Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Injection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Helicon-Injected Inertial Electrostatic Confinement Neutron Source or Space Propulsion Device

Work is ongoing at the University of Illinois on a Helicon Injected Inertial Plasma Electrostatic (IEC) as a neutron source for neutron activation analysis. It is also of interest for use as an Helicon Injected IEC Rocket, or HIIPER. In both cases the use of the external plasma source allows a lower pressure in the IEC chamber, reducing inefficiency due to ion charge exchange losses. As a neutron source, the IEC grids serve to recirculate the deuterium ions such that fusion collisions can occur. For HIIPER asymmetry in the IEC grids forms a jet-like exhaust of accelerated plasma, producing a force. In both cases the IEC grid is designed to extract ions from the external radio frequency (RF) plasma generating stage run in the helicon mode. Because electrons have been measured in glow discharge mode for this grid design, the HIIPER exhaust plasma is potentially a neutralized plasma flow. This is a benefit over ion and Hall thrusters, which require electron generating cathodes to neutralize the accelerated ion exhaust. An additional benefit of this setup is that separating the plasma generating and plasma-accelerating stages is beneficial for space mission planning.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

Carbonated Brine Injection as a Low-Risk CO2 Storage Strategy: A Case Study for Inyan Kara Sandstone Reservoir

Carbonated brine storage is a low-risk geologic CO2 sequestration strategy compared to traditional supercritical CO2 injection and storage. Our study provides an evaluation methodology for CBI that can be used for other potential pilot injections in suitable fields and opens the opportunity to work with industry for CBI using existing Class II wells to gain CO2 tax credits.

Xiong, Wei↗
DOE OSTI2024

Fracture Networks Imaging in CO2 Injection Zones in IBDP Site: An Unsupervised Machine Learning Application with Multiple Datasets

This is the conference paper accompanying a poster presentation at the 17th International Conference on Greenhouse Gas Control Technologies GHGT-17 held in Calgary, Canada, October 20-24 , 2024. This work highlights the integration of unsupervised machine learning (ML) techniques as a transformative tool for advancing understanding of CO2 injection into reservoirs that could potentially contribute to optimizing injection strategies and reservoir management, ultimately bolstering the efficacy and sustainability of CO2 storage.

Kumar, Abhash↗
DOE OSTI2025

Exploring the Functional Performance of a Commercial High-Temperature Photopolymer Resin for Vat Photopolymerized Injection Molding Tools

Additive manufacturing (AM) presents a promising approach for rapid tooling, offering significant reductions in production costs and lead times compared to that of conventional moldmaking processes. This work examines the fabrication of molds for injection molding through vat photopolymerization (VPP) AM, using a commercially available photopolymer resin intended for high temperature applications (High Temp V2 resin). The photorheological behavior of the resin is examined to evaluate its curing kinetics and mechanical development during polymerization, ensuring suitability for mold fabrication. The thermal and mechanical properties of the printed photopolymer resin are characterized, alongside assessments of dimensional accuracy and surface finish, which are critical factors influencing the performance and quality of injection molded parts. Additionally, specimens produced using VPP-fabricated molds are evaluated and benchmarked against those molded with traditional metal molds.

Jones, Haley W. [Savannah River National Laborator↗
DOE OSTI2014

Operation of resonant-tunneling diodes with strong back injection from the collector at frequencies up to 1.46 THz

In search for possibilities to increase the operating frequencies of resonant-tunneling diodes (RTDs), we are studying RTDs working in an unusual regime. The collector side of our diodes is so heavily doped that the collector depletion region is fully eliminated in our RTDs and the ground quantum-well subband stays immersed under (or stays close to) the collector quasi-Fermi level. The electron injection from the collector into the RTD quantum well is very strong in our diodes and stays comparable to that from the emitter in the whole range of RTD operating biases. Our RTDs exhibit well pronounced negative-differential-conductance region and peak-to-valley current ratio around 1.8. We demonstrate operation of our diodes in RTD oscillators up to 1.46 THz. We also observe a fine structure in the emission spectra of our RTD oscillators, when they are working in the regime close to the onset of oscillations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Lithium fluoride injection layers can form quasi-Ohmic contacts for both holes and electrons

Thin LiF interlayers are typically used in organic light-emitting diodes to enhance the electron injection. Here, we show that the effective work function of a contact with a LiF interlayer can be either raised or lowered depending on the history of the applied bias. Formation of quasi-Ohmic contacts for both electrons and holes is demonstrated by electroluminescence from symmetric LiF/polymer/LiF diodes in both bias polarities. The origin of the dynamic switching is charging of electrically induced Frenkel defects. The current density–electroluminescence–voltage characteristics can qualitatively be explained. The interpretation is corroborated by unipolar memristive switching and by bias dependent reflection measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Development of a magnetized coaxial plasma gun for compact toroid injection into the C-2 field-reversed configuration device

A compact toroid (CT) injector was developed for the C-2 device, primarily for refueling of field-reversed configurations. The CTs are formed by a magnetized coaxial plasma gun (MCPG), which consists of coaxial cylindrical electrodes and a bias coil for creating a magnetic field. First, a plasma ring is generated by a discharge between the electrodes and is accelerated by Lorenz self-force. Then, the plasma ring is captured by an interlinkage flux (poloidal flux). Finally, the fully formed CT is ejected from the MCPG. The MCPG described herein has two gas injection ports that are arranged tangentially on the outer electrode. A tungsten-coated inner electrode has a head which can be replaced with a longer one to extend the length of the acceleration region for the CT. The developed MCPG has achieved supersonic CT velocities of ∼100 km/s. Plasma parameters for electron density, electron temperature, and the number of particles are ∼5 × 10{sup 21} m{sup −3}, ∼40 eV, and 0.5–1.0 × 10{sup 19}, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Radially scanning magnetic probes to study local helicity injection dynamics

Two new magnetic probes have been deployed on the Pegasus spherical tokamak to study the dynamics of local helicity injection non-solenoidal plasma start-up and current drive. The magnetic radial array probe consists of 15 pickup coils (~5 × 8 mm each) that measure B z (R) over a 15 cm linear extent. The coils consist of traces embedded in a printed circuit board. Three coil designs are utilized to balance frequency response and coil sensitivity. Helmholtz coil measurements are used to measure coil and full assembly bandwidths (~2 MHz and ~200 kHz, respectively) and sensitivities (0.18/0.35/0.96 mV T -1 s). The magnetic radial scanning probe is an array of Hall effect sensors that measure field strength ( |B| 177 mT) and direction at 8 spatial points (ΔR = 1.5 cm), supporting the studies of equilibrium field structure and low-frequency (≤5 kHz) current dynamics. It uses commercial surface-mount Hall effect sensors with chip-integrated amplifiers and compensators that are mounted in a 3-D printed frame. Helmholtz coil measurements indicate negligible cross-field gain nonlinearity and provide absolute calibration of the diagnostic. Both probes are constructed as an electrostatically shielded insertable air-side assembly that mounts within a radially translatable ultrahigh vacuum assembly from an existing probe.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

High-performance plasmas after pellet injections in Wendelstein 7-X

A significant improvement of plasma parameters in the optimized stellarator W7-X is found after injections of frozen hydrogen pellets. The ion temperature in the post-pellet phase exceeds 3 keV with 5 MW of electron heating and the global energy confinement time surpasses the empirical ISS04-scaling. The plasma parameters realized in such experiments are significantly above those in comparable gas-fuelled discharges. Here, we present details of these pellet experiments and discuss the main plasma properties during the enhanced confinement phases. Local power balance is applied to show that the heat transport in post-pellet phases is close to the neoclassical level for the ion channel and is about a factor of two above that level for the combined losses. In comparable gas-fuelled discharges, the heat transport is by about ten times larger than the neoclassical level, and thus is largely anomalous. It is further observed that the improvement in the transport is related to the peaked density profiles that lead to a stabilization of the ion-scale turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Production and Injection data for NV Binary facilities

Excel files are provided with well production and injection data for binary facilities in Nevada. The files contain the data that reported montly to the Nevada Bureau of Mines and Geology (NBMG) by the facility operators. this data has been complied into Excel spreadsheets for each of the facilities given on the NBMG web site.

15 GEOTHERMAL ENERGY↗
DOE OSTI2015

System Study: High-Pressure Coolant Injection 1998–2013

This report presents an unreliability evaluation of the high-pressure coolant injection system (HPCI) at 25 U.S. commercial boiling water reactors. Demand, run hours, and failure data from fiscal year 1998 through 2013 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10-year period, while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing or decreasing trends were identified in the HPCI results.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2015

System Study: High-Pressure Safety Injection 1998–2013

This report presents an unreliability evaluation of the high-pressure safety injection system (HPSI) at 69 U.S. commercial nuclear power plants. Demand, run hours, and failure data from fiscal year 1998 through 2013 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10-year period while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing or decreasing trends were identified in the HPSI results.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1999

Periventricular anteroventral third ventricle lesions diminish the pressor response produced by systemic injection of the N-methyl-D-aspartate receptor antagonist MK-801

This study examined whether electrolytic ablation of the periventricular anteroventral third ventricle (AV3V) would affect the increases in mean arterial blood pressure (MAP) and heart rate (HR) in conscious rats produced by systemic injection of the centrally acting N-methyl-D-aspartate (NMDA) receptor ion-channel blocker, (+)-5-methyl-10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5, 10-imine (MK-801; 250 microgram/kg, i.v.). MK-801 produced a smaller increase in MAP in rats with AV3V lesions than in sham-lesion rats (+36+/-2% vs. +52+/-5%, respectively, P<0.05). In contrast, MK-801 produced similar increases in HR in the AV3V- and sham-lesion rats (+28+/-3% vs. +22+/-4%, respectively, P>0.05). These findings demonstrate that the MK-801-induced pressor response is dependent upon the integrity of the AV3V region, whereas the MK-801-induced tachycardia is not. Copyright 1999 Elsevier Science B.V.

NASA Discipline Regulatory Physiology↗
DOE OSTI2017

Reliability in the characterization of fiber length distributions of injection molded long carbon fiber composites

The mechanical properties of a discontinuous fiber reinforced composite material are dependent on the length of the reinforcing fibers. Long-fiber thermoplastic (LFT) composites offer a compromise between ease of manufacture and mechanical properties for structural applications and are conventionally made using fibers that are initially 10–14 mm long. However, fiber attrition during the injection molding process significantly reduces the final fiber lengths in molded composite and produces a fiber length distribution (FLD), which depends on the processing parameters. Thus, accurate FLD measurements are important for reliable predictions of the composite properties. Here, we present a detailed methodology for experimentally measuring the FLD in LFT composites based on best practices. Possible biases occurring during the measurement process are discussed and their effect on the measured FLD and averaged fiber length values are evaluated. We then employ a Mori–Tanaka implementation of the Eshelby model to predict the elastic stiffness of the LFT composite and analyze the sensitivity of the stiffness values to the biases in the FLD measurements.

long-fiber thermoplastics, injection molding, fibe↗
DOE OSTI2018

Study on the Fluid Flow Characteristics of Coherent Jets with CO{sub 2} and O{sub 2} Mixed Injection in Electric Arc Furnace Steelmaking Processes

As an efficient oxygen supplying technology, coherent jets are widely applied in electric arc furnace (EAF) steelmaking processes to strengthen chemical energy input, speed up smelting rhythm, and promote the uniformity of molten bath temperature and compositions. Recently, the coherent jet with CO{sub 2} and O{sub 2} mixed injection (COMI) was proposed and demonstrated great application potentiality in reducing the dust production in EAF steelmaking. In the present study, based on the eddy dissipation concept model, a computational fluid dynamics model of coherent jets with COMI was built with the overall and detailed chemical kinetic mechanisms (GRI-Mech 3.0). Compared with one-step combustion reaction, GRI-Mech 3.0 consists of 325 elementary reactions with 53 components and can predict more accurate results. The numerical simulation results were validated by the combustion experiment data. The jet behavior and the fluid flow characteristics of coherent jets with COMI under 298 K and 1700 K (25 °C and 1427 °C) were studied and the results showed that for coherent jets with COMI, the chemical effect of CO{sub 2} significantly weakened the shrouding combustion reactions of CH{sub 4} and the relative importance of the chemical effect of CO{sub 2} increases with CO{sub 2} concentration increasing. The potential core length of coherent jet decreases with the volume fraction of CO{sub 2} increasing. Moreover, it also can be found that the potential core length of coherent jets was prolonged with higher ambient temperature.

36 MATERIALS SCIENCE↗