Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Homogenization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Dependence of Morphology, Shear Modulus, and Conductivity on the Composition of Lithiated and Magnesiated Single-Ion-Conducting Block Copolymer Electrolytes

Single-ion-conducting block copolymers are of considerable interest as electrolytes for battery systems, as they eliminate overpotentials due to concentration gradients. In this study, we characterize a library of poly(ethylene oxide) (PEO)-based diblock copolymers where the second block is poly(styrene-4-sulfonyltrifluoromethylsulfonyl)imide with either cation: univalent lithium or divalent magnesium counterions (PEO-PSLiTFSI or PEO-P[(STFSI) 2 Mg]). The PEO chain length is held fixed in this study. Polymers were synthesized in matched pairs that were identical in all aspects except for the identity of the counterion. Using rheology, SAXS, DSC, and AC impedance spectroscopy, we show that the dependence of morphology, modulus, and conductivity on composition in these charged copolymer systems is fundamentally different from uncharged block copolymers. At a given frequency and temperature, the shear moduli of the magnesiated copolymer systems were approximately 3-4 orders of magnitude higher than those of the matched lithiated pair. The shear moduli of all of the lithiated copolymers showed liquid-like rheological features while the magnesiated copolymers did not. All of the lithiated copolymers were completely disordered (homogeneous), consistent with the observed rheological properties. As expected, the moduli of the lithiated copolymers increased with increasing volume fraction of the ion-containing block (Φ PSTFSI ), and the conductivity decreased with Φ PSTFSI . However, the magnesiated copolymers followed a distinct trend. We show that this was due to the presence of microphase separation in the regime 0.21 ≤ Φ PSTFSI ≤ 0.36, and the tendency for microphase separation became weaker with increasing Φ PSTFSI . In conclusion, the magnesiated copolymer with Φ PSTFSI = 0.38 was homogeneous. The morphological, rheological, and conductivity properties of these systems are governed by the affinity of the cations for PEO chains; homogeneous systems are obtained when the cations migrate from the ion-containing block to PEO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic Probes of the Origin of Activity in MOF-Based C–H Oxidation Catalysis

The development of homogeneous catalysis is enabled by the availability of a rich toolkit of kinetics experiments, such as the Hgdrop test, that differentiate catalytic activity at ligand-supported metal complexes from potential heterogeneous catalysts derived from decomposition of molecular species. Metal-organic frameworks (MOFs) have garnered significant attention as platforms for catalysis at site-isolated, interstitial catalyst sites. Unlike homogeneous catalysis, relatively few strategies have been advanced to evaluate the origin of catalytic activity in MOF-promoted reactions. Many of the MOFs that have been examined as potential catalysts are comprised of molecular constituents that represent viable catalysts in the absence of the extended MOF lattice, and thus interfacial sites and leached homogeneous species represent potential sources of catalyst activity. Here, we demonstrate that analysis of deuterium kinetic isotope effects (KIEs) and olefin epoxidation diastereoselectivity provides probes of the origin of catalytic activity in MOF-promoted oxidation reactions. These analyses support involvement of lattice-based Fe sites in the turnover-limiting step of C–H activation with Fe-MOF-74-based materials (i.e., the MOF functions as a bona fide catalyst) and evidence that Cu 2 -based MOF MIL-125-Cu 2 O 2 functions as a solid-state initiator for solution-phase oxidation chemistry and is not involved in the turnover limiting step (i.e., the MOF does not function as a catalyst for substrate functionalization). furthermore, we anticipate that the simple experiments described here will provide a valuable tool for clarifying the role of MOFs in C–H oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Liquid Platform for Spinning Composite Chitin–Poly(lactic acid) Fibers

In the design of stronger chitin fibers reinforced with poly(lactic acid) (PLA), during this work, an ionic-liquid-based (IL-based) approach was developed in which both polymers were codissolved in an 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]) and wet-jet spun into composite fibers. Chitin, directly extracted from shrimp shell, had a solubility in the IL of 2.75 wt %, while PLA of MW 700 000 g/mol had a solubility of 49 wt %. Keeping the IL saturated in chitin, homogeneous solutions of chitin and PLA could be obtained up to 27 wt % (relative to the IL) PLA. Spinning dopes were prepared by maintaining the chitin concentration relative to the IL at 1.75 wt % and adding PLA in chitin to PLA weight ratios of 1:0.1 through 1:1 (PLA concentrations of 0.175–1.75 wt % relative to the IL). Homogeneous chitin/PLA fibers could be spun when the chitin to PLA ratio was between 1:0.1 and 1:0.3. The tensile strength and plasticity of the fibers depended on the chitin to PLA ratio with the highest plasticity (8.8% vs 3.0% for pure chitin fibers), strength (112 vs 71 MPa), and stiffness (5.9 vs 4.2 GPa) observed for fibers with a chitin to PLA ratio of 1:0.3. Studies of the fracturing surface of the fibers indicated that fracturing occurred through an initial disruption of the interactions between polymer chains, followed by complete fiber breakage. The work not only demonstrates that homogeneous composite fibers can be spun using a biopolymer and PLA additive, but also suggests a versatile platform for preparation of multiple biopolymer–PLA materials using solution processing methods.

1-Ethyl-3-methylimidazolium acetate↗

In situ observations of nanoparticle early development kinetics at mineral-water interfaces.

The early development of nanoparticles at mineral?water interfaces exerts crucial influences on the sequestration and transport of aqueous toxic species originating from both natural and anthropogenic sources. Homogeneous and heterogeneous nucleation often occur simultaneously, making it difficult to sort out whether toxic species are transported as free species, sorbed on nanoparticle surfaces, or trapped between aggregated nanoparticles. Here, using a newly developed X-ray scattering setup, we show how homogeneous nucleation and growth can be quantitatively separated from heterogeneous processes under aqueous conditions in real-time. Under conditions found in acid-mine-drainage (at pH 3.6 and [Fe{sup 3+}] = 10{sup -4} M), heterogeneous nucleation of iron oxide nanoparticles on quartz dominated homogeneous nucleation by a factor of 192 (by particle volume). The smallest heterogeneously formed nanoparticles had radii of 1.7 {+-} 0.5 nm, significantly smaller than the size estimated using classical nucleation theory (CNT). Based on the data, the dominant nucleation and growth mechanisms of iron oxide nanoparticles depending on ionic strength were presented. Our findings have implications for the formation and transport of nanoparticles, and thus toxins, in both environmental and biological systems.

54 ENVIRONMENTAL SCIENCES↗

Enabling Solar Water Oxidation by BiVO 4 in Strongly Acidic Solutions

The oxygen evolution reaction (OER) is paired with various electrochemical and photoelectrochemical reduction reactions used for fuel and chemical production. As there is a strong interest in performing many of these reduction reactions in strongly acidic solutions to increase the reaction rate, efficiency, or selectivity, there is also a great interest in enabling efficient and stable OER in strongly acidic solutions. In this study, we report stable photoelectrochemical OER (POER) of a BiVO 4 photoanode in 0.1 M HNO 3 (pH 1). This was achieved by using Nb 2 O 5 as a protection layer. While Nb 2 O 5 was rarely used as a protection layer for photoelectrodes in the past, we show its excellent capability to suppress both the chemical and photoelectrochemical dissolution of BiVO 4 at pH 1. After stabilizing BiVO 4 with a Nb 2 O 5 protection layer, we added Co 2+ ions to the electrolyte as an OER catalyst to enhance the POER. We found that Co (aq) 2+ can serve as a homogeneous OER catalyst without being deposited as a CoO x solid catalyst on Nb 2 O 5 . When we performed the POER using unprotected BiVO 4 with Co (aq) 2+ under the same condition, although POER was enhanced, the enhancement could not be sustained due to the chemical dissolution of BiVO 4 . After the POER, we found that a Co 3+ -containing OER catalyst was deposited on the bare BiVO 4 surface. This result suggested that the use of Co 2+ ions as a homogeneous catalyst was possible due to the inertness of the Nb 2 O 5 surface toward the adsorption or deposition of Co ions. This study enabling stable POER of BiVO 4 in 0.1 M HNO 3 using the combination of a Nb 2 O 5 protection layer and Co (aq) 2+ as a homogeneous OER catalyst provides promising possibilities for acidic POER and OER.

Catalysts↗

Detecting Cage Crossing and Filling Clusters of Magnesium and Carbon Atoms in Zeolite SSZ-13 with Atom Probe Tomography

The conversion of methanol to valuable hydrocarbon molecules is of great commercial interest, as the process serves as a sustainable alternative for the production of, for instance, the base chemicals for plastics. The reaction is catalyzed by zeolite materials. By the introduction of magnesium as a cationic metal, the properties of the zeolite, and thereby the catalytic performance, are changed. With atom probe tomography (APT), nanoscale relations within zeolite materials can be revealed: i.e., crucial information for a fundamental mechanistic understanding. We show that magnesium forms clusters within the cages of zeolite SSZ-13, while the framework elements are homogeneously distributed. These clusters of just a few nanometers were analyzed and visualized in 3-D. Magnesium atoms seem to initially be directed to the aluminum sites, after which they aggregate and fill one or two cages in the zeolite SSZ-13 structure. The presence of magnesium in zeolite SSZ-13 increases the lifetime as well as the propylene selectivity. By using operando UV–vis spectroscopy and X-ray diffraction techniques, we are able to show that these findings are related to the suppression of aromatic intermediate products, while maintaining the formation of polyaromatic compounds. Further nanoscale analysis of the spent catalysts showed indications of magnesium redistribution after catalysis. Unlike zeolite H-SSZ-13, for which only a homogeneous distribution of carbon was found, carbon can be either homogeneously or heterogeneously distributed within zeolite Mg-SSZ-13 crystals as the magnesium decreases the coking rate. Carbon clusters were isolated, visualized, and analyzed and were assumed to be polyaromatic compounds. Small one-cage-filling polyaromatic compounds were identified; furthermore, large-cage-crossing aromatic molecules were found by isolating large coke clusters, demonstrating the unique coking mechanism in zeolite SSZ-13. Short-length-scale evidence for the formation of polyaromatic compounds at acid sites is discovered, as clear nanoscale relations between aluminum and carbon atoms exist.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Equilibrium-Driven Formation of Single-Sized Nanocrystals: Reaction Media Tuning CdSe Magic-Sized versus Regular Quantum Dots

A concept for the fundamental science of nanoparticle synthesis, thermodynamic equilibrium-driven formation of colloidal single-sized nanoparticle ensembles, is proposed and demonstrated in this manuscript, which addresses the controlled formation of CdSe magic-sized and regular quantum dots (MSQDs and RQDs). During formation, the former are magic-sized nuclei without further growth in size, while the latter experience nucleation and growth. Both MSQDs and RQDs exhibit bandgap emission, while the former have homogeneous spectra broadening only and the latter both homogeneous and inhomogeneous spectra broadening. The former are single-sized and the latter have size distribution. With continuous and homogeneous nucleation, the thermodynamically driven formation of MSQDs was realized via our one-pot noninjection approach, which features highly synthetic reproducibility and large-scale capability. With the proper tuning of the synthetic parameters, such as the nature of the reaction medium, that affect the thermodynamic equilibria, various CdSe MSQDs and RQDs were synthesized discriminately under otherwise identical synthetic formulation and reaction conditions; the reaction media were noncoordinating 1-octadecene, coordinating trioctylphosphine, and mixtures of the two. The nature of Cd precursors, affected also by the reaction media, plays a major role in the formation of MSQDs versus RQDs. The present investigation on the thermodynamically driven formation of CdSe single-sized nanoparticles via tuning of the reaction medium, mainly, brings novel insights into the formation mechanism and into the surface ligands of the resulting colloidal nanocrystals. More importantly, the present study provides novel experimental design and approaches to single-sized nanoparticles desired for various applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of ice particle size vertical inhomogeneity on the passive remote sensing of ice clouds

The solar reflectance bi-spectral (SRBS) and infrared split-window (IRSpW) methods are two of the most popular techniques for passive ice cloud property retrievals from multispectral imagers. Ice clouds are usually assumed to be vertically homogeneous in global operational algorithms based on these methods, although significant vertical variations of ice particle size are typically observed in ice clouds. In this study we investigate uncertainties in retrieved optical thickness, effective particle size, and ice water path introduced by a homogeneous cloud assumption in both the SRBS and IRSpW methods, and focus on whether the assumption can lead to significant discrepancies between the two methods. The study simulates the upwelling spectral radiance associated with vertically structured clouds and passes the results through representative SRBS and IRSpW retrieval algorithms. Cloud optical thickness is limited to values for which IRSpW retrievals are possible (optical thickness less than about 7). When the ice cloud is optically thin and yet has a significant ice particle size vertical variation, it is found that both methods tend to underestimate the effective radius and ice water path. The reason for the underestimation is the nonlinear dependence of ice particle scattering properties (extinction and single scattering albedo) on the effective radius. Because the nonlinearity effect is stronger in the IRSpW than the SRBS method, the IRSpW-based IWP tends to be smaller than the SRBS counterpart. When the ice cloud is moderately optically thick and ice particle size increases monotonically towards cloud base, the two methods are in qualitative agreement; in the event that ice particle size decreases towards cloud base, the effective radius and ice water path retrievals based on the SRBS method are substantially larger than those from the IRSpW. The main findings of this study suggest that the homogenous cloud assumption can affect the SRBS and IRSpW methods to different extents and, consequently, can lead to significantly different retrievals. Therefore caution should be taken when comparing and combining the ice cloud property retrievals from these two methods.

54 ENVIRONMENTAL SCIENCES↗

Examination of turbulent entrainment-mixing mechanisms using a combined approach

Turbulent entrainment-mixing mechanisms are investigated by applying a combined approach to the aircraft measurements of three drizzling and two nondrizzling stratocumulus clouds collected over the U.S. Department of Energy's Atmospheric Radiation Measurement Southern Great Plains site during the March 2000 cloud Intensive Observation Period. Microphysical analysis shows that the inhomogeneous entrainment-mixing process occurs much more frequently than the homogeneous counterpart, and most cases of the inhomogeneous entrainment-mixing process are close to the extreme scenario, having drastically varying cloud droplet concentration but roughly constant volume-mean radius. It is also found that the inhomogeneous entrainment-mixing process can occur both near the cloud top and in the middle level of a cloud, and in both the nondrizzling clouds and nondrizzling legs in the drizzling clouds. A new dimensionless number, the scale number, is introduced as a dynamical measure for different entrainment-mixing processes, with a larger scale number corresponding to a higher degree of homogeneous entrainment mixing. Further empirical analysis shows that the scale number that separates the homogeneous from the inhomogeneous entrainment-mixing process is around 50, and most legs have smaller scale numbers. Thermodynamic analysis shows that sampling average of filament structures finer than the instrumental spatial resolution also contributes to the dominance of inhomogeneous entrainment-mixing mechanism. The combined microphysical-dynamical-thermodynamic analysis sheds new light on developing parameterization of entrainment-mixing processes and their microphysical and radiative effects in large-scale models.

54 ENVIRONMENTAL SCIENCES↗

Parameterizations of Entrainment-Mixing Mechanisms and their Effects on Cloud Droplet Spectral Width Based on Numerical Simulations

Entrainment-mixing mechanisms significantly affect cloud droplet number concentration, radius, and spectral shape. Quantitative examination of entrainment-mixing effects on cloud droplet spectral width is lacking. Here, we examine the effects of entrainment-mixing processes on cloud microphysics by 12,218 different setups, each simulated 10 times using the Explicit Mixing Parcel Model (EMPM) driven by the observational data from the Third Tibetan Plateau Atmospheric Scientific Experiment (TIPEX-III) campaign. Parameterizations of entrainment-mixing mechanisms are developed by relating homogeneous mixing degree to transition scale number that depends on the dissipation rate and droplet evaporation time scale. The correlation between relative dispersion of cloud droplet size distribution and homogeneous mixing degree changes from negative to positive with the decreasing homogeneous mixing degree. The different relationships are closely related to the competition between complete and partial droplet evaporation and the number concentration of small droplets, which are quantitatively described by two newly introduced dimensionless numbers. The competition is significantly affected by relative humidity and mixing fraction of entrained air as well as turbulence dissipation rate, but not much by cloud droplet number concentration. Especially, when relative humidity and dissipation rate are high, there is only a negative correlation. This study sheds new light on generalizing the homogeneous/inhomogeneous concept by considering relative dispersion, and also provides parameterizations of entrainment-mixing processes and relative dispersion for atmospheric models.

54 ENVIRONMENTAL SCIENCES↗

A Model Intercomparison Study to Investigate Mixing Characteristics in Non‐Precipitating Stratocumulus Clouds

Recent aircraft observations of marine stratocumulus clouds consistently showed that cloud microphysical relationships vary with altitude, indicating inhomogeneous mixing characteristics near cloud top and homogeneous mixing characteristics in mid-levels of clouds. Here, we conduct model intercomparison of an idealized, non-precipitating stratocumulus cloud to evaluate model consistency and examine whether simulations can reproduce the observed mixing characteristics. The results show that eleven large-eddy simulations with various dynamics and microphysics schemes show good agreement on the thermodynamical, microphysical, and dynamical properties of the stratocumulus-topped boundary layer in a steady state. The inter-model spread in steady-state liquid water path is significantly reduced compared to previous model intercomparison studies. This improvement might be due to better models and more consistent initial conditions than those used decades ago. In addition, most simulations, including a low-dimensional simulation, capture inhomogeneous mixing characteristics near the cloud top and homogeneous mixing characteristics inside the cloud. Moreover, simulations using Lagrangian microphysics schemes agree better with the observed mixing characteristics compared with those using the bin microphysics schemes. Since most simulations do not fully resolve the entrainment process, the apparent mixing characteristics arise from the variations in the resolved cloud properties. Our results support the vertical circulation mixing hypothesis, which suggests that homogeneous mixing characteristics in mid-levels of clouds are due to the vertical circulation of entrainment-affected and diluted parcels from the cloud top moved to lower levels.

54 ENVIRONMENTAL SCIENCES↗

Oral microbiota of periodontal health and disease and their changes after nonsurgical periodontal therapy

This study examined the microbial diversity and community assembly of oral microbiota in periodontal health and disease and after nonsurgical periodontal treatment. The V4 region of 16S rRNA gene from DNA of 238 saliva and subgingival samples of 21 healthy and 48 diseased subjects was amplified and sequenced. Among 1979 OTUs identified, 28 were overabundant in diseased plaque. Six of these taxa were also overabundant in diseased saliva. Twelve OTUs were overabundant in healthy plaque. There was a trend for disease-associated taxa to decrease and health-associated taxa to increase after treatment with notable variations among individual sites. Network analysis revealed modularity of the microbial communities and identified several health- and disease-specific modules. Ecological drift was a major factor that governed community turnovers in both plaque and saliva. Dispersal limitation and homogeneous selection affected the community assembly in plaque, with the additional contribution of homogenizing dispersal for plaque within individuals. Homogeneous selection and dispersal limitation played important roles, respectively, in healthy saliva and diseased pre-treatment saliva between individuals. Our results revealed distinctions in both taxa and assembly processes of oral microbiota between periodontal health and disease. Furthermore, the community assembly analysis has identified potentially effective approaches for managing periodontitis.

59 BASIC BIOLOGICAL SCIENCES↗

Computational prediction of new auxetic materials

Auxetics comprise a rare family of materials that manifest negative Poisson’s ratio, which causes an expansion instead of contraction under tension. Most known homogeneously auxetic materials are porous foams or artificial macrostructures and there are few examples of inorganic materials that exhibit this behavior as polycrystalline solids. It is now possible to accelerate the discovery of materials with target properties, such as auxetics, using high-throughput computations, open databases, and efficient search algorithms. Candidates exhibiting features correlating with auxetic behavior were chosen from the set of more than 67 000 materials in the Materials Project database. Poisson’s ratios were derived from the calculated elastic tensor of each material in this reduced set of compounds. We report that this strategy results in the prediction of three previously unidentified homogeneously auxetic materials as well as a number of compounds with a near-zero homogeneous Poisson’s ratio, which are here denoted “anepirretic materials”.

36 MATERIALS SCIENCE↗

A quantitative framework reveals ecological drivers of grassland microbial community assembly in response to warming

Abstract Unraveling the drivers controlling community assembly is a central issue in ecology. Although it is generally accepted that selection, dispersal, diversification and drift are major community assembly processes, defining their relative importance is very challenging. Here, we present a framework to quantitatively infer community assembly mechanisms by phylogenetic bin-based null model analysis (iCAMP). iCAMP shows high accuracy (0.93–0.99), precision (0.80–0.94), sensitivity (0.82–0.94), and specificity (0.95–0.98) on simulated communities, which are 10–160% higher than those from the entire community-based approach. Application of iCAMP to grassland microbial communities in response to experimental warming reveals dominant roles of homogeneous selection (38%) and ‘drift’ (59%). Interestingly, warming decreases ‘drift’ over time, and enhances homogeneous selection which is primarily imposed on Bacillales. In addition, homogeneous selection has higher correlations with drought and plant productivity under warming than control. iCAMP provides an effective and robust tool to quantify microbial assembly processes, and should also be useful for plant and animal ecology.

59 BASIC BIOLOGICAL SCIENCES↗

Condensed-phase biogenic-anthropogenic interactions with implications for cold cloud formation

Anthropogenic and biogenic gas emissions contribute to the formation of secondary organic aerosol (SOA). When present, soot particles from fossil-fuel combustion can acquire a coating of SOA. We investigate SOA-soot biogenic-anthropogenic interactions and their impact on ice nucleation in relation to the particles’ organic phase state. SOA particles were generated from the OH oxidation of naphthalene, α-pinene, longifolene, or isoprene, with or without presence of sulfate or soot particles. Corresponding particle glass transition (T g ) and full deliquescence relative humidity (FDRH) were estimated by a numerical diffusion model. Longifolene SOA particles are solid-like and all biogenic SOA sulfate mixtures exhibit a core-shell configuration (i.e. a sulfate-rich core coated with SOA). Biogenic SOA with or without sulfate formed ice at conditions expected for homogeneous ice nucleation in agreement with respective T g and FDRH. α-pinene SOA coated soot particles nucleated ice above the homogeneous freezing temperature with soot acting as ice nuclei (IN). At lower temperatures the α-pinene SOA coating can be semisolid inducing ice nucleation. Naphthalene SOA coated soot particles acted as IN above and below the homogeneous freezing limit, which can be explained by the presence of a highly viscous SOA phase. Our results suggest that biogenic SOA does not play a significant role in mixed-phase cloud formation and the presence of sulfate further renders this even less likely. Furthermore, anthropogenic SOA may have an enhancing effect on cloud glaciation under mixed-phase and cirrus cloud conditions compared to biogenic SOA that dominate during preindustrial times or in pristine areas.

54 ENVIRONMENTAL SCIENCES↗

Valorization of consolidated bioprocessing residues for bioplastics

This study demonstrates an organic solvent-free processing strategy to valorize consolidated bioprocessing (CBP) residues, from switchgrass and poplar biomass, into functional poly(butylene succinate) (PBS)-based biocomposites using high-shear homogenization (HSH). HSH transformed the switchgrass and poplar CBP residues (CBP-R) into fine, uniformly distributed particles and microfibers. The composites of PBS with homogenized switchgrass residues (H-CBP-R-SG) or homogenized poplar residues (H-CBP-R-P) at a 70/30 weight ratio exhibited improved processability and mechanical integrity, with the Young's modulus for the PBS/H-CBP-R-SG and PBS/H-CBP-R-P nearly doubling to 0.66 ± 0.07 GPa and 0.65 ± 0.04 GPa, respectively, compared to neat PBS (0.36 ± 0.02 GPa). Dynamic Mechanical Analysis (DMA) reveals a significant suppression of the tan δ peak magnitude, indicating that HSH-mediated physical activation facilitates stress transfer in composites typical of covalent chemical grafting systems. While the transition to a stiffness-dominated profile reduces ductility, the resulting composites exhibit the dimensional stability and resistance to thermal warping required for high-fidelity FDM 3D printing and injection molding. Beyond material performance, comprehensive techno-economic analysis (TEA) and life cycle assessment (LCA) confirmed that diverting CBP residues into composite products can improve the economic viability of the biorefinery without substantially increasing biorefinery global warming potential (GWP). At a 30 wt% blend ratio, incorporating residuals into PBS yielded a minimum selling price for the composite of $\$4.07$ per kg compared to the conventional bioplastic price of $\$5.00$ per kg. This approach aligns with circular bioeconomy principles by converting waste streams into value-added products. Furthermore, this innovative strategy addresses key challenges in bioplastic development, including cost, compatibility, and performance, while simultaneously advancing waste minimization strategies for sustainable manufacturing systems.

09 BIOMASS FUELS↗

Solubility-limited depolymerization kinetics in the glycolysis of carbonyl-containing polymers

Chemical recycling of condensation polymers is often rationalized on the basis of the intrinsic reactivity of ester and carbonate functional groups. However, under heterogeneous conditions relevant to plastic waste processing and environmental degradation, bulk depolymerization rates often diverge from trends predicted by homogeneous chemistry. Here, we investigate how polymer–solvent compatibility, catalyst strength, and phase behavior govern the heterogeneous glycolysis of carbonyl-containing polymers. Using poly(ethylene terephthalate) (PET), glycol-modified PET (PETG), and bisphenol-A polycarbonate (PC) as model systems, we examine depolymerization kinetics at 180 °C with ethylene glycol and bisphenol A as diols under both amphoteric organosalt (TBD : MSA) and strong base (TBD) catalysis. Despite substantial differences in crystallinity and glycol uptake, PET and PETG depolymerize at comparable rates under organosalt catalysis, while PC depolymerizes significantly more slowly under identical conditions. Time-resolved molecular weight analysis and thermal characterization demonstrate that these rate differences do not arise from crystallinity, swelling, or inherent carbonyl reactivity, but instead reflect solubility-limited kinetics that constrain the transition from heterogeneous to homogeneous reaction regimes. When polymer solubility is low, depolymerization remains heterogeneous and slow; when solubility is enhanced—either through increased polymer–diol compatibility or stronger base catalysis—rapid homogeneous depolymerization is observed, reversing apparent reactivity trends. These results establish solubility and phase behavior as primary determinants of depolymerization kinetics in heterogeneous polymer recycling systems. By demonstrating how catalyst selection and solvent compatibility can expose or overcome solubility limitations, this work provides mechanistic insight to design more energy-efficient and selective chemical recycling processes. More broadly, these findings suggest that polymers with limited solvent or water compatibility may resist chemical degradation in the environment, favoring fragmentation and persistence as micro- and nanoplastics. Understanding solubility-controlled depolymerization offers a pathway toward more sustainable polymer design and end-of-life chemical recovery.

Watson-Sanders, Shelby [Department of Chemistry, U↗