Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Edge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Tests of Four Full-scale Propellers to Determine the Effect of Trailing-edge Extensions on Propeller Aerodynamic Characteristics

Propellers with trailing-edge extensions were studied to determine aerodynamic characteristics. Trailing-edge extension increased power absorbed by propeller with little loss in efficiency. Power coefficient for maximum efficiency was greater for 20% camber type extension than for 20% straight type extension over range of advance ratio of 1.0 to 2.5 although camber type was less efficient. Efficiency was about the same for cruising and high-speed at a high power coefficient for propeller with extension.

PROPELLERS - TRAILING EDGE, EXTENDED↗

Study on Near Edge Impact Behavior of Sandwich Panels in Support of the SLS Payload Adaptor Fitting (PAF)

This paper examines the effects of impacts near the edge of honeycomb sandwich panels compared to impacts at the center of the specimen. Instrumented impact data, NDE, cross-sectional photomicroscopy and Compression After Impact (CAI) testing were conducted. The key result is that for a given impact severity level, the CAI strength values are about the same regardless of how close the impact is to the edge of the panel.

Off Center Impacts↗

Relationship between edge localized mode severity and electron transport in the National Spherical Torus Experiment

n the National Spherical Torus Experiment [J. Menard , Nucl. Fusion 47, S645 (2007)], "giant" edge localized modes (ELMs) can occur resulting in a loss of plasma stored energy of up to 30%. These events are distinct from type I ELMs, whose energy loss is typically 4-10%, and they are accompanied by a cold pulse that causes a global decrease in the electron temperature profile. Estimates of the electron thermal transport during the cold pulses show a large enhancement over the underlying cross-field thermal diffusivity, chi(e), of up to several tens of m(2)/s. Following the ELM, short-wavelength fluctuations increase in the plasma edge and core, corresponding to an increase in the electron temperature gradient from the propagating cold pulse. Fast electron temperature measurements indicate that the normalized electron temperature scale length, R/L-Te, reaches the threshold value for instability predicted by a fit to linear stability calculations. This is observed on time scales that match the growth of the high-k fluctuations in the plasma core, indicating that the enhanced chi(e) and energy loss from the "giant" ELM appears to be related to critical gradient physics and the destabilization of electron temperature gradient modes. (C) 2008 American Institute of Physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predicting the Performance of Edge Seal Materials for PV (Presentation)

Edge seal materials were evaluated using a 100-nm film of Ca deposited on glass and laminated to another glass substrate. As moisture penetrates the package it converts the Ca metal to transparent CaOH2 giving a clear indication of the depth to which moisture has entered. Using this method, we have exposed test samples to a variety of temperature and humidity conditions ranging from 45C and 10%RH up to 85C and 85% RH, to ultraviolet radiation and to mechanical stress. We are able to show that edge seal materials are capable of keeping moisture away from sensitive cell materials for the life of a module.

14 SOLAR ENERGY↗

Manipulation of Edge‐Site Fe–N 2 Moiety on Holey Fe, N Codoped Graphene to Promote the Cycle Stability and Rate Capacity of Li–S Batteries

Abstract Graphene‐based materials have been widely studied to overcome the hurdles of Li–S batteries, but suffer from low adsorptivity to polar polysulfide species, slow mass transport of Li + ions, and severe irreversible agglomeration. Herein, via a one‐step scalable calcination process, a holey Fe, N codoped graphene (HFeNG) is successfully synthesized to address these problems. Diverging by the holey structures, the Fe atoms are anchored by four N atoms (Fe–N 4 moiety) or two N atoms (Fe–N 2 moiety) localized on the graphene sheets and edge of holes, respectively, which is confirmed by X‐ray absorption spectroscopy and density functional theory calculations. The unique holey structures not only promote the mass transport of lithium ions, but also prohibit the transportation of polysulfides across these additional channels via strong adsorption forces of Fe–N 2 moiety at the edges. The as‐obtained HFeNG delivers a high rate capacity of 810 mAh g −1 at 5 C and a stable cycling performance with the capacity decay of 0.083% per cycle at 0.5 C. The concept of holey structure and introduction of polar moieties could be extended to other carbon and 2D nanostructures for energy storage and conversion devices such as supercapacitors, alkali‐ion batteries, metal–air batteries, and metal–halogen batteries.

Wang, Yazhou↗

Atomic Mechanisms for the Si Atom Dynamics in Graphene: Chemical Transformations at the Edge and in the Bulk

The dynamic behavior of e-beam irradiated Si atoms in the bulk and at the edges of single-layer graphene is examined using scanning transmission electron microscopy (STEM). A deep learning network is used to convert experimental STEM movies into coordinates of individual Si and carbon atoms. A Gaussian mixture model is further used to establish the elementary atomic configurations of the Si atoms, defining the bonding geometries and chemical species and accounting for the discrete rotational symmetry of the host lattice. The frequencies and Markov transition probabilities between these states are determined. This analysis enables insight into the defect populations and chemical transformation networks from the atomically resolved STEM data. Here, a clear tendency is observed for the formation of a 1D Si crystal along zigzag direction of graphene edges and for the Si impurity coupling to topological defects in bulk graphene.

36 MATERIALS SCIENCE↗

Decoupling Complex Multi–Length–Scale Morphology in Non–Fullerene Photovoltaics with Nitrogen K–Edge Resonant Soft X–ray Scattering

Complex morphology in organic photovoltaics (OPVs) and other functional soft materials commonly dictates performance. Such complexity in OPVs originates from the mesoscale kinetically trapped non-equilibrium state, which governs device charge generation and transport. Resonant soft X-ray scattering (RSoXS) has been revolutionary in the exploration of OPV morphology in the past decade due to its chemical and orientation sensitivity. However, for non-fullerene OPVs, RSoXS analysis near the carbon K-edge is challenging, due to the chemical similarity of the materials used in active layers. Here, an innovative approach is provided by nitrogen K-edge RSoXS (NK-RSoXS), utilizing the spatial and orientational contrasts from the cyano groups in the acceptor materials, which allows for determination of phase separation. NK-RSoXS clearly visualizes the combined feature sizes in PM6:Y6 blends from crystallization and liquid-liquid demixing, while PM6:Y6:Y6-BO ternary blends with reduced phase-separation size and enhanced material crystallization can lead to current amplification in devices. Nitrogen is common in organic semiconductors and other soft materials, and the strong and directional N 1s → π* resonances make NK-RSoXS a powerful tool to uncover the mesoscale complexity and open opportunities to understand heterogeneous systems.

36 MATERIALS SCIENCE↗

Molybdenum Disulfide Nanoribbons with Enhanced Edge Nonlinear Response and Photoresponsivity

MoS 2 nanoribbons have attracted increased interest due to their properties, which can be tailored by tuning their dimensions. Herein, the growth of MoS 2 nanoribbons and triangular crystals formed by the reaction between films of MoOx (2 2 nanoribbons arising from distinct contributions from the single–layer edges and multilayer core. Nanoscale imaging reveals a blue-shifted exciton emission of the monolayer edge compared to the isolated MoS 2 monolayers due to built-in local strain and disorder. We further report on an ultrasensitive photodetector made of a single MoS 2 nanoribbon with a responsivity of 8.72 × 10 2 A W –1 at 532 nm, among the highest reported up-to-date for single-nanoribbon photodetectors. These findings can inspire the design of MoS 2 semiconductors with tunable geometries for efficient optoelectronic devices.

36 MATERIALS SCIENCE↗

Band edge engineering of oxide photoanodes for photoelectrochemical water splitting: Integration of subsurface dipoles with atomic-scale control

One of the crucial parameters dictating the efficiency of photoelectrochemical water-splitting is the semiconductor band edge alignment with respect to hydrogen and oxygen redox potentials. Despite the importance of metal oxides in their use as photoelectrodes, studies to control the band edge alignment in aqueous solution have been limited predominantly to compound semiconductors with modulation ranges limited to a few hundred mV. The ability to modulate the flat band potential of oxide photoanodes by as much as 1.3 V, using the insertion of subsurface electrostatic dipoles near a Nb-doped SrTiO 3 /aqueous electrolyte interface is reported. Lastly, the tunable range achieved far exceeds previous reports in any semiconductor/aqueous electrolyte system and suggests a general design strategy for highly efficient oxide photoelectrodes.

36 MATERIALS SCIENCE↗

Amphiphilic Nanoparticles Control the Growth and Stability of Lipid Bilayers with Open Edges

Molecular amphiphiles self-assemble in polar media to form ordered structures such as micelles and vesicles essential to a broad range of industrial and biological processes. Some of these architectures such as bilayer sheets, helical ribbons, and hollow tubules are potentially useful but inherently unstable owing to the presence of open edges that expose the hydrophobic bilayer core. Here, we describe a strategy to stabilize open bilayer structures using amphiphilic nanoparticle surfactants that present mixtures of hydrophilic and hydrophobic ligands on their surface. We observe that these particles bind selectively to the open edge of bilayer membranes to stabilize otherwise transient amphiphile assemblies. We show how such particles can precisely control the size of lipid tubules, how they can inhibit the formation of undesirable assemblies such as gallstone precursors, and how they can stabilize free-floating lipid microdiscs.

36 MATERIALS SCIENCE↗

Theoretical Investigation of the Oxygen Reduction Reaction over Platinum Catalysts Supported by Multi-Edged Vertically Aligned Carbon Nanofiber for Electrocatalyst Preparation

Vertically aligned carbon nanofibers (VACNFs) are promising supports for oxygen reduction reaction (ORR) electrocatalysts in fuel cells. Although experimentally these catalytic systems have shown great potential, there is lack of molecular understanding of the catalytic sites and reaction mechanisms. This work investigated the origin of the ORR reactivities of the platinum catalysts on multi-edged VACNFs (Pt/VACNF) using a multiscale modeling approach combining Density Functional Theory (DFT) and classical Molecular Dynamics (MD) simulations. Based on the ReaxFF potential, here all nanoscale Pt particles (Pt 55 , P 100 , and Pt 147 ) are stabilized by the open edges located axially along the VACNF walls. The calculated first-shell coordination numbers, CN, of surface Pt atoms are 6.63, 7.27, and 7.85, respectively, suggesting that the percentage of low coordination sites increases as the particle size decreases. The adsorption energies of OOH, O, and OH on Pt-55 were systematically probed using DFT calculations. These adsorption energies retain a linear correlation against the generalized coordination numbers ($\overline{CN}$). For Pt nanoparticles supported on VACNF, we found that the OOH and OH bind stronger than on Pt (111) by 0.14 and 0.17 eV, respectively, which can hinder the ORR activity with lower limiting potential than Pt (111). Our theoretical prediction is in good agreement with the linear sweeping voltammetry that revealed a left shift of the half-wave potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterizing Polyoxovanadate‐Alkoxide Clusters Using Vanadium K‐Edge X‐Ray Absorption Spectroscopy

Abstract A number of technologies would benefit from developing inorganic compounds and materials with specific electronic and magnetic exchange properties. Unfortunately, designing compounds with these properties is difficult because metal⋅⋅⋅metal coupling schemes are hard to predict and control. Fully characterizing communication between metals in existing compounds that exhibit interesting properties could provide valuable insight and advance those predictive capabilities. One such class of molecules are the series of Lindqvist iron‐functionalized and hexavanadium polyoxovanadate‐alkoxide clusters, which we characterized here using V K‐edge X‐ray absorption spectroscopy. Substantial changes in the pre‐edge peak intensities were observed that tracked with the V 3 d ‐electron count. The data also suggested substantial delocalization between the vanadium cations. Meanwhile, the Fe III cations were electronically isolated from the polyoxovanadate core.

Meyer, Rachel L.↗

An identity privacy scheme for blockchain‐based on edge computing

Abstract Blockchain has decentralization characteristics and requires more targeted security schemes to protect user privacy. In contrast, existing signature schemes have many high‐complexity operations and impose an enormous computational burden on wireless nodes. This article proposes a light‐weighted identity privacy scheme for blockchain‐based on edge computing. We construct linkable identity privacy and non‐linkable identity privacy, which can resist collusion attacks while virtually guaranteeing blockchain nodes' identity privacy. Since edge computing offloads heavily, the proposed scheme has lower computational complexity than the existing techniques.

Mu, Rui↗

Improved DESI-MS Performance using Edge Sampling and aRotational Sample Stage

The position of the surface to be analyzed relative to the sampling orifice or capillary into the mass spectrometer has been known to dramatically affect the observed signal levels in desorption electrospray ionization mass spectrometry (DESIMS). In analyses of sample spots on planar surfaces, DESI-MS signal intensities as much as five times greater were routinely observed when the bottom of the sampling capillary was appropriately positioned beneath the surface plane ( edge sampling") compared to when the capillary just touched the surface. To take advantage of the optimum "edge sampling" geometry and to maximize the number of samples that could be analyzed in this configuration, a rotational sample stage was integrated into a typical DESI-MS setup. The rapid quantitative determination of caffeine in two diet sport drinks (Diet Turbo Tea, Speed Stack Grape) spiked with an isotopically labeled internal standard demonstrated the utility of this approach.

47 OTHER INSTRUMENTATION↗

Edge-Mediated Annihilation of Vacancy Clusters in Monolayer Molybdenum Diselenide (MoSe 2 ) under Electron Beam Irradiation

Here annihilation of vacancy clusters in monolayer molybdenum diselenide (MoSe2) under electron beam irradiation is reported. In situ high-resolution transmission electron microscopy observation reveals that the annihilation is achieved by diffusion of vacancies to the free edge near the vacancy clusters. Monte Carlo simulations confirm that it is energetically favorable for the vacancies to locate at the free edge. By computing the minimum energy path for the annihilation of one vacancy cluster as a case study, it is further shown that electron beam irradiation and pre-stress in the suspended MoSe2 monolayer are necessary for the vacancies to overcome the energy barriers for diffusion. The findings suggest a new mechanism of vacancy healing in 2D materials and broaden the capability of electron beam for defect engineering of 2D materials, a promising way of tuning their properties for engineering applications.

2D materials↗

Single Crystalline GeSe Van Der Waals Ribbons With Uniform Layer Stacking, High Carrier Mobility, and Adjustable Edge Morphology

Abstract Performance of the group IV monochalcogenide GeSe in solar cells, electronic, and optoelectronic devices is expected to improve when high‐quality single crystalline material is used rather than polycrystalline films. Crystalline flakes represent an attractive alternative to bulk single crystals as their synthesis may be developed to be scalable, faster, and with higher overall yield. However, large – and especially large and thin – single crystal flakes are notoriously hard to synthesize. Here it is demonstrated that vapor‐liquid‐solid growth combined with direct lateral vapor‐solid incorporation produces high‐quality single crystalline GeSe ribbons with tens of micrometers size and controllable thickness. Electron microscopy shows that the ribbons exhibit perfect equilibrium (AB) van der Waals stacking order without extended defects across the entire thickness, in contrast to the conventional case of substrate‐supported flakes where material is added via layer‐by‐layer nucleation and growth on the basal plane. Electrical measurements show anisotropic transport and a high Hall mobility of 85 cm 2 V −1 s −1 , on par with the best single crystals to date. Growth from mixed GeSe and SnSe vapors, finally, yields ribbons with unchanged structure and composition but with jagged edges, promising for applications that rely on ample chemically active edge sites, such as catalysis or photocatalysis.

99 GENERAL AND MISCELLANEOUS↗

Smoky Mountain Data Challenge 2021: An Open Call to Solve Scientific Data Challenges Using Advanced Data Analytics and Edge Computing

The 2021 Smoky Mountains Computational Sciences and Engineering Conference enlists scientists from across Oak Ridge National Laboratory (ORNL) and industry to be data sponsors and help create data analytics and edge computing challenges for eminent datasets in a variety of scientific domains. This work describes the significance of each of the eight datasets and their associated challenge questions. The challenge questions for each dataset were required to cover multiple difficulty levels. An international call for participation was sent to students, asking them to form teams of up to six people and apply novel data analytics and edge computing methods to solve these challenges.

Devineni, Pravallika↗