Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data control system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Numerical simulation of controlled flow tunnel for V/STOL testing

A 'smart' wind tunnel concept for V/STOL transition regime studies is presented and performance is projected with numerical simulations. The wind tunnel would provide a flow that faithfully represents free air flow and thereby permits accurate lift calculations for V/STOL aircraft. The design concept is based on free-air tunnels used for planar wings. Modifications are necessary to account for the highly deflected, vortical wake produced in low-speed take-off and landing situations. A three-step numerical procedure covering the potential flow of a high lift system in free-air, controlled flow data with a model in a wind tunnel and addition of the wall conditions to the simulation as a feedback loop to correct the closed-tunnel is described. The initial simulation is for three-dimensional full span jet flapped wings, and is derived from extended two-dimensional calculations. The results indicate that only partial control of the tunnel flow is sufficient to serve as a valid environment for V/STOl studies.

Joppa, R. G.↗
NASA NTRS1985

Integrated exhaust gas analysis system for aircraft turbine engine component testing

An integrated exhaust gas analysis system was designed and installed in the hot-section facility at the Lewis Research Center. The system is designed to operate either manually or automatically and also to be operated from a remote station. The system measures oxygen, water vapor, total hydrocarbons, carbon monoxide, carbon dioxide, and oxides of nitrogen. Two microprocessors control the system and the analyzers, collect data and process them into engineering units, and present the data to the facility computers and the system operator. Within the design of this system there are innovative concepts and procedures that are of general interest and application to other gas analysis tasks.

Summers, R. L.↗
NASA NTRS1985

Controlled Ecological Life Support System. Life Support Systems in Space Travel

Life support systems in space travel, in closed ecological systems were studied. Topics discussed include: (1) problems of life support and the fundamental concepts of bioregeneration; (2) technology associated with physical/chemical regenerative life support; (3) projection of the break even points for various life support techniques; (4) problems of controlling a bioregenerative life support system; (5) data on the operation of an experimental algal/mouse life support system; (6) industrial concepts of bioregenerative life support; and (7) Japanese concepts of bioregenerative life support and associated biological experiments to be conducted in the space station.

Macelroy, R. D.↗
NASA NTRS1983

Stiffness reductions during tensile fatigue testing of graphite/epoxy angle-ply laminates

The monitoring of modulus decay during fatigue testing as an indicator of damage accumulation and incipient failure has frequently been postulated. The present study was designed to generate tensile fatigue data under carefully controlled test conditions. A computerized data acquisition system was used to permit the measurement of dynamic modulus without interrupting the fatigue cycling. Two different 8-ply laminate configurations, viz, (+ or - 45)2s and (+ or - 67.5)2s, of a T300/5208 graphite/epoxy composite were tested. The (+ or 45)2s laminate did exhibit some modulus decay, although there was no well-defined correlation with applied stress level or number of cycles. The (+ or - 67.5)2s laminate did not exhibit any measurable modulus decay. Secondary effects observed included a slight recovery of the modulus decay after a test interruption, and a significant viscoelastic (creep) response of the (+ or - 45)2s laminate during fatigue testing.

Odom, E. M.↗
NASA NTRS1985

Cloud-drift wind estimates during PGGE

Cloud drift winds constitute an important component of the First Global Atmospheric Research Program Experiment data base. Data was generated by far different centers, using somewhat different procedures. Image data transformation to wind vectors is discussed. Emphasis is placed on the differences between the processing techniques employed in each system. The use of cloud drift data by global data assimulation systems is reviewed, including quality control and relative weighting.

Mcpherson, R. D.↗
NASA NTRS1985

Material sciences experiments under microgravity conditions with MAUS

Project MAUS is a part of the German material sciences program and provides autonomous payloads for the Space Shuttle. These payloads are housed in canisters which are identical with those of NASA's Get-Away-Special program. The main components of the hardware are: a standard system consisting of power supply, experiment control, data acquisition and the experiment modules containing experiment specific hardware. So far, three MAUS modules with experiments from the area of material sciences have been flown as GAS payloads.

G.H. Otto↗
NASA NTRS1985

An overview of the Space Station Technology/Advanced Development Program

The Advanced Technology Plan of the Fiscal Year (FY) 1986 is designed to focus on the most promising technology options applicable to the Space Station (SS), selected from the list of tasks identified by the FY 1984 Technology Program as the most critical technologies to be developed for the initial SS Initial Operating Capability. Most of the current activities are in the stages of manufacture and life tests of specific SS subsystems. Special attention is given to major technologies, which include power systems (PSs) (with emphasis on a Solar Dynamic PS concept); the thermal control system (with the focus on the 'thermal bus' concept); the environmental control and life support system; and the data management system; all are illustrated schematically. Other tasks, including dynamics, communications, extravehicular activities, mechanics, propulsion, and fluid, as well as the tasks of cost, maintainability, automation and robotics, and productivity are discussed.

Carlisle, R. F.↗
NASA NTRS1986

In-flight flow visualization of F-106B leading-edge vortex using the vapor-screen technique

A flight program was conducted with the objective to study the vortex flow systems existing around the F-106B aircraft. Level 1-G decelerating flight with varying angle of attack was considered along with conditions involving G levels in the range from 4.5 to 5.5 and angles of attack in the range from 16 to 19 degrees. It was demonstrated that the vapor screen technique can be applied successfully to flight vehicles under a variety of test conditions, taking into consideration the transonic maneuver performed by fighter aircraft. Details regarding the employed in-flight flow visualization technique are discussed, taking into account the seeding system, the light sheet system, the video system, the control system, and the recording of the data. Attention is also given to the flight program, the data development, and the scientific observations.

Lamar, J. E.↗
NASA NTRS1987

Integrated Analysis Capability Program

Integrated Analysis Capability (IAC) software system provides highly effective, interactive analysis tool for integrated design of large structures. Developed to serve as interface for programs from fields of structures, thermodynamics, controls, and system dynamics with executive system and data base to yield highly-efficient multidisciplinary system. Written in FORTRAN 77.

Frisch, Harold P.↗
NASA NTRS1987

Recent results from MAUS payloads

Project MAUS is a part of the German material sciences program and provides autonomous payloads for the Space Shuttle. These payloads are housed in canisters which are identical with those of NASA's Get-Away-Special program. The main components of the hardware are: a standard system consisting of power supply, experiment control, data acquisition and the experiment modules containing experiment specific hardware. Up to now, three MAUS modules with experiments from the area of material sciences have been flown as GAS payloads. Results will be reported from GAS Payload Number G-27 and G-28 flown aboard STS-51G.

Otto, G. H.↗
NASA NTRS1988

Automated cataloging and characterization of space-derived data

One of the most significant technical issues that NASA must address and resolve is the problem of managing the enormous amounts of scientific and engineering data that will be generated by the next generation of remote sensing systems such as the Hubble Space Telescope (HST) and the Earth Observing System (EOS). The amount of data these sensors are expected to produce will be orders of magnitude greater than NASA has ever experienced. Consequently new solutions must be developed for managing, accessing, and automatically inputting the data into a database in some expressive fashion that will provide a meaningful understanding and effective utilization of this data in a multidisciplinary environment. Presently, scientific data provided by satellites and other sources are processed, cataloged, and archived according to narrow mission or project-specific requirements with little regard to the semantics of the overall research. Scientists therefore lack knowledge of or access to potentially valuable data outside their own field. What is needed is an innovative approach that will allow collected data to be automatically cataloged, characterized, and managed in a domain-community. A concept and design approach that employs expert system-based knowledge controllers combined with advanced spatial database systems and graphical data structures is discussed.

Campbell, William J.↗
NASA NTRS1988

Voyager flight engineering preparations for Neptune encounter

Voyager 2 will make the first close observations of the planet Neptune, during the period from June 1 to October 1,1989. A number of flight engineering activities are being conducted in preparation for the encounter. This paper discusses the most significant of these activities: new image motion compensation techniques, attitude control system changes, new exposure capabilities, new data handling capabilities, radiation protection measures, and new navigation methods. In addition, the process of performing late sequence updates is discussed. An overview of the Neptune mission is also presented.

Miller, L. J.↗
NASA NTRS1988

Future MAUS payload and the TWIN-MAUS configuration

The German MAUS project (materials science autonomous experiments in weightlessness) was initiated in 1979 for optimum utilization of NASA's Get Away Special (GAS) program. The standard MAUS system was developed to meet GAS requirements and can accommodate a wide variety of GAS-type experiments. The system offers a range of services to experimenters within the framework of standardized interfaces. Four MAUS payloads being prepared for future space shuttle flight opportunities are described. The experiments include critical Marangoni convection, oscillatory Marangoni convection, pool boiling, and gas bubbles in glass melts. Scientific objectives as well as equipment hardware are presented together with recent improvements to the MAUS standard system, e.g., a new experiment control and data management unit and a semiconductor memory. A promising means of increasing resources in the field of GAS experiments is the interconnection of GAS containers. This important feature has been studied to meet the challenge of future advanced payloads. In the TWIN-MAUS configuration, electrical power and data will be transferred between two containers mounted adjacent to each other.

Staniek, S.↗
NASA NTRS1988

Automated cataloging and characterization of space-derived data

One of the most significant technical issues that NASA must address and resolve is the problem of managing the enormous amounts of scientific and engineering data that will be generated by the next generation of remote sensing systems such as the Hubble Space Telescope (HST) and the Earth Observing System (EOS). The amount of data these sensors are expected to produce will be orders of magnitude greater than NASA has ever experienced. Consequently, new solutions must be developed for managing, accessing, and automatically inputting the data into a database in some expressive fashion that will provide a meaningful understanding and effective utilization of this data in a multidisciplinary environment. Presently, scientific data provided by satellites and other sources are processed, cataloged, and archived according to narrow mission or project-specific requirements with little regard to the semantics of the overall research. Scientists therefore lack knowledge of or access to potentially valuable data outside their own field. What is needed is an innovative approach that will allow collected data to be automatically cataloged, characterized, and managed in a domain-community. A concept and design approach that employs expert system-based knowledge controllers combined with advanced spatial database systems and graphical data structures is discussed.

Campbell, William J.↗
NASA NTRS1988

U.S. Laboratory Module - Its capabilities and accommodations to support user payloads

The U.S. Laboratory Module of the Space Station is discussed, focusing on user accommodations. The configuration and subsystems capabilities of the module are described, including the power, thermal, environmental control, and data management subsystems, the vacuum system, process materials management, and laboratory support equipment. The experimental facilities included in the laboratory are listed. The experiment operations planned for the laboratory are examined and compared with the experimental activities in other manned space laboratories.

Powell, Luther E.↗
NASA NTRS1989

A logical model of cooperating rule-based systems

A model is developed to assist in the planning, specification, development, and verification of space information systems involving distributed rule-based systems. The model is based on an analysis of possible uses of rule-based systems in control centers. This analysis is summarized as a data-flow model for a hypothetical intelligent control center. From this data-flow model, the logical model of cooperating rule-based systems is extracted. This model consists of four layers of increasing capability: (1) communicating agents, (2) belief-sharing knowledge sources, (3) goal-sharing interest areas, and (4) task-sharing job roles.

Bailin, Sidney C.↗
NASA NTRS1991

Performance capabilities of a JPL dual-arm advanced teleoperation system

The system comprises: (1) two PUMA 560 robot arms, each equipped with the latest JPL developed smart hands which contain 3-D force/moment and grasp force sensors; (2) two general purpose force reflecting hand controllers; (3) a NS32016 microprocessors based distributed computing system together with JPL developed universal motor controllers; (4) graphics display of sensor data; (5) capabilities for time delay experiments; and (6) automatic data recording capabilities. Several different types of control modes are implemented on this system using different feedback control techniques. Some of the control modes and the related feedback control techniques are described, and the achievable control performance for tracking position and force trajectories are reported. The interaction between position and force trajectory tracking is illustrated. The best performance is obtained by using a novel, task space error feedback technique.

Szakaly, Z. F.↗
NASA NTRS1991

Magnetic suspension systems for space applications

An overview of techniques is presented used in the described magnetic suspension systems. Also a review is presented of the systems already developed, which demonstrate the usefulness, applicability, and flight readiness of magnetic suspension to a broad range of payloads and environments. The following subject areas are covered: programs overview; key concepts; magnetic suspension as an isolator and as a pointer; pointing and isolation systems; magnetic actuator control techniques; and test data.

Havenhill, Douglas G.↗