to that previously obtained by maximizing the edge-peeling plasma response; (iii) the optimal $n = 3$ RMP (for edge localized mode (ELM) control, $n$ is the toroidal mode number) is found to induce a large tungsten particle influx near the plasma edge associated with the neoclassical toroidal viscosity. The study thus provides useful data on the compatibility of the full tungsten wall with RMP ELM control in ITER.

ITER↗

Stray-Capacitance As a Simple Tool for Monitoring and Locating Heat Generation Demonstrated in Three Superconducting Magnets

Real-time monitoring of heat loads in cryogenic systems is critical for many applications, particularly high field magnets. In this work, we demonstrated that by monitoring changes in the capacitance of local probes consisting of thin metal strips with a porous glass fiber dielectric, boiling helium from as little as 0.1 J of deposited heat can be located by an analysis of the response speed and amplitude in nearby probes. We further implemented stray-capacitance monitoring of a magnet's metal support structures, a more global probe of the magnet volumes, in three high temperature superconducting Bi-2212 magnet types. Global structural stray-capacitance monitoring was evaluated for a single racetrack coil, a common coil dipole, and a canted cosine theta winding, showing a quench response comparable to voltage signals without inductive effects. The response of the local and global probes was compared in the single racetrack coil with well-known quench properties. Monitoring the cool-down of the common coil dipole demonstrated the added benefit of the global stray-capacitance as a liquid level monitor. This simple method of monitoring the capacitance has proven to be a versatile and robust technique for monitoring and locating heat.

43 PARTICLE ACCELERATORS↗

Final Report: Levitated Dipole Experiment

Since the very first experiments with the LDX, research progress was rapid and significant. Initial experiments were conducted with the high-field superconducting coil suspended by three thin rods. These experiments produced long-pulse, quasi-steady-state microwave discharges, lasting more than 10 s, having peak beta values of 20% [Garnier et al., Physics of Plasmas, 13 (2006) 056111]. High- beta, near steady-state discharges have been maintained in LDX for more than 20 seconds, and this capability made LDX the longest pulse fusion confinement experiment operating in the U.S. fusion program. A significant measure of progress in the LDX research program was the routine investigation of plasma confinement with a magnetically-levitated dipole and the resulting observations of confinement improvement. In both supported and levitated configurations, detailed measurements were made of discharge evolution, plasma dynamics and instability, and the roles of gas fueling, microwave power deposition profiles, and plasma boundary shape. High-temperature plasma was created by multi frequency electron cyclotron resonance heating at 2.45 GHz, 6.4 GHz, 10.5 GHz and 28 GHz allowing control of heating profiles. Depending upon neutral fueling rates, the LDX discharges contain a fraction of energetic electrons, with mean energies above 50 keV. Depending on whether or not the superconducting dipole was levitated or supported, the peak thermal electron temperature was estimated to exceed 500 eV and peak densities to approach 1e18 m -3 . We have found that levitation causes a strong inwards density pinch [Boxer et al., Nature Physics, 6 (2010) 207] and we have observed the central plasma density increase dramatically indicating a significant improvement in the confinement of a thermal plasma species.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The origin and propagation of chorus in the outer magnetosphere

Wave normals of chorus in the outer magnetosphere have been determined for the first time from data obtained with the Ogo 5 search coil magnetometer. These measurements combined with simultaneous information concerning geomagnetic field, plasma density, and the electron energy and pitch angle distributions provide a consistent picture of the generation, propagation, and subsequent damping of chorus in agreement with theory. Specifically, the data are consistent with chorus generation within 25 deg of the equatorial plane on the dayside and within 2 deg on the nightside. Chorus is generated by a Doppler-shifted cyclotron resonance with electrons between 5 and 150 keV but only when the pitch angle distribution is peaked at 90 deg to the local magnetic field and the anisotropy exceeds a critical value.

Burton, R. K.↗

Wave normal directions of chorus near the equatorial source region

OGO 5 triaxial search coil magnetometer data are used to determine the wave propagation directions of postmidnight chorus in the near-equatorial region at L shells of 6 to 7. The methods used to estimate the wave normal directions involved minimum variance, the imaginary part of the cross-spectral matrix, the eigenvector of the Hermitian cross-spectral matrix, and a fitting of dispersion relations for one-wave and two-wave models to the cross-spectral matrix. Wave propagation at all frequencies within chorus tones is found to occur most frequently along the magnetic field with median and average cone angles of 9.1 deg and 12.2 deg, respectively. It is concluded that for waves propagating parallel to B, wave growth is maximum.

Goldstein, B. E.↗

Development and Application of Predictive Tools for MHD Stability Limits in Tokamaks

This is a project to develop and apply analytic and computational tools to answer physics questions relevant to the onset of non-ideal magnetohydrodynamic (MHD) instabilities in toroidal magnetic confinement plasmas. The focused goal of the research is to develop predictive tools for these instabilities, including an inner layer solution algorithm, a resistive wall with control coils, and energetic particle effects. The production phase compares studies of instabilities in such systems using analytic techniques, PEST- III and NIMROD. Two important physics puzzles are targeted as guiding thrusts for the analyses. The first is to form an accurate description of the physics determining whether the resistive wall mode or a tearing mode will appear first as β is increased at low rotation and low error fields in DIII-D. The second is to understand the physical mechanism behind recent NIMROD results indicating strong damping and stabilization from energetic particle effects on linear resistive modes. The work seeks to develop a highly relevant predictive tool for ITER, advance the theoretical description of this physics in general, and analyze these instabilities in experiments such as ASDEX Upgrade, DIII-D, JET, JT-60U and NTSX. The awardee on this grant is the University of Tulsa. The research efforts are supervised principally by Dr. Brennan. Support is included for two graduate students, and a strong collaboration with Dr. John M. Finn of LANL. The work includes several ongoing collaborations with General Atomics, PPPL, and the NIMROD team, among others.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Drift orbit islands of energetic particles due to 3D fields in ITER

In this study, we report a comparative study of the orbit islands formed by the guiding center drift motion of test energetic particles (EPs), including both high-energy deuterium ions and fusion-born α-particles, with respect to the magnetic islands formed by tracing the field lines, for an ITER plasma representing the 15 MA baseline scenario. The particle drift orbit is modified by the presence of static resonant magnetic perturbations (RMPs) of different toroidal mode numbers n (n = 1 and 3 in this study), forming orbit islands in the Poincaré plane by passing EPs. The key findings are as follows. (i) With an n = 1 RMP field, the size of the orbit islands combined with the total RMP field, including the plasma response, is about three times smaller than that obtained by assuming the corresponding vacuum field. (ii) The orbit island size is not sensitive to the EP energy, and is comparable to those of the magnetic islands. (iii) Passing EPs with outward radial orbital drift form orbit islands that shift inward with respect to the corresponding magnetic islands, and vice versa. This radial shift, ΔΨ, measured in the normalized equilibrium poloidal flux, is quantified as ΔΨ ≃ 0.03X for the ITER baseline plasma and assuming n = 1 RMPs, with $X\equiv {(M/{M}_{\mathrm{p}})}^{1/2}{(E[\mathrm{M}\mathrm{e}\mathrm{V}])}^{1/2}{Z}^{-1}$, where M is the particle mass, Mp is the proton mass, E is the particle energy, and Z is the particle charge number. (iv) Trapped EPs do not form drift orbit islands, even in the presence of the 3D fields produced by the 90 kAt ELM control coil current in ITER, and thus possess good confinement properties. Nevertheless, the deformation of the trapped particle drift orbits in the Poincaré plane shows that the canonical toroidal angular momentum of EPs is no longer conserved in the presence of the RMP fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Target Station Design for the Mu2e Experiment

The Mu2e experiment at Fermilab is devoted to search for the conversion of a negative muon into an electron in the field of a nucleus without emission of neutrinos. One of the main parts of the Mu2e experimental setup is its Target Station in which negative pions are generated in interactions of the 8-GeV primary proton beam with a tungsten target. A large-aperture 5-T superconducting production solenoid (PS) enhances pion collection, and an S-shaped transport solenoid (TS) delivers muons and pions to the Mu2e detector. The heat and radiation shield (HRS) protects the PS and the first TS coils. A beam dump absorbs the spent beam. In order for the PS superconducting magnet to operate reliably the sophisticated HRS was designed and optimized for performance and cost. The beam dump was designed to absorb the spent beam and maintaining its temperature and air activation in the hall at the allowable level. Comprehensive MARS15 simulations have been carried out to optimize all the parts while maximizing muon yield. Results of simulations of critical radiation quantities and their implications on the overall Target Station design and integration will be reported.

43 PARTICLE ACCELERATORS↗