Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Conversion of above- and below-bandgap photons via InAs quantum dot media embedded into GaAs solar cell

Quantum dots (QDs) provide photovoltaic conversion of below-bandgap photons due to multistep electron transitions. QDs also increase conversion efficiency of the above-bandgap photons due to extraction of electrons from QDs via Coulomb interaction with hot electrons excited by high-energy photons. Nanoscale potential profile (potential barriers) and nanoscale band engineering (AlGaAs atomically thin barriers) allow for suppression of photoelectron capture to QDs. To study these kinetic effects and to distinguish them from the absorption enhancement due to light scattering on QDs, we investigate long, 3-μm base GaAs devices with various InAs QD media with 20 and 40 QD layers. Quantum efficiency measurements show that, at least at low doping, the multistep processes in QD media are strongly affected by the wetting layer (WL). The QD media with WLs provide substantial conversion of below-bandgap photons and for devices with 40 QD layers the short circuit current reaches 29.2 mA/cm{sup 2}. The QD media with band-engineered AlGaAs barriers and reduced wetting layers (RWL) enhance conversion of high-energy photons and decrease the relaxation (thermal) losses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrabroad stimulated emission from quantum well laser

Observation of ultrabroad stimulated emission from a simplex quantum well based laser at the center wavelength of 1.06 μm is reported. With increased injection current, spectrum as broad as 38 nm and a pulsed output power of ∼50 mW have been measured. The experiments show evidence of an unexplored broad emission regime in the InGaAs/GaAs quantum well material system, which still needs theoretical modeling and further analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrahigh sensitive sub-terahertz detection by InP-based asymmetric dual-grating-gate high-electron-mobility transistors and their broadband characteristics

We report on room-temperature plasmonic detection of sub-terahertz radiation by InAlAs/InGaAs/InP high electron mobility transistors with an asymmetric dual-grating-gate structure. Maximum responsivities of 22.7 kV/W at 200 GHz and 21.5 kV/W at 292 GHz were achieved under unbiased drain-to-source condition. The minimum noise equivalent power was estimated to be 0.48 pW/Hz{sup 0.5} at 200 GHz at room temperature, which is the record-breaking value ever reported for plasmonic THz detectors. Frequency dependence of the responsivity in the frequency range of 0.2–2 THz is in good agreement with the theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristics of stress-induced defects under positive bias in high-k/InGaAs stacks

The introduction of InGaAs as a channel material for complementary metal-oxide-semiconductor technology presents major challenges in terms of the characterization of the various defects that affect the performance and reliability. Understanding the generation of defects by constant voltage stresses is crucial in terms of their concentration profiles and energy levels. In particular, we want to understand the real nature of the defects responsible for the dispersion of C-V in strong accumulation. Here, we show that the degradation under positive bias of metal/Al{sub 2}O{sub 3}/n-InGaAs capacitors reveals two contributions depending on the temperature that affects the C-V curves in a different way. Based on features of stressed C-V curves, it is possible to estimate the onset point of the distribution of border traps near the midgap condition. The results suggest that these defects are strongly related to the characteristics of the InGaAs substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accumulation capacitance frequency dispersion of III-V metal-insulator-semiconductor devices due to disorder induced gap states

The origin of the anomalous frequency dispersion in accumulation capacitance of metal-insulator-semiconductor devices on InGaAs and InP substrates is investigated using modeling, electrical characterization, and chemical characterization. A comparison of the border trap model and the disorder induced gap state model for frequency dispersion is performed. The fitting of both models to experimental data indicate that the defects responsible for the measured dispersion are within approximately 0.8 nm of the surface of the crystalline semiconductor. The correlation between the spectroscopically detected bonding states at the dielectric/III-V interface, the interfacial defect density determined using capacitance-voltage, and modeled capacitance-voltage response strongly suggests that these defects are associated with the disruption of the III-V atomic bonding and not border traps associated with bonding defects within the high-k dielectric.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Digital model for X-ray diffraction with application to composition and strain determination in strained InAs/GaSb superlattices

We propose a digital model for high quality superlattices by including fluctuations in the superlattice periods. The composition and strain profiles are assumed to be coherent and persist throughout the superlattice. Using this model, we have significantly improved the fit with experimental X-ray diffraction data recorded from the nominal InAs/GaSb superlattice. The lattice spacing of individual layers inside the superlattice and the extent of interfacial intermixing are refined by including both (002) and (004) and their satellite peaks in the fitting. For the InAs/GaSb strained layer superlattice, results show: (i) the GaSb-on-InAs interface is chemically sharper than the InAs-on-GaSb interface, (ii) the GaSb layers experience compressive strain with In incorporation, (iii) there are interfacial strain associated with InSb-like bonds in GaSb and GaAs-like bonds in InAs, (iv) Sb substitutes a significant amount of In inside InAs layer near the InAs-on-GaSb interface. For support, we show that the composition profiles determined by X-ray diffraction are in good agreement with those obtained from atom probe tomography measurement. Comparison with the kinetic growth model shows a good agreement in terms of the composition profiles of anions, while the kinetic model underestimates the intermixing of cations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical spin injection into InGaAs/GaAs quantum wells: A comparison between MgO tunnel barriers grown by sputtering and molecular beam epitaxy methods

An efficient electrical spin injection into an InGaAs/GaAs quantum well light emitting diode is demonstrated thanks to a CoFeB/MgO spin injector. The textured MgO tunnel barrier is fabricated by two different techniques: sputtering and molecular beam epitaxy. The maximal spin injection efficiency is comparable for both methods. Additionally, the effect of annealing is also investigated for the two types of samples. Both samples show the same trend: an increase of the electroluminescence circular polarization (P{sub c}) with the increase of annealing temperature, followed by a saturation of P{sub c} beyond 350 °C annealing. Since the increase of P{sub c} starts well below the crystallization temperature of the full CoFeB bulk layer, this trend could be mainly due to an improvement of chemical structure at the top CoFeB/MgO interface. This study reveals that the control of CoFeB/MgO interface is essential for an optimal spin injection into semiconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proposal of high efficiency solar cells with closely stacked InAs/In{sub 0.48}Ga{sub 0.52}P quantum dot superlattices: Analysis of polarized absorption characteristics via intermediate–band

We present a theoretical study of the electronic structures and polarized absorption properties of quantum dot superlattices (QDSLs) using wide–gap matrix material, InAs/In{sub 0.48}Ga{sub 0.52}P QDSLs, for realizing intermediate–band solar cells (IBSCs) with two–step photon–absorption. The plane–wave expanded Burt–Foreman operator ordered 8–band k·p theory is used for this calculation, where strain effect and piezoelectric effect are taken into account. We find that the absorption spectra of the second transitions of two–step photon–absorption can be shifted to higher energy region by using In{sub 0.48}Ga{sub 0.52}P, which is lattice–matched material to GaAs substrate, as a matrix material instead of GaAs. We also find that the transverse magnetic polarized absorption spectra in InAs/In{sub 0.48}Ga{sub 0.52}P QDSL with a separate IB from the rest of the conduction minibands can be shifted to higher energy region by decreasing the QD height. As a result, the second transitions of two–step photon–absorption by the sunlight occur efficiently. These results indicate that InAs/In{sub 0.48}Ga{sub 0.52}P QDSLs are suitable material combination of IBSCs toward the realization of ultrahigh efficiency solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging surface plasmon polaritons using proximal self-assembled InGaAs quantum dots

We present optical investigations of hybrid plasmonic nanosystems consisting of lithographically defined plasmonic Au-waveguides or beamsplitters on GaAs substrates coupled to proximal self-assembled InGaAs quantum dots. We designed a sample structure that enabled us to precisely tune the distance between quantum dots and the sample surface during nano-fabrication and demonstrated that non-radiative processes do not play a major role for separations down to ∼10 nm. A polarized laser beam focused on one end of the plasmonic nanostructure generates propagating surface plasmon polaritons that, in turn, create electron-hole pairs in the GaAs substrate during propagation. These free carriers are subsequently captured by the quantum dots ∼25 nm below the surface, giving rise to luminescence. The intensity of the spectrally integrated quantum dot luminescence is used to image the propagating plasmon modes. As the waveguide width reduces from 5 μm to 1 μm, we clearly observe different plasmonic modes at the remote waveguide end, enabling their direct imaging in real space. This imaging technique is applied to a plasmonic beamsplitter facilitating the determination of the splitting ratio between the two beamsplitter output ports as the interaction length L{sub i} is varied. A splitting ratio of 50:50 is observed for L{sub i}∼9±1 μm and 1 μm wide waveguides for excitation energies close to the GaAs band edge. Our experimental findings are in good agreement with mode profile and finite difference time domain simulations for both waveguides and beamsplitters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Evaluation of thickness and strain of thin planar layers of InAs on GaAs(001) using spectroscopic ellipsometry

We develop a technique for accurately measuring thickness of planar InAs films grown on (001) GaAs by spectroscopic ellipsometry, using bulk optical constants. We observe that the critical point structure for the E{sub 1} and E{sub 1} + Δ{sub 1} transitions extracted from the measured dielectric properties varies with strain in the layer. Transmission electron microscopy confirms the extracted thickness and measures the residual strain based on the dislocation spacing in the film. At small thickness, the E{sub 1} critical point is seen to markedly deviate from the dependence predicted by deformation potential theory and appears to be consistent with additional quantum confinement effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of in-plane- and z-polarized intersubband transitions in pyramid-shaped InAs/GaAs quantum dots coupled to wetting layer: Size and shape matter

In this work, the effects of the shape and size on the intersubband electronic and optical properties of three-dimensional self-assembled pyramid-shaped InAs/GaAs quantum dots (QDs) were investigated in detail. More precisely, in-plane- and z-polarized transitions dipole moment (TDM), oscillator strength (OS), and absorption coefficients of P-to-S, WL-to-P, and WL-to-S transitions were studied as a function of the QD height. The P-to-S TDM showed to be strong and purely in-plane-polarized transition dominating two others. However, the TDMs and OSs of WL-to-P and WL-to-S transitions which are in-plane- and z-polarized transitions, respectively, showed a competition behavior for short and tall QDs. The former dominates for short QDs, and the latter for tall QDs. The physical reasons behind these interesting phenomena were also explained using the probability of finding the carriers in the pyramid region attached to the WL. The theoretical results are in good agreement with experimental data reported for short QDs [Appl. Phys. Lett. 82, 630 (2003)].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origins of interlayer formation and misfit dislocation displacement in the vicinity of InAs/GaAs quantum dots

We have examined the origins of interlayer formation and misfit dislocation (MD) displacement in the vicinity of InAs/GaAs quantum dots (QDs). For QDs formed by the Stranski-Krastanov mode, regularly spaced MDs nucleate at the interface between the QD and the GaAs buffer layer. In the droplet epitaxy case, both In island formation and In-induced “nano-drilling” of the GaAs buffer layer are observed during In deposition. Upon annealing under As flux, the In islands are converted to InAs QDs, with an InGaAs interlayer at the QD/buffer interface. Meanwhile, MDs nucleate at the QD/interlayer interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Volmer–Weber InAs quantum dot formation on InP (113)B substrates under the surfactant effect of Sb

We report on Sb surfactant growth of InAs nanostructures on GaAs{sub 0.51}Sb{sub 0.49} layers deposited on InP (001) and on (113)B oriented substrates. On the (001) orientation, the presence of Sb significantly favors the two-dimensional growth regime. Even after the deposition of 5 mono-layers of InAs, the epitaxial film remains flat and InAs/GaAs{sub 0.51}Sb{sub 0.49} type-II quantum wells are achieved. On (113)B substrates, same growth runs resulted in formation of high density InAs islands. Microscopic studies show that wetting layer is missing on (113)B substrates, and thus, a Volmer-Weber growth mode is concluded. These different behaviors are attributed to the surface energy changes induced by Sb atoms on surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modeling direct interband tunneling. I. Bulk semiconductors

Interband tunneling is frequently studied using the semiclassical Kane model, despite uncertainty about its validity. Revisiting the physical basis of this formula, we find that it neglects coupling to other bands and underestimates transverse tunneling. As a result, significant errors can arise at low and high fields for small and large gap materials, respectively. We derive a simple multiband tunneling model to correct these defects analytically without arbitrary parameters. Through extensive comparison with band structure and quantum transport calculations for bulk InGaAs, InAs, and InSb, we probe the accuracy of the Kane and multiband formulas and establish the superiority of the latter. We also show that the nonlocal average electric field should be used when applying either of these models to nonuniform potentials. Our findings are important for efficient analysis and simulation of bulk semiconductor devices involving tunneling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GaAsSb/GaAsN short-period superlattices as a capping layer for improved InAs quantum dot-based optoelectronics

The application of a GaAsSb/GaAsN short-period superlattice capping layer (CL) on InAs/GaAs quantum dots (QDs) is shown to be an option for providing improved luminescence properties to this system. Separating both GaAsSb and GaAsN ternaries during the growth in 2 monolayer-thick phases solves the GaAsSbN immiscibility-related problems. Strong fluctuations in the CL composition and strain field as well as in the QD size distribution are significantly reduced, and a more regular CL interface is also obtained. Room-temperature (RT) photoluminescence (PL) is obtained for overall N contents as high as 3%, yielding PL peak wavelengths beyond 1.4 μm in samples with a type-II band alignment. High external quantum efficiency electroluminescence and photocurrent from the QD ground state are also demonstrated at RT in a single QD-layer p-i-n device. Thus, it becomes possible to combine and transfer the complementary benefits of Sb- and N-containing GaAs alloys to InAs QD-based optoelectronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Near-infrared spectroscopy for divertor plasma diagnosis and control in DIII-D tokamak

New near infrared (NIR) spectroscopic measurements performed in the DIII-D tokamak divertor plasma suggest new viable diagnostic applications: divertor recycling and low-Z impurity flux measurements, a spectral survey for divertor Thomson scattering (DTS) diagnostic, and T{sub e} monitoring for divertor detachment control. A commercial 0.3 m spectrometer coupled to an imaging lens via optical fiber and a InGaAs 1024 pixel array detector enabled deuterium and impurity emission measurements in the range 800–2300 nm. The first full NIR survey identified D, He, B, Li, C, N, O, Ne lines and provided plasma T{sub e}, n{sub e} estimates from deuterium Paschen and Brackett series intensity and Stark line broadening analysis. The range 1.000–1.060 mm was surveyed in high-density and neon seeded divertor plasmas for spectral background emission studies for λ = 1.064 μm laser-based DTS development. The ratio of adjacent deuterium Paschen-α and Brackett Br9 lines in recombining divertor plasmas is studied for divertor T{sub e} monitoring aimed at divertor detachment real-time feedback control.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Charge state control in single InAs/GaAs quantum dots by external electric and magnetic fields

We report a photoluminescence (PL) spectroscopy study of charge state control in single self-assembled InAs/GaAs quantum dots by applying electric and/or magnetic fields at 4.2 K. Neutral and charged exciton complexes were observed under applied bias voltages from −0.5 V to 0.5 V by controlling the carrier tunneling. The highly negatively charged exciton emission becomes stronger with increasing pumping power, arising from the fact that electrons have a smaller effective mass than holes and are more easily captured by the quantum dots. The integrated PL intensity of negatively charged excitons is affected significantly by a magnetic field applied along the sample growth axis. This observation is explained by a reduction in the electron drift velocity caused by an applied magnetic field, which increases the probability of non-resonantly excited electrons being trapped by localized potentials at the wetting layer interface, and results in fewer electrons distributed in the quantum dots. The hole drift velocity is also affected by the magnetic field, but it is much weaker.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Be acceptors on the spin polarization of carriers in p-i-n resonant tunneling diodes

In this paper, we have investigated the effect of Be acceptors on the electroluminescence and the spin polarization in GaAs/AlAs p-i-n resonant tunneling diodes. The quantum well emission comprise two main lines separated by ∼20 meV attributed to excitonic and Be-related transitions, which intensities show remarkably abrupt variations at critical voltages, particularly at the electron resonant peak where it shows a high-frequency bistability. The circular-polarization degree of the quantum-well electroluminescence also shows strong and abrupt variations at the critical bias voltages and it attains relatively large values (of ∼−75% at 15 T). These effects may be explored to design novel devices for spintronic applications such as a high-frequency spin-oscillators.

36 MATERIALS SCIENCE↗