Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Collision Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Monte Carlo study of vibrational relaxation processes

A new model is proposed for the computation of vibrational nonequilibrium in the direct simulation Monte Carlo method (DSMC). This model permits level to level vibrational transitions for the first time in a Monte Carlo flowfield simulation. The model follows the Landau-Teller theory for a harmonic oscillator in which the rates of transition are related to an experimental correlation for the vibrational relaxation time. The usual method for simulating such processes in the DSMC technique applies a constant exchange probability to each collision and the vibrational energy is treated as a continuum. A comparison of these two methods is made for the flow of nitrogen over a wedge. Significant differences exist for the vibrational temperatures computed. These arise as a consequence of the incorrect application of a constant exchange probability in the old method. It is found that the numerical performances of the two vibrational relaxation models are equal.

Boyd, Iain D.↗

Vibration-dissociation coupling in CO, N2 and O2 - An evaluation of analytic transition rate expressions

Closed form expressions for inelastic state-to-state and state-specific dissociative rate coefficients for utilization in vibrational master equation studies of shock heated CO, N2, and O2 highly dilute in Ar are considered. The master equation is linearized by neglecting diatom-diatom collisions and recombination. Master equation results indicate that the most significant contribution to dissociation comes from low and mid lying vibrational levels.

Gonzales, David A.↗

Logistic function as a characteristic of multipactor development

Simulations of multipacting with or without space charge effect bring out a different behavior of particle number growth, namely, the exponential growth of particle number in the simulations without space charge effect and the saturation of particle number (or collision and emission currents) when space charge is considered. That creates a certain confusion in evaluation and comparison of overall danger of multipactor between the approaches. On the other hand, both growth rate and total multipactor current loading at saturation are important for multipactor barriers evaluation. It was noticed and then verified that the logistic function, widely used in chemistry, biology, and ecosystem study, reproduces the particle number growth curves remarkably well. The function contains the parameters, which can be interpreted as particle number growth rate and multipactor current saturation level, so both become correlated and obtained simultaneously in one run. In this work it is shown how the logistic function can be used for characterization of the multipactor barriers and how it can be used for possible reduction of simulation time in the simulations with space charge effect.

Romanov, Gennady↗

Forward rapidity $J/ψ$ production as a function of charged-particle multiplicity in pp collisions at $\sqrt{s}$ = 5.02 and 13 TeV

The production of J/ψ is measured as a function of charged-particle multiplicity at forward rapidity in proton-proton (pp) collisions at center-of-mass energies $\sqrt{s}$ = 5.02 and 13 TeV. The J/ψ mesons are reconstructed via their decay into dimuons in the rapidity interval (2.5 < y < 4.0), whereas the charged-particle multiplicity density (dN ch /dη) is measured at midrapidity (|η| <; 1). The production rate as a function of multiplicity is reported as the ratio of the yield in a given multiplicity interval to the multiplicity-integrated one. This observable shows a linear increase with charged-particle multiplicity normalized to the corresponding average value for inelastic events (dN ch /dη/$\langle$dN ch /dη$\rangle$), at both the colliding energies. Measurements are compared with available ALICE results at midrapidity and theoretical model calculations. First measurement of the mean transverse momentum ($\langle$p T $\rangle$) of J/ψ in pp collisions exhibits an increasing trend as a function of dN ch /dη/$\langle$dN ch /dη$\rangle$ showing a saturation towards high charged-particle multiplicities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Direct photon production from hadronic sources in high-energy heavy-ion collisions

The low p{sub T} direct photon production from a variety of the hadronic sources is studied within the microscopic hadron-string dynamics transport approach for p+C, p+Pb, and Pb+Pb collisions at 160A GeV. The direct photon emission from elementary hadronic scatterings as well as meson-meson bremsstrahlung are incorporated. The influence of in-medium effects such as a collisional broadening of the vector-meson spectral functions on the photon emission rate is found to be hardly observable in the final spectra that are dominated by bremsstrahlung-type processes. The uncertainties in the subtraction of the 'background' from the photon decay of hadronic resonances inside the hot and dense fireball is investigated, additionally. Our findings are relevant for the interpretation and extraction of experimental data on direct photon production at low p{sub T}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of collisions on energetic particle-driven chirping bursts

In the presence of an energetic particle population in a dissipative plasma, self-trapped structures in phase-space (holes and clumps) emerge from nonlinear wave-particle interactions. Their dynamics can lead to a nonlinear continuous shifting of the wave frequency (chirping). The effects of collisions on chirping characteristics are investigated, with a one-dimensional kinetic model. Existing analytic theory is extended to account for Krook-like collisions, which quantitatively explains a significant departure from widely accepted square-root time dependency. Relaxation oscillations, associated with chirping bursts, are investigated in the presence of dynamical friction and velocity-diffusion. The period increases with decreasing drag and weakly increases with decreasing diffusion. The mechanism is clarified with a simple semi-analytic model of hole/clump pair, which satisfies a Fokker-Planck equation. The model shows that the linear growth rate cannot be obtained simply by fitting an exponential to the amplitude time-series.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic reconnection in high-energy-density laser-produced plasmas

Recently, novel experiments on magnetic reconnection have been conducted in laser-produced plasmas in a high-energy-density regime. Individual plasma bubbles self-generate toroidal, mega-gauss-scale magnetic fields through the Biermann battery effect. When multiple bubbles are created at small separation, they expand into one another, driving reconnection of this field. Reconnection in the experiments was reported to be much faster than allowed by both Sweet-Parker, and even Hall-MHD theories, when normalized to the nominal magnetic fields self-generated by single bubbles. Through particle-in-cell simulations (both with and without a binary collision operator), we model the bubble interaction at parameters and geometry relevant to the experiments. This paper discusses in detail the reconnection regime of the laser-driven experiments and reports the qualitative features of simulations. We find substantial flux-pileup effects, which boost the relevant magnetic field for reconnection in the current sheet. When this is accounted for, the normalized reconnection rates are much more in line with standard two-fluid theory of reconnection. At the largest system sizes, we additionally find that the current sheet is prone to breakup into plasmoids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental and Modeling of Low Pressure Plasma as a Complementary Process for Thermal Waste Treatment - 19270

Polymeric waste contaminated with radionuclides is a challenging wasteform in its raw state. This waste is characterized by its high volume to weight ratio, together with the hazard of its radiolysis and consequently, the generation of flammable and explosive gases (e.g. H2 and light hydrocarbons). Thus, minimizing waste volumes together with stabilizing the wasteform are of high significance in the treatment of contaminated polymers. Thermal decomposition of polymeric waste results in gas products, mainly hydrocarbon molecules (C2-C6), which cannot be released to the atmosphere for environmental reasons. Here, we study a secondary gas treatment reactor, using plasma formed by inductive radio-frequency (13.56 MHz RF), in order to decompose the hydrocarbon gas products into smaller molecules. As a case study, we compare the plasma treatment of gases from two sources: a mixed gaseous product collected from the pyrolytic decomposition of high-density polyethylene (HDPE), and industrial butane gas. We also examine the effects of systematic addition of Ar, N{sub 2} and Ar+N{sub 2} mixtures to the treated gases. In this work, we utilize optical emission spectroscopy (OES) to obtain in situ data from the region in the center of the inductive RF coil. The main emissions from discharges in the gases or their mixtures occur in the 200-700 nm spectral region. Their relative intensities depend strongly on the plasma excitation mode, N{sub 2} flow rate, and gas feed composition. The addition of N{sub 2} to the input gas enhanced hydrocarbon decomposition as compared to the addition of pure Ar. This can be attributed to decomposition by free-radical reactions rather than by particles collisions processes. We performed preliminary modeling of the plasma behavior from ignition to steady state, which takes less than 0.01 s under these conditions. These simulations will help us to better understand and optimize a variety of decomposition reactions. The results of this study suggest that coupling low pressure plasma to conventional thermal decomposition techniques can provide an effective treatment process for contaminated solid plastic waste. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An efficient surrogate model of secondary electron formation and evolution

This work extends the adjoint-deep learning framework for runaway electron (RE) evolution, developed by McDevitt et al. [Phys. Plasmas 32, 042503 (2025)], to account for large-angle collisions. By incorporating large-angle collisions, the framework allows the avalanche of REs to be captured, an essential component of RE dynamics. This extension is accomplished by using a Rosenbluth–Putvinski approximation to estimate the distribution of secondary electrons generated by large-angle collisions. By evolving both the primary and multiple generations of secondary electrons, the present formulation can capture both the detailed temporal evolution of a RE population beginning from an arbitrary initial momentum space distribution, along with providing approximations to the saturated growth and decay rates of the RE population. Predictions of the adjoint-deep learning framework are verified against a traditional RE solver, with good agreement present across a broad range of parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutrino quantum kinetics in compact objects

Neutrinos play a critical role of transporting energy and changing the lepton density within corecollapse supernovae and neutron star mergers. The quantum kinetic equations (QKEs) combine the effects of neutrino-matter interactions treated in classical Boltzmann transport with the neutrino flavor-changing effects treated in neutrino oscillation calculations. We present a method for extending existing neutrino interaction rates to full QKE source terms for use in numerical calculations. We demonstrate the effects of absorption and emission by nucleons and nuclei, electron scattering, electron-positron pair annihilation, nucleon-nucleon bremsstrahlung, neutrino-neutrino scattering. For the first time, we include all these collision terms self-consistently in a simulation of the full isotropic QKEs in conditions relevant to core-collapse supernovae and neutron star mergers. For our choice of parameters, the long-term evolution of the neutrino distribution function proceeds similarly with and without the oscillation term, though with measurable differences. We demonstrate that electron scattering, nucleon-nucleon bremsstrahlung processes, and four-neutrino processes dominate flavor decoherence in the protoneutron star (PNS), absorption dominates near the shock, and all of the considered processes except elastic nucleon scattering and neutrino-neutrino processes are relevant in the decoupling region. Lastly, we propose an effective decoherence opacity that at most energies predicts decoherence rates to within a factor of 10 in our model PNS and within 20% outside of the PNS.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling the Effect of Evaporative Flux and Colloidal Aggregation on Crud Deposition

During the last few years lot of research has been conducted to investigate and predict the Crud deposition in PWRs. One of the common findings of various experimental and computational studies is that thickness or amount of crud deposits is directly related to evaporative flux maps. Evaporation driven deposition profile on the surfaces takes different forms, i.e. from ring to disk shapes during initial stages and in the form of porous to impervious continuous layers covering the hot fuel surface at the later stages. The amount and thickness of these deposits although are directly related to evaporative flux, the relationship is much complex and can be dependent upon several other factors. A popular problem relating evaporative flux to particulate deposition has been well studied in the form of drying of sessile colloidal drops. It was proposed that, this phenomenon is due to a geometrical constraint: the free surface, constrained by a pinned contact line squeezes the fluid outwards to compensate for evaporative losses and thereby transporting particles to the contact line. Later on a quantitative relationship between evaporative flux and deposition rate was proposed and validated by the same group, which showed power-law relationship. Deposition studies conducted with controlled concentration of particles with subcooled nucleate boiling also showed a power-law relationship rather than a simpler linear relationship whereas physics of evaporation would tend to concentrate particles at linear rate. In a typical subcooled nucleate boiling system, bubble growth and departure time is of the order 1-2 ms, measured experimentally. Diffusion time constant for dilute spherical metallic colloids such as crud particulates, generally present as particulate in process piping, range from 0.0025-2.5 sec in water for a size range 0.1-1.0 μm. Colloidal behavioral characteristics during the growth of bubbles can be computed with escape time constant at collision, which is dependent on effective Hamaker constant. For minimum effective Hamaker constant of Hematite is -2.5 kT and diffusion time constant τ = 0.0025 sec, escape time constant is computed as Kramer rule, τexp[A/kT] magnitude is 0.03 sec or 30 ms. This clearly indicates that evaporation will cause particles to come together and they cannot escape at a fast enough rate which would lead them to form agglomerates. Therefore both effects of evaporative flux in conjunction with the agglomeration kinetics must be considered for modeling the crud deposition if the evaporative flux is known. In this paper, we propose a phenomenological model of colloidal transport and aggregation with evaporative flux. The dynamic of particles interactions while drying of sessile colloidal drops is developed by coupling general transport equation with Smoluchowshki Coagulation equation. Crud deposition on the nuclear fuel has been a serious problem with severe consequences in nuclear power plants. In several studies it has been consistently reported that crud deposition is directly related to evaporative flux on the nuclear fuel surfaces. However, it has not been established how to quantify the deposition rates of crud type particulates if the evaporative flux is known. This complex multiphysics problem is similar to coffee-ring effect, where the governing physics is understood more clearly. In this work, a simplified geometry is used to model the effects of evaporative flux acting at a boundary on the colloidal concentration. The effect of this condition on change in concentration is shown numerically. Further, agglomeration is suspected to play a significant role in high evaporative flux such as bubble nucleation. The coagulation kinetics is modeled using uniform particle distribution and the effective total concentration of colloids including original particles and agglomerates is studied. Once this model is validated with a simple separate effect experiments, it can be integrated to large scale PWR models of evaluating evaporative flux and chemistry models developed by Electrical Power Research Institute (EPRI). (authors)

42 ENGINEERING↗

Search for a cH signal in the associated production of at least one charm quark with a Higgs boson in the diphoton decay channel in pp collisions at $\sqrt{s}=13$ TeV

This paper presents the first search for a cH signal sensitive to the coupling of the charm quark (c) to the Higgs boson (H) in the associated production of at least one charm quark with a Higgs boson decaying to two photons. The results are based on a data set of proton-proton collisions at a center-of-mass energy of 13 TeV collected with the CMS experiment at the LHC, corresponding to an integrated luminosity of 138 fb −1 . Assuming the standard model (SM) rates for all other Higgs boson production processes, the observed (expected) upper limit at 95% confidence level on the cH signal strength is 243 (355) times the SM prediction. Under the same assumption, the observed (expected) allowed interval on the Higgs boson to charm quark coupling modifier, κ c , is |κ c | < 38.1 (|κ c | < 72.5) at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neural network model of neutral beam injection in the EAST tokamak to enable fast transport simulations

The neutral beam injection (NBI) system in EAST produces energetic neutral particles, which collide with electrons and ions in tokamak plasmas and heat the plasmas through Coulomb collisions. Moreover, it drives a non-inductive source of current, due to the charge-exchange collision between neutral particles and ions, and injects toroidal torque, which generates a toroidal rotation of the plasma. The effect caused by the NBI system, such as plasma heating, current drive, total neutron rate, momentum transfer, and shine-through, are modeled by a comprehensive module called NUBEAM. However, NUBEAM is computationally intensive since it relies on Monte Carlo methods. In this work, a neural network model has been developed as a surrogate model for NUBEAM in EAST. The database for neural-network model training, validation and testing is generated by running TRANSP for experimental discharges from recent EAST campaigns (after the latest NBI upgrade) while using the NUBEAM module. Simulation results illustrate that the trained neural network has the capability of replicating the predictions made by NUBEAM while demanding a significantly shorter execution time. Finally, these results indicate that surrogate models like the one proposed in this work could enable fast transport simulations for EAST after integrating them into a control-oriented predictive code such as COTSIM.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On numerical energy conservation for an implicit particle-in-cell method coupled with a binary Monte-Carlo algorithm for Coulomb collisions

We report conventional particle-in-cell (PIC) methods suffer from enhanced numerical heating (explicit PIC) or cooling (semi-implicit PIC) when coupled with a binary Monte-Carlo algorithm for Coulomb collisions. In this work, a fully-implicit θ-PIC scheme (with adjustable time-biasing parameter 1/2 ≤ θ ≤) is considered. The discrete change in energy of a closed system after a time step for this scheme scales with (1/2 - θ)C θ , where C θ is a positive definite quantity that depends on the frequency spectrum of the energy in the fields. Collisions lead to additional energy in the field fluctuations associated with high-frequency light waves produced by a numerical Bremsstrahlung process, which can result in a large increase in the numerical cooling rate for θ > 1/2. However, for θ = 1/2, energy is exactly conserved. The energy in the field fluctuations on long time scales agrees with that calculated using the equipartition theorem for a classical system in thermodynamic equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In situ observation of irradiation-induced enhancement to the desorption pressure of zirconium hydride in a nuclear reactor

We quantify the effect of a nuclear-reactor environment on the hydrogen isotope equilibrium vapor pressure over pure zirconium and zirconium hydride. A vacuum-sealed capsule containing a zirconium foil with 6 atom% deuterium was irradiated at a neutron flux of ~10 14 cm -2 s -1 at the University of Missouri Research Reactor (MURR). The internal stainless-steel (SS) sample holder acted as the heat source via gamma absorption. To measure low desorption pressures in a high-flux environment, we developed a method to transduce pressure from the measured sample temperature during irradiation, calibrating with known deuterium pressures in unirradiated capsules at various heating powers using an internal filament-heated system designed to mimic irradiation-induced heating. Our temperature-pressure transduction method operates similarly to a Pirani or thermocouple pressure gauge. The in-reactor measurements revealed a roughly 4-fold enhancement in desorption pressure after only 6 h of irradiation (~2 × 10 18 cm -2 neutron fluence) compared to thermal desorption in control experiments, indicating a nonthermal contribution from neutron irradiation. The slower temperature/pressure stabilization rate in the reactor suggests that desorption pressure enhancement increases with neutron fluence. Further, this enhancement signifies increased solubility of hydrogen isotopes in zirconium during irradiation. We propose that high-energy neutron collisions with hydrogen isotopes in hydrides lead to their decomposition at lower temperatures, supersaturating the surrounding αZr lattice and resulting in higher desorption pressure, which continues to rise as more hydrides dissolve with increasing neutron fluence.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CFD investigation of low-attrition air-reactor designs for the NETL chemical-looping combustion reactor

The flow dynamics and attrition characteristics of three air reactor designs are investigated using an Eulerian-Eulerian kinetic theory model. The hydrodynamics of these reactor designs are analyzed to identify the flow regimes in which the particles evolve. The investigated designs which differ in the configuration of the secondary flow ports, exhibit bubbling and turbulent fluidization regimes within similar spatial regions. The most substantial differences in the hydrodynamics was in the turbulent fluidized regions near the secondary inlets. The mechanical stressing environments undergone by the particles were analyzed using the collision energy spectra, reconstructed using the local flow field properties (i.e. granular temperature and particle number density). The spectra show that the increase in the specific collision power is associated with the regions near the secondary injector ports, which are in a turbulent fluidization regime. A simple analysis relying upon a partitioning of the energy spectrum, showed that attrition rate may be reduced by about 34% over the original design.

20 FOSSIL-FUELED POWER PLANTS↗

Star-forming galaxies as the origin of the ICECUBE PeV neutrinos

Star-forming galaxies, due to their high star formation rates, and hence large number of supernova remnants (SNRs) therein, are huge reservoirs of cosmic rays (CRs). These CRs collide with gases in galaxies and produce high-energy neutrinos through proton–proton collisions. In this paper, we calculate the neutrino production efficiency in star-forming galaxies by considering realistic galaxy properties, such as the gas density and galactic wind in star-forming galaxies. To calculate the accumulated neutrino flux, we use the infrared luminosity function of star-forming galaxies recently obtained by the Herschel PEP/HerMES survey. The intensity of CRs producing PeV neutrinos in star-forming galaxies is normalized with the observed CR flux at EeV (1 EeV = 10{sup 18} eV), assuming that SNR or hypernova remnants in star-forming galaxies can accelerate protons to EeV energies. Our calculations show that the accumulated neutrino emission produced by CRs in star-forming galaxies can account for the flux and spectrum of the sub-PeV/PeV neutrinos under reasonable assumptions on the CR confinement time in these galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Pressure broadening and shift of the cesium D{sub 1} transition by the noble gases and N{sub 2}, H{sub 2}, HD, D{sub 2}, CH{sub 4}, C{sub 2}H{sub 6}, CF{sub 4}, and {sup 3}He

The pressure broadening and shift rates for the cesium D{sub 1} (6 {sup 2}P{sub 1/2}<-6 {sup 2}S{sub 1/2}) transition with the noble gases and N{sub 2}, H{sub 2}, HD, D{sub 2}, CH{sub 4}, C{sub 2}H{sub 6}, CF{sub 4}, and {sup 3}He were obtained for pressures less than 300 torr at temperatures under 65 deg. C by means of laser absorption spectroscopy. The collisional broadening rate, gamma{sub L}, for He, Ne, Ar, Kr, Xe, N{sub 2}, H{sub 2}, HD, D{sub 2}, CH{sub 4}, C{sub 2}H{sub 6}, CF{sub 4}, and {sup 3}He are 24.13, 10.85, 18.31, 17.82, 19.74, 16.64, 20.81, 20.06, 18.04, 29.00, 26.70, 18.84, and 26.00 MHz/torr, respectively. The corresponding pressure-induced shift rates, delta, are 4.24, -1.60, -6.47, -5.46, -6.43, -7.76, 1.11, 0.47, 0.00, -9.28, -8.54, -6.06, and 6.01 MHz/torr. These rates have then been utilized to calculate Lennard-Jones potential coefficients to quantify the interatomic potential surfaces. The broadening cross section has also been shown to correlate with the polarizability of the collision partner.

74 ATOMIC AND MOLECULAR PHYSICS↗