Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUORIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

SU-E-T-612: Photonuclear Activation of Prosthetic Hips in Radiotherapy

Purpose: To measure the neutron induced activation of a prosthetic hip when exposed to an 18 MV radiotherapy linac beam to assess the potential dose to patients. Methods: A prosthetic hip (Thackray, UK) was placed in a water phantom and irradiated (both in-field and out-of-field) with an 18 MV linac beam. Gamma spectroscopy was used to identify the radioisotopes produced. Following the in-field irradiation where the induced activity is higher, high sensitivity lithium fluoride Thermoluminescence Dosimeters (TLD-100H) (Harshaw, USA) were placed on the surface to measure the dose which would be deposited to nearby tissue resulting from the induced radioactivity. Results: The radioisotopes produced in the hip prosthesis have been identified as {sup 5{sup 2}}V, {sup 5{sup 3}}Fe, and {sup 56}Mn which have half-lives of 3.74, 8.51 and minutes respectively. The 378 and 511 keV characteristic peaks of {sup 5{sup 3}}Fe do not appear in the spectra collected from hips irradiated in the out-of-field region. This isotope is produced by photonuclear interactions within the hip itself. {sup 52}V and {sup 56}Mn appear in spectra collected from hips irradiated either within the photon beam or in the nearby out-of-field region, implying that they are produced by incident neutron radiation produced in components of the linear accelerator.The integrated dose which would be deposited in the tissue immediately surrounding the hip after four hours (1.5 half-lives of the longest lived product) was measured as approximately 100 µGy, following a 10,000 MU irradiation of the prosthesis. A highly accurate measurement of the dose is challenging because of the irregular shape of the prosthesis. Conclusion: The cumulative dose measured at the surface of the hip is 0.0001% of the in-field dose, and is therefore negligible compared with the doses the patient receives as a consequence of their treatment.

61 RADIATION PROTECTION AND DOSIMETRY↗

SU-F-P-47: Estimation of Skin Dose by Performing the Measurements On Cylindrical Phantom

Purpose: To evaluate the skin dose by performing the measurements on cylindrical phantom with 6X beam. Methods: A cylindrical phantom was used to best model a patient surface. The source to surface distance (SSD) was 100 cm at phantom surface along central axis (CAX). The EBT2 films were cut into 2×2 cm2 pieces. Each piece of film was placed at CAX on phantom surface for each measurement at 0°, 15°, 30°, 45°, 60°, 75°, and 90° gantry angles for field sizes of 5×5, 10×10, 15×15, and 20×20 cm{sup 2} respectively. One hundred monitor units (MU) with 6X beam were delivered for each set up. Similarly, the measurements were repeated using lithium fluoride (LiF) thermoluminescent dosimeter (TLD) chips (1X1X1 mm{sup 3}). Two TLD chips were placed for each gantry angle and field size. The calibration curves were produced for both film and TLD. The computed tomography (CT) was also performed on the same cylindrical phantom and dose was evaluated at the phantom surface using Eclipse treatment planning system ( AAA algorithm) for skin dose comparison. Results: Data showed small differences at smaller angles among EBT2, TLD and Eclipse treatment planning system. But Eclipse treatment planning system under estimated the skin dose between 20% and 50% at larger gantry angles (between 40° and 80°) at all field sizes before dose differences began to converge. Conclusion: Given this data, we can conclude that Eclipse treatment planning system under estimated the dose especially between 40 and 80 degrees of obliquity compared to the measurements results. Ideally, this study can be applied largely to head and neck patients where contours differ drastically and where skin dose is paramount.

60 APPLIED LIFE SCIENCES↗

A Holographic Prism Based on Photo-Thermo-Refractive Glass: Requirements and Possibilities

A technology for multivalued holographic measurement of a plane angle—a holographic prism, which serves as the basis for a device for calibrating the testing tools for navigational equipment under rolling— has been developed. The holographic prism is a miniature sample of photosensitive material, which contains a system of superimposed holographic gratings, and a laser the radiation of which passes through gratings to form a fan of diffracted beams. The fan in a prism based on a calcium fluoride (fluorite) crystal with color centers contained six out-of-plane beams radiating from a region with a hard-to-localize center. This fact hindered calibration of the measure and its application in the testing device. The use of photothermo-refractive glass as a material for preparing a sample and recording a system of holograms in it makes it possible to eliminate the drawbacks of fluorite-based prism. The number of holograms rises up to 21, the fan becomes in-plane, and its center is localized in a small region, with a size of several tenths of the sample thickness (1–2 mm). The fan beams are energetically homogeneous, and each can be identified when using the fan in a testing device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Influence of Temperature on the Spectral Dependences of Aluminum’s Optical Properties

Data in the literature on the optical properties of aluminum in the range of 198–1173 K are analyzed. Analytical expressions describing the dependences of aluminum permittivity on photon energy and temperature are proposed and tested. The spectral dependences of the aluminum absorption coefficient and specular reflectance at normal incidence, as well as of the absorption-efficiency coefficients of aluminum nanoparticles in a lithium-fluoride matrix, are calculated at different temperatures. The results obtained indicate the appearance of unusual nonlinear absorption effects in nanocomposites containing aluminum nanoparticles, which manifest themselves in a decrease in the absorption efficiency with increasing temperature at photon energies exceeding 1.40 eV.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Identifying Rare Earth Elements and Thorium and Uranium in Iron Oxide–Apatite Deposit of Gazestan Bafgh, Southeast of Iran

The Gazestan magnetite-apatite deposit is one of Kiruna-type deposits located 78 km from Bafgh in the province of Yazd, in the Bafgh Posht-e-Badam district, southeast of Iran. In the mining region of Bafgh, volcanic rocks and Precambrian volcano-sedimentary are the main host of iron-apatite deposits. Iron deposits are essentially located in Bafgh region inside the green acidic metamorphic rocks. Volcanic rocks are basically rhyolite and rhyodacitic and the sedimentary units are mostly made of dolomite. Rock units of the region belong to the Rizzo series. The Bafgh apatite compounds are fluoride-type and seen in the monazite mineral. The similarity of the rare earth elements pattern in all samples indicates the magma source. The most amount of rare earth elements in the Gazestan deposit include 7766.25 ppm and the most amount of Th is equal to 65.1 ppm and U is equal to 8.33 ppm. The most amount of P2O5 s equal to 26.5 wt% and Fe is equal to 61.3 wt%. Also, it can be concluded that due to their high correlation with rare earth elements, the deposit is of Uranium Thorium-bearing type.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Zinc oxide hollow microstructures and nanostructures formed under hydrothermal conditions

Zinc oxide low-dimensional hollow structures in the form of hexagonal plates with holes at the center of the {l_brace}0001{r_brace} facets are synthesized in the course of the low-temperature interaction of ZnO precursors with aqueous solutions of potassium fluoride under hydrothermal conditions. Crystals have the shape of single-walled or multiwalled 'nuts.' The high optical quality of the structures is confirmed by cathodoluminescence data at room temperature. The mechanism of the formation of ZnO 'nanonuts' and products of the interaction of the ZnO precursors with KF is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructured crystals of fluorite phases Sr{sub 1-x}R{sub x}F{sub 2+x} (R = Y, La-Lu) and their ordering: Part III. A study of the refractive indices

The refractive indices n of Sr{sub 1-x}R{sub x}F{sub 2+x} crystals (R = Y, La-Lu; 0 {<=} x {<=} 0.5) have been measured at wavelengths of 0.436, 0.546, and 0.589 {mu}m. It is established that n increases when there is an increase in the RF{sub 3} content x according to a weakly quadratic law for each R. For the isoconcentration series of Sr{sub 0.9}R{sub 0.1}F{sub 2.1} crystals, the change in n in the series of rare earth elements has a pronounced nonlinear character, which reflects the nonmonotonous change in the properties of compounds in the R series. It is shown that the method of molecular refraction additivity can be used to calculate n for Sr{sub 1-x}R{sub x}F{sub 2+x} crystals. By varying the RF{sub 3} content in them, one can obtain optical media with a gradually varied refractive index n in the range 1.44-1.55, thus filling the gap in the n values between high ones for RF{sub 3} crystals and low ones for crystals of alkaline earth fluorides MF{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructured crystals of fluorite phases Sr{sub 1-x}R{sub x}F{sub 2+x} (R are rare-earth elements) and their ordering: IV. Study of the optical transmission spectra in the 2-17-{mu}m wavelength range

Transmission spectra of two-component crystals of Sr{sub 1-x}R{sub x}F{sub 2+x} (R = Y, La-Lu; 0 {<=} x {<=} 0.5) in the 1-17-{mu}m wavelength range were studied. The spectral characteristics of these crystals and of single-component crystals of MF{sub 2} (M = Ca, Sr, or Ba) and RF{sub 3} (R = La-Nd) were compared. The transmission cutoff of Sr{sub 1-x}R{sub x}F{sub 2+x} crystals is shifted to shorter wavelengths with increasing x. The same tendency is observed with the increasing atomic number R of rare-earth elements for two isoconcentration series of Sr{sub 1-x}R{sub x}F{sub 2+x} (x {approx} 0.10 and 0.28). This tendency is pronounced at large x. The transmission cutoff of Sr{sub 1-x}R{sub x}F{sub 2+x} crystals can be varied in the range of from 10.7 to 12.2 {mu}m by changing their qualitative (R) and quantitative (x) composition. Hence, these crystals can be assigned to multicomponent fluoride optical materials with controlled optical characteristics. The Sr{sub 1-x}R{sub x}F{sub 2+x} crystals, where R = Ce-Sm, were shown to be promising materials for the design of selective optical filters in the 2-10-{mu}m spectral range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alkali metal and ammonium fluoro(trifluoroacetato)metallates M Prime [M Prime Prime {sub 3}({mu}{sub 3}-F)(CF{sub 3}COO){sub 6}(CF{sub 3}COOH){sub 3}], where M Prime = Li, Na, K, NH{sub 4}, Rb, or Cs and M Prime Prime = Ni or Co. Synthesis and crystal structures

A series of fluoro(trifluoroacetato)metallates were synthesized by crystallization from solutions in trifluoroacetic acid containing nickel(II) or cobalt(II) nitrate hydrates and alkali metal or ammonium fluorides: Li[Ni{sub 3}({mu}{sub 3}-F)(CF{sub 3}COO){sub 6}(CF{sub 3}COOH){sub 3}](CF{sub 3}COOH){sub 3} (I), M Prime [Ni{sub 3}({mu}{sub 3}-F)(CF{sub 3}COO){sub 6}(CF{sub 3}COOH){sub 3}] (M Prime = Na (II), NH{sub 4} (IV), Rb (V), and Cs (VI)), NH{sub 4}[Co{sub 3}({mu}{sub 3}-F) (CF{sub 3}COO){sub 6}(CF{sub 3}COOH){sub 3}] (III), and Cs[Ni{sub 3}({mu}{sub 3}-F)(CF{sub 3}COO){sub 6}(CF{sub 3}COOH){sub 3}](CF{sub 3}COOH){sub 0.5} (VII). The crystal structures of these compounds were determined by single-crystal X-ray diffraction. All structures contain triangular trinuclear complex anions [M{sub 3} Double-Prime ({mu}{sub 3}-F)(CF{sub 3}COO){sub 6}(CF{sub 3}COOH){sub 3}]{sup -} (M Double-Prime = Ni, Co) structurally similar to trinuclear 3d metal oxo carboxylate complexes. The three-coordinated F atom is located at the center of the triangle formed by Ni(II) or Co(II) atoms. The metal atoms are linked in pairs by six bridging trifluoroacetate groups located above and below the plane of the [M Double-Prime {sub 3} F] triangle. The oxygen atoms of the axial CF{sub 3}COOH molecules complete the coordination environment of M Double-Prime atoms to an octahedron.

36 MATERIALS SCIENCE↗

Impurity trapped exciton states related to rare earth ions in crystals under high hydrostatic pressure

Emission related to rare earth ions in solids takes place usually due to 4f{sup n} {yields} 4f{sup n} and 4f{sup n-1}5d{sup 1} {yields} 4f{sup n} internal transitions. In the case of band to band excitation the effective energy transfer from the host to optically active impurity is required. Among other processes one of the possibilities is capturing of the electron at excited state and hole at the ground state of impurity. Localization of electron or hole at the dopand site creates a long range Coulomb potential that attracts the second carrier which then occupies the localized Rydberg-like states. Such a system can be considered as impurity trapped exciton. Usually impurity trapped exciton is a short living phenomenon which decays non-radiatively leaving the impurity ion in the excited state. However, in several compounds doped with Eu{sup 2+} the impurity trapped exciton states become stable and contribute to the radiative processes though anomalous luminescence that appears apart of the 4f{sup 7} {yields} 4f{sup 7} and 4f{sup 7}5d{sup 1} {yields} 5f{sup 7} emission. In this contribution pressure effect on energies of the 4f{sup n-1}5d{sup 1}{yields}5f{sup n} transitions in Ln doped oxides and fluorides as well as influence of pressure on the energy of impurity trapped exciton states is discussed. The latest results on high pressure investigations of luminescence related to Pr{sup 3+}, and Eu{sup 2+} in different lattices are reviewed.

36 MATERIALS SCIENCE↗

Crystal structure of (NH{sub 4}){sub 5}Sc{sub 3}F{sub 14}

The equilibrium in the (NH{sub 4}){sub 3}ScF{sub 6}-NH{sub 4}HF{sub 2}-H{sub 2}O system in the range of hydrodifluoride ammonium solution concentrations of 0.05-3.5 mol/L at temperatures of 18 and 90 Degree-Sign C is studied. The composition of solid phases in equilibrium is analyzed using elemental analysis, X-ray diffraction, and neutron diffraction. A new phase, (NH{sub 4}){sub 5}Sc{sub 3}F{sub 14} with a tetragonal lattice (sp. gr. I4{sub 1}/a, unit-cell parameters a = 0.80843 nm and c = 2.5177 nm), is found at fluoride ion concentrations in the solution of {<=}1.06 mol/L at 18 Degree-Sign C and 2.92-3.01 mol/L at 90 Degree-Sign C; the crystal structure of this phase is determined.

36 MATERIALS SCIENCE↗

Fluorine-ion conductivity of different technological forms of solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (LaF{sub 3} Type ) (M = Ca, Sr, Ba; R Are Rare Earth Elements)

We have investigated the conductivity of some representatives of different technological forms of fluoride-conducting solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (M = Ca, Sr, Ba; R are rare earth elements) with an LaF{sub 3} structure: single crystals, cold- and hot-pressing ceramics based on a charge prepared in different ways (mechanochemical synthesis, solid-phase synthesis, and fragmentation of single crystals), polycrystalline alloys, etc. It is shown (by impedance spectroscopy), that different technological forms of identical chemical composition (R, M, y) exhibit different electrical characteristics. The maximum conductivity is observed for the single-crystal form of R{sub 1–y}M{sub y}F{sub 3–y} tysonite phases, which provides (in contrast to other technological forms) the formation of true volume ion-conducting characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Specific Features of the Structure and Properties of High-Temperature Oxide Materials Based on Bismuth Sodium Titanate

Single-phase ceramic samples from the region of morphotropic phase boundary in the (1–x)(Na{sub 0.5}Bi{sub 0.5})TiO{sub 3–x}BaTiO{sub 3} and (1–y)[(Na{sub 0.5}Bi{sub 0.5})TiO{sub 3–x}BaTiO{sub 3}]–yBi(Mg{sub 0.5}Ti{sub 0.5})O{sub 3} systems, modified by low-melting LiF and 0.6NaCl–0.4LiF additives, have been prepared by solid-state synthesis. The effect of additives on the phase formation, structural parameters, and dielectric and ferroelectric properties of the ceramics has been studied. A decrease in the ceramic sintering temperature is found. A slight increase in the unit-cell volume upon modification of the ceramics under study by lithium fluoride and 0.6NaCl–0.4LiF additive is revealed. First-order ferroelectric phase transitions near 700–800 K have been observed. The prospects for improving the piezoelectric properties of modified ceramic samples are proved.

36 MATERIALS SCIENCE↗

Static current-voltage characteristics of Au/CaF{sub 2}/n-Si(111) MIS tunneling structures

Using molecular-beam epitaxy, Au/CaF{sub 2}/n-Si(111) structures were fabricated that exhibit lower currents at a given fluoride film thickness (1.5-2 nm) than those of all similar structures studied. At a positive voltage at the metal, the current is in agreement with that calculated within the model with conservation of the transverse component of the wave vector during tunneling transport. Relative contributions of electron and hole components were analyzed for forward and reverse biases. The effect of the nonuniform distribution of the insulator thickness over the area on measured currents was estimated. The thin CaF{sub 2} layers that were grown are potentially applicable as barrier layers in various devices of functional electronics.

36 MATERIALS SCIENCE↗

Study of optical parameters of the Se-As chalcogenide semiconductor system containing EuF{sub 3} impurities

Optical properties of chalcogenide vitreous semiconductors of composition Se{sub 95}As{sub 5} containing different amounts of rare-earth metal fluorides (EuF{sub 3}) are studied, and, on this basis, the fundamental parameters, such as the refractive index and extinction coefficient, are determined. The dependences of these parameters on the content of EuF{sub 3} molecules are nonmonotonic: the low content (below 0.25 at %) aids in decreasing the parameters, whereas the high content tends to increase them. From the analysis of the results with consideration for the structural features of chalcogenide vitreous semiconductors of the Se{sub 95}As{sub 5} system (the presence of ordered high-coordinated microregions separated from each other by regions with a lower atomic density), it is concluded that the optical properties of the chalcogenide vitreous semiconductor system under study can be described in the context of Penn's model.

36 MATERIALS SCIENCE↗

Adaptation of the model of tunneling in a metal/CaF{sub 2}/Si(111) system for use in industrial simulators of MIS devices

An approach toward simplification of the model of the tunneling transport of electrons through a thin layer of crystalline calcium fluoride into a silicon (111) substrate with subsequent implementation in simulators of semiconductor devices is suggested. The validity of the approach is proven by comparing the results of modeling using simplified formulas with the results of precise calculations and experimental data. The approach can be applied to calculations of tunneling currents in structures with any crystalline insulators on Si (111)

36 MATERIALS SCIENCE↗

Luminescence and Stimulated Emission of Polycrystalline Cu(In,Ga)Se{sub 2} Films Deposited by Magnetron-Assisted Sputtering

The stimulated emission of Cu(In,Ga)Se{sub 2} alloy thin films formed by magnetron-assisted sputtering onto a sodium-fluoride layer deposited onto a molybdenum layer on a glass substrate is observed. The structural and optical parameters of the films are determined by scanning electron microscopy, local X-ray spectral microanalysis, X-ray structural analysis, and low-temperature luminescence (T = 10 K) measurements in the range of excitation levels of 1.6–75 kW cm{sup –2} provided by nanosecond nitrogen-laser pulses. The stimulated emission threshold corresponds to ~25 kW cm{sup –2}. Comparative analysis of the emission of Cu(In,Ga)Se{sub 2} thin films suggests that the introduction of sodium results in significant improvement of the structural quality, specifically, in a decrease in the density of energy states in the band tails and in a decrease in the concentration of nonradiative-recombination centers.

36 MATERIALS SCIENCE↗

Formation of a Thin Luminescent Layer in LiF Crystals under Glow Discharge Radiation

The formation of thin layers of luminescent defects on the faces of planar lithium fluoride crystals located in the positive column and Faraday dark space of a glow gas discharge was studied by time-resolved confocal scanning luminescent microscopy and time-correlated single photon counting. The formation of aggregated color centers in the surface layers of crystals was established using the spectral and kinetic characteristics of luminescence appearing after irradiation. The role of gas discharge electrons, ions, and photons in the defect formation mechanism was considered. The defects were shown to be formed under the influence of vacuum ultraviolet (VUV) photons. The VUV radiation intensity distribution in the discharge gap was measured by the method of thermostimulated luminescence. The main source of this radiation was the anodic and cathodic voltage drop regions in a glow discharge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗