Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Digitalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Modeling from Local to Subsystem Level Effects in Analog and Digital Circuits Due to Space Induced Single Event Transients

Single Event Transients in analog and digital electronics from space generated high energetic nuclear particles can disrupt either temporarily and sometimes permanently the functionality and performance of electronics in space vehicles. This work first provides some insights into the modeling of SET in electronic circuits that can be used in SPICE-like simulators. The work is then directed to present methodologies, one of which was developed by this author, for the assessment of SET at different levels of integration in electronics, from the circuit level to the subsystem level.

State Transistion Model.↗
NASA NTRS2015

Developing Data Citations from Digital Object Identifier Metadata

NASA's Earth Science Data and Information System (ESDIS) Project has been processing information for the registration of Digital Object Identifiers (DOI) for the last five years of which an automated system has been in operation for the last two years. The ESDIS DOI registration system has registered over 2000 DOIs with over 1000 DOIs held in reserve until all required information has been collected. By working towards the goal of assigning DOIs to the 8000+ data collections under its management, ESDIS has taken the first step towards facilitating the use of data citations with those products. Jeanne Behnke, ESDIS Deputy Project Manager has reviewed and approved the poster.

digital object idenifiers↗
NASA NTRS2016

A Statistical Analysis of the Accuracy of the Digitized Magnitudes of Photometric Plates on the Timescale of Decades with an Application to the Century-Long Light Curve of KIC 8462852

We present a statistical analysis of the accuracy of the digitized magnitudes of photometric plates on the timescale of decades. In our examination of archival Johnson B photometry from the Harvard DASCH archive, we find a median rt mean square scatter of light curves of the order of 0.15 magnitude over the range B approximately equal to 9-17 for all calibrations. Slight underlying systematics (trends or flux discontinuities) are on a level of less than or equal to 0.2 magnitudes per century (1889–1990) for the majority of constant stars. These historic data can be unambiguously used for processes that happen on scales of magnitudes, and need to be carefully examined in cases approaching the noise floor. The characterization of these limits in photometric stability may guide future studies in their use of plate archives. We explain these limitations for the example case of KIC 8462852, which has been claimed to dim by 0.16 magnitudes per century, and show that this trend cannot be considered as significant.

digitized magnitudes of photometric plates↗
NASA NTRS2017

Evolution of NASA's Earth Science Digital Object Identifier Registration System

NASA's Earth Science Data and Information System (ESDIS) Project has implemented a fully automated system for assigning Digital Object Identifiers (DOIs) to Earth Science data products being managed by its network of 12 distributed active archive centers (DAACs). A key factor in the successful evolution of the DOI registration system over last 7 years has been the incorporation of community input from three focus groups under the NASA's Earth Science Data System Working Group (ESDSWG). These groups were largely composed of DOI submitters and data curators from the 12 data centers serving the user communities of various science disciplines. The suggestions from these groups were formulated into recommendations for ESDIS consideration and implementation. The ESDIS DOI registration system has evolved to be fully functional with over 5,000 publicly accessible DOIs and over 200 DOIs being held in reserve status until the information required for registration is obtained. The goal is to assign DOIs to the entire 8000+ data collections under ESDIS management via its network of discipline-oriented data centers. DOIs make it easier for researchers to discover and use earth science data and they enable users to provide valid citations for the data they use in research. Also for the researcher wishing to reproduce the results presented in science publications, the DOI can be used to locate the exact data or data products being cited.

DOI; digital object identifier; mappin↗
NASA NTRS2016

Meso-Scale Digital Materials: Modular, Reconfigurable, Lattice-Based Structures

We present a modular, reconfigurable system for building large structures. This system uses discrete lattice elements, called digital materials, to reversibly assemble ultralight structures that are 99.7% air and yet maintain sufficient specific stiffness for a variety of structural applications and loading scenarios. Design, manufacturing, and characterization of modular building blocks are described, including struts, nodes, joints, and build strategies. Simple case studies are shown using the same building blocks in three different scenarios: a bridge, a boat, and a shelter. Field implementation and demonstration is supplemented by experimental data and numerical simulation. A simplified approach for analyzing these structures is presented which shows good agreement with experimental results.

Reconfigurable↗
NASA NTRS1995

Hardness Assurance and Testing Techniques for High Resolution (12- to 16-bit) Analog-to-Digital Converters

Discussed are hardness assurance and testing techniques to test and evaluate total dose radiation degradation of high resolution A/D converters. Because high-speed, high-resolution converters are critical parts in a digital signal processing or data acquisition system, the evaluation of performance in the early design phase is very important. Converters from three manufacturers are evaluated.

Analog-to-Digital↗
NASA NTRS2000

A Single-Chip Programmable Digital CMOS Imager with Enhanced Low Light Detection Capability

Low-power, low-cost, miniature and integrated digital imaging systems are expected to be widely used in consumer electronics in the near future. While CMOS technology has been responsible for the phenomenal growth in consumer electronics, micro-porcessors, memory, audio systems, and radio-frequency circuits (e.g. cellular phones), till recently, the video technology remained outside this mainstream.

digital↗
NASA NTRS1994

Approaches and Analysis for On-Focal-Plane Analog-to-Digital Conversion

This paper presents approaches for on-focal-plane analog-to-digital conversion (ADC). Common approaches and architectures for ADC and their utility for on-focal-plane integration are discussed. Candidate approaches are analyzed with respect to required amplifier gain, bandwidth, capacitance matching, noise and offsets as a function of ADC resolution. A column-parallel ADC architecture appears to be an effective compromise of chip area, power, circuit speed and ADC resolution. The discussion is valid for both infrared focal-plane arrays (FPAs) and visible image sensors.

analog-to-digital↗
NASA NTRS1996

Progress in Voltage and Current Mode On-Chip Analog-to-Digital converters for CMOS Image Sensors

Two 8 bit successive approximation analog-to-digital converter (ADC) designs and a 12 bit current mode incremental sigma delta ADC have been designed, fabricated, and tested. The successive approximation test chip designs are compatible with active pixel sensor (APS) column parallel architectures with a 20.4 ??itch in a 1.2 ??-well CMOS process and a 40 ??itch in a 2 ??-well CMOS process. The successive approximation designs consume as little as 49 ??t a 500 KHz conversion rate meeting the low power requirements inherent in column parallel architectures. The current mode incremental sigma-delta ADC test chips designed to be multiplied among 8 columns in a semi-column parallel current mode APS architecture. The higher accuracy ADC consumes 800 ??t a 5 KHz.

analog-to-digital↗
NASA NTRS2021

Lunar Surface Operations Modeling Using Digital Astronaut Simulation

During Apollo, crew members experienced a number of falls while engaging in extravehicular activity. The Digital Astronaut Simulation (DAS) expanded human biomechanics modeling tools to begin investigating this prospective mission safety and success challenge for the Artemis program. A core capability was developed to detect if a motion is dynamically feasible in a given gravitational environment. Fed by motion capture and mass properties data, this technology enables observation of whether tasks performed in 1G can be performed the same way in lunar gravity or if they require modifications.

Long Duration Health↗
NASA NTRSDate not supplied

Digital Flight: Enabling the Era of Scalable Mobility in the National Airspace System

In the 21st Century, new aviation markets, vehicle types, and technologies are fast emerging, inspiring new operational concepts for the National Airspace System such as Unmanned Aircraft Systems Traffic Management and Urban Air Mobility. These novel operations envision a dramatic increase in aerial mobility, or the ability to navigate freely through the airspace with unprecedented access and operational flexibility. Implementing these concepts presents a major challenge to the existing operational modes of Visual Flight Rules (VFR) and Instrument Flight Rules (IFR), developed under the limitations of early 20th Century technology and procedures to ensure safe navigation and separation from traffic. To meet this challenge and to support the needs of operators in the 21st Century and beyond, this paper proposes that VFR and IFR be augmented by new flight rules – Digital Flight Rules (DFR) – that leverage modern and emerging technologies and are not bound by restrictions borne of the state of technology 75-100 years ago. The objective of DFR is to provide safe and unfettered access to the airspace to all participating vehicle operators under all visibility conditions without incurring the limitations in operational flexibility inherent to IFR and even VFR. Advancements in communications, navigation, surveillance, aircraft connectivity, information access, automation technology, and supporting ground infrastructure provide the opportunity for the vehicle operator to engage at an unprecedented level in managing their flights regardless of flight visibility. Under DFR, these advancements enable the vehicle operator to assume full responsibility for traffic separation and therefore full trajectory management authority in all visibility conditions and airspace regions. The changes in roles and responsibilities are expected to enable greater airspace access and operational flexibility than afforded by IFR and VFR, thus enabling the emergence of new operations and a new era of advanced aerial mobility.

Mobility↗
NASA NTRSDate not supplied

Digital Information Platform (DIP) Overview

On March 24, 2021, NASA’s Digital Information Platform (DIP) released a Request for Information (RFI) to the aviation community. The RFI was intended to request two things: 1) DIP concept input such as current challenges and needs for data and services and 2) Interest in participating in collaborative demonstrations. On July 29, 2021, DIP team will meet with Airlines for America (A4A) to share a summary of information received from the RFI responses. The objective of the meeting is to follow up with respondents with takeaways the DIP team identified that will inform the concept and demonstration plans. The forum will give participants an opportunity to add on and provide feedback to the summary. The meeting will also describe the roadmap for the Collaborative Demonstrations and next steps for partner engagement.

Digital Information Platform (DIP) RFI summary↗
NASA NTRSDate not supplied

Digital Lunar Exploration Sites (DLES)

After an almost 50-year absence, NASA along with a group of international and commercial partners will return humans to the surface of the Moon as part of the Artemis program. As with the preceding Apollo program, modeling and simulation (M&S) will be an enabling technology for achieving the Artemis mission objectives. Fortunately, M&S has advanced considerably in the past half century, permitting much more detailed and encompassing integrated representations of the Artemis systems. One modeling area of critical importance to simulating the Artemis elements and mission activities is the accurate and efficient modeling of the operational lunar environment. This is particularly challenging since the Artemis program is considering exploration sites in the area of the Lunar South Pole (LSP), far away from any previous surface exploration sites. Fortunately, we now have considerably more and better data from recent lunar sensing missions. A planetary science team and a human exploration simulation team at NASA’s Johnson Space Center are developing a suite of products called the Digital Lunar Exploration Sites (DLES). DLES is intended to provide some of the necessary lunar environmental data products. This paper describes the fundamental need for DLES, the science data sets that are going into DLES, some of the processes used to integrate this data into DLES products, the basic products that constitute DLES, and some examples of DLES in use.

DLES↗
NASA NTRSDate not supplied

Digital Lunar Exploration Sites (DLES)

After an almost 50-year absence, NASA along with a group of international and commercial partners will return humans to the surface of the Moon as part of the Artemis program. As with the preceding Apollo program, modeling and simulation (M&S) will be an enabling technology for achieving the Artemis mission objectives. Fortunately, M&S has advanced considerably in the past half century, permitting much more detailed and encompassing integrated representations of the Artemis systems. One modeling area of critical importance to simulating the Artemis elements and mission activities is the accurate and efficient modeling of the operational lunar environment. This is particularly challenging since the Artemis program is considering exploration sites in the area of the Lunar South Pole (LSP), far away from any previous surface exploration sites. Fortunately, we now have considerably more and better data from recent lunar sensing missions. A planetary science team and a human exploration simulation team at NASA’s Johnson Space Center are developing a suite of products called the Digital Lunar Exploration Sites (DLES). DLES is intended to provide some of the necessary lunar environmental data products. This paper describes the fundamental need for DLES, the science data sets that are going into DLES, some of the processes used to integrate this data into DLES products, the basic products that constitute DLES, and some examples of DLES in use.

DLES↗
NASA NTRSDate not supplied

DIP: Digital Information Platform

The third DIP workshop’s topic is DIP for Flight Operators and Consumers. Participants will receive insight the consumer onboarding process and steps to take to consume from the platform. Showcase demos will be provided covering data integration services, data analytics using ML/AI technologies, and Collaborative Digital Decision Reroute (CDDR) capabilities. More details on service performance metrics will be discussed as well as updates on the technical development plan and schedule. Participants interested in consuming DIP services are highly encouraged to attend this workshop and provide feedback.

ATM-X↗