Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Approximation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Calculated coupling efficiency between an elliptical-core optical fiber and an optical waveguide over temperature

To determine the feasibility of coupling the output of a single-mode optical fiber into a single-mode rib waveguide in a temperature varying environment, a theoretical calculation of the coupling efficiency between the two was investigated. Due to the complex geometry of the rib guide, there is no analytical solution to the wave equation for the guided modes, thus, approximation and/or numerical techniques must be utilized to determine the field patterns of the guide. In this study, three solution methods were used for both the fiber and guide fields; the effective-index method (EIM), Marcatili's approximation, and a Fourier method. These methods were utilized independently to calculate the electric field profile of each component at two temperatures, 20 C and 300 C, representing a nominal and high temperature. Using the electric field profile calculated from each method, the theoretical coupling efficiency between an elliptical-core optical fiber and a rib waveguide was calculated using the overlap integral and the results were compared. It was determined that a high coupling efficiency can be achieved when the two components are aligned. The coupling efficiency was more sensitive to alignment offsets in the y direction than the x, due to the elliptical modal field profile of both components. Changes in the coupling efficiency over temperature were found to be minimal.

Tuma, Margaret L.↗
NASA NTRS1992

Comparison of the Unified Perturbation Method with the two-scale expansion

The Unified Perturbation Method (UPM) converges faster over a wider domain of surface roughness than other perturbations, such as the small perturbation method, the phase perturbation method, the Kirchhoff approximation, and the momentum transfer expansion. It can be shown that UPM intrinsically possess characteristics similar to the two-scale expansion without requiring a free parameter. This paper considers whether the UPM can be improved by applying the two-scale concept to the method. In order to do so, the unknown source current is expanded in a two-scale manner starting from the extinction theorem. Several two-scale expansions are derived and are compared with the conventional two-scale approximation. It is shown that the UPM performs best without two-scale expansions.

Kim, Yunjin↗
NASA NTRS2014

Interpolation Method Needed for Numerical Uncertainty Analysis of Computational Fluid Dynamics

Using Computational Fluid Dynamics (CFD) to predict a flow field is an approximation to the exact problem and uncertainties exist. There is a method to approximate the errors in CFD via Richardson's Extrapolation. This method is based off of progressive grid refinement. To estimate the errors in an unstructured grid, the analyst must interpolate between at least three grids. This paper describes a study to find an appropriate interpolation scheme that can be used in Richardson's extrapolation or other uncertainty method to approximate errors. Nomenclature

CFD↗
DOE OSTI2024

Electron impact ionization in dense plasmas

Here, the distorted-wave with exchange (DWE) method is employed to evaluate electron impact ionization cross sections in dense electron–ion plasmas. Bound and continuum electron wave functions are obtained from a non-relativistic average-atom code. Plots of DWE cross sections are presented for 1s electrons in Li and Be plasmas and 2p electrons in Na and Mg plasmas. For each of these elements, cross sections are evaluated at metallic density in a range of temperatures from 10 to 100 eV and at their respective melting points. Resonances in the cross sections appear near the incident energy threshold at high temperatures. The origin of these resonances is discussed. In general, the distorted wave (DW) method without exchange is found to be a good approximation to the DWE method for electron impact ionization calculations. In the resonance region, however, exchange effects are found to be very important and cannot be neglected.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS2014

High-Order Implicit-Explicit Multi-Block Time-stepping Method for Hyperbolic PDEs

This work seeks to explore and improve the current time-stepping schemes used in computational fluid dynamics (CFD) in order to reduce overall computational time. A high-order scheme has been developed using a combination of implicit and explicit (IMEX) time-stepping Runge-Kutta (RK) schemes which increases numerical stability with respect to the time step size, resulting in decreased computational time. The IMEX scheme alone does not yield the desired increase in numerical stability, but when used in conjunction with an overlapping partitioned (multi-block) domain significant increase in stability is observed. To show this, the Overlapping-Partition IMEX (OP IMEX) scheme is applied to both one-dimensional (1D) and two-dimensional (2D) problems, the nonlinear viscous Burger's equation and 2D advection equation, respectively. The method uses two different summation by parts (SBP) derivative approximations, second-order and fourth-order accurate. The Dirichlet boundary conditions are imposed using the Simultaneous Approximation Term (SAT) penalty method. The 6-stage additive Runge-Kutta IMEX time integration schemes are fourth-order accurate in time. An increase in numerical stability 65 times greater than the fully explicit scheme is demonstrated to be achievable with the OP IMEX method applied to 1D Burger's equation. Results from the 2D, purely convective, advection equation show stability increases on the order of 10 times the explicit scheme using the OP IMEX method. Also, the domain partitioning method in this work shows potential for breaking the computational domain into manageable sizes such that implicit solutions for full three-dimensional CFD simulations can be computed using direct solving methods rather than the standard iterative methods currently used.

Nielsen, Tanner B.↗
DOE OSTI2015

Accuracy and convergence properties of the fixed-stress iterative solution of two-way coupled poromechanics

Here, the paper deals with the numerical solution of Biot's equations of coupled consolidation obtained by a mixed formulation combining continuous Galerkin finite–element and multipoint flux approximation finite–volume methods. The solution algorithm relies on the recently developed fixed–stress solution scheme, in which first the flow problem and then the mechanical one are addressed iteratively. We show that the algorithm can be interpreted as a particular block triangular preconditioning strategy applied within a Richardson iteration. The key component to the success of the preconditioner is the sparse approximation to the Schur complement based on a pressure space mass matrix scaled by a weighting factor that depends element–wise on the inverse of a suitable bulk modulus. The accuracy of the method is assessed, making use of well–known analytical solutions from the literature. Numerical results demonstrate robustness and low computational cost of the fixed–stress scheme in accurately capturing the two–way coupling between deformation and pressure.

58 GEOSCIENCES↗
DOE OSTI2015

Dispersion characteristics of planar grating with arbitrary grooves for terahertz Smith-Purcell radiation

In this paper, a novel method of getting the dispersion relations in planar grating with arbitrary grooves for terahertz Smith-Purcell radiation is investigated analytically. The continuous profile of the groove is approximately replaced by a series of rectangular steps. By making use of field matches method and the continuity of transverse admittance, the universal dispersion equation for grating with arbitrarily shaped grooves is derived. By solving the dispersion equation in presence of electron beam, the growth rate is obtained directly and the dependence on beam parameters is analyzed. Comparisons of the dispersion characteristics among some special groove shapes have been made by numerical calculation. The results show that the rectangular-step approximation method provides a novel approach to obtain the universal dispersion relation for grating with arbitrary grooves for Smith-Purcell radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

A modified Monte Carlo 'local importance function transform' method

The Local Importance Function Transform (LIFT) method uses an approximation of the contribution transport problem to bias a forward Monte-Carlo (MC) source-detector simulation [1-3]. Local (cell-based) biasing parameters are calculated from an inexpensive deterministic adjoint solution and used to modify the physics of the forward transport simulation. In this research, we have developed a new expression for the LIFT biasing parameter, which depends on a cell-average adjoint current to scalar flux (J{sup *}/{phi}{sup *}) ratio. This biasing parameter differs significantly from the original expression, which uses adjoint cell-edge scalar fluxes to construct a finite difference estimate of the flux derivative; the resulting biasing parameters exhibit spikes in magnitude at material discontinuities, causing the original LIFT method to lose efficiency in problems with high spatial heterogeneity. The new J{sup *}/{phi}{sup *} expression, while more expensive to obtain, generates biasing parameters that vary smoothly across the spatial domain. The result is an improvement in simulation efficiency. A representative test problem has been developed and analyzed to demonstrate the advantage of the updated biasing parameter expression with regards to solution figure of merit (FOM). For reference, the two variants of the LIFT method are compared to a similar variance reduction method developed by Depinay [4, 5], as well as MC with deterministic adjoint weight windows (WW). (authors)

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Electron-ion collision-frequency for x-ray Thomson scattering in dense plasmas

Two methods are presented to calculate the electron-ion collision-frequency in dense plasmas using an average-atom model. The first one is based on the Kubo-Greenwood approach. The second one uses the Born and Lenard-Balescu approximations. The two methods are used to calculate x-ray Thomson scattering spectra. Illustrations are shown for dense beryllium and aluminum plasmas. Comparisons with experiment are presented in the case of an x-ray Thomson scattering spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Development of a continuous linear model of a d-c to d-c flyback converter.

The analytical design of the feedback circuit for a d-c flyback converter requires the formulation of a model defining the static and dynamic performance of the forward loop. This paper describes the steps which were taken to develop a linear continuous model of a typical flyback circuit. Although the method uses several approximations to simplify the work, the resulting model was found to duplicate the performance of the actual circuit very closely. The model makes it possible to design the feedback circuit using well known linear feedback techniques. The method is an extension of prior work in the modeling of pulse-width controlled circuits.

Wells, B. A.↗
NASA NTRS1979

Solving the current element problem over lossy half-space without Sommerfeld integrals

An approach is presented for efficient computation of the vector potentials arising in the problem of a current element radiating over a lossy half-space. The present approach departs from the conventional ones in that it works primarily with the transform domain representations rather than with the Sommerfeld integrals which are the corresponding spatial domain counterparts. The key step in the present method is to approximate the transforms using a suitable approximation which is valid for a wide range of parameters of practical interest. The approximated transforms can be inverted in a closed form for the horizontal component of the vector potentials and can be expressed in a computationally efficient form for the vertical component. Numerical results illustrating the accuracy of the method are presented and some estimates of comparative computational times are also included.

Mittra, R.↗
NASA NTRS2004

A Most Probable Point-Based Method for Reliability Analysis, Sensitivity Analysis and Design Optimization

A major step in a most probable point (MPP)-based method for reliability analysis is to determine the MPP. This is usually accomplished by using an optimization search algorithm. The minimum distance associated with the MPP provides a measurement of safety probability, which can be obtained by approximate probability integration methods such as FORM or SORM. The reliability sensitivity equations are derived first in this paper, based on the derivatives of the optimal solution. Examples are provided later to demonstrate the use of these derivatives for better reliability analysis and reliability-based design optimization (RBDO).

Hou, Gene J.-W↗
DOE OSTI2017

A Fresh Math Perspective Opens New Possibilities for Computational Chemistry

By reformulating the TDDFT problem as a matrix function approximation, making use of a special transformation and taking advantage of the underlying symmetry with respect to a non-Euclidean metric, Yang and his colleagues were able to apply the Lanczos algorithm and a Kernal Polynomial Method (KPM) to approximate the absorption spectrum of several molecules. Both of these algorithms require relatively low-memory compared to non-symmetrical alternatives, which is the key to the computational savings.

Vu, Linda↗
NASA NTRS1996

Relativistic Navigation: A Theoretical Foundation

We present a theoretical foundation for relativistic astronomical measurements in curved space-time. In particular, we discuss a new iterative approach for describing the dynamics of an isolated astronomical N-body system in metric theories of gravity. To do this, we generalize the Fock-Chandrasekhar method of the weak-field and slow-motion approximation (WFSMA) and develop a theory of relativistic reference frames (RF's) for a gravitationally bounded many-extended-body problem. In any proper RF constructed in the immediate vicinity of an arbitrary body, the N-body solutions of the gravitational field equations are formally presented as a sum of the Riemann-flat inertial space-time, the gravitational field generated by the body itself, the unperturbed solutions for each body in the system transformed to the coordinates of this proper RF, and the gravitational interaction term. We develop the basic concept of a general WFSMA theory of the celestial RF's applicable to a wide class of metric theories of gravity and an arbitrary model of matter distribution. We apply the proposed method to general relativity. Celestial bodies are described using a perfect fluid model; as such, they possess any number of internal mass and current multipole moments that explicitly characterize their internal structures. The obtained relativistic corrections to the geodetic equations of motion arise because of a coupling of the bodies' multiple moments to the surrounding gravitational field. The resulting relativistic transformations between the different RF's extend the Poincare group to the motion of deformable self-gravitating bodies. Within the present accuracy of astronomical measurements we discuss the properties of the Fermi-normal-like proper RF that is defined in the immediate vicinity of the extended compact bodies. We further generalize the proposed approximation method and include two Eddington parameters (gamma, Beta). This generalized approach was used to derive the relativistic equations of satellite motion in the vicinity of the extended bodies. Anticipating improvements in radio and laser tracking technologies over the next few decades, we apply this method to spacecraft orbit determination. We emphasize the number of feasible relativistic gravity tests that may be performed within the context of the parameterized WFSMA. Based on the planeto-centric equations of motion of a spacecraft around the planet, we suggested a new null test of the Strong Equivalence Principle (SEP). The experiment to measure the corresponding SEP violation effect could be performed with the future Mercury Orbiter mission. We discuss other relativistic effects, including the perihelion advance and the redshift and geodetic precession of the orbiter's orbital plane about Mercury, as well as the possible future implementation of the proposed formalism in software codes developed for solar-system orbit determination. All the important calculations are completely documented, and the references contain an extensive list of cited literature.

Turyshev, Slava G.↗
DOE OSTI2024

A data-driven sensor placement approach for detecting voltage violations in distribution systems

Stochastic fluctuations in power injections from distributed energy resources (DERs) combined with load variability can cause constraint violations (e.g., exceeded voltage limits) in electric distribution systems. To monitor grid operations, sensors are placed to measure important quantities such as the voltage magnitudes. Here, in this paper, we consider a sensor placement problem which seeks to identify locations for installing sensors that can capture all possible violations of voltage magnitude limits. We formulate a bilevel optimization problem that minimizes the number of sensors and avoids false sensor alarms in the upper level while ensuring detection of any voltage violations in the lower level. This problem is challenging due to the nonlinearity of the power flow equations and the presence of binary variables. Accordingly, we employ recently developed conservative linear approximations of the power flow equations that overestimate or underestimate the voltage magnitudes. By replacing the nonlinear power flow equations with conservative linear approximations, we can ensure that the resulting sensor locations and thresholds are sufficient to identify any constraint violations. Additionally, we apply various problem reformulations to significantly improve computational tractability while simultaneously ensuring an appropriate placement of sensors. Lastly, we improve the quality of the results via an approximate gradient descent method that adjusts the sensor thresholds. We demonstrate the effectiveness of our proposed method for several test cases, including a system with multiple switching configurations.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2019

A composite neural network that learns from multi-fidelity data: Application to function approximation and inverse PDE problems

Presently the training of neural networks relies on data of comparable accuracy but in real applications only a very small set of high-fidelity data is available while inexpensive lower fidelity data may be plentiful. We propose a new composite neural network (NN) that can be trained based on multi-fidelity data. It is comprised of three NNs, with the first NN trained using the low-fidelity data and coupled to two high-fidelity NNs, one with activation functions and another one without, in order to discover and exploit nonlinear and linear correlations, respectively, between the low-fidelity and the high-fidelity data. We first demonstrate the accuracy of the new multi-fidelity NN for approximating some standard benchmark functions but also a 20-dimensional function that is not easy to approximate with other methods, e.g. Gaussian process regression. Subsequently, we extend the recently developed physics-informed neural networks (PINNs) to be trained with multi-fidelity data sets (MPINNs). MPINNs contain four fully-connected neural networks, where the first one approximates the low-fidelity data, while the second and third construct the correlation between the low- and high-fidelity data and produce the multi-fidelity approximation, which is then used in the last NN that encodes the partial differential equations (PDEs). Specifically, by decomposing the correlation into a linear and nonlinear part, the present model is capable of learning both the linear and complex nonlinear correlations between the low- and high-fidelity data adaptively. By training the MPINNs, we can: (1) obtain the correlation between the low- and high-fidelity data, (2) infer the quantities of interest based on a few scattered data, and (3) identify the unknown parameters in the PDEs. In particular, we employ the MPINNs to learn the hydraulic conductivity field for unsaturated flows as well as the reactive models for reactive transport. The results demonstrate that MPINNs can achieve relatively high accuracy based on a very small set of high-fidelity data. Despite the relatively low dimension and limited number of fidelities (two-fidelity levels) for the benchmark problems in the present study, the proposed model can be readily extended to very high-dimensional regression and classification problems involving multi-fidelity data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

A Novel Method for Phasor Measurement Unit Sampling Time Error Compensation

This paper focuses on a novel method for successive approximation register analog to digital converter control in synchronized phasor measurement units (PMUs). To compensate for the sampling time error caused by the division remainder between the desirable sampling rate and the oscillator frequency, a variable sampling interval control method is presented by interlacing two integers under a proposed criterion. The frequency of the onboard oscillator is monitored in real-time using the pulse per second (PPS) timing reference from global positioning system. The sampling control is adaptively adjusted each second according to the latest estimated oscillator frequency. The “saw tooth” in phasor angle error and DC offset and spikes in frequency error can be effectively eliminated by applying the proposed method. The simulation and experiment results validate the effectiveness and accuracy of the proposed method, which is believed to be able to greatly improve the performance of PPS-disciplined synchronous sampling methods in PMUs.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2004

A Most Probable Point-Based Method for Reliability Analysis, Sensitivity Analysis and Design Optimization

A major step in a most probable point (MPP)-based method for reliability analysis is to determine the MPP. This is usually accomplished by using an optimization search algorithm. The optimal solutions associated with the MPP provide measurements related to safety probability. This study focuses on two commonly used approximate probability integration methods; i.e., the Reliability Index Approach (RIA) and the Performance Measurement Approach (PMA). Their reliability sensitivity equations are first derived in this paper, based on the derivatives of their respective optimal solutions. Examples are then provided to demonstrate the use of these derivatives for better reliability analysis and Reliability-Based Design Optimization (RBDO).

Hou, Gene J.-W.↗