Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONVERSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Effect of space layer doping on photoelectric conversion efficiency of InAs/GaAs quantum dot solar cells

We report an effect of photoelectric conversion efficiency (PCE) by space layer doping in InAs/GaAs quantum dot solar cells (QDSC) and δ-doped QDSC grown by molecular beam epitaxy. The PCEs of QDSC and δ-doped QDSC without anti-reflection coating were 10.8% and 4.3%, respectively. The QDSC had about four electrons per QD, and its ideality factor was temperature-independent, which implies that recombination of electron-hole pairs is suppressed by strong potential barriers around charged dots. From the deep level transient spectroscopy measurements, four defect levels, including QD with the activation energy ranges from 0.08 eV to 0.50 eV below GaAs conduction band edge, appeared. Especially, the M1 defect (E{sub c}-0.14 eV) was newly formed in δ-doped QDSC and its density was higher than those of M3 (E{sub c}-0.35 eV) and M4 (E{sub c}-0.50 eV) levels in QDSC. These results suggest that the photo-carriers recombining at M1 defect might be responsible for the reduction of PCE in δ-doped QDSC.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Global particle simulation of lower hybrid wave propagation and mode conversion in tokamaks

Particle-in-cell simulation of lower hybrid (LH) waves in core plasmas is presented with a realistic electron-to-ion mass ratio in toroidal geometry. Due to the fact that LH waves mainly interact with electrons to drive the current, ion dynamic is described by cold fluid equations for simplicity, while electron dynamic is described by drift kinetic equations. This model could be considered as a new method to study LH waves in tokamak plasmas, which has advantages in nonlinear simulations. The mode conversion between slow and fast waves is observed in the simulation when the accessibility condition is not satisfied, which is consistent with the theory. The poloidal spectrum upshift and broadening effects are observed during LH wave propagation in the toroidal geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Infrared spectroscopic investigation of nuclear spin conversion in solid CH{sub 4}

Infrared spectra of solid CH{sub 4} were studied in the ν{sub 3} and ν{sub 4} vibrational regions. The phase I crystal around 30 K showed broad absorption bands, whereas the phase II crystal at 6.9–10.3 K exhibited splitting of these bands after annealing above 20 K. The split peaks were assigned to the librating and almost freely rotating molecules in phase II on the basis of the peak spacings and time evolution of the peak intensities. From the quantitative analysis of the temporal changes of the R(0) and R(1) peak intensities, the relaxation rates of the numbers of molecules with J = 0 (I = 2) and J = 1 (I = 1) were determined in the temperature range of 6.9–10.3 K. We fitted the function resulting from a combination of direct and indirect relaxation processes mediated by phonons to the temperature dependence of these rates and obtained the activation energies of the indirect process: C ≃ 36 K. Since this value is higher than the energies of perturbed J = 2 states relative to the J = 1 state, we argue that the nuclear spin conversion through the J = 3 state also takes place.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum frequency up-conversion of continuous variable entangled states

We demonstrate experimentally quantum frequency up-conversion of a continuous variable entangled optical field via sum-frequency-generation process. The two-color entangled state initially entangled at 806 and 1518 nm with an amplitude quadrature difference squeezing of 3.2 dB and phase quadrature sum squeezing of 3.1 dB is converted to a new entangled state at 530 and 1518 nm with the amplitude quadrature difference squeezing of 1.7 dB and phase quadrature sum squeezing of 1.8 dB. Our implementation enables the observation of entanglement between two light fields spanning approximately 1.5 octaves in optical frequency. The presented scheme is robust to the excess amplitude and phase noises of the pump field, making it a practical building block for quantum information processing and communication networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Realistic vs sudden turn-on of natural incoherent light: Coherences and dynamics in molecular excitation and internal conversion

Molecular excitation with incoherent light is examined using realistic turn-on time scales, and results are compared to those obtained via commonly used sudden turn-on, or pulses. Two significant results are obtained. First, in contrast to prior studies involving sudden turn-on, realistic turn-on is shown to lead to stationary coherences for natural turn-on time scales. Second, the time to reach the final stationary mixed state, known to result from incoherent excitation, is shown to depend directly on the inverse of the molecular energy level spacings, in both sudden and realistic turn-on cases. The S{sub 0} → S{sub 2}/S{sub 1} internal conversion process in pyrazine is used as an example throughout. Implications for studies of natural light harvesting systems are noted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Down-conversion luminescence from (Ce, Yb) co-doped oxygen-rich silicon oxides

We have studied down-conversion photoluminescence (PL) from (Ce, Yb) co-doped “oxygen rich” silicon oxide films prepared by sputtering and annealing. The Ce{sup 3+} ∼510 nm PL is sensitive to the Ce concentration of the films and is much stronger for 3 at. % Ce than for 2 at. % Ce after annealing at 1200 °C. The PL emission and excitation spectroscopy results indicate that the excitation of Yb{sup 3+} is mainly through an energy transfer from Ce{sup 3+} to Yb{sup 3+}, oxide defects also play a role in the excitation of Yb{sup 3+} after lower temperature (∼800 °C) annealing. The Ce{sup 3+} 510 nm photon excites mostly only one Yb{sup 3+} 980 nm photon. Temperature-dependent PL measurements suggest that the energy transfer from Ce{sup 3+} to Yb{sup 3+} is partly thermally activated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

p-BaSi{sub 2}/n-Si heterojunction solar cells with conversion efficiency reaching 9.0%

p-BaSi{sub 2}/n-Si heterojunction solar cells consisting of a 20 nm thick B-doped p-BaSi{sub 2} epitaxial layer (p = 2.2 × 10{sup 18 }cm{sup −3}) on n-Si(111) (ρ = 1–4 Ω cm) were formed by molecular beam epitaxy. The separation of photogenerated minority carriers is promoted at the heterointerface in this structure. Under AM1.5 illumination, the conversion efficiency η reached 9.0%, which is the highest ever reported for solar cells with semiconducting silicides. An open-circuit voltage of 0.46 V, a short-circuit current density of 31.9 mA/cm{sup 2}, and a fill factor of 0.60 were obtained. These results demonstrate the high potential of BaSi{sub 2} for solar cell applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and light up-conversion luminescence properties of Er{sup 3+}-Yb{sup 3+}-W{sup 6+} substituted Bi{sub 4}Ti{sub 3}O{sub 12}

The structural and light up-conversion (UC) luminescence properties of W{sup 6+} substituted Bi{sub 3.79}Er{sub 0.03}Yb{sub 0.18}Ti{sub 3-x}W{sub x}O{sub 12} (0 ≤ x ≤ 0.10) ceramics prepared by solid state reaction method have been investigated. X-ray diffraction (XRD) confirms the formation of single phase material with orthorhombic structure. A decrease in the lattice parameters and unit cell volume is observed with increasing W content. Strong UC luminescence at 527, 548 and 662 nm is seen under an excitation of 980 nm for an optimum W content (x = 0.06) and is attributed to the transitions {sup 2}H{sub 11/2} →{sup 4}I{sub 15/2}, {sup 4}S{sub 3/2} →{sup 4}I{sub 15/2} and {sup 4}F{sub 9/2} →{sup 4}I{sub 15/2} respectively. The improved UC luminescence is ascribed to the reduced defects such as oxygen vacancies and change in the crystal field around Er{sup 3+} ions due to B-site (Ti{sup 4+}) substitution with W{sup 6+} ions. Enhanced UC emission is observed for an optimum content of w{sup 6+} in the prepared composition Bi{sub 3.79}Er{sub 0.03}Yb{sub 0.18}Ti{sub 3-x}W{sub x}O{sub 12} for x = 0.06.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shape-dependent conversion efficiency of Si nanowire solar cells with polygonal cross-sections

A deeper insight into shape-dependent power conversion efficiency (PCE) of Si nanowire (SiNW) solar cells with polygonal cross-sectional shapes, including trigon, tetragon, hexagon, and circle, has been explored based on the atomic-bond-relaxation approach and detailed balance principle. It has been found that the surface effect induced by the loss-coordination atoms located at edges and surfaces, as well as the thermal effect, plays the dominant roles for the band shift and PCE of SiNWs due to the lattice strain occurrence at the self-equilibrium state. Our predictions are consistent with the available evidences, providing an important advance in the development of Si-based nanostructures for the desirable applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrothermal energy conversion using electron gas volumetric change inside semiconductors

We propose and analyze an electrothermal energy converter using volumetric changes in non-equilibrium electron gas inside semiconductors. The geometric concentration of electron gas under an electric field increases the effective pressure of the electrons, and then a barrier filters out cold electrons, acting like a valve. Nano- and micro-scale features enable hot electrons to arrive at the contact in a short enough time to avoid thermalization with the lattice. Key length and time scales, preliminary device geometry, and anticipated efficiency are estimated for electronic analogs of Otto and Brayton power generators and Joule-Thomson micro refrigerators on a chip. The power generators convert the energy of incident photons from the heat source to electrical current, and the refrigerator can reduce the temperature of electrons in a semiconductor device. The analytic calculations show that a large energy conversion efficiency or coefficient of performance may be possible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Conversion of the optical orbital angular momentum in a plasmon-assisted second-harmonic generation

We experimentally demonstrate the plasmon-assisted second-harmonic generation of an optical orbital angular momentum (OAM) beam. Because of the shape resonance, the plasmons in a periodic array of rectangular metal holes greatly enhance the nonlinear optical conversion of an OAM state. The OAM conservation (i.e., 2l{sub 1} = l{sub 2} with l{sub 1} and l{sub 2} being the OAM numbers of the fundamental and second-harmonic waves, respectively) holds well under our experimental configuration. Our results provide a potential way to realize nonlinear optical manipulation of an OAM mode in a nano-photonic device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Internal electron conversion of the isomeric {sup 57}Fe nucleus state with an energy of 14.4 keV excited by the radiation of the plasma of a high-power femtosecond laser pulse

We recorded the spectrum of delayed secondary electrons ejected from the target, which was coated with a layer of iron enriched with the {sup 57}Fe isotope to 98%, under its irradiation by fluxes of broadband X-ray radiation and fast electrons from the plasma produced by a femtosecond laser pulse at an intensity of 10{sup 17} W cm{sup -2}. Maxima were identified at energies of 5.6, 7.2, and 13.6 keV in the spectrum obtained for a delay of 90 - 120 ns. The two last-listed maxima owe their origin to the internal electron conversion of the isomeric level with an energy of 14.4 keV and a lifetime of 98 ns to the K and L shells of atomic iron, respectively; the first-named level arises from a cascade K - L{sub 2}L{sub 3} Auger process. Photoexcitaion by the X-ray plasma radiation is shown to be the principal channel of the isomeric level excitation. (interaction of laser radiation with matter)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ultraefficient thermophotovoltaic power conversion by band-edge spectral filtering

Thermophotovoltaic power conversion utilizes thermal radiation from a local heat source to generate electricity in a photovoltaic cell. It was shown in recent years that the addition of a highly reflective rear mirror to a solar cell maximizes the extraction of luminescence. This, in turn, boosts the voltage, enabling the creation of record-breaking solar efficiency. Now we report that the rear mirror can be used to create thermophotovoltaic systems with unprecedented high thermophotovoltaic efficiency. This mirror reflects low-energy infrared photons back into the heat source, recovering their energy. Therefore, the rear mirror serves a dual function; boosting the voltage and reusing infrared thermal photons. This allows the possibility of a practical >50% efficient thermophotovoltaic system. Based on this reflective rear mirror concept, we report a thermophotovoltaic efficiency of 29.1 ± 0.4% at an emitter temperature of 1,207 °C.

14 SOLAR ENERGY↗

Startup Test Plan and Predictions for Highly Enriched Uranium to Low-Enriched Uranium Fuel Conversion at the University of Missouri Research Reactor

Nonpower reactors licensed by the U.S. Nuclear Regulatory Commission require a startup test plan as part of any facility modification to verify operability prior to resumption of operations. In order to support conversion of the University of Missouri Research Reactor from the use of highly enriched uranium to low-enriched uranium (LEU) fuel, a startup test plan has been devised to measure certain reactor physics parameters for the initial all-fresh LEU core licensing documentation that will be submitted. These parameters include the approach to critical, primary coolant void coefficient of reactivity, flux trap void coefficient of reactivity, determination of flux trap sample reactivity worth, radial and axial thermal neutron flux mapping, control blade worth calibration, primary and pool coolant temperature coefficient of reactivity, and flux mapping of experimental positions. Here, predictions for these parameters made using the Monte Carlo N-Particle Version 5 (MCNP5) radiation transport code are reported. These predictions will support the startup tests by providing a baseline set of expectations and additional insight into the performance of the LEU core.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tritium Retention in Hexavalent Chromate-Conversion–Coated Aluminum Alloy

In this work, 6061-T6 aluminum samples were subjected to MIL-DTL-5541F type I, class-3 anodic coatings, where a yellow irradiate finish was achieved. Both chromate-conversion coatings (CCC) and unmodified samples were exposed to DT (PT = 0.51 atm) gas for 24 h at room temperature. Following loading, the samples were subjected to one of two desorption techniques: temperature-programmed desorption, or a surface stripping technique. The results show that chromic-acid anodizing of aluminum dramatically increases the total quantity of tritium retained by the treated surface as compared to unmodified aluminum. X-ray photoelectron spectroscopy and scanning electron microscopy studies of both treated aluminum and unmodified samples indicate that the CCC coating contain significant quantities of hydrated chromium. Using transmission electron microscopy, the surface is shown to have significant cracking and fracturing of the film and leads to a highly grained and porous surface. Such surface defects coupled with the vast quantity of hydration sites are likely reasons for the increased retained tritium inventory observed for CCC samples. Finally, due to the physical and chemical properties of unmodified CCC samples, they are not suitable for use in tritium environments.

36 MATERIALS SCIENCE↗

MODE CONVERSION BETWEEN DIFFERENT RADIAL ORDERS FOR SOLAR ACOUSTIC WAVES SCATTERED BY SUNSPOTS

We study the mode conversion between different radial orders for solar acoustic waves interacting with sunspots. Solar acoustic waves are modified in the presence of sunspots. The modification in the wave can be viewed as that the sunspot, excited by the incident wave, generates the scattered wave, and the scattered wave is added to the incident wave to form the total wave inside and around the sunspot. The wavefunction of the acoustic wave on the solar surface is computed from the cross-correlation function. The wavefunction of the scattered wave is obtained by subtracting the wavefunction of the incident wave from that of the total wave. We use the incident waves of radial order n = 0-5 to measure the scattered wavefunctions from n to another radial order n' for NOAAs 11084 and 11092. The strength of scattered waves decreases rapidly with |Δn|, where Δn ≡ n' – n. The scattered waves of Δn = ±1 are visible for n ≤ 1, and significant for n ≥ 2. For the scattered wave of Δn = ±2, only few cases are visible. None of the scattered waves of Δn = ±3 are visible. The properties of scattered waves for Δn = 0 and Δn ≠ 0 are different. The scattered wave amplitude relative to the incident wave amplitude decreases with n for Δn = 0, while it increases with n for Δn ≠ 0. The scattered wave amplitudes of Δn = 0 are greater for the larger sunspot, while those of Δn ≠ 0 are insensitive to the sunspot size.

79 ASTRONOMY AND ASTROPHYSICS↗