Brief History of Iron Evaluations in the ENDF/B Library
The report summarizes the development of the iron evaluations from ENDF/B-V to present.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The report summarizes the development of the iron evaluations from ENDF/B-V to present.
This is one of a series of reports produced as a result of the Co-Optimization of Fuels & Engines (Co-Optima) project, a Department of Energy (DOE)-sponsored multi-agency project initiated to accelerate the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines. The simultaneous fuels and vehicles research and development is designed to deliver maximum energy savings, emissions reduction, and on-road performance.
No abstract provided.
No abstract provided.
This report will develop topics that may, resultant from successful research and development (R&D), improve the competitive position of United States coal in domestic and international markets. These topics will be exclusively focused on improvements in coal properties that can be achieved through processing of the material. As such, the discussion here will be primarily concerned with upgrading coal quality and optimizing coal properties for end use applications, as opposed to the end use technologies themselves. The objective of this report is the highlighting of the potential for R&D to produce more competitive coal products for existing markets, as well as opportunities for the production of feedstocks for other markets, including those that are emergent.
This document outlines and summarized the configuration management process that was used for the RHLLW Disposal Facility design and turnover to operations in support of process readiness reviews. The project was originally solicited as a design-build-operate contract, but awarded as a design-build project only to Areva Federal Services in 2014. The RHLLW requirements were captured in two documents: 1) SPC-1437, Design-Build-Operate Performance Specification for the Remote-Handled Low-Level Waste Disposal Project; and 2) TFR-483, Technical and Functional Requirements for the Remote-Handled Low-Level Waste Disposal Project. TFR-483 and SPC-1437 outlined the requirements for the facility and SPC-1437 documented additional requirements regarding quality, design, and construction. A Code of Record (COR) was generated during conceptual design and updated during final design to document the design-basis codes and standards (INL/EXT-10-20044).
This report documents and describes the tabulation and analysis of historical pulse operation data from the Annular Core Research Reactor (ACRR) at Sandia National Laboratories (SNL). The pulse data was obtained from a combination of pulse log files generated at the control console and pulse diagnostics system data. The pulses presented were performed within the time period of April 2003 and December 2017. A brief analysis of the data is included to characterize the aggregate behavior of ACRR pulses with respect to theoretical treatments based on the point reactor kinetics model. It is expected that the data presented will provide an organized and consolidated resource to reference historical pulse data at the ACRR for use in analyses, verification and validation, and general understanding of the machine. A comprehensive set of data is presented to the reader in the appendices.
The dawn of the Nuclear Age occurred on the morning of July 16,1945, when Los Alamos conducted the Trinity test. Scientists and engineers from the U.S., Britain, and Canada proved the feasibility of weaponizing energy from plutonium nuclear fission using an implosion mechanism.
Fermilab’s Accelerator Physics Center (APC) was created in June 2007 with mission to carry out research and development to keep the US leading high-energy physics laboratory at the forefront of accelerator science, technology and facility operation. In support of the FNAL high-energy physics research mission, APC scientists and enginners conducted accelerator R&D aimed at next-generation and beyond accelerator facilities; provided accelerator physics support for existing operational programs and the evolution thereof; trained accelerator scientists and engineer and established experimental programs for a broad range of accelerator R&D that can be accessed by both Fermilab staff and the US and world HEP community. APC was a center-place for in-depth design, research and development efforts which allowed the Laboratory to make intelligent decisions on the ILC in the US, on the Muon Collider, as well as originate projects like PIP-II (through the Proton Driver/Project-X work), LHC-AUP (via LARP) and the IOTA/FAST R&D facility. APC was also the birthplace and host of many national and international collaborations and several educational/training programs in beam physics resulted in 27 PhD theses. In the Fall 2018, following an important milestone of the first beam circulating in the IOTA ring, the APC was re-organized into several departments in Accelerator Division, charged to carry out the accelerator physics research with IOTA/FAST beams and making it relevant for future upgrades of the Fermilab accelerator complex.
No abstract provided.
This report provides an overview of the research activities conducted over the three-year period, October 1, 2015 to September 30, 2018. The project consisted of the US DOE component and a parallel project funded by the UK’s EPSRC. The US project is reported here, with some overview of the UK project results. The project was designed to be highly collaborative, including work in the US by Washington State University and Rutgers University, and in the UK by the University of Sheffield and the University of Warwick. Pacific Northwest National Laboratory supported the US project with some synthesis and some characterization. The overall program had two aims: (Aim 1) Understand fundamental mechanisms of the phase transitions leading to the conversion of melt to multiphase glass-ceramic as a function of composition and cooling rate; (Aim 2) Understand influence of glass chemistry on kinetics of phase separation and crystallization. This report includes the summary of the project objectives, approaches, results and deliverables.
This document summarily provides brief descriptions of the MELCOR code enhancement made between code revision number 9496 and 11932. Revision 9496 represents the last official code release; therefore, the modeling features described within this document are provided to assist users that update to the newest official MELCOR code release, 11932. Along with the newly updated MELCOR Users' Guide and Reference Manual, users will be aware and able to assess the new capabilities for their modeling and analysis applications.
Quantifying the fissile content within trace amounts of nuclear material is of significant importance to safeguards and nuclear forensics communities. Traditionally, measurement methods have relied on destructive analysis (DA) measurements or passive detection of gamma/neutron signatures through nondestructive assay (NDA). These methods are highly accurate and employed globally as both a nuclear forensics capability and a material accountability measurement. However, common DA techniques rely on sample dissolution, a time-consuming process which can be particularly difficult for certain sample matrices, such as melt-glass formed from nuclear fallout. Likewise, trace quantities of nuclear materials prove difficult to measure using passive NDA techniques due to relatively low emission rates and potential interference from activated materials within the sample matrix.
In the United States, uranium 10 wt.% molybdenum (U10Mo) alloy has been selected as the nuclear fuel that will be used when transitioning research reactors and radioisotope production facilities from highly enriched uranium (>85% 235 U) fuel to low-enriched uranium (<20% 235 U) fuel. The fabrication steps for producing U10Mo fuel foil involve multiple hot-rolling/cold-rolling/intermediate annealing steps. The U10Mo alloy, which can retain the desirable high-temperature body-centered cubic γ-U (A2) structure at room temperature as a metastable phase for optimum in-reactor performance, goes through a eutectoid reaction below ~560°C and forms a-U as a reaction product, which is highly undesirable. Because the fabrication steps are carried out in the temperature range of 500 to 700°C, it is critical to understand the eutectoid reaction kinetics as a function of rolling/annealing steps. In this study, we determined the eutectoid transformation behavior of various rolled/annealed U10Mo coupons at 450, 500, and 525°C. The results show that the highest degree of phase transformation occurs when the U10Mo billet is rolled down from the as-cast condition without any prior homogenization treatment. Further, we observed that mechanical deformation (in the form of hot-rolling/cold-rolling) leads to increased eutectoid transformation compared to the billets that were not deformed.
For many years malicious cyber actors have been targeting the industrial control systems (ICS) that manage our critical infrastructures. Most of these events are not reported to the public, and the threats and incidents to ICS are not as well-known as enterprise cyber threats and incidents. This paper is a brief study of publically reported cyber threats to critical infrastructure that sheds light on the growing cyber threats to ICS devices. It is important to note that this list is not all inclusive. The events selected in this study highlight the significant threats and incidents to industrial control systems and demonstrate that significant cyber incidents to ICS devices are growing and becoming more complex.
This document summarily provides brief descriptions of the MELCOR code enhancement made between code revision number 11932 and 14959. Revision 11932 represents the last official code release; therefore, the modeling features described within this document are provided to assist users that update to the newest official MELCOR code release, 14959. Along with the newly updated MELCOR Users' Guide and Reference Manual, users will be aware and able to assess the new capabilities for their modeling and analysis applications.
This document summarily provides brief descriptions of the MELCOR code enhancement made between code revision number 11932 and 14959. Revision 11932 represents the last official code release; therefore, the modeling features described within this document are provided to assist users that update to the newest official MELCOR code release, 14959. Along with the newly updated MELCOR Users' Guide and Reference Manual, users will be aware and able to assess the new capabilities for their modeling and analysis applications. Following the official release an addendum section has been added to this report detailing modifications made to the official release which support the accompanying patch release. The addendums address user reported issues and previously known issues within the official code release which extends the original Quick look document to also support the patch release. Furthermore, the addendums section documents the recent changes to input records in the Users' Guide applicable to the patch release and corrects a few issues in the revision 14959 release as well.
We seek to improve our ability to predict and understand the Richtmyer-Meshkov (RM) unstable dynamics of explosively shocked isolated features interfaced with vacuum or gases, and an HE products cavity. Explosively shocked features form as 2D or 3D RM phenomena. Liquid cavitation cause cavitation bubbles when shockwaves collide, and cavitation waves from wave interactions with isolated features form that source mass into the RM unstable sheets or spikes, and the cavitation waves may slice through bulk material into the HE products cavity.