Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time dependent behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

The X-Ray Pulsar XTE J1858+034 Observed with NuSTAR and Fermi/GBM: Spectral and Timing Characterization plus a Cyclotron Line

Accreting X-ray pulsars (XRPs) undergo luminous X-ray outbursts during which the spectral and timing behavior of the neutron star can be studied in detail. We analyze a NuSTAR observation of the XRP XTE J1858+034 during its outburst in 2019. The spectrum is fit with a phenomenological, a semi-empirical and a physical spectral model. A candidate cyclotron line is found at 48 keV, implying a magnetic field of 5.4×1012G at the site of emission. This is also supported by the physical best-fit model. A nominal Gaia distance of 1.55 kpc is available for a star that is close to – although not coincident with – the previously proposed optical counterpart but, based on Fermi Gamma-ray Burst Monitor data, the standard disk accretion-torque theory allowed us to infer a distance of 10.9±1.0 kpc. Pulse profiles are single-peaked and show a pulsed fraction that is strongly energy-dependent at least up to 40keV.

C Malacaria↗
DOE OSTI2025

Scalability and Effectiveness of Smart Charge Management

The rise in electric vehicle (EV) adoption presents growing challenges for power grids, particularly from simultaneous residential charging, which can cause voltage fluctuations and increase feeder peak loads. Baltimore Gas and Electric (BGE), with support from the U.S. Department of Energy, initiated a pilot program to evaluate managed residential EV charging through Smart Charge Management (SCM). This study analyzes real-world charging behavior data from the pilot and feeder-level base loads from BGE to simulate residential charging scenarios through 2035 across the Washington, DC–Baltimore region. Grid impacts under unmanaged charging are compared to three SCM strategies: TOU-immediate, TOU-distributed, and Load Balancing. Results show that the magnitude of peak reduction is highly feeder-dependent. Some feeders achieve reductions of more than 40% at high enrollment levels, while others show improvements closer to 10–15%. This heterogeneity reflects differences in baseline feeder load shapes, EV penetration, and plug-in behavior across customers. Results also highlight trade-offs between shifting load away from peak periods and minimizing secondary demand peaks, offering practical insights for future utility program design.

Electric vehicle↗
NASA NTRS1989

Minimal modeling of the extratropical general circulation

The ability of low-order, two-layer models to reproduce basic features of the mid-latitude general circulation is investigated. Changes in model behavior with increased spectral resolution are examined in detail. Qualitatively correct time-mean heat and momentum balances are achieved in a beta-plane channel model which includes the first and third meridional modes. This minimal resolution also reproduces qualitatively realistic surface and upper-level winds and mean meridional circulations. Higher meridional resolution does not result in substantial changes in the latitudinal structure of the circulation. A qualitatively correct kinetic energy spectrum is produced when the resolution is high enough to include several linearly stable modes. A model with three zonal waves and the first three meridional modes has a reasonable energy spectrum and energy conversion cycle, while also satisfying heat and momentum budget requirements. This truncation reproduces the basic mechanisms and zonal circulation features that are obtained at higher resolution. The model performance improves gradually with higher resolution and is smoothly dependent on changes in external parameters.

O'Brien, Enda↗
NASA NTRS1994

Gravity gradient or gravity jitter induced viscous stress and moment fluctuations in microgravity

The dynamical behavior of fluids affected by the asymmetric gravity gradient and gravity jitter accelerations, in particular the effect of surface tension on partially-filled rotating fluids with a special example applicable to a full-scale Gravity Probe-B Spacecraft dewar tank, has been investigated. Results of slosh wave excitation along the liquid-vapor interface induced by gravity gradient acceleration indicated one-up one-down and one-down and one-up oscillations of two bubbles in the cross-section of doughnut profiles in the vertical r-z plane of a rotating dewar, and an eccentric contour of a bubble rotating around the axis of the dewar in the horizontal r-theta plane. Results of slosh wave excitation along the liquid-vapor interface induced by gravity jitter acceleration showed an equivalent to the time-dependent oscillatory force which pushes a bubble in the combined bubble motion of down-and-up and leftward-and-rightward as the bubble is rotating with respect to a rotating dewar axis. Fluctuations of fluid stress forces, fluid stress moments, and moment arm of fluid moment exerted on the dewar wall of the container due to slosh wave excitations driven by gravity gradient acceleration or gravity jitter acceleration are also investigated.

Hung, R. J.↗
NASA NTRS2003

Transferring Knowledge from Observations and Models to Decision Makers: An Overview and Challenges

Over the last 25 years, a tremendous progress has been made in the Earth science space-based remote sensing observations, technologies and algorithms. Such advancements have improved the predictability by providing lead-time and accuracy of forecast in weather, climate, natural hazards, and natural resources. It has further reduced or bounded the overall uncertainties by partially improving our understanding of planet Earth as an integrated system that is governed by non-linear and chaotic behavior. Many countries such US, European Community, Japan, China and others have invested billions of dollars in developing and launching space-based assets in the low earth (LEO) and geostationary (GEO) orbits. However, the wealth of this scientific knowledge that has potential of extracting monumental socio-economic benefits from such large investments have been slow in reaching to public and decision makers. For instance, there are a number of areas such as energy forecasting, aviation safety, agricultural competitiveness, disaster management, security, air quality and public health can directly take advantage. Nevertheless, we all live in a global economy that depends on access to the best available Earth Science information for all inhabitants of this planet. This paper surveys and examines a number such applications in terms of their architecture, maturity and economic applicability as they apply to the societal needs. A detailed analysis is also presented of various challenges and issues that pertain to a number of areas such as: (1) difficulties in making a speedy transition of data and information from observations and models to relevant Decision Support Systems (DSS) or tools, (2) data and models inter-operability issues, (3) limitations of spatial, spectral and temporal resolution, (4) communication limitations as dictated by the availability of image processing and data compression techniques. Additionally, the most critical element amongst all is the organizational and management boundaries that must be resolved at local, state, national and international levels to implement and realize free flow of such vital information. This paper also makes attempts to address this topic and discuss possible approaches to deal with this quandary.

Habib, Shahid↗
DOE OSTI2021

A Study on Computational Cost Reduction of Simulations of Phase-Change Material (PCM) Embedded Heat Exchangers

Thermal storage can be implemented using Phase-Change Materials (PCM), which absorb significant latent heat with a relatively small temperature change. PCM phase-change processes are transient and are driven by thermal diffusion and natural convection – the latter, especially for melting process. Modeling and simulation of PCM heat exchangers (HX’s) is typically computationally intensive due to the relatively complex time-dependent physics. Most of the PCM modeling work in the literature uses high-order modeling tools such as Computational Fluid Dynamics (CFD) and Lattice-Boltzmann Method (LBM). For design purposes, the existing PCM modeling approaches are not practical, limiting researchers in their ability to investigate new ideas and different PCM’s with faster turnarounds. This paper presents a study investigating the reduction of computational cost of PCM embedded HX’s CFD models by evaluating the feasibility of spatial reduction without losing accuracy. The analysis consists of comparing full and partial domain under full melting conditions. The subject of this study is a single straight tube with circular transverse fins in the vertical orientation, using PCM’s with 35oC nominal melting temperature. Different tube and fin dimensions are investigated. Results indicate that the reduced domain reproduces - in half the run time - the same behavior as the full domain since the buoyancy effects are localized and patterned. The outputs from the partial domain simulation were used to build a non-general correlation for the PCM heat transfer characteristics and demonstrated how it can be implemented in a Finite Control Volume Reduced Order Model (ROM). The ROM can accurately reproduce the CFD simulations at 4 to 5 orders of magnitude faster.

25 ENERGY STORAGE↗
DOE OSTI2023

Theoretical investigations on Kerr and Faraday rotations in topological multi-Weyl Semimetals

Motivated by the recent proposal of giant Kerr rotation in WSMs, we investigate the Kerr and Faraday rotations in time-reversal broken multi-Weyl semimetals (mWSMs) in the absence of an external magnetic field. Using the framework of Kubo response theory, we find that both the longitudinal and transverse components of the optical conductivity in mWSMs are modified by the topological charge ( n n ). Engendered by the optical Hall conductivity, we show in the thin film limit that, while the giant Kerr rotation and corresponding ellipticity are independent of n n , the Faraday rotation and its ellipticity angle scale as n n and n^2 n 2 , respectively. In contrast, the polarization rotation in semi-infinite mWSMs is dominated by the axion field showing n n dependence. In particular, the magnitude of Kerr (Faraday) angle decreases (increases) with increasing n n in Faraday geometry, whereas in Voigt geometry, it depicts different n n -dependencies in different frequency regimes. The obtained results on the behavior of polarization rotations in mWSMs could be used in experiments as a probe to distinguish single, double, and triple WSMs, as well as discriminate the surfaces of mWSMs with and without hosting Fermi arcs.

36 MATERIALS SCIENCE↗
NASA NTRS1997

A model for the kinetics of homotypic cellular aggregation under static conditions

We present the formulation and testing of a mathematical model for the kinetics of homotypic cellular aggregation. The model considers cellular aggregation under no-flow conditions as a two-step process. Individual cells and cell aggregates 1) move on the tissue culture surface and 2) collide with other cells (or aggregates). These collisions lead to the formation of intercellular bonds. The aggregation kinetics are described by a system of coupled, nonlinear ordinary differential equations, and the collision frequency kernel is derived by extending Smoluchowski's colloidal flocculation theory to cell migration and aggregation on a two-dimensional surface. Our results indicate that aggregation rates strongly depend upon the motility of cells and cell aggregates, the frequency of cell-cell collisions, and the strength of intercellular bonds. Model predictions agree well with data from homotypic lymphocyte aggregation experiments using Jurkat cells activated by 33B6, an antibody to the beta 1 integrin. Since cell migration speeds and all the other model parameters can be independently measured, the aggregation model provides a quantitative methodology by which we can accurately evaluate the adhesivity and aggregation behavior of cells.

Non-NASA Center↗
NASA NTRS2013

Time-Dependent Photoionization of Gaseous Nebulae: The Pure Hydrogen Case

We study the problem of time-dependent photoionization of low density gaseous nebulae subjected to sudden changes in the intensity of ionizing radiation. To this end, we write a computer code that solves the full timedependent energy balance, ionization balance, and radiation transfer equations in a self-consistent fashion for a simplified pure hydrogen case. It is shown that changes in the ionizing radiation yield ionizationthermal fronts that propagate through the cloud, but the propagation times and response times to such fronts vary widely and nonlinearly from the illuminated face of the cloud to the ionization front (IF). IFthermal fronts are often supersonic, and in slabs initially in pressure equilibrium such fronts yield large pressure imbalances that are likely to produce important dynamical effects in the cloud. Further, we studied the case of periodic variations in the ionizing flux. It is found that the physical conditions of the plasma have complex behaviors that differ from any steady-state solution. Moreover, even the time average of ionization and temperature is different from any steady-state case. This time average is characterized by overionization and a broader IF with respect to the steady-state solution for a mean value of the radiation flux. Around the time average of physical conditions there is a large dispersion in instantaneous conditions, particularly across the IF, which increases with the period of radiation flux variations. Moreover, the variations in physical conditions are asynchronous along the slab due to the combination of nonlinear propagation times for thermal frontsIFs and equilibration times.

Seyfert↗
NASA NTRS2022

The Spectral-Timing Analysis of Cygnus X-1 With Insight-HXMT

Cygnus X-1, as the first discovered black hole binary, is a key source for understanding the mechanisms of state transitions, and the scenarios of accretion in extreme gravity fields. We present a spectral-timing analysis of observations taken with the Insight-HXMT mission, focusing on the spectral-state dependent timing properties in the broad energy range of 1–150 keV, thus extending previous RXTE-based studies to both lower and higher energies. Our main results are the following: a) We successfully use a simple empirical model to fit all spectra, confirming that the reflection component is stronger in the soft state than in the hard state; b) The evolution of the total fractional root mean square (rms) depends on the selected energy band and the spectral shape, which is a direct result of the evolution of the power spectral densities (PSDs); c) In the hard/intermediate state, we see clear short-term variability features and a positive correlation between central frequencies of the variability components and the soft photon index Γ(sub 1), also at energies above 15 keV. The power spectrum is dominated by red noise in the soft state instead. These behaviors can be traced to at least 90 keV; d) The coherence and the phase-lag spectra show different behaviors dependent on different spectral shapes.

Binary X-rays↗
DOE OSTI2026

Formulation and Performance Evaluation of Epoxy Sealant Systems for Double-Shell Tank Bottom Refurbishment

The performance of epoxy sealants used in the refurbishment of double-shell tank (DST) systems requires balancing processability, thermomechanical stability, and adhesion to cementitious substrates. This study incorporates Heloxy 8 as a reactive diluent into Westlake 862 epoxy to tailor workability and cured-state properties. Rheological time-sweep analysis demonstrates that increasing the diluent content significantly reduces complex viscosity and extends workability, thereby improving pumpability and flow for large-area applications. However, the targeted 2-hour processing window is not fully achieved. Differential scanning calorimetry (DSC) confirms that all formulations cure at room temperature to glass transition temperatures ( T g ) at least 20 °C above the maximum DST operating temperature (27 °C), thereby ensuring service in the glassy regime. Dynamic mechanical analysis (DMA) reveals formulation-dependent reductions in tan delta and increases in storage modulus, indicating increasingly elastic and mechanically stable networks with diluent incorporation. Pull-off adhesion testing shows that modified formulations (70–90% Westlake epoxy) exhibit significantly higher adhesion strengths than the unmodified system. Grout cohesive failure indicates that interfacial bonding exceeds substrate strength. Collectively, these results demonstrate that controlled reactive diluent incorporation enables optimization of processing behavior, interfacial adhesion, and thermomechanical performance, supporting the suitability of the modified epoxy systems as durable sealant layers for cementitious barrier applications in hazardous waste containment infrastructure.

Differential scanning calorimetry↗
DOE OSTI2025

A Unified Interpretation of Variability in Precipitation Isotope Ratios

Abstract Several mechanisms have been proposed to explain why the isotope ratios of precipitation vary in space and time and why they correlate with other climate variables like temperature and precipitation. Here, we argue that this behavior is best understood through the lens of radiative transfer, which treats the depletion of atmospheric vapor transport by precipitation as analogous to the attenuation of light by absorption or scattering. Building on earlier work by Siler et al., we introduce a simple model that uses the equations of radiative transfer to approximate the two-dimensional pattern of the oxygen isotope composition of precipitation ( δ p ) from monthly mean hydrologic variables. The model accurately simulates the spatial and seasonal variability in δ p within a state-of-the-art climate model and permits a simple decomposition of δ p variability into contributions from gradients in evaporation and the length scale of vapor transport. Outside the tropics, δ p is mostly controlled by gradients in evaporation, whose dependence on temperature explains the positive correlation between δ p and temperature (i.e., the temperature effect). At low latitudes, δ p is mostly controlled by gradients in the transport length scale, whose inverse relationship with precipitation explains the negative correlation between δ p and precipitation (i.e., the amount effect). This suggests that the temperature and amount effects are both mostly explained by the variability in upstream rainout, but they reflect distinct mechanisms governing rainout at different latitudes. Significance Statement The isotopic composition of precipitation has long been used to make inferences about past climates based on its observed relationship with precipitation in the tropics and with temperature at higher latitudes. These relationships—known as the “amount effect” and “temperature effect,” respectively—have been attributed to many different mechanisms, most of which are thought to operate at either high or low latitudes but not both. Here, we present a unified framework for interpreting the isotope variability that can explain the latitude dependence of the temperature and amount effects despite making no distinction between high and low latitudes. Although our results are generally consistent with certain interpretations of the amount effect, they suggest that the temperature effect is widely misunderstood.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

Scaling of 100 kW class applied-field MPD thrusters

Three cylindrical applied-field magnetoplasmadynamic thrusters were tested with argon propellant over a broad range of operating conditions to establish empirical scaling laws for thruster performance. Argon flow rates, discharge currents, and applied-field strengths were varied between 0.025 and 0.14 g/s, 750 to 2000 A, and 0.034 to 0.20T, respectively. The results showed that the thrust reached over five times the self-field value, and that thrust increased linearly with the product of discharge current and applied-field strength and quadratically with the anode radius. While increasing the propellant flow rate increased the thrust, it did not affect the rate of thrust increase with applied-field strength, and at low propellant flow rates the self-field thrust approached 30 percent of the measured thrust. The voltage increased linearly with applied-field strength but was insensitive to the discharge current. The rate of voltage increase with applied-field strength dependent on anode radius. Thruster efficiency increased monotonically with applied-field strength and propellant flow rate. Peak thruster efficiencies were insensitive to changes in anode radius. Electrode power loss and thruster efficiency measurements showed that while the electrode losses decreased with increasing anode radius the plasma losses increased. The opposite behaviors of electrode and plasma losses demonstrates the need to identify ways of independently controlling the thruster loss mechanisms.

Myers, Roger M.↗
NASA NTRS1993

Time-variant analysis of rotorcraft systems dynamics - An exploitation of vector processors

In this paper a generalized algorithmic procedure is presented for handling constraints in mechanical transmissions. The latter are treated as multibody systems of interconnected rigid/flexible bodies. The constraint Jacobian matrices are generated automatically and suitably updated in time, depending on the geometrical and kinematical constraint conditions describing the interconnection between shafts or gears. The type of constraints are classified based on the interconnection of the bodies by assuming that one or more points of contact exist between them. The effects due to elastic deformation of the flexible bodies are included by allowing each body element to undergo small deformations. The procedure is based on recursively formulated Kane's dynamical equations of motion and the finite element method, including the concept of geometrical stiffening effects. The method is implemented on an IBM-3090-600j vector processor with pipe-lining capabilities. A significant increase in the speed of execution is achieved by vectorizing the developed code in computationally intensive areas. An example consisting of two meshing disks rotating at high angular velocity is presented. Applications are intended for the study of the dynamic behavior of helicopter transmissions.

Amirouche, F. M. L.↗
NASA NTRS2019

Simulation-Based Assessment of a Full-Scale Installed Quiet Landing Gear

Full-scale simulations of a Gulfstream G-III aircraft, performed in support of the NASA Acoustic Research Measurements flights, are presented to complement results discussed in earlier studies. The flow solver employed in those studies, Dassault Systèmes’ lattice Boltzmann PowerFLOW®, was also used during this investigation to conduct time-dependent simulations of the entire aircraft in landing configuration with a fully dressed landing gear. The high-fidelity simulations, performed at a Mach number of 0.23 and a Reynolds number of 10.5 × 106 based on mean aerodynamic chord, captured all relevant airframe noise sources. The computations were used to assess the aeroacoustic performance of the main landing gear, with and without noise reduction fairings installed, of a G-III aircraft equipped with Adaptive Compliant Trailing Edge technology and conventional Fowler flaps. To facilitate comparison of predicted noise signatures with effective perceived noise levels obtained from flight test measurements, the “as-flown” nose landing gear geometry, missing in our earlier studies, was added to the simulated G-III aircraft configurations. The high fidelity, synthetic data were post-processed using a Ffowcs-Williams and Hawkings integral approach to estimate farfield acoustic behavior, with pressures on the model solid surface or pressure and velocity components on a permeable surface enveloping the acoustic near field used as input.

Duda, Benjamin↗
NASA NTRS2022

Preferential Acceleration of Heavy Ions in a Spontaneously Fragmenting Flare Current Sheet

We study the ion acceleration in a mesoscale, spontaneously fragmenting flare current sheet (SFCS) characterized by the presence of a plasmoid cascade. The main subject of our investigation is to determine whether and how plasmoid cascades at intermediate scales in a fragmented current sheet of a solar flare can impact the (preferential) acceleration of specific ions. The time evolution of the SFCS is obtained from high-resolution 2.5D MHD simulations. The ion trajectories (in the background fields resulting from the MHD model), energies, and pitch angles are calculated using a relativistic test-particle code based on the half-acceleration–rotation–half-acceleration method. For light ions, the main acceleration effects of electromagnetic fields within the SFCS are analyzed using the guiding center approximation. We identify regions with the most-efficient ion acceleration within the SFCS, the accelerator efficiency, and spectra of the accelerated ions. The influence of the charge-to-mass ratio on ion behavior is also studied and resulting ion abundances are compared with observational data. The main ion acceleration takes place in the regions with a strong polarization term, which is part of the first-order Fermi acceleration. Because the term is mass dependent, heavier ions undergo preferential acceleration. The ion energy spectra, abundance-enhancement factors, and differential fluxes, obtained from the model, exhibit power-law profiles, in agreement with observed solar energetic particle events. Nonetheless, the obtained slopes for the abundance-enhancement factor do not exactly match the observed data. The computed slopes and profiles are not sensitive to changes in the initial plasma temperature.

David Kramoliš↗
DOE OSTI2021

Dependence of alpha-particle-driven Alfven eigenmode linear stability on device magnetic field strength and consequences for next-generation tokamaks

Recently-proposed tokamak concepts use magnetic fields up to 12 T, far higher than in conven- tional devices, to reduce size and cost. Theoretical and computational study of trends in plasma behavior with increasing field strength is critical to such proposed devices. This paper considers trends in Alfven eigenmode (AE) stability. Energetic particles, including alphas from D-T fusion, can destabilize AEs, possibly causing loss of alpha heat and damage to the device. AEs are sensitive to device magnetic field via the field dependence of resonances, alpha particle beta, and alpha orbit width. We describe the origin and effect of these dependences analytically and by using recently- developed numerical techniques (Rodrigues et al. 2015 Nucl. Fusion 55 083003). The work suggests high-field machines where fusion-born alphas are sub-Alfvenic or nearly sub-Alfvenic may partially cut off AE resonances, reducing growth rates of AEs and the energy of alphas interacting with them. High-field burning plasma regimes have non-negligible alpha particle beta and AE drive, but faster slowing down time, provided by high electron density, and higher field strength reduces this drive relative to low-field machines with similar power densities. The toroidal mode number of the most unstable modes will tend to be higher in high magnetic field devices. The work suggests that high magnetic field devices have unique, and potentially advantageous, AE instability properties at both low and high densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗