Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface modifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Simulation of Radon-222 with the GEOS-Chem Global Model: Emissions, Seasonality, and Convective Transport

Radon-222 (Rn-222) is a short-lived radioactive gas naturally emitted from land surfaces and has long been used to assess convective transport in atmospheric models. In this study, we simulate Rn-222 using the GEOS-Chem chemical transport model to improve our understanding of Rn-222 emissions and surface concentration seasonality and characterize convective transport associated with two Goddard Earth Observing System (GEOS) meteorological products, the Modern-Era Retrospective analysis for Research and Applications (MERRA) and GEOS Forward Processing (GEOS-FP). We evaluate four global Rn-222 emission scenarios by comparing model results with observations at 51 surface sites. The default emission scenario in GEOS-Chem yields a moderate agreement with surface observations globally (68.9 % of data within a factor of 2) and a large underestimate of winter surface Rn-222 concentrations at Northern Hemisphere midlatitudes and high latitudes due to an oversimplified formulation of Rn-222 emission fluxes (1 atom cm−2 s−1 over land with a reduction by a factor of 3 under freezing conditions). We compose a new global Rn-222 emission scenario based on Zhang et al. (2011) and demonstrate its potential to improve simulated surface Rn-222 concentrations and seasonality. The regional components of this scenario include spatially and temporally varying emission fluxes derived from previous measurements of soil radium content and soil exhalation models, which are key factors in determining Rn-222 emission flux rates. However, large model underestimates of surface Rn-222 concentrations still exist in Asia, suggesting unusually high regional Rn-222 emissions. We therefore propose a conservative upscaling factor of 1.2 for Rn-222 emission fluxes in China, which was also constrained by observed deposition fluxes of 210Pb (a progeny of Rn-222). With this modification, the model shows better agreement with observations in Europe and North America (> 80 % of data within a factor of 2) and reasonable agreement in Asia (close to 70 %). Further constraints on Rn-222 emissions would require additional concentration and emission flux observations in the central United States, Canada, Africa, and Asia. We also compare and assess convective transport in model simulations driven by MERRA and GEOS-FP using observed Rn-222 vertical profiles in northern midlatitude summer and from three short-term airborne campaigns. While simulations with both GEOS products are able to capture the observed vertical gradient of Rn-222 concentrations in the lower troposphere (0–4 km), neither correctly represents the level of convective detrainment, resulting in biases in the middle and upper troposphere. Compared with GEOS-FP, MERRA leads to stronger convective transport of Rn-222, which is partially compensated for by its weaker large-scale vertical advection, resulting in similar global vertical distributions of Rn-222 concentrations between the two simulations. This has important implications for using chemical transport models to interpret the transport of other trace species when these GEOS products are used as driving meteorology.

Bo Zhang↗

The Mars 2020 Perseverance Navigation Filter

The Mars 2020 (M2020) Entry Descent and Landing (EDL) system delivered a rover named “Perseverance” at Jezero crater (Mars) on February 18th, 2021. M2020 EDL used a Guidance Navigation and Control (GN&C) system to achieve its landing target objectives. The navigation filter (NavFilter) integrated Descent Inertial Measurement Unit (DIMU) measurements to estimate position and attitude. The NavFilter also used the Terminal Descent Sensor (TDS) to es-timate surface-relative position and velocity corrections. The NavFilter provided all of the dynamic state information to the entry controller, entry guidance, Lander Vision System (LVS) and powered descent guidance and control algo-rithms. The NavFilter for Perseverance is based on Curiosity’s NavFilter with a couple of modifications.

Casoliva, Jordi↗

System and method for engineered ceramic packages for use in fluid treatment technologies

The present disclosure relates to a fluid modification system having a container structure and a plurality of independent, ceramic elements. The ceramic elements may be arranged in random orientations and contained in the container structure, thus causing a fluid flow entering the container structure at any given cross-section location to flow over the surfaces of a first subplurality of the ceramic elements, and through the porous walls of a second subplurality of the ceramic elements, before exiting at a second location of the container structure. Each one of the ceramic elements has at least one of a nanofibrous or nanoporous microstructure to enable internal flow both through a wall structure thereof, and over and around the wall structure to affect performance.

Kelly, James Patrick↗

Modification of the continuous flow diffusion chamber for use in zero-gravity

The design philosophy and performance characteristics of the continuous flow diffusion chamber developed for use in ground-based simulation of some of the experiments planned for the atmospheric cloud physics laboratory during the first Spacelab flight are discussed. Topics covered include principle of operation, thermal control, temperature measurement, tem-powered heat exchangers, wettable metal surfaces, sample injection system, and control electronics.

Keyser, G.↗

Open millifluidics based on powder-encased channels

Millifluidics, the manipulation of liquid flow in millimeter-sized channels, has been a revolutionary concept in chemical processing and engineering. The solid channels that contain the liquids, though, are not flexible in their design and modification, and prevent contact with the external environment. All-liquid constructs, on the other hand, while flexible and open, are imbedded in a liquid environment. Here, we provide a route to circumvent these limitations by encasing the liquids in a hydrophobic powder in air that jams on the surface, containing and isolating flowing fluids, offering flexibility and adaptability in design, as manifest in the ability to reconfigure, graft, and segment the constructs. Along with the open nature of these powder-contained channels that allow arbitrary connections/disconnections and substance addition/extraction, numerous applications can be opened in the biological, chemical, and material arenas.

36 MATERIALS SCIENCE↗

Widening ERTS applications

In less than two years of operation ERTS-1 is shown to have successfully completed its experimental mission and to be delivering an ever-increasing roster of benefits. The widening ERTS applications reviewed include air quality and weather modification, aid to oil exploration, ore-deposit exploration, short-lived event observation, flood area assessment and flood-plain mapping, land and water quality assessment, soil association mapping, crop production measurements, wildlife resources, drought and desertification studies, ground-water exploration, watershed surveys, snow and ice monitoring, surface water mapping, and iceberg surveys. Future projects and developments are also briefly reviewed.

Mercanti, E. P.↗

Self-Cleaning Tubular-Membrane Module

Tubular membranes made self-cleaning with aid of flow reversing valve. Sponge balls scrub membrane surfaces as they travel inside membrane tubes. A four-way flow-reversal valve automatically reverses flow in tubes at preset intervals so sponge balls reciprocate along tubes. Baskets at ends of tubes prevent sponges from escaping. Automatic cleaning feature added to existing membrane processing equipment with minimal modifications.

Sarbolouki, M. N.↗

A parameterization for longwave surface radiation from satellite data - Recent improvements

Several improvements have been made recently to the parameterization for surface longwave radiation described by Gupta (1989). Model constants have been modified in order to use meteorological data from the International Satellite Cloud Climatology Project instead of from the TIROS Operational Vertical Sounder data, primarily to take advantage of the vastly superior cloud information available from the former. Additional modifications were made to improve the estimation of cloud effect in the presence of low-level clouds. The latter modifications reduced the systematic error of the overcast-sky fluxes from 10.0 to 1.7 W/sq m and the random error from +/- 18.9 to +/- 6.3 W/sq m when compared to the fluxes computed with a detailed radiative transfer model.

Gupta, Shashi K.↗

Regional-Scale Modeling at NASA Goddard Space Flight Center

Over the past decade, the Goddard Mesoscale Modeling and Dynamics Group has used a popular regional scale model, MM5, to study precipitation processes. Our group is making contributions to the MM5 by incorporating the following physical and numerical packages: improved Goddard cloud processes, a land processes model (Parameterization for Land-Atmosphere-Cloud Exchange - PLACE), efficient but sophisticated radiative processes, conservation of hydrometeor mass (water budget), four-dimensional data assimilation for rainfall, and better computational methods for trace gas transport. At NASA Goddard, the MM5 has been used to study: (1) the impact of initial conditions, assimilation of satellite-derived rainfall, and cumulus parameterizations on rapidly intensifying oceanic cyclones, hurricanes and typhoons, (2) the dynamic and thermodynamic processes associated with the development of narrow cold frontal rainbands, (3) regional climate and water cycles, (4) the impact of vertical transport by clouds and lightning on trace gas distributiodproduction associated with South and North American mesoscale convective systems, (5) the development of a westerly wind burst (WWB) that occurred during the TOGA COARE and the diurnal variation of precipitation in the tropics, (6) a Florida sea breeze convective event and a Mid-US flood event using a sophisticated land surface model, (7) the influence of soil heterogeneity on land surface energy balance in the southwest GCIP region, (8) explicit simulations (with 1.33 to 4 km horizontal resolution) of hurricanes Bob (1991) and Bonnie (1998), (9) a heavy precipitation event over Taiwan, and (10) to make real time forecasts for a major NASA field program. In this paper, the modifications and simulated cases will be described and discussed.

Tao, W.-K.↗

Slat Noise Control Using a Slat Gap Filler

The leading edge slat of a high-lift system is one of the main noise contributors on many commercial aircraft during approach. This paper continues our previous studies on the gap filler for passive noise control on the 30P30N high-lift airfoil. An improved implementation of the gap filler was applied to minimize the effects of flow leakage encountered in the previous work, which resulted in spurious noise content in the far-field acoustic spectra. To evaluate the effect of passive flow control on the acoustics generated by the unsteady flow field, anechoic wind tunnel experiments are conducted on the two-dimensional, three-element high-lift airfoil with a gap filler mounted to the slat. The slat geometry modification associated with the gap filler alters the flow field in the cove region that dominates the generation of the acoustic field. A single angle of attack (훼푘=8◦) and three flow speeds corresponding to Reynolds numbersof푅푒푐=1.2푒6,1.5푒6, and1.71푒6are selected as the test conditions. Steady surface pressure measurements are conducted to assess the effect of the treatments on the overall lift. Acoustic array measurements are used to evaluate the influence of the gap filler on the radiated noise. Delay and Sum beamforming is applied to locate the noise sources on the model and to provide the integrated spectra. The gap filler is found to eliminate the narrowband peaks in the acoustic spectra and, also, to yield a 10 dB reduction in the broadband noise in comparison with the baseline case. Time-resolved Particle Image Velocimetry results show that the flow features are significantly altered with the presence of the gap filler, which leads to a more stable slat cove shear layer and, thus, to weaker pressure and velocity fluctuations.

Yang Zhang↗

Comparison of Monthly Mean Cloud Fraction and Cloud Optical depth Determined from Surface Cloud Radar, TOVS, AVHRR, and MODIS over Barrow, Alaska

A one year comparison is made of mean monthly values of cloud fraction and cloud optical depth over Barrow, Alaska (71 deg 19.378 min North, 156 deg 36.934 min West) between 35 GHz radar-based retrievals, the TOVS Pathfinder Path-P product, the AVHRR APP-X product, and a MODIS based cloud retrieval product from the CERES-Team. The data sets represent largely disparate spatial and temporal scales, however, in this paper, the focus is to provide a preliminary analysis of how the mean monthly values derived from these different data sets compare, and determine how they can best be used separately, and in combination to provide reliable estimates of long-term trends of changing cloud properties. The radar and satellite data sets described here incorporate Arctic specific modifications that account for cloud detection challenges specific to the Arctic environment. The year 2000 was chosen for this initial comparison because the cloud radar data was particularly continuous and reliable that year, and all of the satellite retrievals of interest were also available for the year 2000. Cloud fraction was chosen as a comparison variable as accurate detection of cloud is the primary product that is necessary for any other cloud property retrievals. Cloud optical depth was additionally selected as it is likely the single cloud property that is most closely correlated to cloud influences on surface radiation budgets.

Uttal, Taneil↗

Solar Signals in CMIP-5 Simulations: The Stratospheric Pathway

The 11 year solar-cycle component of climate variability is assessed in historical simulations of models taken from the Coupled Model Intercomparison Project, phase 5 (CMIP-5). Multiple linear regression is applied to estimate the zonal temperature, wind and annular mode responses to a typical solar cycle, with a focus on both the stratosphere and the stratospheric influence on the surface over the period approximately 1850-2005. The analysis is performed on all CMIP-5 models but focuses on the 13 CMIP-5 models that resolve the stratosphere (high-top models) and compares the simulated solar cycle signature with reanalysis data. The 11 year solar cycle component of climate variability is found to be weaker in terms of magnitude and latitudinal gradient around the stratopause in the models than in the reanalysis. The peak in temperature in the lower equatorial stratosphere (approximately 70 hPa) reported in some studies is found in the models to depend on the length of the analysis period, with the last 30 years yielding the strongest response. A modification of the Polar Jet Oscillation (PJO) in response to the 11 year solar cycle is not robust across all models, but is more apparent in models with high spectral resolution in the short-wave region. The PJO evolution is slower in these models, leading to a stronger response during February, whereas observations indicate it to be weaker. In early winter, the magnitude of the modeled response is more consistent with observations when only data from 1979-2005 are considered. The observed North Pacific high-pressure surface response during the solar maximum is only simulated in some models, for which there are no distinguishing model characteristics. The lagged North Atlantic surface response is reproduced in both high- and low-top models, but is more prevalent in the former. In both cases, the magnitude of the response is generally lower than in observations.

stratosphere↗

Epitaxial Growth of 2D Core‐Crown SnS 2 /SnSe 2 Heterostructure Through Interfacial Modification with Polyvinylpyrrolidone

Abstract Developing generalized strategies for controlled synthesis of 2D heterostructures remains a significant challenge because the existing approaches often suffer from poor reproducibility and scalability. In this study, a solution synthesis approach for epitaxial core‐crown heterostructures with controlled band alignment, that overcomes these challenges is reported. Polyvinylpyrrolidone (PVP) is used as a structure‐directing agent to reduce lattice mismatch between SnS 2 and SnSe 2 (10‐10) surfaces and direct epitaxial growth of SnSe 2 crown on SnS 2 seed. Additionally, PVP adsorption to the basal plane prevents van der Waals stacking and stabilizes 2D heterostructures during synthesis. Driven by interfacial thermodynamics, the formation of the core‐crown heterostructure is highly reproducible and the size of the 2D heterostructure and relative areas of the core and the crown can be precisely controlled in a two‐step process by varying synthesis times for the seed and the crown. The identified growth pathway for 2D heterostructures can be generalized to other combinations of van der Waals materials to provide a platform for synthesizing micron‐size epitaxial heterostructures with a desired electronic structure for catalysis and microelectronics.

Liu, Lili [Physical and Computational Sciences Dir↗

C-shaped specimen plane strain fracture toughness tests

Test equipment, procedures, and data obtained in the evaluation of C-shaped specimens are presented. Observations reported on include: specimen preparation and dimensional measurement; modifications to the standard ASTM E 399 displacement gage, which permit punch mark gage point engagement; and a measurement device for determining the interior and exterior radii of ring segments. Load displacement ratios were determined experimentally which agreed with analytically determined coefficients for three different gage lengths on the inner surfaces of radially-cracked ring segments.

Buzzard, R. T.↗

Phenomenological study of subsonic turbulent flow over a swept rearward-facing step

The phenomenology of turbulent, subsonic flow over a swept, rearward-facing step was studied. Effects of variations in step height, sweep angle, base geometry, and end conditions on the 3-D separated flow were examined. The separated flow was visualized using smoke wire, oil drop, and surface tuft techniques. Measurements include surface pressure, reattachment distance and swirl angle. Results indicate: (1) model/test section coupling affects the structure of the separated flow, but spanwise end conditions do not; (2) the independence principle is evidently valid for sweep angles up to 38 deg; (3) a sweep angle/swirl angle correlation exists; and (4) base modifications can significantly reduce the reattachment distance.

Selby, G. V.↗

An intense, quasi-steady thunderstorm over mountainous terrain. I - Evolution of the storm-initiating mesoscale circulation

The evolution of mesoscale systems that eventually lead to the formation of large quasi-steady storm systems is investigated. The morphological and turbulent structure of the quasi-steady storm is described. Data obtained during the South Park Area Cumulus Experiment from surface meteorological stations, rawinsondes and tethered balloons, conventional and Doppler radars, powered aircraft, and satellites, indicate that on July 19, 1977, a north-south oriented line of intense convective cells formed and remained within South Park. Elevated surface heating created a region of low-level convergence, importing Pacific moisture from west of the Rockies. The mesoscale thunderstorm line formed over this convergence zone, and a single large convective cell was observed to grow on the southern end of the mesoscale line, exhibiting supercell characteristics and substantial modifications of the environmental flow.

Cotton, W. R.↗

LEED and AES characterization of the GaAs(110)-ZnSe interface

In this paper, a study is conducted of the composition and structure of epitaxial ZnSe films grown by congruent evaporation on GaAs(110) at a rate of 2 A/min. It is found that the films grown on 300 C GaAs are nearly stoichiometric and form an abrupt interface with the substrate. Films grown at higher temperature (T greater than 350-400 C) are Se rich. The crystallinity of films grown at 300 C is good and their surface atomic geometry is identical to that of a ZnSe crystal. The GaAs-ZnSe interface geometry seems to be dominated by the Se-substrate bonds. The adsorption of Se, during the formation of very thin ZnSe films (2-3 A), produces a (1 x 2) LEED pattern and modifications of the LEED I-V profiles, which probably indicate a change in the substrate atomic relaxation.

Tu, D.-W.↗

Image processing software for imaging spectrometry data analysis

Imaging spectrometers simultaneously collect image data in hundreds of spectral channels, from the near-UV to the IR, and can thereby provide direct surface materials identification by means resembling laboratory reflectance spectroscopy. Attention is presently given to a software system, the Spectral Analysis Manager (SPAM) for the analysis of imaging spectrometer data. SPAM requires only modest computational resources and is composed of one main routine and a set of subroutine libraries. Additions and modifications are relatively easy, and special-purpose algorithms have been incorporated that are tailored to geological applications.

Mazer, Alan↗