Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HALL EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

The stability of two-phase flow over a swept-wing

We use numerical and asymptotic techniques to study the stability of a two-phase air/water flow above a flat porous plate. This flow is a model of the boundary layer which forms on a yawed cylinder and can be used as a useful approximation to the air flow over swept wings during heavy rainfall. We show that the interface between the water and air layers can significantly destabilize the flow, leading to traveling wave disturbances which move along the attachment line. This instability occurs for lower Reynolds numbers than in the case of the absence of a water layer. We also investigate the instability of inviscid stationary modes. We calculate the effective wavenumber and orientation of the stationary disturbance when the fluids have identical physical properties. Using perturbation methods we obtain corrections due to a small stratification in viscosity, thus quantifying the interfacial effects. Our analytical results are in agreement with the numerical solution which we obtain for arbitrary fluid properties.

Coward, Adrian↗
NASA NTRS1998

Turbulent Radiation Effects in HSCT Combustor Rich Zone

A joint UTRC-University of Connecticut theoretical program was based on describing coupled soot formation and radiation in turbulent flows using stretched flamelet theory. This effort was involved with using the model jet fuel kinetics mechanism to predict soot growth in flamelets at elevated pressure, to incorporate an efficient model for turbulent thermal radiation into a discrete transfer radiation code, and to couple die soot growth, flowfield, and radiation algorithm. The soot calculations used a recently developed opposed jet code which couples the dynamical equations of size-class dependent particle growth with complex chemistry. Several of the tasks represent technical firsts; among these are the prediction of soot from a detailed jet fuel kinetics mechanism, the inclusion of pressure effects in the soot particle growth equations, and the inclusion of the efficient turbulent radiation algorithm in a combustor code.

Hall, Robert J.↗
NASA NTRS1999

Alterations of p53 in tumorigenic human bronchial epithelial cells correlate with metastatic potential

The cellular and molecular mechanisms of radiation-induced lung cancer are not known. In the present study, alterations of p53 in tumorigenic human papillomavirus-immortalized human bronchial epithelial (BEP2D) cells induced by a single low dose of either alpha-particles or 1 GeV/nucleon (56)Fe were analyzed by PCR-single-stranded conformation polymorphism (SSCP) coupled with sequencing analysis and immunoprecipitation assay. A total of nine primary and four secondary tumor cell lines, three of which were metastatic, together with the parental BEP2D and primary human bronchial epithelial (NHBE) cells were studied. The immunoprecipitation assay showed overexpression of mutant p53 proteins in all the tumor lines but not in NHBE and BEP2D cells. PCR-SSCP and sequencing analysis found band shifts and gene mutations in all four of the secondary tumors. A G-->T transversion in codon 139 in exon 5 that replaced Lys with Asn was detected in two tumor lines. One mutation each, involving a G-->T transversion in codon 215 in exon 6 (Ser-->lle) and a G-->A transition in codon 373 in exon 8 (Arg-->His), was identified in the remaining two secondary tumors. These results suggest that p53 alterations correlate with tumorigenesis in the BEP2D cell model and that mutations in the p53 gene may be indicative of metastatic potential.

Non-NASA Center↗
DOE OSTI2020

Structure of the Neutron with Quasi-Elastic Scattering from 3H and 3HE

The magnetic form factor characterizes the magnetic distribution inside the neutron and knowledge of it is essential for the understanding of the neutron structure. The E12-11-112 experiment aimed to measure the neutron magnetic form factor (GnM) from the 3H/3He cross sections ratio, in the Q2 range of 0.5 - 3 GeV2. Quasi-elastic (QE) electron scattering was used to probe nucleons on the nucleus of the mirror 3H and 3He nuclei, in Hall A at the Thomas Jefferson National Accelerator Facility (JLab). The use of the mirror nuclei ratio is a novel extraction that cancels several systematic uncertainties from the cross section effects in the ratio. The motivation of this measurement is the disagreement between the precision measurements among the Q2 range of 0.5 - 1 GeV2 in the worldwide data. A total of five Q2 points were taken between this region and four more were taken with a Q2>1 GeV2 in order to estimate the accuracy of the method. Ideally, the 3H/3He ratio should be enough to calculate the magnetic form factor, but due to nuclear effects, there will be a correction of up to 8 % depending on the Q2 value that has to be evaluated before the form factor extraction. The cross sections were measured with a point-to-point uncertainty of 3 - 4.5 %, and the ratios were also evaluated with an uncertainty of 1.5 - 3 %. Therefore, the preliminary studies of the Gn M are summarized, and from the present analysis, it can be concluded that the precision of the measurement in the region of interest will be of the order of 1.5%.

Santiesteban, Sandra↗
DOE OSTI2022

Hybrid Functional Calculations for Antimony Doping in CdTe

CdTe-based solar cells are leading thin-film photovoltaic technology, with efficiencies over 22%, but still much lower than the theoretical maximum of 29%. Further improvements will rely on increasing the open-circuit voltage Voc, which, in turn, depends on carrier density and lifetime. Using hybrid density functional calculations, we investigate Sb doping of CdTe, focusing on its limitation as shallow acceptor and the formation of compensating AX center. Paying special attention to supercell size and effects of spin-orbit coupling, we predict an ionization energy of 116 meV in the dilute limit, much closer to recent experimental value of 103 meV from temperature-dependent Hall measurements in bulk single crystals, and in contrast to much larger values from previous calculations. We also find that the Sb-related AX centers are not major compensation centers in Sb-doped CdTe.

14 SOLAR ENERGY↗
DOE OSTI2024

Low cost switching circuit for van der Pauw resistivity and Hall measurements at various temperatures

The electrical characterization of materials, particularly superconductors, semiconductors, and those undergoing metal-insulator transitions (MITs), relies significantly on resistivity and Hall measurements as a function of temperature. The van der Pauw four-point probe method is commonly used for such measurements, which involves resistance measurements for different circuit configurations connected to sample contacts. However, repeating these measurements at different temperatures is challenging and time consuming. Here, this study introduces a novel approach utilizing a switching circuit controlled by an Arduino device and a LabVIEW program to automate resistance measurements for different electrical configurations. The effectiveness of this setup was demonstrated by testing V 2 O 3 thin film samples deposited on Al 2 O 3 (001) substrates using DC magnetron sputtering. The MIT temperature of the sample was 115 K during heating and 100 K during cooling. The sample exhibited p-type charge carriers with a Hall coefficient of 1.3 ± 0.1 x 10 -4 cm 3 /C and Hall mobility of 1.7 x 10 -1 cm 2 /V∙s, which is consistent with findings from other studies employing commercial equipment.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning the Chern number in quantum anomalous Hall insulators

A quantum anomalous Hall (QAH) state is a two-dimensional topological insulating state that has a quantized Hall resistance of h/(Ce 2 ) and vanishing longitudinal resistance under zero magnetic field (where h is the Planck constant, e is the elementary charge, and the Chern number C is an integer). The QAH effect has been realized in magnetic topological insulators and magic-angle twisted bilayer graphene. However, the QAH effect at zero magnetic field has so far been realized only for C = 1. Here we realize a well quantized QAH effect with tunable Chern number (up to C = 5) in multilayer structures consisting of alternating magnetic and undoped topological insulator layers, fabricated using molecular beam epitaxy. The Chern number of these QAH insulators is determined by the number of undoped topological insulator layers in the multilayer structure. Moreover, we demonstrate that the Chern number of a given multilayer structure can be tuned by varying either the magnetic doping concentration in the magnetic topological insulator layers or the thickness of the interior magnetic topological insulator layer. We develop a theoretical model to explain our experimental observations and establish phase diagrams for QAH insulators with high, tunable Chern number. Furthermore, the realization of such insulators facilitates the application of dissipationless chiral edge currents in energy-efficient electronic devices, and opens up opportunities for developing multi-channel quantum computing and higher-capacity chiral circuit interconnects.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Estimating epistemic uncertainty in soil parameters for nonlinear site response analyses: Introducing the Latin Hypercube Sampling technique

This study quantifies the effects of epistemic uncertainty in soil parameters on nonlinear (NL) site response analysis (SRA) results, validated against the data recorded at a well-instrumented geotechnical downhole array located in Japan. To this end, a one-dimensional soil column model of the Service Hall Array (SHA) near the Kashiwazaki-Kariwa Nuclear Power Plant (KKNPP) is developed using the finite element (FE) program LS-DYNA. The dynamic stress–strain relationship is characterized by a modified two-stage hyperbolic (MTH) NL backbone curve formulation capable of capturing soil behavior at both small- and large-shear strains. The model is then validated against the ground motion recordings to capture the model bias. The uncertainties associated with the shear-wave velocity profile (a small-strain soil property) and soil shear strength (a large-strain soil property) are incorporated in NL SRA to quantify their separate and joint randomization effects on the results. This study proposes using the Latin Hypercube Sampling (LHS) method as an efficient alternative to commonly used methods, such as Standard Monte Carlo (SMC), to account for uncertainty propagation in such reliability analysis. Both low-intensity and design-level records from the recordings at the SHA are applied to study the contribution of the small- and large-strain NL dynamic soil properties. Results from 46,200 NL FE analyses (23,100 per input motion) are presented. Measured and predicted site response, using recorded ground motions at this downhole array, is compared to assess the significance of soil parameter uncertainty on the observed ground motion dispersions. It is demonstrated that increasing the number of soft realizations and implementing higher level earthquake intensity lead to higher ground motion dispersion. Unlike past studies in randomization of Vs profiles with the SMC method, the LHS method is shown to have no significant effect on the predicted median surface response spectra and amplification factors (AFs) for this case study.

Engineering↗
NASA NTRS1977

A wind tunnel technique for determining stability derivatives from cable mounted aeroelastic models

System identification techniques in common use for extracting stability derivatives from flight test data have been adapted for application to data obtained from aeroelastically-scaled flutter models flown in a wind tunnel on a cable mount system. The concept has been applied with reasonable success to data from rigid models of a Space Shuttle Orbiter and a fighter tested in the NASA Langley transonic dynamics tunnel. Further application of this technique should permit extraction of derivatives that include scaled flexibility effects, thereby obtaining additional information from the testing of expensive flutter models.

Bennett, R. M.↗
NASA NTRS2016

Evidence for the Thermal Sunyaev Zeldovich Effect Associated with Quasar Feedback

Using a radio-quiet subsample of the Sloan Digital Sky Survey spectroscopic quasar catalogue, spanning redshifts 0.5-3.5, we derive the mean millimetre and far-infrared quasar spectral energy distributions (SEDs) via a stacking analysis of Atacama Cosmology Telescope and Herschel-Spectral and Photometric Imaging REceiver data. We constrain the form of the far-infrared emission and find 3 sigma-4 sigma evidence for the thermal Sunyaev-Zel'dovich (SZ) effect, characteristic of a hot ionized gas component with thermal energy (6.2 plus or minus 1.7) × 10 (exp 60) erg. This amount of thermal energy is greater than expected assuming only hot gas in virial equilibrium with the dark matter haloes of (1-5) × 10(exp 12) h(exp −1) solar mass that these systems are expected to occupy, though the highest quasar mass estimates found in the literature could explain a large fraction of this energy. Our measurements are consistent with quasars depositing up to (14.5 +/- 3.3)tau (sub 8)(exp -1) per cent of their radiative energy into their circumgalactic environment if their typical period of quasar activity is tau(sub 8) x 108 yr. For high quasar host masses, approximately 10(exp 13) h(exp −1) solar mass, this percentage will be reduced. Furthermore, the uncertainty on this percentage is only statistical and additional systematic uncertainties enter at the 40 per cent level. The SEDs are dust dominated in all bands and we consider various models for dust emission. While sufficiently complex dust models can obviate the SZ effect, the SZ interpretation remains favoured at the 3 sigma-4 sigma level for most models.

Sunyaev-Zeldovich (SZ)↗
DOE OSTI2022

Electric control of a canted-antiferromagnetic Chern insulator

Abstract The interplay between band topology and magnetism can give rise to exotic states of matter. For example, magnetically doped topological insulators can realize a Chern insulator that exhibits quantized Hall resistance at zero magnetic field. While prior works have focused on ferromagnetic systems, little is known about band topology and its manipulation in antiferromagnets. Here, we report that MnBi 2 Te 4 is a rare platform for realizing a canted-antiferromagnetic (cAFM) Chern insulator with electrical control. We show that the Chern insulator state with Chern number C = 1 appears as the AFM to canted-AFM phase transition happens. The Chern insulator state is further confirmed by observing the unusual transition of the C = 1 state in the cAFM phase to the C = 2 orbital quantum Hall states in the magnetic field induced ferromagnetic phase. Near the cAFM-AFM phase boundary, we show that the dissipationless chiral edge transport can be toggled on and off by applying an electric field alone. We attribute this switching effect to the electrical field tuning of the exchange gap alignment between the top and bottom surfaces. Our work paves the way for future studies on topological cAFM spintronics and facilitates the development of proof-of-concept Chern insulator devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Tuning the many-body interactions in a helical Luttinger liquid

In one-dimensional (1D) systems, electronic interactions lead to a breakdown of Fermi liquid theory and the formation of a Tomonaga-Luttinger Liquid (TLL). The strength of its many-body correlations can be quantified by a single dimensionless parameter, the Luttinger parameter K, characterising the competition between the electrons’ kinetic and electrostatic energies. Recently, signatures of a TLL have been reported for the topological edge states of quantum spin Hall (QSH) insulators, strictly 1D electronic structures with linear (Dirac) dispersion and spin-momentum locking. Here we show that the many-body interactions in such helical Luttinger Liquid can be effectively controlled by the edge state’s dielectric environment. This is reflected in a tunability of the Luttinger parameter K, distinct on different edges of the crystal, and extracted to high accuracy from the statistics of tunnelling spectra at tens of tunnelling points. The interplay of topology and many-body correlations in 1D helical systems has been suggested as a potential avenue towards realising non-Abelian parafermions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1981

Acoustic lens is gas-filled

Fluorocarbon gas contained by plastic membrane is effective lens for sound waves. In tests, lens substantially improved accuracy of sound "maps" of turbulent airflow. It could also be used to record sound intensity patterns in design of speakers, lecture halls, and auditoriums. Lens is fabricated by clamping together two membranes of thin plastic and filling enclosed space with fluorocarbon gas. Since speed of sound in gas is considerably less than in air, lens refracts and focuses sound waves, analogous to focusing light by glass lens. Focal length is adjusted simply by changing gas pressure, which changes lens curvature.

Kendall, J. M., Jr.↗
DOE OSTI2022

Epitaxial growth, magnetoresistance, and electronic band structure of GdSb magnetic semimetal films

Motivated by observations of extreme magnetoresistance (XMR) in bulk crystals of rare-earth monopnictide (RE-V) compounds and emerging applications in novel spintronic and plasmonic devices based on thin-film semimetals, we have investigated the electronic band structure and transport behavior of epitaxial GdSb thin films grown on III-V semiconductor surfaces. The Gd 3 + ion in GdSb has a high spin S=7/2 and no orbital angular momentum, serving as a model system for studying the effects of antiferromagnetic order and strong exchange coupling on the resulting Fermi surface and magnetotransport properties of RE-Vs. Here, we present a surface and structural characterization study mapping the optimal synthesis window of thin epitaxial GdSb films grown on III-V lattice-matched buffer layers via molecular-beam epitaxy. To determine the factors limiting XMR in RE-V thin films and provide a benchmark for band-structure predictions of topological phases of RE-Vs, the electronic band structure of GdSb thin films is studied, comparing carrier densities extracted from magnetotransport, angle-resolved photoemission spectroscopy (ARPES), and density-functional theory (DFT) calculations. ARPES shows a hole-carrier rich, topologically trivial, semimetallic band structure close to complete electron-hole compensation, with quantum confinement effects in the thin films observed through the presence of quantum-well states. DFT-predicted Fermi wave vectors are in excellent agreement with values obtained from quantum oscillations observed in magnetic field-dependent resistivity measurements. An electron-rich Hall coefficient is measured despite the higher hole-carrier density, attributed to the higher electron Hall mobility. The carrier mobilities are limited by surface and interface scattering, resulting in lower magnetoresistance than that measured for bulk crystals.

36 MATERIALS SCIENCE↗
NASA NTRS2014

How to Make a Microgravity Drop Tower for Your Classroom

Microgravity is quite often seen as exotic and special as astronauts float around in the International Space Station, eating MM's in mid-air, and performing science experiments, all done seemingly without gravity being present. Surprisingly enough, up on the ISS there is about 90 of the same gravity that holds you to the floor in your classroom or museum exhibit hall. Participate in this session and you will understand that and more. You can use simple devices to demonstrate microgravity conditions in your classroom or museum exhibit hall. This will be the same microgravity condition that astronauts experience on the ISS, just for a much shorter period of time. Contrary to popular opinion of some people, microgravity is NOT caused by zero gravity up there. Microgravity on the ISS is due to free fall within the Earth's gravitational field. That means you can drop an item in free fall in your classroom and museum exhibit hall and that item will experience microgravity. In this session, a short theory segment will explain and reinforce these concepts so that you may explain to others. The session will concentrate on showing the session participants how to make an effective, but inexpensive, drop tower for use in the classroom. Such a drop tower may be used to reinforce classroom instruction in physics and forces motion as well as serve as a platform for student investigations, classroom competitions, and student science or technology fair entries. Session participants will build their own simple microgravity experiment and operate them in a drop tower, compare results, and modify their experiment based on results. This material is also useful for public demonstrations at school open houses, travelling museum exhibits, fixed museum exhibits, and independent student projects or experiments. These free fall concepts also connect terrestrial demonstrations with planetary moon motion, comet trajectory, and more.

forces↗
DOE OSTI2021

Effects of 5-Ion Beam Irradiation and Hindlimb Unloading on Metabolic Pathways in Plasma and Brain of Behaviorally Tested WAG/Rij Rats

A limitation of simulated space radiation studies is that radiation exposure is not the only environmental challenge astronauts face during missions. Therefore, we characterized behavioral and cognitive performance of male WAG/Rij rats 3 months after sham-irradiation or total body irradiation with a simplified 5-ion mixed beam exposure in the absence or presence of simulated weightlessness using hindlimb unloading (HU) alone. Six months following behavioral and cognitive testing or 9 months following sham-irradiation or total body irradiation, plasma and brain tissues (hippocampus and cortex) were processed to determine whether the behavioral and cognitive effects were associated with long-term alterations in metabolic pathways in plasma and brain. Sham HU, but not irradiated HU, rats were impaired in spatial habituation learning. Rats irradiated with 1.5 Gy showed increased depressive-like behaviors. This was seen in the absence but not presence of HU. Thus, HU has differential effects in sham-irradiated and irradiated animals and specific behavioral measures are associated with plasma levels of distinct metabolites 6 months later. The combined effects of HU and radiation on metabolic pathways in plasma and brain illustrate the complex interaction of environmental stressors and highlights the importance of assessing these interactions.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2019

Single-Crystal Synthesis and Characterization of Copper-Intercalated ZrTe 5

Herein is presented the synthesis and characterization of copper-intercalated zirconium pentatelluride (ZrTe 5 ). ZrTe 5 :Cu 0.05 crystals are synthesized by the chemical vapor transport method in a vacuum. X-ray diffraction and elemental analysis techniques are utilized to validate the synthesis. The results indicate that the intercalation of the layered Zr/Te structure with copper atoms causes the contraction of the unit cell along all three crystalline directions, the shrinkage of the overall volume of the unit cell, and the distortion of the unit cell. A single crystal was isolated, mechanically exfoliated, and used for the measurements of intercalation strains in a Hall bar device. Electronic transport studies indicate that an anomalous resistance drop is observed at T = 19 K. Furthermore, R xx and R xy results, respectively, indicate a probable disorder-induced localization effect and electron-type carriers.

36 MATERIALS SCIENCE↗