SEARCH · Engineering Papers

Results for “structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Synthesis and Crystal Structure of the Zintl Phases Na2CaCdSb2, Na2SrCdSb2 and Na2EuCdSb2

This work details the synthesis and the crystal structures of the quaternary Zintl phases Na2CaCdSb2, Na2SrCdSb2 and Na2EuCdSb2. They are isostructural and their noncentrosymmetric structure is with the space group Pmc21 (Pearson code oP12). All structural work is carried out via single-crystal X-ray diffraction methods. The structure features [CdSb2]4– layers of corner-shared CdSb4 tetrahedra, which are stacked along the b-crystallographic axis and are separated by cations. The results from the structure refinements suggest that in addition to full cation ordering, which is typical for this structure, there also exists a possibility for an accommodation of a small degree of cation disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1966

Design of thick honeycomb core structures

The demand for weight reduction in flight vehicles suggests the use of lightweight sandwich structures. Several factors must be considered to obtain minimum-weight sandwich constructions. High-strength thin facings combined with lightweight thick core can offer a highly efficient structure when careful consideration is given to practical proportions between facings and core, edge design details, and manufacturing techniques. This paper discusses design approaches to relatively thick-core sandwich constructions. 'A large cylindrical structure subjected to axial compression loading and panel-type structures requiring low deflection under transverse loads are briefly analyzed. The selection of structural adhesives for thick-core structures and manufacturing considerations also are discussed.

SANDWICH CONSTRUCTION↗

NASA NTRS1994

Three-dimensional structure of Schistosoma japonicum glutathione S-transferase fused with a six-amino acid conserved neutralizing epitope of gp41 from HIV

The 3-dimensional crystal structure of glutathione S-transferase (GST) of Schistosoma japonicum (Sj) fused with a conserved neutralizing epitope on gp41 (glycoprotein, 41 kDa) of human immunodeficiency virus type 1 (HIV-1) (Muster T et al., 1993, J Virol 67:6642-6647) was determined at 2.5 A resolution. The structure of the 3-3 isozyme rat GST of the mu gene class (Ji X, Zhang P, Armstrong RN, Gilliland GL, 1992, Biochemistry 31:10169-10184) was used as a molecular replacement model. The structure consists of a 4-stranded beta-sheet and 3 alpha-helices in domain 1 and 5 alpha-helices in domain 2. The space group of the Sj GST crystal is P4(3)2(1)2, with unit cell dimensions of a = b = 94.7 A, and c = 58.1 A. The crystal has 1 GST monomer per asymmetric unit, and 2 monomers that form an active dimer are related by crystallographic 2-fold symmetry. In the binding site, the ordered structure of reduced glutathione is observed. The gp41 peptide (Glu-Leu-Asp-Lys-Trp-Ala) fused to the C-terminus of Sj GST forms a loop stabilized by symmetry-related GSTs. The Sj GST structure is compared with previously determined GST structures of mammalian gene classes mu, alpha, and pi. Conserved amino acid residues among the 4 GSTs that are important for hydrophobic and hydrophilic interactions for dimer association and glutathione binding are discussed.

Schistosoma japonicum/enzymology/genetics/immunolo↗

NASA NTRS2006

Surface Control of Cold Hibernated Elastic Memory Self-Deployable Structure

A new class of simple, reliable, lightweight, low packaging volume and cost, self-deployable structures has been developed for use in space and commercial applications. This technology called 'cold hibernated elastic memory' (CHEM) utilizes shape memory polymers (SMP)in open cellular (foam) structure or sandwich structures made of shape memory polymer foam cores and polymeric composite skins. Some of many potential CHEM space applications require a high precision deployment and surface accuracy during operation. However, a CHEM structure could be slightly distorted by the thermo-mechanical processing as well as by thermal space environment Therefore, the sensor system is desirable to monitor and correct the potential surface imperfection. During these studies, the surface control of CHEM smart structures was demonstrated using a Macro-Fiber Composite (MFC) actuator developed by the NASA LaRC and US Army ARL. The test results indicate that the MFC actuator performed well before and after processing cycles. It reduced some residue compressive strain that in turn corrected very small shape distortion after each processing cycle. The integrated precision strain gages were detecting only a small flat shape imperfection indicating a good recoverability of original shape of the CHEM test structure.

glass transition temperature Tg↗

NASA NTRS2016

Banded Structures in Electron Pitch Angle Diffusion Coefficients from Resonant Wave Particle Interactions

Electron pitch angle (D (alpha)) and momentum (D(pp)) diffusion coefficients have been calculated due to resonant interactions with electrostatic electron cyclotron harmonic (ECH) and whistler mode chorus waves. Calculations have been performed at two spatial locations L = 4.6 and 6.8 for electron energies 10 keV. Landau (n = 0) resonance and cyclotron harmonic resonances n = +/-1, +/-2,...+/-5 have been included in the calculations. It is found that diffusion coefficient versus pitch angle (alpha) profiles show large dips and oscillations or banded structures. The structures are more pronounced for ECH and lower band chorus (LBC) and particularly at location 4.6. Calculations of diffusion coefficients have also been performed for individual resonances. It is noticed that the main contribution of ECH waves in pitch angle diffusion coefficient is due to resonances n = +1 and n = +2. A major contribution to momentum diffusion coefficients appears from n = +2. However, the banded structures in D alpha and Dpp coefficients appear only in the profile of diffusion coefficients for n = +2. The contribution of other resonances to diffusion coefficients is found to be, in general, quite small or even negligible. For LBC and upper band chorus waves, the banded structures appear only in Landau resonance. The Dpp diffusion coefficient for ECH waves is one to two orders smaller than D alpha coefficients. For chorus waves, Dpp coefficients are about an order of magnitude smaller than D alpha coefficients for the case n does not = 0. In case of Landau resonance, the values of Dpp coefficient are generally larger than the values of D alpha coefficients particularly at lower energies. As an aid to the interpretation of results, we have also determined the resonant frequencies. For ECH waves, resonant frequencies have been estimated for wave normal angle 89 deg and harmonic resonances n = +1, +2, and +3, whereas for whistler mode waves, the frequencies have been calculated for angle 10 deg and Landau resonance. Further, in ECH waves, the banded structures appear for electron energies (is) greater than1 keV, and for whistler mode chorus waves, structures appear for energies greater than 2 keV at L = 4.6 and above 200 eV for L = 6.8. The results obtained in the present work will be helpful in the study of diffusion curves and will have important consequences for diffuse aurora and pancake distributions.

diffusion↗

NASA NTRS1993

(abstract) Overview of NASA's Adaptive Structures Program

NASA's research program in Adaptive Structures was initiated seven years ago to provide the technology required for large (20-50 meters in dimension) precision (submicron) structures for observations from space. The current approach of designing thermally stable passive structures cannot meet the requirements and moreover the systems cannot be validated by ground tests. Adaptive Structures provides the capability to adjust the quasistatic dimensions of the structures, preload joints, add active damping, and provide the actuation forces necessary to attenuate the undesired dynamic motions. The technology is applicable to space platforms with various pointing instruments as well as for microspacecraft. This technology has been incorporated as part of a small Active Fold Mirror on the Wide Field Planetary Camera to be flown within the year to correct the optical errors in the Hubble Telescope. Highlights of NASA's Adaptive Structures research and applications will be presented along with future technology and research requirements for both small inexpensive spacecraft and large precision systems.

adaptive↗

NASA NTRS2021

Compression After Impact Strength Comparison of Rohacell Foam and Aluminum Honeycomb Core Sandwich Structure

This Technical Memorandum is a follow-on study to a previous one1 that examined the compression after impact (CAI) strength of carbon fiber sandwich structure with aluminum honeycomb core and Rohacell foam core with barely visible impact damage (BVID). In this current study a wider range of impact energies were utilized and the CAI strength assessed with these different damage severity levels. This was done to provide a more complete database for the two types of sandwich structure tested in these studies. In addition, the honeycomb sandwich specimens were tested with both the ‘L’ and ‘W’ directions aligned with the axis of compression loading. As in the study examining CAI strength with BVID1, the results were normalized by the mass of the sandwich structure. The results showed that the CAI strength did differ depending on the orientation of the core during testing and that when tested in the W-direction, the honeycomb core sandwich structure had about the same CAI strength as the foam core sandwich structure when normalized by the mass of the sandwich structures.

Sandwich Structure↗

NASA NTRSDate not supplied

Structural Requirements for Design and Analysis of 25% Scale Subsonic Single Aft Engine (SUSAN) Research Aircraft

The purpose of this paper is to define a set of structural requirements which can be used for conceptual design studies of the Subsonic Single Aft eNgine (SUSAN) aircraft and the early design phases of a quarter scale flight research aircraft. SUSAN presents an architecture for a subsonic regional jet transport aircraft coupling a single turbofan engine to an electrified aircraft propulsion system (EAP). Presented within this paper are a consolidated set of requirements drawn from NASA, FAA (FAR), and non-government structural standards with a focus on loads. An example application of the breakout load tables and the approach for applying existing standards to those configurations is presented for the SUSAN 25% flight research vehicle. Positioning of the turbofan, electric engines, battery and the requirement for the 25% vehicle to be shippable in a cargo box are atypical structural design requirements. Particular focus is given to the primary aircraft structural elements such as the engine/tail mount, fuselage structure, and wing structure.

structures↗

NASA NTRSDate not supplied

Structural Requirements for Design and Analysis of 25% Scale Subsonic Single Aft Engine (SUSAN) Research Aircraft

Structures↗

DOE OSTI2025

Optimizing Grain Boundary Structures with LAMMPS Using Evolutionary Algorithms

Grain boundary structure optimization is an important part of materials modeling. Current methods for grain boundary structure optimization involve inefficient, time-consuming processes that do not fully explore the interface parameter space. Evolutionary algorithms have recently been demonstrated to be effective at determining both stable and metastable grain boundary interface structures. In this work, we demonstrate the use of GBOpt, a grain boundary structure optimization software designed to use the Large-scale Atomic/Molecular Massively Parallel Simulation (LAMMPS) software to efficiently determine grain boundary structures. We demonstrate that a only a few manipulations, namely atom insertion, atom removal, and relative grain displacement, are sufficient to explore much of the grain boundary structure parameter space. The efficacy of this approach is demonstrated on an FCC Ni system, and a BCC Fe system. The computational cost is compared against the gamma-surface sampling approach to demonstrate performance improvement.

Evolutionary algorithms↗

DOE OSTI2021

Complex Dirac-like Electronic Structure in Atomic Site-Ordered Rh 3 In 3.4 Ge 3.6

We report the synthesis via an indium flux method of a novel single-crystalline compound Rh 3 In 3.4 Ge 3.6 that belongs to the cubic Ir 3 Ge 7 structure type. In Rh 3 In 3.4 Ge 3.6 , the In and Ge atoms preferentially occupy, respectively, the 12d and 16f sites of the Im3¯m space group, thus creating a colored variant of the Ir 3 Ge 7 structure. Like the other compounds of the Ir 3 Ge 7 family, Rh 3 In 3.4 Ge 3.6 shows potential as a thermoelectric, displaying a relatively large power factor, PF ~ 2 mW/cm K 2 , at a temperature T ~ 225 K, albeit showing a modest figure of merit, ZT = 8 x 10 -4 , because of the lack of a finite band gap. These figures might improve through a use of chemical substitution strategies to achieve band gap opening. Remarkably, electronic band structure calculations reveal that this compound displays a complex Dirac-like electronic structure relatively close to the Fermi level. The electronic structure is composed of several Dirac type-I and type-II nodes, and even Dirac type-III nodes that result from the touching between a flat band and a linearly dispersing band. Here, this rich Dirac-like electronic dispersion suggests the possibility to observe experimentally Dirac type-III nodes and study their role in the physical properties of Rh 3 In 3.4 Ge 3.6 and related Ir 3 Ge 7 -type materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Finite-Temperature Structures of Supported Subnanometer Catalysts Inferred via Statistical Learning and Genetic Algorithm-Based Optimization

Single-atom catalysts (SACs) minimize noble metal utilization and can alter the activity and selectivity of supported metal nanoparticles. However, the morphology of active centers, including single atoms and subnanometer clusters of a few atoms, remains elusive due to experimental challenges. The computational cost to describe numerous cluster shapes and sizes makes direct first-principles calculations impractical. We present a computational framework to enable structure determination for single-atom and subnanometer cluster catalysts. As a case study, we obtained the low energy structures of Pd n (n = 1-21) clusters supported on CeO 2 (111), which are critical components of automobile three-way catalysts. Trained on density functional theory data, a three-dimensional cluster expansion is established using statistical learning to describe the Hamiltonian and predict energies of supported Pdn clusters of any structure. Low energy stable and metastable structures are identified using a Metropolis Monte Carlo-based genetic algorithm in the canonical ensemble at 300 K. We observe that supported single atoms sinter to form bilayer clusters and large cluster isomers share similarities in both shape and energy, and elucidate the significance of the support and microstructure on cluster stability. We discovered a simple surrogate structure-energy model, where the energy per atom scales with the square root of the average first coordination number, which can be used to estimate energies and compare the stability of clusters. Our framework, applicable to any metal/support system, fills an important methodological gap to predict the stability of supported metal catalysts in the subnanometer regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2004

Co-axial Joint Technology Applied to Antenna Backup Structures

The increasing demand to improve focusing accuracy and to accommodate higher frequencies in space communications and radio astronomy has created significant challenges for improving the capability of the constituent systems in radio antennas and telescopes. One important system is the radio antenna/telescope backup structure connections. The backup structure is a key element in providing a stable, precise and rigid support for the reflective surface. The ideal connection for these types of structures is rigid and concentric resulting in minimal deformation with stress/strain curves that are linear, repeatable and exhibiting no hysteresis over the entire service load range. Conceivably such a connection could be designed so that the stress/strain curve mimics the stress/strain characteristics of the connecting member in both tension and compression. When this is achieved then such joints can be said to be 'invisible' in the global behavior of the backup structure. At that point, overall reflector deflection becomes more linear and highly predictable. In conjunction with this advantage, optimized backup structure geometries, adaptive reflectors and compensating algorithms can best be applied in producing an instrument of unparalleled performance. This paper introduces Co-Axial Joint (CAJ) technology as the practical and economical means to produce an invisible connection.

trusses↗

DOE OSTI2020

Time-Resolved Structural Kinetics of an Organic Mixed Ionic–Electronic Conductor

The structure and packing of organic mixed ionic–electronic conductors have an especially significant effect on transport properties. In operating devices, this structure is not fixed but is responsive to changes in electrochemical potential, ion intercalation, and solvent swelling. Toward this end, the steady-state and transient structure of the model organic mixed conductor, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), is characterized using multimodal time-resolved operando techniques. Steady-state operando X-ray scattering reveals a doping-induced lamellar expansion of 1.6 Å followed by 0.4 Å relaxation at high doping levels. Time-resolved operando X-ray scattering reveals asymmetric rates of lamellar structural change during doping and dedoping that do not directly depend on potential or charging transients. Further, time-resolved spectroscopy establishes a link between structural transients and the complex kinetics of electronic charge carrier subpopulations, in particular the polaron–bipolaron equilibrium. These findings provide insight into the factors limiting the response time of organic mixed-conductor-based devices, and present the first real-time observation of the structural changes during doping and dedoping of a conjugated polymer system via X-ray scattering.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Kirigami Engineering—Nanoscale Structures Exhibiting a Range of Controllable 3D Configurations

Abstract Kirigami structures provide a promising approach to transform flat films into 3D complex structures that are difficult to achieve by conventional fabrication approaches. By designing the cutting geometry, it is shown that distinct buckling‐induced out‐of‐plane configurations can be obtained, separated by a sharp transition characterized by a critical geometric dimension of the structures. In situ electron microscopy experiments reveal the effect of the ratio between the in‐plane cut size and film thickness on out‐of‐plane configurations. Moreover, geometrically nonlinear finite element analyses (FEA) accurately predict the out‐of‐plane modes measured experimentally, their transition as a function of cut geometry, and provide the stress–strain response of the kirigami structures. The combined computational–experimental approach and results reported here represent a step forward in the characterization of thin films experiencing buckling‐induced out‐of‐plane shape transformations and provide a path to control 3D configurations of micro‐ and nanoscale buckling‐induced kirigami structures. The out‐of‐plane configurations promise great utility in the creation of micro‐ and nanoscale systems that can harness such structural behavior, such as optical scanning micromirrors, novel actuators, and nanorobotics. This work is of particular significance as the kirigami dimensions approach the sub‐micrometer scale which is challenging to achieve with conventional micro‐electromechanical system technologies.

Zhang, Xu↗

DOE OSTI2025

On the Structure–Property Relationship of Semi‐Coherent FeCr 2 O 4 /Cr 2 O 3 Spinel/Corundum Interfaces

Abstract Oxide heterointerfaces are extremely common in both natural and artificial composite structures, including corroded structural materials. Often, key properties such as segregation and atomic transport are dictated by the structure of these interfaces. However, despite this critical link, very few heterointerfaces have been studied in any detail at the atomic scale. Here, one important oxide heterointerface is examined, between spinel and corundum, using the chemical system FeCr 2 O 4 /Cr 2 O 3 as a representative and technologically important case. Using atomistic simulation techniques, it is found that the structure, particularly the local chemistry, of the interface depends on the crystal chemistry at the interface. This atomic and chemical structure further impacts important properties such as defect segregation and mass transport. It is found that defects can nucleate at some regions of these interfaces and migrate back and forth across the corundum layer, suggesting high atomic mobility that may be important for the evolution of spinel/corundum composite structures in extreme conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Sequence-defined Pareto frontier of a copolymer structure

The correlations between the sequence of monomers in a macromolecule and its three-dimensional (3D) structure is a grand challenge in polymer science. The properties and functions of macromolecules depend on their 3D shape that has appeared to be dictated by their monomer sequence. However, the progress towards understanding the sequence–structure-property correlations and their utilization in materials engineering are slow because it is almost impossible to characterize an astronomically large number of possible sequences of a copolymer using traditional experimental and simulation methods. To address this problem, here, we combine evolutionary computing and coarse-grained molecular dynamics (CGMD) simulation and study the sequence-structure correlations of a model AB-type copolymer in a solution and assess the impact of sequence on the packing density in its bulk phase. The CGMD-based evolutionary algorithm (EA) screens the sequence space of a single chain copolymer efficiently and identifies a wide range of single-molecule structures including extremal radii of gyration. The data are utilized to estimate the Pareto front of the structure-space of a binary copolymer as a function of its composition. The monomer packings in single-molecule solution phase and multimolecular bulk phase are found to be identical. Finally, this work highlights the opportunities of sequence-specific control of macromolecular structure for designing target materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Structural studies of intrinsically disordered MLL -fusion protein AF9 in complex with peptidomimetic inhibitors

AF9 (MLLT3) and its paralog ENL(MLLT1) are members of the YEATS family of proteins with important role in transcriptional and epigenetic regulatory complexes. These proteins are two common MLL fusion partners in MLL -rearranged leukemias. The oncofusion proteins MLL-AF9/ENL recruit multiple binding partners, including the histone methyltransferase DOT1L, leading to aberrant transcriptional activation and enhancing the expression of a characteristic set of genes that drive leukemogenesis. The interaction between AF9 and DOT1L is mediated by an intrinsically disordered C-terminal ANC1 homology domain (AHD) in AF9, which undergoes folding upon binding of DOT1L and other partner proteins. We have recently reported peptidomimetics that disrupt the recruitment of DOT1L by AF9 and ENL, providing a proof-of-concept for targeting AHD and assessing its druggability. Intrinsically disordered proteins, such as AF9 AHD, are difficult to study and characterize experimentally on a structural level. In this study, we present a successful protein engineering strategy to facilitate structural investigation of the intrinsically disordered AF9 AHD domain in complex with peptidomimetic inhibitors by using maltose binding protein (MBP) as a crystallization chaperone connected with linkers of varying flexibility and length. The strategic incorporation of disulfide bonds provided diffraction-quality crystals of the two disulfide-bridged MBP–AF9 AHD fusion proteins in complex with the peptidomimetics. These successfully determined first series of 2.1–2.6 Å crystal complex structures provide high-resolution insights into the interactions between AHD and its inhibitors, shedding light on the role of AHD in recruiting various binding partner proteins. We show that the overall complex structures closely resemble the reported NMR structure of AF9 AHD/DOT1L with notable difference in the conformation of the β-hairpin region, stabilized through conserved hydrogen bonds network. These first series of AF9 AHD/peptidomimetics complex structures are providing insights of the protein–inhibitor interactions and will facilitate further development of novel inhibitors targeting the AF9/ENL AHD domain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗