Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIPOLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Liquid structure of dibutyl sulfoxide

We present experimental (x-ray diffraction) data on the structure of liquid dibutyl sulfoxide at 320 K and rationalize them by means of Molecular Dynamics simulations. Not unexpectedly, DBSO bearing a strong dipolar moiety and two medium length, apolar, butyl chains, this compound turns out to be characterised by a distinct degree of polar-vs-apolar structural differentiation at the nm spatial scale that is fingerprinted in a low Q peak in its x-ray diffraction pattern. Similarly to, but to a larger extent than its shorter chain family members (such as DMSO), DBSO is also characterised by an enhanced dipole-dipole correlation that is responsible for the moderate Kirkwood correlation factor as well as for the self-association detected in this compound. In conclusion, we show however that the supposedly relevant hydrogen bonding correlations between oxygen and butyl chain hydrogens are of limited extent and only in the case of α-hydrogens appreciable indication of the existence of such an interaction is found, but it turns out to be a mere consequence of the strong dipole-dipole correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Can Kohn–Sham density functional theory predict accurate charge distributions for both single-reference and multi-reference molecules?

Dipole moments are the first moment of electron density and are fundamental quantities that are often available from experiments. An exchange–correlation functional that leads to an accurate representation of the charge distribution of a molecule should accurately predict the dipole moments of the molecule. It is well known that Kohn–Sham density functional theory (DFT) is more accurate for the energetics of single-reference systems than for the energetics of multi-reference ones, but there has been less study of charge distributions. Here, in this work, we benchmark 48 density functionals chosen with various combinations of ingredients, against accurate experimental data for dipole moments of 78 molecules, in particular 55 single-reference molecules and 23 multi-reference ones. We chose both organic and inorganic molecules, and within the category of inorganic molecules there are both main-group and transition-metal-containing molecules, with some of them being multi-reference. As one would expect, the multi-reference molecules are not as well described by single-reference DFT, and the functionals tested in this work do show larger mean unsigned errors (MUEs) for the 23 multi-reference molecules than the single-reference ones. Five of the 78 molecules have relatively large experimental error bars and were therefore not included in calculating the overall MUEs. For the 73 molecules not excluded, we find that three of the hybrid functionals, B97-1, PBE0, and TPSSh (each with less than or equal to 25% Hartree–Fock (HF) exchange), the range-separated hybrid functional, HSE06 (with HF exchange decreasing from 25% to 0 as interelectronic distance increases), and the hybrid functional, PW6B95 (with 28% HF exchange) are the best performing functionals with each yielding an MUE of 0.18 D. Perhaps the most significant finding of this study is that there exists great similarity among the success rate of various functionals in predicting dipole moments. In particular, of 39 functionals designed as general-purpose functionals and that do not have a global value of 100% HF exchange, the average MUE is 0.23 D, with a standard deviation of only 0.04 D. Among gradient approximations, which are especially interesting because of their speed and portability, the best overall performance is by PBE, HCTH/407, OLYP, OreLYP, and GAM, each with MUE of 0.22 D.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Non-linear and non-local behaviour in spontaneously electrical solids

Using reflection–absorption infrared spectroscopy (RAIRS), we show that solids displaying spontaneous dipole orientation possess quite general non-local and non-linear characteristics, exemplified through their internal electric fields. The most graphic illustration of this, uncovered originally through electron beam studies, may be found in films of cis-methyl formate (cis-MF), for which data demonstrated the counter-intuitive property that the degree of dipole order in the film does not monotonically decrease as the temperature of deposition rises, but rather increases sharply above ~77 K. Here we show how RAIRS provides independent evidence to support this conclusion. These new data confirm (i) that the behaviour of spontelectrics is governed by an expression for the degree of dipole orientation, which is continuous in temperature, but with a discontinuity in the derivative, and (ii) that the temperature of deposition associated with this discontinuity matches the temperature above which dipole order switches from the expected reduction with temperature to an increase with temperature.

Roman, M.↗
DOE OSTI2023

An extensive assessment of the performance of pairwise and many-body interaction potentials in reproducing ab initio benchmark binding energies for water clusters n = 2–25

We assess the performance of 7 pairwise additive (TIP3P, TIP4P, TIP4P-ice, TIP5P, OPC, SPC, SPC/E) and 8 families of many-body potentials (q-AQUA, HIPPO, AMOEBA, EFP, TTM, WHBB, MB-pol, MB-UCB) in reproducing high-level ab initio benchmark values, CCSD(T) or MP2 at the complete basis set (CBS) limit for the binding energy and the many-body expansion (MBE) of water clusters n = 2–11, 16–17, 20, 25. By including a large range of cluster sizes having dissimilar hydrogen bonding networks, we obtain an understanding of how these potentials perform for different hydrogen bonding arrangements that are mostly outside of their parameterization range. While it is appropriate to compare the results of ab initio based many-body potentials directly to the electronic binding energies (D e 's), the pairwise additive ones are compared to the enthalpies at T = 298 K, ΔH(298 K), as the latter class of force fields are parametrized to reproduce enthalpies (implicitly accounting for zero-point energy corrections) rather than binding energies. We find that all pairwise additive potentials considered overestimate the reference ΔH values for the n = 2–25 clusters by >13%. For the water dimer (n = 2) in particular, the errors are in the range 83–119% for the pairwise additive potentials studied since these are based on an effective rather than the true 2-body interaction specifically designed as a means of partially accounting for the missing many-body terms. This stronger 2-body interaction is achieved by an enhanced monomer dipole moment that mimics its increase from the gas phase monomer to the condensed phase value. Indeed, for cluster sizes n ≥ 4 the percent deviations become slightly smaller (albeit all exceeding 13%). In contrast, we find that the many-body potentials perform more accurately in reproducing the electronic binding energies (D e 's) throughout the entire cluster range (n = 2–25), all reproducing the ab initio benchmark binding energies within ±7% of the respective CBS values. We further assess the ability of a subset of the many-body potentials (MB-UCB, q-AQUA, MB-pol, and TTM2.1-F) to also reproduce the magnitude of the ab initio many-body energy terms for water cluster sizes n = 7, 10, 16 and 17. The potentials show an overall good agreement with the available benchmark values. However, we identify characteristic differences upon comparing the many-body terms at both the ab initio-optimized geometries and the respective potential-optimized geometries to the reference ab initio values. Additionally, by applying this analysis to a wide range of cluster sizes, trends in the MBE of the potentials with increasing cluster size can be identified. Finally, in an attempt to draw a parallel between the pairwise additive and many-body potentials, we report the analysis of the individual molecular dipole moments for water clusters with 1 to ~4 solvation shells with the TTM2.1-F potential. We find that the internally solvated water molecules have in general a larger molecular dipole moment ranging from 2.6–3.0 D. This justifies the use of an enhanced, with respect to the gas-phase value, molecular dipole moment for the pairwise additive potentials, which is intended to fold in the many body terms into an effective (enhanced) pairwise interaction through the choice of the charges. These results have important implications for the development of future generations of efficient, transferable, and highly accurate classical interaction potentials in both the pairwise additive and many-body categories.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cooperative effect of local active stresses on the macroscopic contractility of elastic fiber networks

The collective action of actively contractile units embedded in elastic biopolymer networks plays a crucial role in regulating the network's macroscopic mechanical response. Here, in this study, we investigate how the macroscopic boundary stress in model elastic fiber networks depends on the number and nature of embedded contractile units, each exerting an isotropic force dipole, as well as on the bending stiffness of fibers. We find that the macroscopic stress increases nonlinearly with the number of dipoles due to mutual stiffening of initially soft, bending-dominated networks. Using effective medium theory, we relate this enhanced contractility to an increase in the effective average network coordination number due to constraints imposed by the force dipoles. By comparing three distinct force dipole models that differ in their local structures, we demonstrate that the specific manner in which an active unit constrains the network strongly influences the onset and nature of the stiffening transition. Our results highlight that not only the quantity but also the local geometry of force-generating units critically determines the macroscopic mechanical behavior. This framework provides a physical basis for understanding how biological systems—such as molecular motors in the cytoskeleton, or adherent cells in the extracellular matrix—can modulate network-scale nonlinear elastic properties through local tuning of active force-generating units.

Biological and medical sciences↗
DOE OSTI2016

Planck 2015 results: V. LFI calibration

In this paper, we present a description of the pipeline used to calibrate the Planck Low Frequency Instrument (LFI) timelines into thermodynamic temperatures for the Planck 2015 data release, covering four years of uninterrupted operations. As in the 2013 data release, our calibrator is provided by the spin-synchronous modulation of the cosmic microwave background dipole, but we now use the orbital component, rather than adopting the Wilkinson Microwave Anisotropy Probe (WMAP) solar dipole. This allows our 2015 LFI analysis to provide an independent Solar dipole estimate, which is in excellent agreement with that of HFI and within 1σ (0.3% in amplitude) of the WMAP value. This 0.3% shift in the peak-to-peak dipole temperature from WMAP and a general overhaul of the iterative calibration code increases the overall level of the LFI maps by 0.45% (30 GHz), 0.64% (44 GHz), and 0.82% (70 GHz) in temperature with respect to the 2013 Planck data release, thus reducing the discrepancy with the power spectrum measured by WMAP. We estimate that the LFI calibration uncertainty is now at the level of 0.20% for the 70 GHz map, 0.26% for the 44 GHz map, and 0.35% for the 30 GHz map. Finally, we provide a detailed description of the impact of all the changes implemented in the calibration since the previous data release.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

BeyondPlanck: VII. Bayesian estimation of gain and absolute calibration for cosmic microwave background experiments

We present a Bayesian calibration algorithm for cosmic microwave background (CMB) observations as implemented within the global end-to-end BEYONDPLANCK framework and applied to the Planck Low Frequency Instrument (LFI) data. Following the most recent Planck analysis, we decomposed the full time-dependent gain into a sum of three nearly orthogonal components: one absolute calibration term, common to all detectors, one time-independent term that can vary between detectors, and one time-dependent component that was allowed to vary between one-hour pointing periods. Each term was then sampled conditionally on all other parameters in the global signal model through Gibbs sampling. The absolute calibration is sampled using only the orbital dipole as a reference source, while the two relative gain components were sampled using the full sky signal, including the orbital and Solar CMB dipoles, CMB fluctuations, and foreground contributions. We discuss various aspects of the data that influence gain estimation, including the dipole-polarization quadrupole degeneracy and processing masks. Comparing our solution to previous pipelines, we find good agreement in general, with relative deviations of -0.67% (-0.84%) for 30 GHz, 0.12% (-0.04%) for 44 GHz and -0.03% (-0.64%) for 70 GHz, compared to Planck PR4 and Planck 2018, respectively. We note that the BEYONDPLANCK calibration was performed globally, which results in better inter-frequency consistency than previous estimates. Additionally, WMAP observations were used actively in the BEYONDPLANCK analysis, which both breaks internal degeneracies in the Planck data set and results in an overall better agreement with WMAP. Finally, we used a Wiener filtering approach to smoothing the gain estimates. We show that this method avoids artifacts in the correlated noise maps as a result of oversmoothing the gain solution, which is difficult to avoid with methods like boxcar smoothing, as Wiener filtering by construction maintains a balance between data fidelity and prior knowledge. Although our presentation and algorithm are currently oriented toward LFI processing, the general procedure is fully generalizable to other experiments, as long as the Solar dipole signal is available to be used for calibration.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Nuclear structure studies with gamma-ray beams

In stable and weakly bound neutron-rich nuclei, a resonance-like concentration of dipole states has been observed for excitation energies below the neutron-separation energy. This clustering of strong dipole states has been named the Pygmy Dipole Resonance (PDR) in contrast to the Giant Dipole Resonance (GDR) that dominates the E1 response. Understanding the PDR is presently of great interest in nuclear structure and nuclear astrophysics. High-sensitivity studies of E1 and M1 transitions in closed-shell nuclei using monoenergetic and 100% linearly-polarized photon beams are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Si clusters are more metallic than bulk Si

Dipole polarizabilities were computed using density functional theory for silicon clusters over a broad range of sizes up to N = 147 atoms. The calculated total effective polarizabilities, which include contributions from permanent dipole moments of the clusters, are in very good agreement with recently measured values. We show that the permanent dipole contributions are most important for clusters in the intermediate size range and that the measured polarizabilities can be used to distinguish between energetically nearly degenerate cluster isomers at these sizes. We decompose the computed total polarizabilities into the so-called dipole and charge transfer contributions, $α^p$ and $α^q$, using a sitespecific analysis. When the per-atom values of these quantities are plotted against $N^{-1/3}$, clear linear trends emerge that can be extrapolated to the large size limit ($N^{-1/3}$ → 0), resulting in a value for $\frac{α}{N}$ of 30.5 bohrs 3 /atom that is significantly larger than the per-atom polarizability of semiconducting bulk Si, 25.04 bohrs 3 /atom. This indicates that Si clusters possess a higher degree of metallicity than bulk Si, a conclusion that is consistent with the strong electrostatic screening of the cluster interiors made evident by the analysis of the calculated atomic polarizabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Theory and modeling of molecular modes in the NMR relaxation of fluids

Traditional theories of the nuclear magnetic resonance (NMR) autocorrelation function for intra-molecular dipole pairs assume a single-exponential decay, yet the calculated autocorrelation of realistic systems displays a rich, multi-exponential behavior, resulting in anomalous NMR relaxation dispersion (i.e., frequency dependence). We develop an approach to model and interpret the multi-exponential intra-molecular autocorrelation using simple, physical models within a rigorous statistical mechanical development that encompasses both rotational diffusion and translational diffusion in the same framework. Here, we recast the problem of evaluating the autocorrelation in terms of averaging over a diffusion propagator whose evolution is described by a Fokker–Planck equation. The time-independent part admits an eigenfunction expansion, allowing us to write the propagator as a sum over modes. Each mode has a spatial part that depends on the specified eigenfunction and a temporal part that depends on the corresponding eigenvalue (i.e., correlation time) with a simple, exponential decay. The spatial part is a probability distribution of the dipole pair, analogous to the stationary states of a quantum harmonic oscillator. Drawing inspiration from the idea of inherent structures in liquids, we interpret each of the spatial contributions as a specific molecular mode. These modes can be used to model and predict the NMR dipole–dipole relaxation dispersion of fluids by incorporating phenomena on the molecular level. We validate our statistical mechanical description of the distribution in molecular modes with molecular dynamics simulations interpreted without any relaxation models or adjustable parameters: the most important poles in the Padé–Laplace transform of the simulated autocorrelation agree with the eigenvalues predicted by the theory

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Designing artificial two-dimensional landscapes via atomic-layer substitution

Significance Manipulating materials with atomic-scale precision is essential for the development of a next-generation material design toolbox. Tremendous efforts have been made to advance the compositional, structural, and spatial accuracy of material deposition and patterning. Here, we presented a new reaction pathway to implement the conversions of two-dimensional materials within the atomic-layer thickness at room temperature for electrical dipole manipulation. Not only could various Janus monolayer transition metal dichalcogenides with vertical dipole be realized, but also some heterostructures, including the dipole-nondipole heterostructures (MoS 2 -MoSSe) and multiheterostructures (MoS 2 -MoSSe-MoSeS-MoSe 2 ) within the same monolayer host structure are developed, in which the dipoles can be selectively patterned to be zero (MoS 2 , MoSe 2 ), positive (MoSSe), and negative (MoSeS).

Guo, Yunfan↗
DOE OSTI2012

MAGNETICALLY CONTROLLED ACCRETION FLOWS ONTO YOUNG STELLAR OBJECTS

Accretion from disks onto young stars is thought to follow magnetic field lines from the inner disk edge to the stellar surface. The accretion flow thus depends on the geometry of the magnetic field. This paper extends previous work by constructing a collection of orthogonal coordinate systems, including the corresponding differential operators, where one coordinate traces the magnetic field lines. This formalism allows for an (essentially) analytic description of the geometry and the conditions required for the flow to pass through sonic points. Using this approach, we revisit the problem of magnetically controlled accretion flow in a dipole geometry, and then generalize the treatment to consider magnetic fields with multiple components, including dipole, octupole, and split monopole contributions. This approach can be generalized further to consider more complex magnetic field configurations. Observations indicate that accreting young stars have substantial dipole and octupole components, and that accretion flow is transonic. If the effective equation of state for the fluid is too stiff, however, the flow cannot pass smoothly through the sonic points in steady state. For a multipole field of order l, we derive a general constraint on the polytropic index, n > l + 3/2, required for steady transonic flow to reach free-fall velocities. For octupole fields, inferred on surfaces of T Tauri stars, the index n > 9/2, so that the flow must be close to isothermal. The inclusion of octupole field components produces higher densities at the stellar surface and smaller areas for the hot spots, which occur at higher latitudes; the magnetic truncation radius is smaller (larger) for octupole components that are aligned (anti-aligned) with the stellar dipole. This contribution thus increases our understanding of magnetically controlled accretion for young stellar objects and can be applied to a variety of additional astrophysical problems.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Pygmy resonances: what’s in a name?

The centroid, width and percentage of energy weighted sum rule of dipole resonances can be strongly affected by dynamical fluctuations and static deformations of the nuclear surface, deformations and fluctuations which, in turn, depend on pairing, and thus on Cooper pairs. Because of angular momentum conservation, such insight is restricted, to lowest order, to fluctuations/deformations of quadrupole and monopole type. The latter being closely connected with the neutron (excess) skin and thus with soft dipole modes. From the values ( N - Z)/ A ≈ 0.18, 0.21, and 0.45 for the nuclei 122 Sn, 208 Pb, and 11 Li, it is expected that the latter system, which is weakly bound by pairing effects (spatially extended single Cooper pair and odd proton acting as spectator), constitutes an attractive laboratory to study the properties of soft E 1-modes and thus of isospin nuclear deformation. From the calculation of the full dipole response function in QRPA, discretizing the continuum in a spherical box of radius of 40 fm, one finds a GDR with centroid E x ≈ 24 MeV, width Γ ≈11 MeV and carrying 90% of the EWSR, and a low-lying collective resonance characterized by E X = 0.75 MeV, Γ = 0.5 MeV and 6.2% EWSR. The wave function of the latter resonance is built out of about fifteen components (both protons and neutrons), typical of a collective mode. The transition densities indicate this soft E 1 - mode to be generated by surface density oscillation of the neutron (halo) skin (Δ r np ≈ 1.71 fm) relative to an approximately isospin-saturated core. Through a detailed study of the full dipole response of 11 Li we will draw a comparison between the soft E 1 - mode of this halo nucleus and the PDR of heavy stable nuclei, pointing to the physical similarities and also to the basic differences.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Effect of higher-order multipole moments on the Stark line shape

Spectral line shapes are sensitive to plasma conditions and are often used to diagnose electron density of laboratory plasmas as well as astrophysical plasmas. Stark line-shape models take into account the perturbation of the radiator’s energy structure due to the Coulomb interaction with the surrounding charged particles. Solving this Coulomb interaction is challenging and is commonly approximated via a multipole expansion. Yet, most models include only up to the second term of the expansion (the dipole term). While there have been studies on the higher-order terms due to one of the species (i.e. either ions or electrons), there is no model that includes the terms beyond dipole from both species. Here, we investigate the importance of the higher-order multipole terms from both species on the Hβ line shape. First, we find that it is important to include higher order terms consistently from both ions and electrons to reproduce measured line-shape asymmetry. Next, we study the line shape convergence with the higher-order terms at 1017, 1018, and 1019 e/cc. We discover that the line shape calculated with the dipole-only approximation becomes inaccurate as density increases. It is necessary to include only up to the third (quadrupole) term to compute the line-shape accurately within 2%. Since most existing models include only the dipole terms, the densities inferred with such models are in question. Finally, we investigate the impact of neglecting the quadrupole terms on density diagnostics. We find that the model without the quadrupole term slightly underestimates the density, and the discrepancy becomes as large as 12% at high densities. Although the case of study is limited to Hβ , we expect similar impact on other lines.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Trapping interlayer excitons in van der Waals heterostructures by potential arrays

Transition metal dichalcogenide heterostructures can host interlayer excitons (IXs), which consist of electrons and holes spatially separated in different layers. IXs possess permanent dipoles and have proven to offer a wealth of novel physics. Here we develop a discrete, random-walk model which includes annihilation and repulsion interactions among IXs. Using this model, we simulate the trapping of IXs in traps of different depths, densities, and shapes. Our results show that dipole-dipole interactions play an important role in regulating IX trapping. The effects of dipole interactions can be mitigated with small, deep traps which are realizable with atomic defects and moire potentials.

2-dimensional systems↗
DOE OSTI2023

Fracton superfluid hydrodynamics

We examine the hydrodynamics of systems with spontaneously broken multipolar symmetries using a systematic effective field theory. We focus on the simplest nontrivial setting: a system with charge and dipole symmetry, but without momentum conservation. When no symmetries are broken, our formalism reproduces the quartic subdiffusion (ω ~ –ik 4 ) characteristic of “fracton hydrodynamics” with conserved dipole moment. Our formalism also captures spontaneous breaking of charge and/or dipole symmetry. When charge symmetry is spontaneously broken, the hydrodynamic modes are quadratically propagating and quartically relaxing (ω ~ ±k 2 – ik 4 ). When the dipole symmetry is spontaneously broken but the charge symmetry is preserved, then we find quadratically relaxing (diffusive) transverse modes, plus another mode which, depending on parameters, may be either purely diffusive (ω ~ – ik 2 ) or quadratically propagating and quadratically relaxing (ω ~ ± k 2 – ik 2 ). Furthermore, our work provides concrete predictions that may be tested in near-term cold atom experiments, and also lays out a general framework that may be applied to study systems with spontaneously broken multipolar symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Origin of the crossover between a freezing and a structural transition at low concentration in the relaxor ferroelectric K 1-x Li x TaO 3

The origin of the relaxor behavior in K 1-x Li x TaO 3 (KLT) and other disordered perovskites is now recognized to be due to the reorientation of the polar nanodomains formed by the correlated dipoles of off-center ions. The collective dynamics of these systems evolve through several temperature stages. On decreasing temperature below the so-called Burns temperature T B , individual dipoles become correlated within nanosized regions. On further cooling, the slow dynamics of these polar regions allows local lattice distortions to take place and the formation of polar nanodomains at T* < T B . At still lower temperature, some relaxors undergo a phase transition while others do not. In KLT, there is a critical Li concentration x c = 0.022 above which the system undergoes a structural transition at T c , and below which it freezes in a dipole glass state at T f . To better understand the nature of this critical concentration, the changes that occur upon crossing it and the nature of the dipole glass state, the collective dynamics of KLT have been studied by dielectric spectroscopy and neutron diffraction for two Li concentrations (x = 0.026 and 0.018), close to but straddling the critical concentration x c . Two very different transitional behaviors are observed. Just below this critical concentration, KLT displays critical slowing down and the onset of freezing as seen in hydrogen-bonded molecular ferroelectrics, while just above this concentration, KLT undergoes a first-order structural transition.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Interaction-induced long-time tail of a nonlinear ac absorption in a localized system: A relay-race mechanism

In conventional solid-state electron systems with localized states the ac absorption is linear since the inelastic widths of the energy levels exceed the drive amplitude. The situation is different in the systems of cold atoms in which phonons are absent. Then even a weak drive leads to saturation of the ac absorption within resonant pairs, so that the population of levels oscillates with the Rabi frequency. We demonstrate that, in the presence of weak dipole-dipole interactions, the response of the system acquires a long-time component which oscillates with frequency much smaller than the Rabi frequency. The underlying mechanism of this long-time behavior is that the fields created in the course of the Rabi oscillations serve as resonant drive for the second-generation Rabi oscillations in pairs with level spacings close to the Rabi frequency. Here, the frequency of the second-generation oscillations is of the order of interaction strength. As these oscillations develop, they can initiate the next-generation Rabi oscillations, and so on. Formation of the second-generation oscillations is facilitated by the nondiagonal component of the dipole-dipole interaction tensor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗