SEARCH · Engineering Papers

Results for “Conditional Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Interferometric investigations of compressible dynamic stall over a transiently pitching airfoil

The dynamic stall flow field over NACA 0012 airfoil pitching transiently from 0 - 60 at a constant rate under compressible flow conditions has been studied using the real-time technique of point diffraction interferometry. This investigation using nonintrusive diagnostics provides a quantitative description of the overall flow field, including the finer details of dynamic stall vortex formation, growth and the concomitant changes in the pressure distribution. Analysis of several hundred interferograms obtained for a range of flow conditions shows that the peak leading edge suction pressure coefficient that stall is nearly constant for a given free stream Mach number at all nondimensional pitch rates. Also, this value is below that seen in steady flow at static stall for the same Mach number, indicating that dynamic effects significantly effect the separation behavior. Further, for a given Mach number, the dynamic stall vortex seems to form rapidly at nearly the same angle of attack for all pitch rates studied. As the vortex is shed, it induces an anti-clockwise trailing edge vortex, which grows in a manner similar to that of a starting vortex. The measured peak suction pressure coefficient drops as the free stream Mach number increases. For free stream Mach numbers above 0.4, small multiple shocks appear near the leading edge.

Chandrasekhara, M. S.↗

NASA NTRS2004

Advanced Electrical Materials and Components Being Developed

All aerospace systems require power management and distribution (PMAD) between the energy and power source and the loads. The PMAD subsystem can be broadly described as the conditioning and control of unregulated power from the energy source and its transmission to a power bus for distribution to the intended loads. All power and control circuits for PMAD require electrical components for switching, energy storage, voltage-to-current transformation, filtering, regulation, protection, and isolation. Advanced electrical materials and component development technology is a key technology to increasing the power density, efficiency, reliability, and operating temperature of the PMAD. The primary means to develop advanced electrical components is to develop new and/or significantly improved electronic materials for capacitors, magnetic components, and semiconductor switches and diodes. The next important step is to develop the processing techniques to fabricate electrical and electronic components that exceed the specifications of presently available state-of-the-art components. The NASA Glenn Research Center's advanced electrical materials and component development technology task is focused on the following three areas: 1) New and/or improved dielectric materials for the development of power capacitors with increased capacitance volumetric efficiency, energy density, and operating temperature; 2) New and/or improved high-frequency, high-temperature soft magnetic materials for the development of transformers and inductors with increased power density, energy density, electrical efficiency, and operating temperature; 3) Packaged high-temperature, high-power density, high-voltage, and low-loss SiC diodes and switches.

Schwarze, Gene E.↗

NASA NTRS1994

Observations of Laminar Surface Shear Stress Patterns on the Sidewall of a Rectangular, Mach 3 Quiet Tunnel Using Liquid Crystal Coatings

A shear-stress--sensitive liquid crystal coating (LCC) was used to visualize the surface shear stress distribution on the flat sidewall of the MSU quiet supersonic tunnel as a function of flow stagnation pressure. Under conditions of quiet operation, the LCC color-change response indicated the existence of a nonuniform surface shear stress distribution. This shear pattern was characterized by an elongated, down st ream-point ing triangular region of relatively low shear, with its apex on and its axis coincident with, the sidewall centerline. This low-shear zone was bounded symmetrically by two regions of relatively higher shear; these high-shear zones originated within the concave-curvature portion of the nozzle, in the corners between the flat sidewall and the contoured upper and lower nozzle surfaces. A 3-D Navier-Stokes code was used to compute the pressure and surface shear distributions on the sidewall. Flow-expansion-induced transverse pressure gradients on the nozzle sidewall generated symmetric inflows from the corners towards the sidewall centerline; these inflows caused a thickening of the sidewall boundary layer along the centerline, resulting in lower shear stresses consistent with the liquid crystal results. Peripherally nonuniform laminar boundary layer development, and the associated stability of such complex 3-D flows, must be considered in quiet-tunnel applications using rectangular nozzles. A color video will be shown.

Reda, D.↗

DOE OSTI2025

Uniform secondary current distribution at disk electrodes under Tafel kinetics enabled by concentric current-shielding rings

Non-uniform secondary current distribution at rotating disk electrodes (RDE) is a common problem when using resistive electrolyte media or large applied currents. In a recent publication, we have shown that auxiliary electrodes such as the ring of a rotating ring disk electrode (RRDE) can help suppress current non-uniformities at the disk enabling reliable electroanalytical measurements. However, this previous work considered linear kinetics where current distribution non-uniformities were moderate. In the present contribution, we consider current distribution non-uniformities encountered under Tafel kinetics. We show, for the case of 2,5-dihydroxy-1,4-benzoquinone (DHBQ) reduction, that optimally chosen ring conditions serve to provide effective shielding at the disk edge rendering the overall disk current distribution to be uniform. Numerical modeling and scaling analysis (using the Wagner number) are presented to aid a user in determining the optimal ring current density for achieving uniform disk current distribution under Tafel kinetics. This approach is especially useful when studying soluble-soluble redox transitions for which, unlike deposit distribution in electrodeposition, the current distribution non-uniformity is not visually apparent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

The Stochastic Gause Predator-Prey model: Noise-induced extinctions and invariance

We consider the Gause predator-prey with general bounded or sub‑linear functional responses, – which includes those of Holling types Ⅰ–Ⅳ. – and multiplicative Gaussian noise. In contrast to previous studies, the prey in our model follows logistic dynamics while the predator's population is solely regulated by consumption of the prey. To ensure well-posedeness, we derive explicit Lyapunov‐type criteria ensuring global positivity and moment boundedness of solutions. We find conditions for noise‑induced extinctions, proving that stochasticity can drive either population to collapse even when the deterministic analogue predicts stable coexistence. In the case when the predator becomes extinct, we establish a limiting distribution for the predator's population. Last, for functional responses of Holling type Ⅰ, we provide sufficient conditions on the intensity of the noise for the existence and uniqueness of a stationary distribution.

Gause model↗

NASA NTRS2000

The fluid dynamic and shear environment in the NASA/JSC rotating-wall perfused-vessel bioreactor

The rotating-wall perfused-vessel (RWPV) bioreactor, used for both microgravity and Earth-based cell science experiments, is characterized in terms of the fluid dynamic and fluid shear stress environment. A numerical model of the flow field is developed and verified with laser Doppler velocimeter measurements. The effects of changes in operating conditions, including rotation rates and fluid perfusion rates, are investigated with the numerical model. The operating conditions typically used for ground-based experiments (equal rotation of the inner and outer cylinders) leads to flow patterns with relatively poor mass distribution characteristics. Approximately 50% of the inlet-perfused fluid bypasses the bulk of the fluid volume and flows to the perfusion exit. For operating conditions typical in microgravity, small differential rotation rates between the inner and outer cylinders lead to greatly improved flow distribution patterns and very low fluid shear stress levels over a large percentage of the fluid volume. Differences in flow patterns for the different operating conditions are explored. Large differences in the hydrodynamic environments for operating conditions typical of true microgravity and ground-based "microgravity simulations" are demonstrated.

Bioreactors↗

NASA NTRS1998

Three-Dimensional Measurements of Fuel Distribution in High-Pressure, High- Temperature, Next-Generation Aviation Gas Turbine Combustors

In our world-class, optically accessible combustion facility at the NASA Lewis Research Center, we have developed the unique capability of making three-dimensional fuel distribution measurements of aviation gas turbine fuel injectors at actual operating conditions. These measurements are made in situ at the actual operating temperatures and pressures using the JP-grade fuels of candidate next-generation advanced aircraft engines for the High Speed Research (HSR) and Advanced Subsonics Technology (AST) programs. The inlet temperature and pressure ranges used thus far are 300 to 1100 F and 80 to 250 psia. With these data, we can obtain the injector spray angles, the fuel mass distributions of liquid and vapor, the degree of fuel vaporization, and the degree to which fuel has been consumed. The data have been used to diagnose the performance of injectors designed both in-house and by major U.S. engine manufacturers and to design new fuel injectors with overall engine performance goals of increased efficiency and reduced environmental impact. Mie scattering is used to visualize the liquid fuel, and laser-induced fluorescence is used to visualize both liquid and fuel vapor.

Hicks, Yolanda R.↗

DOE OSTI2022

Effect of heavy ion irradiation dose rate and temperature on α' precipitation in high purity Fe-18%Cr alloy

Cr-rich alpha prime precipitates (CrRP) induce hardening and embrittlement of FeCr alloys, but the kinetics of CrRP formation due to particle irradiation are not well understood. In this study, Fe18wt.%Cr alloy in solid solution state and pre-aged to produce relatively coarse CrRP was irradiated with 8 MeV Fe ions. The irradiation conditions involved two midrange doses of 0.37 and 3.7 displacements per atom (dpa), a wide range of dose rates (10 -5 –10 -3 dpa/s) and temperatures (300–450 °C). The distributions of CrRP after irradiation were studied with atom probe tomography (APT). The critical irradiation conditions to suppress CrRP formation were identified as 300 °C and 10-3 dpa/s; CrRP formation occurred readily at lower dose rates or higher temperatures. From 0.37 to 3.7 dpa, CrRP were observed to slightly grow at 350 °C and strongly coarsen at 450 °C. Specimens with pre-existing CrRP evolved into a similar precipitate distribution as detected after ion irradiation on solution annealed specimens at 300–350 °C to 0.37 dpa, indicating that the precipitate microstructure approaches a quasi-equilibrium for doses <1 dpa. Limited shrinking of pre-existing CrRP was observed after irradiation at 450 °C to 0.37 dpa, indicating a higher recovery rate at this temperature. Additionally, the evolution of CrRP is quantitatively explained by employing corrections to the historic Nelson-Hudson-Mazey precipitate stability model, and a radiation modified precipitation mechanism is proposed to account for the competition between radiation enhanced diffusion and ballistic dissolution which results in the modifications on both size and solute concentration of CrRP.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Insights into the year-round vertical distribution of chlorophyll concentration in high-latitude Arctic Ocean: implications for primary production

Climate-induced rapid changes in the Arctic Ocean, such as decreasing sea ice extent and increasing water temperature, are altering nutrient and light availability, profoundly impacting primary producer growth. However, access to the high-latitude Arctic Ocean is limited, and satellite data are primarily available only during summer, making continuous in-situ data collection challenging. We collected year-round chlorophyll-a (Chl-a) concentration data in high-latitude regions using a mooring system and performed a comparative analysis with reanalysis data. Unlike previous satellite-based studies, which typically rely on surface measurements, we used the annual vertical distribution of Chl-a. These data were applied to the vertically generalized production model to accurately estimate annual primary production. The moored Chl-a concentration data showed that phytoplankton exhibited a typical subsurface chlorophyll maximum (SCM) layer as sea ice retreated in June. Contrary to the gradually deepening SCM distribution predicted by model-based reanalysis data, the SCM layer persisted for approximately 4 months. This indicates that light and nutrient conditions within the SCM layer remained stable, sustaining continuous phytoplankton growth. Annual primary production, reflecting this vertical distribution of Chl-a concentration, was 6.85 gC m −2 yr −1 . This exceeded satellite-based estimates by at least two-fold, highlighting the significant underestimation of primary production by satellite approaches. Estimating primary production while accounting for the vertical distribution of phytoplankton and light is essential for improving ecological models to better understand carbon cycle and food web changes in the Arctic Ocean, with important implications for climate change predictions.

Arctic Ocean↗

DOE OSTI2026

Tachyon: Intelligent Multi-Scale Modeling of Distributed Resilient Infrastructure and Workflows for Data Intensive HEP Analyses

The DOE High Energy Physics (HEP) program in Neutrino and Collider science drives data-intensive science and simulation on extreme-scale platforms. Modeling and optimizing the complex distributed components from experimental to leadership computing facilities are essential for HEP workflows to achieve required response times and resilience under various conditions. Tachyon proposes a framework for scalable modeling, simulation, and validation of key performance characteristics for the distributed infrastructure between FNAL and ALCF, along with associated HEP workflows.

Carothers, Chris [Rensselaer Poly.]↗

DOE OSTI2026

Tachyon: Intelligent Multi-Scale Modeling of Distributed Resilient Infrastructure and Workflows for Data Intensive HEP Analyses

Carothers, Chris [Rensselaer Poly.]↗

NASA NTRS1981

Variation Principles and Applications in the Study of Cell Structure and Aging

In this report we have attempted to show that "some reality lies concealed in biological variation". This "reality" has its principles, laws, mechanisms, and rules, only a few of which we have sketched. A related idea we pursued was that important information may be lost in the process of ignoring frequency distributions of physiological variables (as is customary in experimental physiology and gerontology). We suggested that it may be advantageous to expand one's "statistical field of vision" beyond simple averages +/- standard deviations. Indeed, frequency distribution analysis may make visible some hidden information not evident from a simple qualitative analysis, particularly when the effect of some external factor or condition (e.g., aging, dietary chemicals) is being investigated. This was clearly illustrated by the application of distribution analysis in the study of variation in mouse liver cellular and fine structure, and may be true of fine structural studies in general. In living systems, structure and function interact in a dynamic way; they are "inseparable," unlike in technological systems or machines. Changes in fine structure therefore reflect changes in function. If such changes do not exceed a certain physiologic range, a quantitative analysis of structure will provide valuable information on quantitative changes in function that may not be possible or easy to measure directly. Because there is a large inherent variation in fine structure of cells in a given organ of an individual and among individuals, changes in fine structure can be analyzed only by studying frequency distribution curves of various structural characteristics (dimensions). Simple averages +/- S.D. do not in general reveal all information on the effect of a certain factor, because often this effect is not uniform; on the contrary, this will be apparent from distribution analysis because the form of the curves will be affected. We have also attempted to show in this chapter that similar general statistical principles and mechanisms may be operative in biological and technological systems. Despite the common belief that most biological and technological characteristics of interest have a symmetric bell-shaped (normal or Gaussian) distribution, we have shown that more often than not, distributions tend to be asymmetric and often resemble a so-called log-normal distribution. We saw that at least three general mechanisms may be operative, i.e., nonadditivity of influencing factors, competition among individuals for a common resource, and existence of an "optimum" value for a studied characteristic; more such mechanisms could exist.

Economos, Angelos C.↗

NASA NTRS1982

Pitch angle distributions of geomagnetically trapped MeV helium ions during quiet times

It is noted that during geomagnetically quiet conditions, energetic radiation belt helium ion fluxes at MeV energies have been found to exhibit characteristic radial profiles and large pitch angle anisotropies. Compiling data from many experiments, a systematic dependence of this anisotropy with helium ion energy is deduced. Provided a certain approximation holds for the observed pitch angle distributions, an empirical relation is deduced involving the helium ion energy. The range of the total ion energy here is 0.59-9 MeV (148-2250 keV per nucleon). These values are obtained for L shells in the range where L is approximately 2 to 5. The results are compared with theoretical expectations, and a qualitative explanation for the observed trend is suggested.

Fritz, T. A.↗

NASA NTRS2015

High Ice Water Content at Low Radar Reflectivity near Deep Convection: Consistency of In Situ and Remote-Sensing Observations with Stratiform Rain Column Simulations - Part I

Occurrences of jet engine power loss and damage have been associated with flight through fully glaciated deep convection at -10 to -50 degrees Centigrade. Power loss events commonly occur during flight through radar reflectivity (Zeta (sub e)) less than 20-30 decibels relative to Zeta (dBZ - radar returns) and no more than moderate turbulence, often overlying moderate to heavy rain near the surface. During 2010-2012, Airbus carried out flight tests seeking to characterize the highest ice water content (IWC) in such low-radar-reflectivity regions of large, cold-topped storm systems in the vicinity of Cayenne, Darwin, and Santiago. Within the highest IWC regions encountered, at typical sampling elevations (circa 11 kilometers), the measured ice size distributions exhibit a notably narrow concentration of mass over area-equivalent diameters of 100-500 micrometers. Given substantial and poorly quantified measurement uncertainties, here we evaluate the consistency of the Airbus in situ measurements with ground-based profiling radar observations obtained under quasi-steady, heavy stratiform rain conditions in one of the Airbus-sampled locations. We find that profiler-observed radar reflectivities and mean Doppler velocities at Airbus sampling temperatures are generally consistent with those calculated from in situ size-distribution measurements. We also find that column simulations using the in situ size distributions as an upper boundary condition are generally consistent with observed profiles of radar reflectivity (Ze), mean Doppler velocity (MDV), and retrieved rain rate. The results of these consistency checks motivate an examination of the microphysical pathways that could be responsible for the observed size-distribution features in Ackerman et al. (2015).

Rain↗

NASA NTRS1979

Flight-measured afterbody pressure coefficients from an airplane having twin side-by-side jet engines for Mach numbers from 0.6 to 1.6

Afterbody pressure distribution data were obtained in flight from an airplane having twin side-by-side jet exhausts. The data were obtained in level flight at Mach numbers from 0.60 to 1.60 and at elevated load factors for Mach numbers of 0.60, 0.90, and 1.20. The test altitude varied from 2300 meters (7500 feet) to 15,200 meters (50,000 feet) over a speed range that provided a matrix of constant Mach number and constant unit Reynolds number test conditions. The results of the full-scale flight afterbody pressure distribution program are presented in the form of plotted pressure distributions and tabulated pressure coefficients with Mach number, angle of attack, engine nozzle pressure ratio, and unit Reynolds number as controlled parameters.

Steers, L. L.↗

DOE OSTI2021

Aerosol Deposition Inside a Spent Fuel Transportation and Storage Canister (Interim Report)

This report documents the progress in preparing the ANSYS/Fluent ® and MELCOR models to perform characterization studies of aerosols dispersal and deposition within a select spent fuel cask system. Steady state thermal-hydraulic cask response is modeled with both codes, at present, while the MELCOR source code is being modified to allow imposed thermal-hydraulic conditions with aerosol physics calculations. This will allow the MELCOR model to assume the thermal-hydraulic calculation from the ANSYS/Fluent ® , while only computing the aerosol physics. Detailed results are presented on the thermal-hydraulic analysis of the MAGNASTOR ® cask for the current ANSYS/Fluent ® model, with convergent conditions observed over two fidelities. While the MELCOR computation computes the steady state conditions, they differ sufficiently from that computed with ANSYS/Fluent ® . The MELCOR analysis include a set of UO 2 sources to investigate system response for interim reporting. The airborne concentrations and evolving distributions are presented. Model development is anticipated to continue as additional components impacting flow conditions or aerosol deposition within the MAGNASTOR ® cask and Westinghouse fuel assemblies are identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS1982

Rotational modulation of the chromospheric activity in the young solar-type star, X-1 Orionis

The IUE satellite was used to observe one of the youngest G stars (GO V) for which Duncan (1981) derives an age of 6 x 10 to the 8th power years from the Li abundance. Rotational modulation was looked for in the emission flux in the chromospheric and transition region lines of this star. Variations in the Ca 11 K-lines profile were studied with the CHF telescope at Mauna Kea. Results show that the same modulation of the emission flux of Ca 11 due to stellar rotation is present in the transition region feature of C IV and probably of He II. For other UV lines the modulation is not apparent, due to a more complex surface distribution of the active areas or supergranulation network, or a shorter lifetime of the conditions which give rise to these features, or to the uncertainities in the measured line strengths. The Mg II emission flux is constant to within + or - 3.4% implying a rather uniform distribution of Mg II emission areas. The Ca II emission not only shows a measurable variation in intensity but also variations in detailed line profile shape when observed at high resolution.

Boesgaard, A. M.↗

NASA NTRS1981

Contextual classification of multispectral image data

A general method is presented for exploiting both spatial and spectral information when classifying multispectral image data. This statistical classification algorithm utilizes the tendency of certain ground cover classes to be more likely to occur in some contexts than others. The theoretical model assumes the two-dimensional array of random observations and a 0-1 loss function, a distribution of the p-context array that is spatially invariant, and class-conditional independence for the observations. The problems that prevent the immediate use of this context classifier are the need for a generally applicable method for making adequate estimates of the context distribution and a reduction in the computational intensivity of the classifier. The former problem is being approached by a method that raises the relative frequency value for each class configuration to a power and uses the result as the context distribution estimate. The second is being approached by searching for a less computationally intensive algorithm.

Tilton, J. C.↗