Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Finite Element Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Using the Stix finite element RF code to investigate operation optimization of the ICRF antenna on Alcator C-Mod

Abstract As the Ion Cyclotron Radio Frequency range (ICRF) heating becomes more favorable in fusion devices, the urgency of predicting and mitigating impurity generation that arises from it becomes more pressing. In the ICRF regime, rectified Radio Frequency (RF) sheaths are known to form at antenna and material edges that influence negative effects like sputtering and a decrease in heating efficiency. Methods to mitigate the formation of these RF sheaths through RF image currents cancellation have been experimentally studied. A power-phasing scan done on Alcator C-Mod in which the amount of power on the two inner straps ( P in ) versus the total 4 straps ( P tot ) was varied showed a minimization of enhanced potentials between P in / P tot ∼ 0.7–0.9 while impurities were minimized for P in / P tot ∼ 0.5–0.8. New capabilities in the realm of representing the RF sheath numerically now allow for these experiments to be simulated. Given the size of the sheath relative to the scale of the device, it can be approximated as a Boundary Condition (BC). A new parallelized cold-plasma wave equation solver called Stix implements a non-linear sheath impedance model BC formulated by Myra et al (2015 Phys. Plasmas 22 062507) through the method of finite elements using the MFEM library [ http://mfem.org ]. It is seen that Stix shows qualitative agreement with the measured C-Mod enhanced potentials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of Pore Distributions on Ductility of Thin-Walled High Pressure Die-Cast Magnesium

In this paper, a microstructure-based three-dimensional (3D) finite element modeling method is adopted to investigate the effects of porosity in thin-walled high pressure die-cast (HPDC) Magnesium alloys on their ductility. For this purpose, the cross-sections of AM60 casting samples are first examined using optical microscope and X-ray tomography to obtain the general information on the pore distribution features. The experimentally observed pore distribution features are then used to generate a series of synthetic microstructure-based 3D finite element models with different pore volume fractions and pore distribution features. Shear and ductile damage models are adopted in the finite element analyses to induce the fracture by element removal, leading to the prediction of ductility. The results in this study show that the ductility monotonically decreases as the pore volume fraction increases and that the effect of ‘skin region’ on the ductility is noticeable under the condition of same local pore volume fraction in the center region of the sample and its existence can be beneficial for the improvement of ductility. The further synthetic microstructure-based 3D finite element analyses are planned to investigate the effects of pore size and pore size distribution.

Ductility↗

Modeling prismatic HTGRs with U.S. N.R.C advanced gas reactor evaluator (AGREE)

A core fluids and heat transfer model has been developed for the prismatic high temperature gas reactor in support of the US NRC Next Generation Nuclear Plant (NGNP) evaluation model. The core fluids modeling relies on a subchannel approach in which the primary coolant flow path through the core region and vertical in-core and ex-core gaps can be modeled as individual subchannels. These subchannels are connected together to represent a three dimensional reactor. An initial validation calculation for the core fluids model has been performed using data available in literature for bypass flow. The predicted bypass flow was within 2.6% of the value reported in the literature. The core level heat transfer model is based on a triangular finite volume method, where the base triangle is one sixth of the prismatic block. In order to improve the spatial accuracy at this level, a triangular refinement method was also implemented. The fuel compact temperature is calculated by a cylindrical conduction model which is implicitly coupled to the triangular core level model. The preliminary verification of the model was performed by comparing AGREE to a finite element code COMSOL by analyzing the MHTGR core heat transfer. Further verification and validation is currently an ongoing effort. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Parallel projection—An improved return mapping algorithm for finite element modeling of shape memory alloys

Here, we present a novel finite element analysis of inelastic structures containing Shape Memory Alloys (SMAs). Phenomenological constitutive models for SMAs lead to material nonlinearities, that require substantial computational effort to resolve. Finite element analysis methods, which rely on Gauss quadrature integration schemes, must solve two sets of coupled differential equations: one at the global level and the other at the local, i.e. Gauss point level. In contrast to the conventional return mapping algorithm, which solves these two sets of coupled differential equations separately using a nested Newton procedure, we propose a scheme to solve the local and global differential equations simultaneously. In the process we also derive closed-form expressions used to update the internal/constitutive state variables, and unify the popular closest-point and cutting plane methods with our formulas. Numerical testing indicates that our method allows for larger thermomechanical loading steps and provides increased computational efficiency, over the standard return mapping algorithm.

42 ENGINEERING↗

Analytical determination of the constitutive behavior from micro-pillar testing: Application to a tempered martensitic steel

Micro-compression experiments were carried out on micro-pillars, with nominal diameter of 10 μm and height 20 μm, and fabricated from a high-chromium tempered martensitic steels developed for nuclear applications. An analytical method was proposed to calculate the imposed compressive displacement on the pillar that allows determining the constitutive behavior up to about 5% of plastic strain. The experimental micro-compression curves were showed to be adequately modeled by the finite element simulations, which were used to validate the main assumption considered for the analytical model development.

36 MATERIALS SCIENCE↗

A generalized anisotropic deformation formulation for geomaterials

In this paper, the Combined Finite-Discrete Element Method (FDEM) has been applied to analyze the deformation of anisotropic geomaterials. In the most general case geomaterials are both nonhomogeneous and non-isotropic. With the aim of addressing anisotropic material problems, improved 2D FDEM formulations have been developed. These formulations feature the unified hypo-hyper elastic approach combined with a multiplicative decomposition-based selective integration for volumetric and shear deformation modes. This approach is significantly different from the co-rotational formulations typically encountered in finite element codes. Unlike the corotational formulation, the multiplicative decomposition-based formulation naturally decomposes deformation into translation, rotation, plastic stretches, elastic stretches, volumetric stretches, shear stretches, etc. This approach can be implemented for a whole family of finite elements from solids to shells and membranes. This novel 2D FDEM based material formulation was designed in such a way that the anisotropic properties of the solid can be specified in a cell by cell basis, therefore enabling the user to seed these anisotropic properties following any type of spatial variation, for example, following a curvilinear path. In addition, due to the selective integration, there are no problems with volumetric or shear locking with any type of finite element employed.

58 GEOSCIENCES↗

Bending of five-layer beams with crosswise corrugated main core

The subject of the study is one orthotropic thin-walled sandwich beam with trapezoidal core and two-layer facings. The outer layers of facings are flat, but inner layers are trapezoidal corrugated. The main core of the beam is also trapezoidal corrugated – in perpendicular direction to the corrugation of inner layers of facings. The beam is with lengthwise corrugated layers and crosswise corrugated main core. The mathematical and physical model of this beam is formulated, and also the field of displacements. The system of equilibrium equations is analytically derived using the energy method. The obtained solutions will be verified numerically (FEM)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-phase Flow Regime Transition Study using Level-Set Method

In Boiling Water Reactors (BWRs) the coolant exiting the core often has void fractions as high as 50%, resulting in high gas volume fraction two-phase flow regimes, such as annular or churn-turbulent flow. As the coolant boils along the subchannels it will experience flow regime transitions from bubbly to slug, slug to churn, and, finally, churn to annular. While these transition points are known to occur as a higher void develops along the flow path, the driving physics of the transition phenomenon is not well understood. Currently, experiment based correlations are the most reliable method for predicting where in the core the flow regime transitions will occur. However, experimentally, it's ever difficult to observe the details of the two-phase flow at prototypical pressures/temperatures, or, as with high fidelity experiments, the conditions differ from those in a reactor. Being able to predict these flow regime transitions is critical to safe and efficient reactor operations as well as maintaining fuel rod integrity by avoiding dryout. The characterization of flow regimes has been extensively studied, producing a wide set of flow regime maps based on characteristic parameters such as vapor and liquid superficial velocity, time dependent pressure drop, interfacial area density, etc. While these studies are useful in predicting the flow regime for certain geometry and flow conditions, they do not provide a universal predictive capability for any geometry under any conditions. Additionally, it is difficult to achieve reactor realistic pressure and temperature conditions in experiments. Direct Numerical Simulation (DNS) coupled with Interface Tracking Methods (ITMs) becomes advantageous in this case because the simulations are not limited by the material properties or to the real world conditions. DNS allows for analysis of flows that would be impossible to achieve, or observe in detail, experimentally. The finite element based DNS code, PHASTA (parallel, hierarchic, higher-order accurate, adaptive, stabilized transient analysis flow solver), used in this work utilizes the level set ITM and has been previously shown to properly resolve bubbly, slug, and annular flows, but not transitions between the two-phase flow regimes. The present work uses PHASTA to analyze flow in a pipe for various void fractions and superficial velocities. Flow regime transitions were induced to demonstrate the transient behavior of this phenomenon. With the unique advanced analysis capabilities developed in PHASTA that allow for individual bubble tracking, it becomes possible to extract new localized information about the flow behavior that is currently not attainable from experiments. The potential of this capability is to uncover the underlying physics of the flow regime transition phenomenon. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Numerical Solution of Problems in Calculus of Variations by Homotopy Perturbation Method

In this work we use Homotopy Perturbation Method (HPM) to solve differential equations that arise in variational problems. To illustrate the method some examples are provided. The results show the efficiency and accuracy of the HPM. HPM can be considered an alternative method to Adomian decomposition method. Both of these methods can obtain analytic form of the solution in some cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning piezoresistive transduction in nanomechanical resonators by geometrical asymmetries

The effect of geometrical asymmetries on the piezoresistive transduction in suspended double clamped beam nanomechanical resonators is investigated. Tapered silicon nano-beams, fabricated using a fast and flexible prototyping method, are employed to determine how the asymmetry affects the transduced piezoresistive signal for different mechanical resonant modes. This effect is attributed to the modulation of the strain in pre-strained double clamped beams, and it is confirmed by means of finite element simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Graphic Processor Realization of the Formal Solution of the Problem of Radiation Transfer in the Neutron Star Atmosphere

The realization (on the CUDA platform) of the search for the formal solution to the problem of radiation transfer in the strongly magnetized plasma in the atmosphere of a neutron star on graphic processors with the CUDA architecture. The solution is obtained using the Galerkin method with finite elements. The realization of graphic processors makes it possible to substantially accelerate computations in constructing models for the atmospheres of neutron stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Damage development in neutron-irradiated concrete in a test reactor: Hygro-thermal and mechanical simulations

This paper reports the development of a 3D mesoscale hygro-thermal-mechanical simulation approach to predict damage in concrete irradiated in a test reactor. This framework, developed in MOOSE, considers the effects of elevated temperature, moisture content, and high neutron fluence (energy threshold, E > 0.1 MeV) on the mortar and aggregates separately. The first-stage simulation implements hygro-thermal analysis to determine the temperature and RH inside the specimen as a function of imposed radiation energy. These are used as inputs to the second stage, which considers radiation-induced volumetric expansion (RIVE) of aggregates, and creep, shrinkage, and stress-strain response of mortar to predict the expansion, stresses, and damage in specimens made using different coarse aggregates and subjected to different irradiation times. The irradiation time-dependent damage in the mortar is expressed using an isotropic damage parameter. This multi-physics model serves as a predictive tool for damage quantification in concrete due to neutron irradiation.

36 MATERIALS SCIENCE↗

WE-AB-BRA-02: Development of Biomechanical Models to Describe Dose-Volume Response to Liver Stereotactic Body Radiation Therapy (SBRT) Patients

Purpose: Previous studies have shown that radiotherapy treatment for liver metastases causes marked liver hypertrophy in areas receiving low dose and atrophy/fibrosis in areas receiving high dose. The purpose of this work is to develop and evaluate a biomechanical model-based dose-response model to describe these liver responses to SBRT. Methods: In this retrospective study, a biomechanical model-based deformable registration algorithm, Morfeus, was expanded to include dose-based boundary conditions. Liver and tumor volumes were contoured on the planning images and CT/MR images three months post-RT and converted to finite element models. A thermal expansion-based relationship correlating the delivered dose and volume response was generated from 22 patients previously treated. This coefficient, combined with the planned dose, was applied as an additional boundary condition to describe the volumetric response of the liver of an additional cohort of metastatic liver patients treated with SBRT. The accuracy of the model was evaluated based on overall volumetric liver comparisons and the target registration error (TRE) using the average deviations in positions of identified vascular bifurcations on each set of registered images, with a target accuracy of the 2.5mm isotropic dose grid (vector dimension 4.3mm). Results: The thermal expansion coefficient models the volumetric change of the liver to within 3%. The accuracy of Morfeus with dose-expansion boundary conditions a TRE of 5.7±2.8mm compared to 11.2±3.7mm using rigid registration and 8.9±0.28mm using Morfeus with only spatial boundary conditions. Conclusion: A biomechanical model has been developed to describe the volumetric and spatial response of the liver to SBRT. This work will enable the improvement of correlating functional imaging with delivered dose, the mapping of the delivered dose from one treatment onto the planning images for a subsequent treatment, and will further provide information to assist with the biological characterization of patients’ response to radiation.

60 APPLIED LIFE SCIENCES↗

Frequency analysis of uncertain structures using imprecise probability

Two new methods for finite element based frequency analysis of a structure with uncertainty are developed. An imprecise probability formulation based on enveloping p-boxes is used to quantify the uncertainty present in the mechanical characteristics of the structure. For each element, independent variations are considered. Using the two developed methods, P-box Frequency Analysis (PFA) and Interval Monte-Carlo Frequency Analysis (IMFA), sharp bounds on natural circular frequencies at different probability levels are obtained. These methods establish a framework for handling incomplete information in structural dynamics. Numerical example problems are presented that illustrate the capabilities of the new methods along with discussions on their computational efficiency.

97 MATHEMATICS AND COMPUTING↗

Pronghorn Theory Manual

This manual is intended to provide a thorough description of the governing equations, the relations used for material, heat transfer, and fluid flow parameters, and the numerical method utilized in Pronghorn.

42 ENGINEERING↗

Uncertainty Analysis on the Design of Thermal Conductivity Measurement by a Guarded Cut-Bar Technique

A technique adapted from the guarded-comparative-longitudinal heat flow method was selected for the measurement of the thermal conductivity of a nuclear fuel compact over a temperature range characteristic of its usage. This technique fulfills the requirement for non-destructive measurement of the composite compact. Although numerous measurement systems have been created based on the guarded comparative method, comprehensive systematic (bias) and measurement (precision) uncertainty associated with this technique have not been fully analyzed. In addition to the geometric effect in the bias error, which has been analyzed previously, this paper studies the working condition which is another potential error source. Using finite element analysis, this study showed the effect of these two types of error sources in the thermal conductivity measurement process and the limitations in the design selection of various parameters by considering their effect on the precision error. The results and conclusions provide valuable reference for designing and operating an experimental measurement system using this technique.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Predicting the Influence of Pore Characteristics on Ductility of Thin-Walled High Pressure Die Casting Magnesium

In this paper, a two-dimensional microstructure-based finite element modeling method is adopted to investigate the effects of porosity in thin-walled high pressure die casting Mg materials on their ductility. For this purpose, the cross-sections of AM50 and AM60 casting samples are first examined using optical microscope to obtain the overall information on the pore characteristics. The experimentally quantified pore characteristics are then used to generate a series of synthetic microstructures with different pore sizes, pore volume fractions and pore size distributions. Pores are explicitly represented in the synthetic microstructures and meshed out for the subsequent finite element analysis. In the finite element analysis, an intrinsic critical strain value is used for the Mg matrix material, beyond which work-hardening is no longer permissible. With no artificial failure criterion prescribed, ductility levels are predicted for the various microstructures in the form of strain localization. Mesh size effect study is also conducted, from which a mesh size dependent critical strain curve is determined. A concept of scalability of pore size effects is then presented and examined with the use of the mesh size dependent critical strain curve. The results in this study show that, for the regions with lower pore size and lower volume fraction, the ductility generally decreases as the pore size and pore volume fraction increase whereas, for the regions with larger pore size and larger pore volume fraction, other factors such as the mean distance between the pores begin to have some substantial influence on the ductility. The results also indicate that the pore size effects may be scalable for the models with good-representative pore shape and distribution with the use of the mesh size dependent critical strain curve.

Sun, Xin↗