Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Formation of anodic layers on InAs (111)III. Study of the chemical composition

The chemical composition of {approx}20-nm-thick anodic layers grown on InAs (111)III in alkaline and acid electrolytes containing or not containing NH{sub 4}F is studied by X-ray photoelectron spectroscopy. It is shown that the composition of fluorinated layers is controlled by the relation between the concentrations of fluorine and hydroxide ions in the electrolyte and by diffusion processes in the growing layer. Fluorine accumulates at the (anodic layer)/InAs interface. Oxidation of InAs in an acid electrolyte with a low oxygen content and a high NH{sub 4}F content brings about the formation of anodic layers with a high content of fluorine and elemental arsenic and the formation of an oxygen-free InF{sub x}/InAs interface. Fluorinated layers grown in an alkaline electrolyte with a high content of O{sup 2-} and/or OH{sup -} groups contain approximately three times less fluorine and consist of indium and arsenic oxyfluorides. No distinction between the compositions of the layers grown in both types of fluorine-free electrolytes is established.

36 MATERIALS SCIENCE↗

Influence of doping with third group oxides on properties of zinc oxide thin films

The study of modifications in structural, optical and electrical properties of vacuum evaporated zinc oxide thin films on doping with III group oxides namely aluminum oxide, gallium oxide and indium oxide are reported. It was observed that all the films have transmittance ranging from 85 to 95%. The variation in optical properties with dopants is discussed. On doping the film with III group oxides, the conductivity of the films showed an excellent improvement of the order of 10{sup 3} {Omega}{sup -1} cm{sup -1}. The measurements of activation energy showed that all three oxide doped films have 2 donor levels below the conduction band.

36 MATERIALS SCIENCE↗

Electrooptical properties and structural features of amorphous ITO

Thin indium-tin oxide (ITO) films are deposited onto cold substrates by magnetron-assisted sputtering. The dependences of the structural, electrical, and optical properties of the films on the oxygen content in the atmosphere of sputtering and the growth rate are studied. It is shown that, if the substrate temperature is no higher than the ITO crystallization temperature and the conditions of growth deviate from the optimal relationship between the oxygen pressure and the growth rate, the resistance of the layers can be six or seven orders of magnitude higher than the resistance of conducting amorphous layers and reach hundreds of megaohms. At the same time, the optical properties of insulating layers in the visible spectral region are completely identical to the properties of the conducing amorphous modification. A conceptual model of defects responsible for the insulating properties of amorphous ITO is proposed.

36 MATERIALS SCIENCE↗

On the optimization of asymmetric barrier layers in InAlGaAs/AlGaAs laser heterostructures on GaAs substrates

Band offsets at the heterointerface are calculated for various combinations of InAlGaAs/AlGaAs heteropairs that can be synthesized on GaAs substrates in the layer-by-layer pseudomorphic growth mode. Patterns which make it possible to obtain an asymmetric barrier layer providing the almost obstruction-free transport of holes and the highest possible barrier height for electrons are found. The optimal compositions of both compounds (In{sup 0.232}Al{sup 0.594}Ga{sup 0.174}As/Al{sup 0.355}Ga{sup 0.645}As) at which the flux of electrons across the barrier is at a minimum are determined with consideration for the critical thickness of the indium-containing quaternary solid solution.

36 MATERIALS SCIENCE↗

Design concepts of monolithic metamorphic vertical-cavity surface-emitting lasers for the 1300–1550 nm spectral range

Possible design concepts for long-wavelength vertical-cavity surface-emitting lasers for the 1300–1550 nm spectral range on GaAs substrates are suggested. It is shown that a metamorphic GaAs–InGaAs heterostructure with a thin buffer layer providing rapid transition from the lattice constant of GaAs to that of In{sub x}Ga{sub 1–x}As with an indium fraction of x < 0.3 can be formed by molecular-beam epitaxy. Analysis by transmission electron microscopy demonstrated the effective localization of mismatch dislocations in the thin buffer layer and full suppression of their penetration into the overlying InGaAs metamorphic layer.

36 MATERIALS SCIENCE↗

Effect of the design of the active region of monolithic multi-color LED heterostructures on their spectra and emission efficiency

The design features of light-emitting-diode heterostructures with a monolithic InGaN/GaN active region containing several InGaN quantum wells (QWs) emitting at different wavelengths, grown by metal-organic chemical vapor deposition, are studied. It is shown that the number of emission bands can be raised to three by increasing the number of deposited InGaN QWs with different indium contents. The emission efficiency decreases by approximately 30% with increasing number of QWs at high currents. The dependences of the optical properties of the heterostructures on the number of QWs and types of barriers between the QWs (GaN layer or InGaN/GaN short-period superlattice) are analyzed. It is demonstrated that the ratio between the intensities of the emission lines widely varies with current flowing through the structure and greatly depends on the type and width of the barriers between the QWs.

36 MATERIALS SCIENCE↗

Technique for forming ITO films with a controlled refractive index

A new method for fabricating transparent conducting coatings based on indium-tin oxide (ITO) with a controlled refractive index is proposed. This method implies the successive deposition of material by electron-beam evaporation and magnetron sputtering. Sputtered coatings with different densities (and, correspondingly, different refractive indices) can be obtained by varying the ratio of the mass fractions of material deposited by different methods. As an example, films with effective refractive indices of 1.2, 1.4, and 1.7 in the wavelength range of 440–460 nm are fabricated. Two-layer ITO coatings with controlled refractive indices of the layers are also formed by the proposed method. Thus, multilayer transparent conducting coatings with desired optical parameters can be produced.

36 MATERIALS SCIENCE↗

Effect of the chemical composition of Cu–In–Ga–Se layers on the photoconductivity and conversion efficiency of CdS/CIGSe solar cells

The effect of the [Ga]/[In+Ga] ratio of gallium and indium on the microwave photoconductivity of Cu–In–Ga–Se (CIGSe) films and on the efficiency of solar cells fabricated in accordance with the same technology is investigated. According to the observations of a field-emission scanning electron microscopy (FESEM), the grain size decreases with increasing Ga content. With increasing gallium content in the samples, the photogenerated-electron lifetime and the activation energy of the microwave photoconductivity also decrease. The changes in the activation energy of the through conduction in darkness are less than 20%. Analysis of the obtained data shows that the known effect of the gallium gradient on the efficiency should be associated with modification of the internal structure of grains instead of with their boundaries.

36 MATERIALS SCIENCE↗

Study of the structure and composition of the strained epitaxial layer in the InAlAs/GaAs(100) heterostructure by transmission electron microscopy

The results of electron microscopy studies of an epitaxial InAlAs layer on a GaAs(100) substrate are reported. It is established that there exist misfit dislocations at the interface between the materials and there are residual strains distorting the lattice in the layer. From the measurements of lattice parameters in the directions parallel and orthogonal to the growth direction away from misfit dislocations, the local nominal lattice parameter of the layer is calculated and the relative content of indium is determined.

36 MATERIALS SCIENCE↗

Optical properties of hybrid quantum-well–dots nanostructures grown by MOCVD

The deposition of In{sub x}Ga{sub 1–x}As with an indium content of 0.3–0.5 and an average thickness of 3–27 single layers on a GaAs wafer by metalorganic chemical vapor deposition (MOCVD) at low temperatures results in the appearance of thickness and composition modulations in the layers being formed. Such structures can be considered to be intermediate nanostructures between ideal quantum wells and quantum dots. Depending on the average thickness and composition of the layers, the wavelength of the photoluminescence peak for the hybrid InGaAs quantum well–dots nanostructures varies from 950 to 1100 nm. The optimal average In{sub x}Ga{sub 1–x}As thicknesses and compositions at which the emission wavelength is the longest with a high quantum efficiency retained are determined.

36 MATERIALS SCIENCE↗

Thermoelectric properties of InSb〈Zn〉 in nanoporous glass

Nanowire structures of zinc-doped indium antimonide are fabricated. These structures are formed in porous glass with characteristic pore sizes of ~7 nm. The temperature dependences of the electrical conductivity, Seebeck coefficient, and current–voltage characteristics are studied. An increase in the InSb Seebeck coefficient in porous glass in comparison with that of the bulk material is detected for the first time.

36 MATERIALS SCIENCE↗

InSb quantum dots produced by liquid-phase epitaxy on InGaAsSb/GaSb substrates

Indium-antimonide quantum dots are for the first time formed on the surface of an epitaxial In{sub 0.25}GaAsSb layer isoperiodic to a GaSb(001) substrate by liquid-phase epitaxy in the range of temperatures T = 450–467°C. Transmission electron microscopy shows that, the shape of quantum dots is close to a truncated cone and their distribution in terms of height and base size in the ensemble is monomodal. Large-sized quantum dots (with a base size of 30–50 nm and height of 3 nm) exhibit specific contrast in the plane-view diffraction-mode image, which is indicative of the presence of misfit defects. Modification of the chemical composition of the working surface of the substrate by the deposition of an epitaxial In{sub 0.25}GaAsSb layer makes possible a threefold increase in the density of the ensemble of InSb quantum dots (1 × 10{sup 10} cm{sup –2}) compared to the density in the case of deposition directly onto the GaSb binary compound.

36 MATERIALS SCIENCE↗

Effect of the cap-layer composition on the electronic properties of InAs/GaAs quantum dots

The capping of an array of self-assembled InAs/GaAs quantum dots by an InGaAs quantum-well layer leads to an increase in their size due to indium enrichment of the region near the top of the quantum dots, which decreases the energy of the ground-state optical transition in quantum dots by 50 meV and shifts the hole wave function toward the top of the quantum dot.

36 MATERIALS SCIENCE↗

Influence of the Thermal Conditions of Fabrication and Treatment on the Optical Properties of In{sub 2}O{sub 3} Films

In{sub 2}O{sub 3} films on Al{sub 2}O{sub 3} (012) substrates are fabricated by dc magnetron sputtering at various temperatures (20–600°C). The effect of annealing and the substrate temperature on the film properties are studied by the ellipsometric method and the optical transmission method. Refractive-index profiles are constructed and band gaps for direct and indirect transitions are found. It is established that annealing leads to densification of the film material and unifies the refractive index. Annealing also decreases and unifies the energies of band-to-band transitions, which can be explained by lowering the influence of barriers in annealed films. However, the band gap for direct transitions varies greater than for indirect transitions. This fact can be associated with the mechanism of indirect transitions, notably, the participation of phonons facilitates interband transitions even if they are hindered by extra barriers caused by grain boundaries. The latter can be indirect evidence of the actuality of indirect transitions in indium oxide.

36 MATERIALS SCIENCE↗

Quasi-Classical Model of the Static Electrical Conductivity of Heavily Doped Degenerate Semiconductors at Low Temperatures

Germanium, silicon, gallium arsenide, and indium antimonide n-type crystals on the metal side of the insulator–metal transition (Mott transition) are considered. In the quasi-classical approximation, the static (direct current) electrical conductivity and the drift mobility of electrons of the c band, and electrostatic fluctuations of their potential energy and the mobility edge are calculated. It is considered that a single event of the elastic Coulomb scattering of a mobile electron occurs only in a spherical region of the crystal matrix with an impurity ion at the center. The results of calculations using the proposed formulas without using fitting parameters are numerically consistent with experimental data in a wide range of concentrations of hydrogenlike donors at their weak and moderate compensation by acceptors.

36 MATERIALS SCIENCE↗

On the Fabrication and Study of Lattice-Matched Heterostructures for Quantum Cascade Lasers

The fabrication and study of the characteristics of a lattice-matched quantum cascade laser structure on an indium-phosphide substrate, designed for a wavelength of ~4.8 μm corresponding to one of the atmospheric windows are described. The heterostructure grown by molecular-beam epitaxy consisted of thirty cascades. Lasing was experimentally observed at temperatures up to 200 K at a wavelength coinciding with the calculated one, which confirms the high heterointerface quality and high precision of the layer thicknesses and active-region doping levels.

36 MATERIALS SCIENCE↗

Multilayer Quantum Well–Dot InGaAs Heterostructures in GaAs-based Photovoltaic Converters

GaAs photovoltaic converters containing quantum well-dot (QWD) heterostructures are studied. The QWD properties are intermediate between those of quantum wells (QWs) and quantum dots. The QWDs are obtained by the epitaxial deposition of In{sub 0.4}Ga{sub 0.6}As with a nominal thickness of 8 single layers by metal-organic vapor phase epitaxy. QWDs are a dense array of elastically strained islands that localize carriers in three directions and are formed by a local increase in the indium concentration and/ or InGaAs-layer thickness. There are two quantum-well levels of varied nature in structures with QWDs. These levels are manifested in the spectral characteristics of GaAs photovoltaic converters. A short-wavelength peak with a maximum at around 935 nm is associated with absorption in the residual QW, and the long-wavelength peak (1015–1030 nm) is due to absorption in the QWDs. Investigation by transmission electron microscopy demonstrates that an increase in the number of InGaAs layers leads to stronger elastic stresses, which, in turn, increases the carrier confinement energy in the QWDs and lead to a corresponding long-wavelength shift of the internal quantum efficiency spectrum.

36 MATERIALS SCIENCE↗

Relation between the Electronic Properties and Structure of InAs/GaAs Quantum Dots Grown by Vapor-Phase Epitaxy

On the basis of a comprehensive study of the structural and electronic properties of InAs/GaAs quantum dots grown by vapor-phase epitaxy at atmospheric pressure, a structural model of the quantum dots as three truncated pyramids adjoined at their bases is chosen. The model takes into account the diffusive smearing of the composition near the base and lateral surface as well as the segregation of indium near the vertex. It is established that the wave functions of charge carriers in the ground state are localized in a comparatively small region of the quantum dot near its vertex.

36 MATERIALS SCIENCE↗