Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Function Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

ILC Damping Rings: Benefit of the Antechamber or: Antechamber vs. SEY

We present simulation results of the build-up of the electron-cloud density ne for the two proposed ILC damping ring lattices, DC04 and DSB3, with particular attention to the potential benefit of an antechamber. We examine a field-free region and a dipole bending magnet, with or without an antechamber. We assume a secondary electronemission model for the chamber surface based on approximate fits to measured data for TiN, except that we let the peak value of the secondary emission yield (SEY), delta max, be a variable. We conclude that there is a critical value of delta max below which the antechamber provides a substantial benefit, roughly a factor ~;;40 reduction in ne relative to the case in which max exceeds the critical value. We estimate the steady-state value of ne as a function of delta max, and thereby obtain the critical value of delta max for all cases considered. Thus, from the perspective of the electron-cloud effect, the inclusion of an antechamber in the design is justified only if delta max is below the critical value. The results presented here constitute a slight extension of those previously presented in March and September, 2010 [1, 2].

43 PARTICLE ACCELERATORS↗

Model Identification for Optimal Diesel Emissions Control

In this paper we develop a model based con- troller for diesel emission reduction using system identification methods. Specifically, our method minimizes the downstream readings from a production NOx sensor while injecting a minimal amount of urea upstream. Based on the linear quadratic estimator we derive the closed form solution to a cost function that accounts for the case some of the system inputs are not controllable. Our cost function can also be tuned to trade-off between input usage and output optimization. Our approach performs better than a production controller in simulation. Our NOx conversion efficiency was 92.7% while the production controller achieved 92.4%. For NH3 conversion, our efficiency was 98.7% compared to 88.5% for the production controller.

Stevens, Andrew J.↗

Evaluating Safeguards Benefits of Process Monitoring as compared with Nuclear Material Accountancy

This paper illustrates potential safeguards benefits that process monitoring (PM) may have as a diversion deterrent and as a complementary safeguards measure to nuclear material accountancy (NMA). This benefit is illustrated by quantifying the standard deviation associated with detecting a considered material diversion scenario using either an NMA-based method or a PM-based approach. To illustrate the benefits of PM for effective safeguards, we consider a reprocessing facility. We assume that the diversion of interest for detection manifests itself as a loss of Pu caused by abnormally operating a dissolver for an extended period to accomplish protracted diversion (or misdirection) of Pu to a retained (unconditioned) waste stream. For detecting the occurrence of this diversion (which involves anomalous operation of the dissolver), we consider two different data evaluation and integration (DEI) approaches, one based on NMA and the other based on PM. The approach based on PM does not directly do mass balance calculations, but rather monitors for the possible occurrence of anomaly patterns related to potential loss of nuclear material. It is thus assumed that the loss of a given mass amount of nuclear material can be directly associated with the execution of proliferation-driven activities that trigger the occurrence of an anomaly pattern consisting of series of events or signatures occurring at different unit operations and time instances. By effectively assessing these events over time and space, the PM-based DEI approach tries to infer whether this specific pattern of events has occurred and how many times within a given time period. To evaluate the goodness of PM, the 3 Sigma of the estimated mass loss is computed under both DEI approaches as function of the number of input batches processed. Simulation results are discussed.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Method of solar power prediction

Techniques for estimating direct and diffuse sunlight reaching a location as a function of time using color whole sky images are provided. In one aspect, a method for forecasting solar insolation is provided that includes the steps of: obtaining color whole sky images using a digital camera which are taken at different times, and wherein an image of a solar disk is present in at least one of the color whole sky images; creating sky transparency images from the color whole sky images; determining atmospheric solar scattering based on a width of the solar disk in the color whole sky images; determining cloud motion trajectories from a time series of the sky transparency images; and calculating the solar insolation as a function of time using the sky transparency, the atmospheric solar scattering, and the cloud motion trajectories. A system for forecasting solar insolation is also provided.

Hamann, Hendrik F.↗

Material Properties and Temperature Effects Quantified for Slurry Wear - 16141

Literature indicates that the hardness of solid particles relative to the target material hardness and temperature influence erosion. Investigations of temperature effects on erosion also show that erosion resistance is a function of target material's homologous temperature to melting point temperature. While relative hardness effects on erosion and temperature effects on erosion have been investigated independently, their combined effect has not been evaluated. This paper summarizes a review of relevant literature on relative hardness and temperature effects on erosion and via probabilistic calculations, quantifies the combined effect of relative hardness and temperature on liquid-particle induced wear, or slurry wear. These insights can assist material selection and plant operations at waste processing facilities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of reaction atmosphere on structural and optical properties of hexagonal molybdenum oxide (h-MoO{sub 3})

The present work aims to synthesize single phase h-MoO{sub 3} nanocrytals by chemical precipitation method exposed under different reaction atmospheres. The reaction atmosphere have been successfully tuned as air, nitrogen and argon and studied its effects on structural, functional, morphology and optical properties by using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and diffuse reflectance spectroscopy (DRS) measurements. The XRD result indicates that the sample exhibits characteristic hexagonal phase of MoO{sub 3}. The crystallite size is estimated by well known Scherrer’s method. The crystallite size is relative small in the case of sample prepared at argon atmosphere. The functional groups such as Mo-O, N-H and O-H are identified from FT-IR spectroscopy. The particle exhibits rod like morphology with perfect hexagonal cross-section. The optical absorption observed at 420-450 nm corresponds to fundamental optical absorption by h-MoO{sub 3}. The band gap values are estimated using Kublka-Munk (K-M) function and found to be 2. 87 eV, 2.93 eV and 2.97 eV for samples synthesized under air, nitrogen and argon, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accurate adiabatic correction in the hydrogen molecule

A new formalism for the accurate treatment of adiabatic effects in the hydrogen molecule is presented, in which the electronic wave function is expanded in the James-Coolidge basis functions. Systematic increase in the size of the basis set permits estimation of the accuracy. Numerical results for the adiabatic correction to the Born-Oppenheimer interaction energy reveal a relative precision of 10{sup −12} at an arbitrary internuclear distance. Such calculations have been performed for 88 internuclear distances in the range of 0 < R ⩽ 12 bohrs to construct the adiabatic correction potential and to solve the nuclear Schrödinger equation. Finally, the adiabatic correction to the dissociation energies of all rovibrational levels in H{sub 2}, HD, HT, D{sub 2}, DT, and T{sub 2} has been determined. For the ground state of H{sub 2} the estimated precision is 3 × 10{sup −7} cm{sup −1}, which is almost three orders of magnitude higher than that of the best previous result. The achieved accuracy removes the adiabatic contribution from the overall error budget of the present day theoretical predictions for the rovibrational levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bootstrapping outperforms community‐weighted approaches for estimating the shapes of phenotypic distributions

Abstract Estimating phenotypic distributions of populations and communities is central to many questions in ecology and evolution. These distributions can be characterized by their moments (mean, variance, skewness and kurtosis) or diversity metrics (e.g. functional richness). Typically, such moments and metrics are calculated using community‐weighted approaches (e.g. abundance‐weighted mean). We propose an alternative bootstrapping approach that allows flexibility in trait sampling and explicit incorporation of intraspecific variation, and show that this approach significantly improves estimation while allowing us to quantify uncertainty. We assess the performance of different approaches for estimating the moments of trait distributions across various sampling scenarios, taxa and datasets by comparing estimates derived from simulated samples with the true values calculated from full datasets. Simulations differ in sampling intensity (individuals per species), sampling biases (abundance, size), trait data source (local vs. global) and estimation method (two types of community‐weighting, two types of bootstrapping). We introduce the traitstrap R package, which contains a modular and extensible set of bootstrapping and weighted‐averaging functions that use community composition and trait data to estimate the moments of community trait distributions with their uncertainty. Importantly, the first function in the workflow, trait_fill , allows the user to specify hierarchical structures (e.g. plot within site, experiment vs. control, species within genus) to assign trait values to each taxon in each community sample. Across all taxa, simulations and metrics, bootstrapping approaches were more accurate and less biased than community‐weighted approaches. With bootstrapping, a sample size of 9 or more measurements per species per trait generally included the true mean within the 95% CI. It reduced average percent errors by 26%–74% relative to community‐weighting. Random sampling across all species outperformed both size‐ and abundance‐biased sampling. Our results suggest randomly sampling ~9 individuals per sampling unit and species, covering all species in the community and analysing the data using nonparametric bootstrapping generally enable reliable inference on trait distributions, including the central moments, of communities. By providing better estimates of community trait distributions, bootstrapping approaches can improve our ability to link traits to both the processes that generate them and their effects on ecosystems.

Maitner, Brian S.↗

Measurement of the isolated diphoton cross section in p p collisions at s = 7 TeV with the ATLAS detector

Here, the ATLAS experiment has measured the production cross section of events with two isolated photons in the final state, in proton-proton collisions at √s = 7 TeV. The full data set acquired in 2010 is used, corresponding to an integrated luminosity of 37 pb –1 . The background, consisting of hadronic jets and isolated electrons, is estimated with fully data-driven techniques and subtracted. The differential cross sections, as functions of the di-photon mass (m γγ ), total transverse momentum (pT, γγ ), and azimuthal separation (ΔΦ γγ ), are presented and compared to the predictions of next-to-leading-order QCD.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

QCD analysis of the semi-inclusive COMPASS and HERMES data

The first moments of polarized valence parton distribution functions truncated to the wide Bjorken x region 0.004 < x < 0.7 are directly (without any fitting procedure) extracted in the NLO QCD from combined semi-inclusive DIS data of COMPASS and HERMES collaborations. Two scenarios for fragmentation functions are considered. Applying the proposed original procedure to these results we estimate the contributions of sea u and d quarks to the proton spin, which turn out to be simply zero within the errors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Estimating f{sub NL} and g{sub NL} from massive high-redshift galaxy clusters

There are observations of at least 14 high-redshift massive galaxy clusters, which have an extremely small probability with a purely Gaussian initial curvature perturbation. Here we revisit the estimation of the contribution of non-Gaussianities to the cluster mass function and point out serious problems that have resulted from the application of the mass function out of the range of its validity. We remedy the situation and show that the values of f{sub NL} previously claimed to completely reconcile (i.e. at ∼ 100% confidence) the existence of the clusters with ΛCDM are unphysically small. However, for WMAP cosmology and at 95% confidence, we arrive at the limit f{sub NL}∼>411, which is similar to previous estimates. We also explore the possibility of a large g{sub NL} as the reason for the observed excess of the massive galaxy clusters. This scenario, g{sub NL} > 2 × 10{sup 6}, appears to be in more agreement with CMB and LSS limits for the non-Gaussianity parameters and could also provide an explanation for the overabundance of large voids in the early universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Seismoacoustic Analysis of Chemical Explosions at the Nevada National Security Site

In recent years, two sets of chemical explosions have been conducted at the Nevada National Security Site (NNSS): 6 explosions from Phase I of the Source Physics Experiment (SPE) and 4 explosions from the Forensics Surface Events (FSE). We have estimated the explosive yield and depth-of-burial/height-of-burst of both from the synthesis of seismic and low-frequency acoustic data. Analysis of the seismic signal is performed using a waveform envelope technique. Using seismic data only, however, there is a tradeoff between the yield and depth or height of the explosion, which becomes especially acute for near-surface events. This tradeoff between yield and depth/height can be broken by including complementary analysis of the acoustic signal using the acoustic waveform inversion method. The acoustic signal also has a strong tradeoff between a yield and depth/height, but the slope is opposite that of the seismic for near-surface events. We use a likelihood function to combine the seismic and acoustic analysis and improve our estimates of yield and depth/height for these sets of explosions. The results are generally consistent with the known parameters, but can be improved upon by higher-frequency seismic analysis and improved acoustic impulse scaling for large scaled depths-of-burial. These events serve as prime examples of data fusion from multiple data streams. The challenge will be to apply the method to events at longer regional distances where the seismic signals will include phases traveling in the upper mantle, and the acoustic signals will be recorded as infrasound signals, which are subject to atmospheric variability.

58 GEOSCIENCES↗

Thermodynamic estimation: Ionic materials

Thermodynamics establishes equilibrium relations among thermodynamic parameters (“properties”) and delineates the effects of variation of the thermodynamic functions (typically temperature and pressure) on those parameters. However, classical thermodynamics does not provide values for the necessary thermodynamic properties, which must be established by extra-thermodynamic means such as experiment, theoretical calculation, or empirical estimation. While many values may be found in the numerous collected tables in the literature, these are necessarily incomplete because either the experimental measurements have not been made or the materials may be hypothetical. The current paper presents a number of simple and relible estimation methods for thermodynamic properties, principally for ionic materials. The results may also be used as a check for obvious errors in published values. The estimation methods described are typically based on addition of properties of individual ions, or sums of properties of neutral ion groups (such as “double” salts, in the Simple Salt Approximation), or based upon correlations such as with formula unit volumes (Volume-Based Thermodynamics). - Graphical abstract: Thermodynamic properties of ionic materials may be readily estimated by summation of the properties of individual ions, by summation of the properties of ‘double salts’, and by correlation with formula volume. Such estimates may fill gaps in the literature, and may also be used as checks of published values. This simplicity arises from exploitation of the fact that repulsive energy terms are of short range and very similar across materials, while coulombic interactions provide a very large component of the attractive energy in ionic systems. Display Omitted - Highlights: • Estimation methods for thermodynamic properties of ionic materials are introduced. • Methods are based on summation of single ions, multiple salts, and correlations. • Heat capacity, entropy, lattice energy, enthalpy, Gibbs energy values are available.

36 MATERIALS SCIENCE↗

Collective properties of the final state in processes involving the production of hadron jets

Experimental results obtained by studying soft hadron jets in pion-proton and pion-nucleus reactions at intermediate energies with the aid of traditional collective variables are presented. Analytic approximations that describe, at a qualitative level, the dependences of collective parameters on the energy and multiplicity are proposed. Estimates obtained for strong coupling constant by studying collective variables are in reasonable agreement with its world-average value and with the results extracted by using different methods. The behavior of traditional collective variables as functions of the multiplicity in various interactions makes it possible to obtain a universal estimate for the lower boundary of the region of experimental manifestations of jets in multiparticle-production processes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

CHIRP-Like Signals: Estimation, Detection and Processing A Sequential Model-Based Approach

Chirp signals have evolved primarily from radar/sonar signal processing applications specifically attempting to estimate the location of a target in surveillance/tracking volume. The chirp, which is essentially a sinusoidal signal whose phase changes instantaneously at each time sample, has an interesting property in that its correlation approximates an impulse function. It is well-known that a matched-filter detector in radar/sonar estimates the target range by cross-correlating a replicant of the transmitted chirp with the measurement data reflected from the target back to the radar/sonar receiver yielding a maximum peak corresponding to the echo time and therefore enabling the desired range estimate. In this application, we perform the same operation as a radar or sonar system, that is, we transmit a “chirp-like pulse” into the target medium and attempt to first detect its presence and second estimate its location or range. Our problem is complicated by the presence of disturbance signals from surrounding broadcast stations as well as extraneous sources of interference in our frequency bands and of course the ever present random noise from instrumentation. First, we discuss the chirp signal itself and illustrate its inherent properties and then develop a model-based processing scheme enabling both the detection and estimation of the signal from noisy measurement data.

42 ENGINEERING↗

BROADBAND PHOTOMETRIC REVERBERATION MAPPING OF NGC 4395

We present results of broadband photometric reverberation mapping (RM) to measure the radius of the broad-line region, and subsequently the black hole mass (M{sub BH}), in the nearby, low-luminosity active galactic nuclei NGC 4395. Using the Wise Observatory's 1 m telescope equipped with the Sloan Digital Sky Survey g', r', and i' broadband filters, we monitored NGC 4395 for nine consecutive nights and obtained three light curves each with over 250 data points. The g' and r' bands include time variable contributions from H{beta} and H{alpha}, respectively, plus continuum. The i' band is free of broad lines and covers exclusively continuum. We show that by looking for a peak in the difference between the cross-correlation and the auto-correlation functions for all combinations of filters, we can get a reliable estimate of the time lag necessary to compute M{sub BH}. We measure the time lag for H{alpha} to be 3.6 {+-} 0.8 hr, comparable to previous studies using the line-resolved spectroscopic RM method. We argue that this lag implies a black hole mass of M{sub BH} = (4.9 {+-} 2.6) Multiplication-Sign 10{sup 4} M{sub Sun }.

79 ASTRONOMY AND ASTROPHYSICS↗

Monotonically convergent optimization in quantum control using Krotov's method

The non-linear optimization method developed by A. Konnov and V. Krotov [Autom. Remote Cont. (Engl. Transl.) 60, 1427 (1999)] has been used previously to extend the capabilities of optimal control theory from the linear to the non-linear Schroedinger equation [S. E. Sklarz and D. J. Tannor, Phys. Rev. A 66, 053619 (2002)]. Here we show that based on the Konnov-Krotov method, monotonically convergent algorithms are obtained for a large class of quantum control problems. It includes, in addition to nonlinear equations of motion, control problems that are characterized by non-unitary time evolution, nonlinear dependencies of the Hamiltonian on the control, time-dependent targets, and optimization functionals that depend to higher than second order on the time-evolving states. We furthermore show that the nonlinear (second order) contribution can be estimated either analytically or numerically, yielding readily applicable optimization algorithms. We demonstrate monotonic convergence for an optimization functional that is an eighth-degree polynomial in the states. For the ''standard'' quantum control problem of a convex final-time functional, linear equations of motion and linear dependency of the Hamiltonian on the field, the second-order contribution is not required for monotonic convergence but can be used to speed up convergence. We demonstrate this by comparing the performance of first- and second-order algorithms for two examples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Using higher moments of fluctuations and their ratios in the search for the QCD critical point

The QCD critical point can be found in heavy-ion collision experiments via the nonmonotonic behavior of many fluctuation observables as a function of the collision energy. The event-by-event fluctuations of various particle multiplicities are enhanced in those collisions that freeze-out near the critical point. Higher, non-Gaussian, moments of the event-by-event distributions of such observables are particularly sensitive to critical fluctuations, since their magnitude depends on the critical correlation length to a high power. We present quantitative estimates of the contribution of critical fluctuations to the third and fourth moments of the pion, proton and net proton multiplicities, as well as estimates of various measures of pion-proton correlations, all as a function of the same five nonuniversal parameters, one of which is the correlation length that parametrizes proximity to the critical point. We show how to use nontrivial but parameter-independent ratios among these more than a dozen fluctuation observables to discover the critical point. We also construct ratios that, if the critical point is found, can be used to overconstrain the values of the nonuniversal parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗