SEARCH · Engineering Papers

Results for “separators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Separation Monitoring with Four Types of Predictors on a Cockpit Display of Traffic Information

A clear and concise display format for use in later full mission simulator evaluation of the cockpit display of traffic information (CDTI) concept was studied. This experiment required airline pilots to monitor a CDTI and make perceptual judgments concerning the future position of a single intruder aircraft in relationship to their own aircraft (ownship). The main experimental variable was the type of predictor used to display future position of each aircraft. Predictors were referenced to the ground or to ownship and they either included turn rate information or did not. Other variables were the aircraft's separation distance when the judgment was required and the type of encounter (straight or turning). Results indicate that under these experimental conditions fewer errors were made when the predictor included turn rate information. There was little difference in overall error rate for the curved ground referenced and the ownship referenced predictors.

Jago, S.↗

NASA NTRS1981

On stellar wind accretion in widely separated X-ray binaries, and the nature of 4U0115+63

Widely separated, eccentric pulsating X-ray binaries are shown to be appropriate systems for studying the basic properties of stellar wind accretion. They are free from the complications encountered in closed binaries, where the optical star nearly fills its critical lobe (Avni, 1977). A framework of four observational tests was set up to study the characteristics of wind accretion, and to distinguish between different models of wind acceleration. The tests are applied to the source 4U0115+63, and the accretion process is discussed in both its quiescent states, and during its transient high luminosity outbursts. For the quiescent steady state, two wind profiles, determined from observational data, are compared (Barlow-Lohen, 1977; Castor et al., 1975). The difficulties encountered during the transient high states with respect to the possibility of stellar wind accretion are discussed.

Avni, Y.↗

NASA NTRS1981

Matter-antimatter separation in the early universe by rotating black holes

Consideration of the effect of rotating black holes evaporating early in the universe shows that they would have produced oppositely directed neutrino and antineutrino currents, which push matter and antimatter apart. This separation mechanism is, however, too feeble to account for a present baryon-to-photon ratio of 10 to the -9th, and has no significant observational consequences.

Leahy, D. A.↗

NASA NTRS1981

The diffuse galactic gamma radiation - The Compton contribution and component separation by energy interval and galactic coordinates

The diffuse high-energy galactic gamma radiation to be expected from cosmic ray interactions with matter and photons is considered with particular emphasis on the contribution of Compton radiation from cosmic ray electrons. The intensity, spectrum and spatial distribution of the expected galactic gamma radiation are estimated based on models of the matter, cosmic ray and photon distributions to take into account the contributions of bremsstrahlung, high-energy cosmic-ray nucleon and interstellar matter interactions as well as Compton interactions between cosmic ray electrons and background photons. Results suggest that the Compton gamma ray contribution from cosmic ray electron interactions with galactic visible and infrared photons is substantially larger than previously believed. Analysis of the energy spectra and latitude dependence of the various sources reveals that the Compton radiation, bremsstrahlung and nuclear cosmic ray-matter interaction radiation should be separable, with Compton radiation dominating at energies from 10 to 100 MeV at galactic latitudes greater than several degrees. Results demonstrate the potential of gamma ray observations in studies of galactic structure, cosmic ray electrons and galactic photon density.

Kniffen, D. A.↗

NASA NTRS1981

Quantitative separation of tetralin hydroperoxide from its decomposition products by high performance liquid chromatography

A method for the separation and analysis of tetralin hydroperoxide and its decomposition products by high pressure liquid chromatography has been developed. Elution with a single, mixed solvent from a micron-Porasil column was employed. Constant response factors (internal standard method) over large concentration ranges and reproducible retention parameters are reported.

Worstell, J. H.↗

NASA NTRS1982

Computations of transonic flow over an oscillating airfoil with shock-induced separation

A numerical study is presented on unsteady transonic flow over an airfoil in pitching oscillation at a moderately high incidence. The study was focused on the effects of unsteady shock-wave/boundary-layer interactions and subsequent flow separations. An implicit finite-difference scheme was used to solve the full time-dependent compressible Navier-Stokes equations in conservation-law form. The algorithm adopted for this study is the Beam-Warming spatially factored scheme. It is, however, constructed in a body-fitted curvilinear coordinate system for efficient unsteady flow computations. The computational results are compared with experimental data measured in the Ames 11- by 11-Foot Transonic Wind Tunnel.

Chyu, W. J.↗

NASA NTRS1981

An experimental study of separated flow on a finite wing

The flow field associated with the formation of a mushroom shaped trailing edge stall cell on a low-aspect-ratio (AR = 4.0) wing was investigated in a series of low speed wind tunnel tests (Reynolds number based on 15.2 cm chord = 480,000). Flow field surveys of the separation bubble and wake of a partially stalled and fully stalled wing were completed using a hot-wire probe, a split-film probe, and a directional sensitive pressure probe. A new color video display technique was developed to display the flow field survey data. Photographs were obtained of surface oil flow patterns and smoke flow visualization

Winkelmann, A. E.↗

NASA NTRS1982

Inexpensive cross-linked polymeric separators made from water-soluble polymers

Polyvinyl alcohol (PVA), cross-linked chemically with aldehyde reagents, produces membranes which demonstrate oxidation resistance, dimensional stability, low ionic resistivity (less than 0.8 Ohms sq cm), low zincate diffusivity (less than 1 x 10 to the -7th mols/sq cm per min), and low zinc dendrite penetration rate (greater than 350 min) which make them suitable for use as alkaline battery separators. They are intrinsically low in cost, and environmental health and safety problems associated with commercial production appear minimal. Preparation, property measurements, and cell test results in Ni/Zn and Ag/Zn cells are described and discussed.

Hsu, L.-C.↗

NASA NTRS1982

Evaluation of a wall-flow direction probe for measurements in separated flows

The upstream-downstream flow direction intermittency is an important parameter that can quantitatively describe the stages of flow separation. This paper gives an improved design for a wall-flow-direction probe. Intermittency measurements made using this modified probe show agreement within experimental uncertainties with direct measurements made using a LDV, although both the unmodified and modified probe designs produce results that are consistently higher than those for the LDV.

Shivaprasad, B. G.↗

NASA NTRS1982

Lateral aerodynamics of delta wings with leading edge separation

An unsteady vortex lattice method is presented for the calculation of the aerodynamic forces acting on lifting surfaces undergoing complex three dimensional motion. For the present case the nonsymmetric motion of a slender delta wing was considered and the resulting lateral characteristics were calculated. The flow separation line was specified along the wing leading edge and the emanating vortex sheet shape and rollup was then calculated. Numerical results are presented for the combined high angle of attack and side slip condition and for the wing constant roll and coning motions.

Katz, J.↗

NASA NTRS1982

A study comparing several isocyanate and isothiocyanate derivatives of Porasil C for the separation of lower hydrocarbons by GC

Several isocyanate and isothiocyanate derivatives of Porasil C were synthesized and evaluated for the separation of the low-molecular-weight saturated and unsaturated hydrocarbons. It was shown that different functional groups significantly affect the retention behavior of the more polar unsaturated hydrocarbons, and that reproducible results can be obtained if dry carrier gas is used.

Pollock, G. E.↗

NASA NTRS1983

Improving Hydrocarbon Separation In Gas Chromatography

Modified solica spheres enhance chromatographic separation. Commercially available silica spheres are modified by reacting them with molecules containing isocyante and isothiocyanate groups. Applications of surface derivatized spheres that result from reaction include analysis of samples prouced by atmospheric or soil probes.

Pollock, G. E.↗

NASA NTRS1984

Laser-Beam Separator

Train of prisms and optical stop separate fundamental beam of laser from second and higher order harmonics of beam produced in certain crystals and by stimulated Raman scattering in gases and liquids.

Mcdermid, I. S.↗

NASA NTRS1982

Analysis of airfoil leading edge separation bubbles

A local inviscid-viscous interaction technique was developed for the analysis of low speed airfoil leading edge transitional separation bubbles. In this analysis an inverse boundary layer finite difference analysis is solved iteratively with a Cauchy integral representation of the inviscid flow which is assumed to be a linear perturbation to a known global viscous airfoil analysis. Favorable comparisons with data indicate the overall validity of the present localized interaction approach. In addition numerical tests were performed to test the sensitivity of the computed results to the mesh size, limits on the Cauchy integral, and the location of the transition region.

Carter, J. E.↗

NASA NTRS1982

A new measurement method for separating airborne and structureborne noise radiated by aircraft type panels

The theoretical basis for and experimental validation of a measurement method for separating airborne and structure borne noise radiated by aircraft type panels are presented. An extension of the two microphone, cross spectral, acoustic intensity method combined with existing theory of sound radiation of thin shell structures of various designs, is restricted to the frequency range below the coincidence frequency of the structure. Consequently, the method lends itself to low frequency noise problems such as propeller harmonics. Both an aluminum sheet and two built up aircraft panel designs (two aluminum panels with frames and stringers) with and without added damping were measured. Results indicate that the method is quick, reliable, inexpensive, and can be applied to thin shell structures of various designs.

Mcgary, M. C.↗

NASA NTRS1983

Parabolized Navier-Stokes solutions of separation and trailing-edge flows

A robust, iterative solution procedure is presented for the parabolized Navier-Stokes or higher order boundary layer equations as applied to subsonic viscous-inviscid interaction flows. The robustness of the present procedure is due, in part, to an improved algorithmic formulation. The present formulation is based on a reinterpretation of stability requirements for this class of algorithms and requires only second order accurate backward or central differences for all streamwise derivatives. Upstream influence is provided for through the algorithmic formulation and iterative sweeps in x. The primary contribution to robustness, however, is the boundary condition treatment, which imposes global constraints to control the convergence path. Discussed are successful calculations of subsonic, strong viscous-inviscid interactions, including separation. These results are consistent with Navier-Stokes solutions and triple deck theory.

Brown, J. L.↗

NASA NTRS1983

Activation parameters of flow through battery separators

Studies of the hydrodynamic flow of water and 45 percent potassium hydroxide (KOH) solution through a microporous and an ion exchange separator are described. The permeability values are interpreted in terms of a pseudoactivation process. The enthalpy of activation deltaH* and the entropy of activation deltaS* were estimated from Eyring's rate equation.

Blokhra, R. L.↗

NASA NTRS1983

Advanced inorganic separators for alkaline batteries and method of making the same

A flexible, porous battery separator includes a coating applied to a porous, flexible substrate. The coating comprises: (1) a thermoplastic rubber-based resin which is insoluble and unreactive in the alkaline electrolyte, (2) a polar organic plasticizer which is reactive with the alkaline electrolyte to produce a reaction product which contains a hydroxyl group and/or a carboxylic acid group, and (3) a mixture of polar particulate filler materials which are unreactive with the electrode. The mixture comprises at least one first filler material having a surface area of greater than 25 sq meters/gram, at last one second filler material having a surface area of 10 to 25 sq meters/gram. The volume of the mixture of filler materials is less than 45% of the total volume of the fillers and the binder. The filler surface area per gram of binder is about 20 to 60 sq meters/gram, and the amount of plasticizer is sufficient to coat each filler particle.

Sheibley, D. W.↗