Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BEAM LINES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Inhomogeneous width of oxygen-deficient centers induced by electron irradiation of silica

We report a study of the luminescence activity of oxygen-deficient centers stabilized in as-grown synthetic silica, as compared with the same defects induced by {beta} irradiation at increasing doses, ranging from 1.2x10{sup 3} to 5x10{sup 6} kGy. We experimentally observe a progressive broadening of the luminescence band with increasing total electron dose released on samples. By analyzing our data within a theoretical model capable of separating homogeneous and inhomogeneous contribution to the total luminescence linewidth, we observe that the increasing of the width is entirely ascribable to the inhomogeneous component which increases, in the most irradiated sample, of 60% with respect to the value in the as-grown sample. This effect can be due either to the progressive creation of new defects statistically exploring different sites of the matrix, or to a progressive structural transformation of silica host which affects the optical properties of induced point defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Infrared Laser-Induced Isotope-Selective Dissociation of Molecular van der Waals (SF{sub 6}){sub m}Ar{sub n} Clusters

The results of studies on the isotope-selective dissociation of homogeneous and mixed van der Waals (SF{sub 6}){sub m}Ar{sub n} clusters induced by infrared laser radiation are presented. The method is based on the selective vibrational excitation of clusters by an infrared laser, which leads to their heating and dissociation. An experimental setup and procedure are described. The results of measurements of the efficiency and selectivity of cluster dissociation at different pressures and gas compositions above the nozzle, as well as various parameters of laser radiation, are presented. The dependences of the efficiency and selectivity of cluster dissociation on the frequency and power of the exciting laser radiation on the composition and pressure of gas above the nozzle, as well as on the distance of the irradiation zone of the particles on the nozzle exit are obtained. It is shown that the frequency of laser radiation and the composition and pressure of gas above the nozzle significantly affect the parameters of selective infrared dissociation of clusters. Experiments on isotope-selective dissociation of both homogeneous (SF{sub 6}){sub m} clusters and mixed (SF{sub 6}){sub m}Ar{sub n} clusters are performed. It was found that, with the dissociation of (SF{sub 6}){sub m}Ar{sub n} clusters, a rather high selectivity can be reached. Thus, in the case of an SF{sub 6}/Ar mixture at a pressure ratio of 1/200, for the selectivity of dissociation of ({sup 32}SF{sub 6}){sub 2} clusters with respect to {sup 34}SF{sub 6}{sup 32}SF{sub 6} clusters, the values ≥10–20 are obtained under conditions of irradiation by a beam on the 10P(32) laser line (at a frequency of 932.96 cm{sup –1}). Conditions are found when the values of efficiency and selectivity of dissociation of homogeneous (SF{sub 6}){sub m} clusters and mixed (SF{sub 6}){sub m}Ar{sub n} clusters are optimal.

74 ATOMIC AND MOLECULAR PHYSICS↗

Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718

Preliminary research has demonstrated the ability to utilise novel scan strategies in the electron beam melting (EBM) process to establish control of crystallographic texture within Inconel 718 deposits. Conventional EBM scan strategies and process parameters yield coarse columnar grains aligned parallel to the build direction. Through varying process parameters such as beam power, beam velocity, beam focus and scan strategy, the behaviour of the electron beam can be manipulated from a line source to a point source. The net effect of these variations is that the resulting crystallographic texture is controlled in a manner to produce either epitaxial deposits or fully equiaxed deposits. Furthermore, this research demonstrates the ability to change the crystallographic texture on the macroscale indicating that EBM technology can be used to create complex geometric components with both site-specific microstructures and material properties.

36 MATERIALS SCIENCE↗

HERMES 2019 Upgrade Characterization - Quick Look Report (UUR)

Characterizing the electromagnetic environment created by the recently upgraded HERMES III pulser is the primary objective addressed by this report. The pulser upgrade design was intended not only to provide higher electric field and magnetic field illumination amplitudes but also to provide a more collimated beam, focused along the center-line of the courtyard. For high-voltage pulsers to be useful as qualification systems, they must have the requisite peak values and uniform, predictable peak field spatial patterns. To assess the peak electric field values and uniformity of the spatial pattern of the electric fields for the upgraded HERMES system, a 1 6 full-power shot illumination of 9 electric and 9 magnetic field sensors in the courtyard of the HERMES III facility was conducted. The data acquired from this test showed an increase an increase in electric field amplitude, but still an asymmetry in the spatial distributions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low Energy Muon Capture and Transport from a Heavy Target

The MeV Test Area (MTA) secondary beamline is currently designed to produce and capture a low energy pion beam that then produces a tertiary muon beam via decay along the secondary line. The challenge presented in capturing muons from low-energy decay-in-flight pions, is the large decay angle that results from the low momentum. The current air-core quadruples lack the strength to bend/capture muons at large angles. Recently much stronger 400- MeV Linac quadrupoles have become available which are capable of strong focusing and large-angle capture. Initial results from this upgrade and reconfiguration indicate a major improvements in angle acceptance and transport ability for low-energy muons.

Winter, Wesley↗

Injection simulations of space charge dominated proton beams in IOTA

Injection simulations of space charge dominated proton beams in IOTA ABSTRACT = A 2.5 MeV proton injector has been constructed for the IOTA ring at Fermilab to study the interaction of nonlinear integrable optics (NIO) with high space charge beams. Space charge in the transport line from the RFQ to the injection location has a significant current dependent effect on the phase space. Simulation studies to support efficient injection of intense bunches into IOTA are presented, included schemes to inject directly into NIO lattices.

Wieland, J. [Fermilab]↗

Theory of decametric radio emissions from Jupiter.

It is suggested that the Jovian decametric emissions (DAM) originate in a cyclotron instability of weakly relativistic electrons trapped in the Jovian magnetic field. The resulting radiation has a group velocity in the magnetospheric plasma which may be of order 100 km/sec, and thus takes much more time to escape the magnetosphere than if the group velocity were at or near the speed of light. Therefore, the asymmetry of the Io phase with respect to sources east and west of the Earth-Jupiter line does not imply an asymmetric beaming of DAM; it is caused by the delay the waves experience in traversing the magnetosphere. The frequency drifts of milli- and decasecond bursts are also explained.

Wu, C. S.↗

Mass spectrometry

Advances in mass spectrometry (MS) and its applications over the past decade are reviewed in depth, with annotated literature references. New instrumentation and techniques surveyed include: modulated-beam MS, chromatographic MS on-line computer techniques, digital computer-compatible quadrupole MS, selected ion monitoring (mass fragmentography), and computer-aided management of MS data and interpretation. Areas of application surveyed include: organic MS and electron impact MS, field ionization kinetics, appearance potentials, translational energy release, studies of metastable species, photoionization, calculations of molecular orbitals, chemical kinetics, field desorption MS, high pressure MS, ion cyclotron resonance, biochemistry, medical/clinical chemistry, pharmacology, and environmental chemistry and pollution studies.

Burlingame, A. L.↗

Charge-equilibrium and radiation of low-energy cosmic rays passing through interstellar medium

The charge equilibrium and radiation of an oxygen and an iron beam in the MeV per nucleon energy range, representing a typical beam of low-energy cosmic rays passing through the interstellar medium, is considered. Electron loss of the beam has been taken into account by means of the First Born approximation allowing for the target atom to remain unexcited, or to be excited to all possible states. Electron capture cross sections have been calculated by means of the scaled Oppenheimer-Brinkman-Kramers approximation, taking into account all atomic shells of the target atoms. Radiation of the beam due to electron capture into the excited states of the ion, collisional excitation and collisional inner-shell ionization of the ions has been considered. Effective X-ray production cross sections and multiplicities for the most energetic X-ray lines emitted by the Fe and O beams have been calculated.

Rule, D. W.↗

Theory of the accretion column and cyclotron radiation in X ray pulsars

The energetics of the decelerating matter in the accretion column of X-ray pulsars is considered, in particular the Coulomb process. A two zone model is presented to account for the continuum and cyclotron line emission, incorporating a fan-beam radiation scheme, which appears able to explain the observed properties.

Meszaros, P.↗

An equipotential model for auroral arcs - The theory of two-dimensional laminar electrostatic shocks

The two-dimensional current-driven shock theory of Swift (1976) is reformulated in a way that removes previous restrictions on the shock thickness in relation to an ion gyrodiameter and also makes it possible to include effects of finite gyrational energy of the ions. The theory is applied to a shock model consisting of cold streaming electrons of magnetospheric origin and streaming ions of ionospheric origin, and it is shown that shock widths will be slightly less than the gyrodiameter of an ion whose energy is equal to the maximum potential difference across the shock. It is also shown that ions in passing through the shock may gain gyrational energy on the order of 10% of the parallel and the E x B energy gain. The theory also requires that the electron beam flux be largest on field lines where the precipitating electron experiences the largest energy gain.

Swift, D. W.↗

Analysis of ambient and beam particle characteristics during the ejection of an electron beam from a satellite in near-geosynchronous orbit on March 30, 1979

An electron beam system was operated over a wide range of beam currents and energies for periods both in sunlight and in eclipse. Complex pitch angle modulations of the electron spectra are separately decomposed for each beam operation. When electrons are emitted perpendicular to the magnetic field with an energy of 3 keV and a current of 0.10 mA they return as a coherent beam only to the parallel detector. Throughout the beam operations the pitch angle distributions show electrons with energy less than beam energy streaming along the field line. Analytic expressions for the satellite electric field are constructed and particle trajectories are determined.

Gussenhoven, M. S.↗

Project LOCOST: Laser or Chemical Hybrid Orbital Space Transport

A potential mission in the late 1990s is the servicing of spacecraft assets located in GEO. The Geosynchronous Operations Support Center (GeoShack) will be supported by a space transfer vehicle based at the Space Station (SS). The vehicle will transport cargo between the SS and the GeoShack. A proposed unmanned, laser or chemical hybrid orbital space transfer vehicle (LOCOST) can be used to efficiently transfer cargo between the two orbits. A preliminary design shows that an unmanned, laser/chemical hybrid vehicle results in the fuel savings needed while still providing fast trip times. The LOCOST vehicle receives a 12 MW laser beam from one Earth orbiting, solar pumped, iodide Laser Power Station (LPS). Two Energy Relay Units (ERU) provide laser beam support during periods of line-of-sight blockage by the Earth. The baseline mission specifies a 13 day round trip transfer time. The ship's configuration consist of an optical train, one hydrogen laser engine, two chemical engines, a 18 m by 29 m box truss, a mission-flexible payload module, and propellant tanks. Overall vehicle dry mass is 8,000 kg. Outbound cargo mass is 20,000 kg, and inbound cargo mass is 6,000 kg. The baseline mission needs 93,000 kg of propellants to complete the scenario. Fully fueled, outbound mission mass is 121,000 kg. A regeneratively cooled, single plasma, laser engine design producing a maximum of 768 N of thrust is utilized along with two traditional chemical engines. The payload module is designed to hold 40,000 kg of cargo, though the baseline mission specifies less. A proposed design of a laser/chemical hybrid vehicle provides a trip time and propellant efficient means to transport cargo from the SS to a GeoShack. Its unique, hybrid propulsion system provides safety through redundancy, allows baseline missions to be efficiently executed, while still allowing for the possibility of larger cargo transfers.

Dixon, Alan↗

Study of the polarization dependence of the photoelectric effect in the soft X-ray band - A focal plane photoelectric stellar X-ray polarimeter for the Spectrum-X-Gamma mission

An experimental study of the polarization dependence of the photoelectric effect in cesium iodide in the soft X-ray band was started (Heckler et al., 1989). At a grazing angle of 10 degrees and a photon energy of 2.6 keV, it is found that the photoelectric yield from a thin layer of evaporated cesium iodide varies by 12.4 percent as the polarization vector of the incident X-ray beam is rotated about the line-of-sight. The rotation angle corresponding to the maximum photoyield is displaced by 16 degrees from the normal to the photocathode. This modulation and phase shift are in good agreement with the results recently reported by Fraser, et al. (1989) It is shown that a focal plane stellar X-ray polarimeter based on this photoelectric effect will be substantially more efficient than convential X-ray polarimeters such as those based on either Bragg reflection or scattering from low atomic number targets.

Heckler, A.↗

A method for modeling discontinuities in a microwave coaxial transmission line

A method for modeling discontinuities in a coaxial transmission line is presented. The methodology involves the use of a nonlinear least-squares fit program to optimize the fit between theoretical data (from the model) and experimental data. When this method was applied to modeling discontinuities in a slightly damaged Galileo spacecraft S-band (2.295-GHz) antenna cable, excellent agreement between theory and experiment was obtained over a frequency range of 1.70-2.85 GHz. The same technique can be applied for diagnostics and locating unknown discontinuities in other types of microwave transmission lines, such as rectangular, circular, and beam waveguides.

Otoshi, T. Y.↗

Attitude steering for space shuttle based synthetic aperture radars

A technique is presented to steer the antenna beam to the zero-Doppler line for a spacecraft platform which operates in a non-zero roll attitude. The purposes of employing this attitude steering technique are reduction of the Doppler centroid error caused by the variation in target elevation; reduction of the Doppler centroid bound; and reduction of the Doppler drift. It is shown that a fixed attitude sequence can be easily accommodated in the radar command sequence to achieve nearly zero-Doppler steering. Implementation of this technique improves the image quality as well as simplifies the processor design.

Chang, C. Y.↗