Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spin dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Grain Boundary Engineering for Achieving High Thermoelectric Performance in n-Type Skutterudites

Grain or phase boundaries play a critical role in the carrier and phonon transport in bulk thermoelectric materials. Previous investigations about controlling boundaries primarily focused on the reducing grain size or forming nanoinclusions. Herein, liquid phase compaction method is first used to fabricate the Yb–filled CoSb 3 with excess Sb content, which shows the typical feature of low–angle grain boundaries with dense dislocation arrays. Seebeck coefficients show a dramatic increase via energy filtering effect through dislocation arrays with little deterioration on the carrier mobility, which significantly enhances the power factor over a broad temperature range with a high room–temperature value around 47 μW cm –2 K –1 . Simultaneously, the lattice thermal conductivity could be further suppressed via scattering phonons via dense dislocation scattering. As a result, the highest average figure of merit ZT of ≈1.08 from 300 to 850 K could be realized, comparable to the best reported result of single or triple–filled Skutterudites. Furthermore, this work clearly points out that low–angle grain boundaries fabricated by liquid phase compaction method could concurrently optimize the electrical and thermal transport properties leading to an obvious enhancement of both power factor and ZT .

36 MATERIALS SCIENCE↗

Engineering the Thermoelectric Transport in Half-Heusler Materials through a Bottom-Up Nanostructure Synthesis

Half-Heusler (HH) alloys are among the best promising thermoelectric (TE) materials applicable for the middle-to-high temperature power generation. Despite of the large thermoelectric power factor and decent figure-of-merit ZT (≈1), their broad applications and enhancement on TE performance are limited by the high intrinsic lattice thermal conductivity (κ L ) due to insufficiencies of phonon scattering mechanisms, and the fewer powerful strategies associated with the microstructural engineering for HH materials. This study reports a bottom-up nanostructure synthesis approach for these HH materials based on the displacement reaction between metal chlorides/bromides and magnesium (or lithium), followed by vacuum-assisted spark plasma sintering process. The samples are featured with dense dislocation arrays at the grain boundaries, leading to a minimum κ L of ≈1 W m -1 K -1 at 900 K and one of the highest ZT (≈1) and predicted η (≈11%) for n-type Hf 0.25 Zr 0.75 NiSn 0.97 Sb 0.03 . Further manipulation on the dislocation defects at the grain boundaries of p-type Nb 0.8 Ti 0.2 FeSb leads to enhanced maximum power factor of 47 × 10 -4 W m -1 K -2 and the predicted η of ≈7.5%. Moreover, vanadium substitution in FeNb 0.56 V 0.24 Ti 0.2 Sb significantly promotes the η to ≈11%. This strategy can be extended to a broad range of advanced alloys and compounds for improved properties.

36 MATERIALS SCIENCE↗

Temperature Dependent n-Type Self Doping in Nominally 19-Electron Half-Heusler Thermoelectric Materials

The discovery of a semiconducting ground state X y YZ (y = 0.8 or 0.75) in nominally 19-electron half-Heusler materials warrants a closer look at their apparently metallic properties that often make them good thermoelectric (TE) materials. Here, by systematically investigating the temperature dependence of off-stoichiometry (x) in V 0.8+x CoSb, Nb 0.8+x CoSb, and Ti 0.75+x NiSb it is found that x invariably increases with increasing temperature, leading to an n-type self-doping behavior. In addition, there is also a large phase width (range of x) associated with each phase that is temperature dependent. Thus, unlike in typical 18-electron half-Heuslers (e,g, TiNiSn), the temperature dependence of vacancy and carrier concentration (n) in nominally 19-electron half-Heuslers links its transport properties to synthesis conditions. The temperature dependence of x and n are understood using density functional theory based defect energies (E d ) and phase diagrams. E d are calculated for 21 systems which can be used in predicting solubility in this family of compounds. Using this simple strategy, suitable composition and temperature synthesis conditions are devised for obtaining an optimized n to engineer TE properties in phase-pure V 0.8+x CoSb, and the previously unexplored Ta 0.8+x CoSb.

19-electron half-Heuslers↗

High Thermoelectric Performance of New Rhombohedral Phase of GeSe stabilized through Alloying with AgSbSe 2

GeSe is a IV–VI semiconductor, like the excellent thermoelectric materials PbTe and SnSe. Orthorhombic GeSe has been predicted theoretically to have good thermoelectric performance but is difficult to dope experimentally. Like PbTe, rhombohedral GeTe has a multivalley band structure, which is ideal for thermoelectrics and also promotes the formation of Ge vacancies to provide enough carriers for electrical transport. Herein, we investigate the thermoelectric properties of GeSe alloyed with AgSbSe 2 , which stabilizes a new rhombohedral structure with higher symmetry that leads to a multivalley Fermi surface and a dramatic increase in carrier concentration. The z T of GeAg 0.2 Sb 0.2 Se 1.4 reaches 0.86 at 710 K, which is 18 times higher than that of pristine GeSe and over four times higher than doped orthorhombic GeSe. Our results open a new avenue towards developing novel thermoelectric materials through crystal phase engineering using a strategy of entropy stabilization of high-symmetry alloys.

36 MATERIALS SCIENCE↗

Thinking Like a Chemist: Intuition in Thermoelectric Materials

Abstract The coupled transport properties required to create an efficient thermoelectric material necessitates a thorough understanding of the relationship between the chemistry and physics in a solid. We approach thermoelectric material design using the chemical intuition provided by molecular orbital diagrams, tight binding theory, and a classic understanding of bond strength. Concepts such as electronegativity, band width, orbital overlap, bond energy, and bond length are used to explain trends in electronic properties such as the magnitude and temperature dependence of band gap, carrier effective mass, and band degeneracy and convergence. The lattice thermal conductivity is discussed in relation to the crystal structure and bond strength, with emphasis on the importance of bond length. We provide an overview of how symmetry and bonding strength affect electron and phonon transport in solids, and how altering these properties may be used in strategies to improve thermoelectric performance.

Zeier, Wolfgang G.↗

Highly Porous Thermoelectric Nanocomposites with Low Thermal Conductivity and High Figure of Merit from Large-Scale Solution-Synthesized Bi 2 Te 2.5 Se 0.5 Hollow Nanostructures

To enhance the performance of thermoelectric materials and enable access to their widespread applications, it is beneficial yet challenging to synthesize hollow nanostructures in large quantities, with high porosity, low thermal conductivity (κ) and excellent figure of merit ($z$T). Herein we report a scalable (ca. 11.0 g per batch) and low-temperature colloidal processing route for Bi 2 Te 2.5 Se 0.5 hollow nanostructures. They are sintered into porous, bulk nanocomposites (phi 10 mm×h 10 mm) with low κ (0.48 W m -1 K -1 ) and the highest z T (1.18) among state-of-the-art Bi 2 Te 3-x Se x materilas. Additional benefits of the unprecedented low relative density (68–77 %) are the large demand reduction of raw materials and the improved portability. This method can be adopted to fabricate other porous phase-transition and thermoelectric chalcogenide materials and will pave the way for the implementation of hollow nanostructures in other fields.

36 MATERIALS SCIENCE↗

Phonon scattering by dislocations at grain boundaries in polycrystalline Bi 0.5 Sb 1.5 Te 3

Reducing lattice thermal conductivity ( κ l ) of a thermoelectric material is one of the most popular strategies to improve its thermoelectric performance. Particularly, many efforts have been focused on decreasing grain size to effectively scatter low‐frequency phonons by boundary scattering. In addition to the boundary scattering, we have recently demonstrated that dense arrays of dislocations formed in grain boundaries can further reduce the κ l by dislocation scattering at room temperature and above. In order to closely examine the effect of the dislocation scattering, the κ l of polycrystalline Bi 0.5 Sb 1.5 Te 3 samples with and without dislocations were measured at low temperature ( T < 200 K). Because other phonon scattering mechanisms like Umklapp and point‐defect scatterings are not dominant at low temperature, we clearly show the presence of the dislocation scattering in the sample with the dislocations by successfully describing its low temperature experimental κ l with a theoretical model.

Kim, Hyun‐Sik↗