Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “remote access”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Satellite range delay simulator for a matrix-switched time division multiple-access network simulator

The Systems Integration, Test, and Evaluation (SITE) facility at NASA Lewis Research Center is presently configured as a satellite-switched time division multiple access (SS-TDMA) network simulator. The purpose of SITE is to demonstrate and evaluate advanced communication satellite technologies, presently embodied by POC components developed under NASA contracts in addition to other hardware, such as ground terminals, designed and built in-house at NASA Lewis. Each ground terminal in a satellite communications system will experience a different aspect of the satellite's motion due mainly to daily tidal effects and station keeping, hence a different duration and rate of variation in the range delay. As a result of this and other effects such as local oscillator instability, each ground terminal must constantly adjust its transmit burst timing so that data bursts from separate ground terminals arrive at the satellite in their assigned time slots, preventing overlap and keeping the system in synchronism. On the receiving end, ground terminals must synchronize their local clocks using reference transmissions received through the satellite link. A feature of the SITE facility is its capability to simulate the varying propagation delays and associated Doppler frequency shifts that the ground terminals in the network have to cope with. Delay is achieved by means of two NASA Lewis designed and built range delay simulator (RDS) systems, each independently controlled locally with front panel switches or remotely by an experiment control and monitor (EC/M) computer.

Nagy, Lawrence A.↗

Satellite range delay simulator for a matrix-switched time division multiple-access network simulation system

The Systems Integration, Test, and Evaluation (SITE) facility at NASA Lewis Research Center is presently configured as a satellite-switched time division multiple access (SS-TDMA) network simulator. The purpose of SITE is to demonstrate and evaluate advanced communication satellite technologies, presently embodied by POC components developed under NASA contracts in addition to other hardware, such as ground terminals, designed and built in-house at NASA Lewis. Each ground terminal in a satellite communications system will experience a different aspect of the satellite's motion due mainly to daily tidal effects and station keeping, hence a different duration and rate of variation in the range delay. As a result of this and other effects such as local oscillator instability, each ground terminal must constantly adjust its transmit burst timing so that data bursts from separate ground terminals arrive at the satellite in their assigned time slots, preventing overlap and keeping the system in synchronism. On the receiving end, ground terminals must synchronize their local clocks using reference transmissions received through the satellite link. A feature of the SITE facility is its capability to simulate the varying propagation delays and associated Doppler frequency shifts that the ground terminals in the network have to cope with. Delay is ahcieved by means of two NASA Lewis designed and built range delay simulator (RDS) systems, each independently controlled locally with front panel switches or remotely by an experiment control and monitor (EC/M) computer.

Nagy, Lawrence A.↗

Pillars of Cloud-Based Earth Observation Science Education

Earth observation (EO) is undergoing a paradigm shift with the development of cloud-based analytical platforms supporting EO data collection and access, parallel processing, easier communication of results, and expanded accessibility. As the global community of users and the diversity of applications grow, there is a clear need for expanded educational capacity to leverage these developments and increase the impact of EO research and teaching. Drawing upon extensive conversations between educators, practitioners, and researchers, we propose three pillars that must be prioritized to prepare students, researchers, and professionals to take full advantage of the cloud-based EO paradigm and guide future growth.

97 MATHEMATICS AND COMPUTING↗

Neutronics Analysis for ITER Diagnostic Generic Upper Port Plug

This paper presents new results of neutronics analysis performed for the updated design of the ITER Diagnostic Generic Upper Port Plug (DGUPP). Such analysis is performed regularly during the development of the ITER Ports design. Neutronics analysis is an important step in support of the development of ITER components irradiated by 14 MeV neutrons generated in D-T fusion thermonuclear reactions. The neutrons are born in the ITER tokamak plasma chamber and then impinge on the surrounding blanket and port plugs, after that they diffuse through shielding material of vacuum vessel components or could stream through the diagnostic channels and assembly gaps far away from plasma up to the bio-shield and in a small amount beyond it. While ITER machine is in operation it is inaccessible, after the shut-down it is planned to provide personnel access to the Upper Port Inter-Space Structure (UP ISS) behind the Port Plug via the corridors. Neutrons activate the ITER materials and those radioactive materials emit decay gammas during the shut-down causing a Shut-Down Dose Rate (SDDR) field distributed all around the activated materials. Decay gammas could also stream through the void channels. That emphasizes the need for calculation of decay gamma transport in evaluations of SDDR, which is reflected in the use of transport - activation interface code described in Section of Computational Modelling. The assessment of radiation environment (fluxes and SDDR) at DGUPP was focused on the port back-side area of UP ISS, where personnel access is planned along the ISS maintenance corridors. Minimization of SDDR at the front part of the ISS maintenance corridors was the target value for optimization of the DGUPP shielding and analysis of related neutronics effects. Following the dose ALARA (As Low As Reasonably Achievable) principle, every possibility to reduce SDDR should be investigated, emphasizing the importance of this analysis. The challenges of such analysis are inextricably connected with the engineering complexity of the ITER machine, with integration of many diagnostics systems having channels and gaps inside the ITER ports. Those gaps result in radiation streaming and negatively affect the shielding performance of the port plugs. The computational complication is caused by the need to model precisely the ITER geometry and then to run deep penetrating radiation transport in the substantially heterogenic toroidal geometry of ITER large-size tokamak, with 30 m height and diameter of its bio-shield. The whole mass of Upper Port Plug (UPP) could be up to 25 tons and it must be very precisely positioned inside the port opening in blanket and Vacuum Vessel. Facing the engineering challenges for the assembly of DGUPP, there were proposed two Project Change Requests (PCRs) No. 439 and 709 concerning the design updates of UPP/blanket interface and its remote handling.

61 RADIATION PROTECTION AND DOSIMETRY↗

Developing a Standard for Earth Observation Data Preservation Content - A Path to Future Usability

For datasets to be usable, many pieces of information in addition to the data themselves are essential. During the active parts of the lifecycle of dataset generating projects, the needed information is usually accessible through individuals familiar with the various aspects of the projects. However, the utility of datasets tends to outlive the lives of projects, by several decades in many cases. Thus it is essential to capture all the relevant information about the datasets, data, metadata and associate knowledge that is sufficient to read, understand, interpret and reuse the datasets, while the projects are still active. The capture and preservation should be such that the data are usable when no consultation is available from the original project participants. Identification of specific categories of content through an international standard is beneficial to the user communities of the future, so that projects involving Earth observations and generating data products can consistently plan for preservation and future usability of the project outcomes. While there are existing standards that address archival and preservation in general, there are no existing international standards or specifications today to address what content should be preserved. The standard, ISO 19165-1, titled "Geographic Information - Preservation of digital data and metadata Part 1: Fundamentals" considers geographic information preservation in general. It acknowledges that "specific content items needed to preserve the full provenance and context of the data and associated metadata depend on the needs of the designated community and types of datasets (e.g., maps, remotely sensed data from satellites and airborne instruments, physical samples). Follow-up parts to this standard may be developed detailing content items appropriate to individual disciplines." NASA proposed an extension to this standard, titled "Geographic information -- Preservation of digital data and metadata -- Part 2: Content specifications for Earth observation data and derived digital products." The development of this extension is in progress with participation by an international team representing nine countries. The purpose of this paper is to introduce this standard and report on its status.

Remote Sensing; Data Systems; Open Data;↗

Laser Remote Sensing From ISS: CATS Cloud and Aerosol Level 2 Data Products (Heritage Edition)

The Cloud-Aerosol Transport System (CATS) instrument was developed at NASA's Goddard Space Flight Center (GSFC) and deployed to the International Space Station (ISS) on 10 January 2015. CATS is mounted on the Japanese Experiment Module's Exposed Facility (JEM_EF) and will provide near-continuous, altitude-resolved measurements of clouds and aerosols in the Earth's atmosphere. The CATS ISS orbit path provides a unique opportunity to capture the full diurnal cycle of cloud and aerosol development and transport, allowing for studies that are not possible with the lidar aboard the CALIPSO platform, which flies in the sun-synchronous A-Train orbit." " One of the primary science objectives of CATS is to continue the CALIPSO aerosol and cloud profile data record to provide continuity of lidar climate observations during the transition from CALIPSO to EarthCARE. To accomplish this, the CATS project at NASA's Goddard Space Flight Center (GSFC) and the CALIPSO project at NASA's Langley Research Center (LaRC) are closely collaborating to develop and deliver a full suite of CALIPSO-like level 2 data products that will be produced using the newly acquired CATS level 1B data whenever CATS is operating in science modes 1. The CALIPSO mission is now well into its ninth year of on-orbit operations, and has developed a robust set of mature and well-validated science algorithms to retrieve the spatial and optical properties of clouds and aerosols from multi-wavelength lidar backscatter signals. By leveraging both new and existing NASA technical resources, this joint effort by the CATS and CALIPSO teams will deliver validated lidar data sets to the user community at the earliest possible opportunity. The science community will have access to two sets of CATS Level 2 data products. The "Operational" data products will be produced by the GSFC CATS team utilizing the new instrument capabilities (e.g., multiple FOVs and 1064 nm depolarization), while the "Heritage" data products created using the existing CALIPSO algorithms and the CATS 532 nm channels and the total 1064 nm channel. " Below is the development of the CATS "Heritage" level 2 software and data along with some initial results with operational data."

Rodier, Sharon↗

Final Report on Community Solar Design Models for Consumer, Industry, & Utility Success

Since the inception of the first community solar program in 2006, a number of different utility, solar industry and consumer driven community solar program models have emerged across the country with varying regulatory and solar market frameworks behind them. There is little consistency in how programs are administered, participant benefits are assigned, and customers are charged for participation. Further, while it is regularly speculated that community solar programs meet the needs of customers, no such consumer research has been completed against different community solar program models. This collaborative research effort addressed three primary issues: Program design models are numerous and evolving, with varying degrees of applicability across different state policy, utility regulatory, and solar market types. The agents, transaction methods, and accruing costs and benefits are highly variable and largely built on anecdotally successful model evolution. ‘Community solar’ (shared/group solar, solar gardens, etc.) has become a catch-all concept that means different things to different stakeholders, limiting constructive program development and growth. Everything from green pricing programs to remote net metering to metering aggregation has been framed as community solar. Consumer research on individual concepts and program models has been done, but no comprehensive and comparative market research on the broader design models and attributes has been performed. SEPA’s collaborative research effort on Community Solar Design Models for Consumer, Industry, & Utility Success is premised on the principle that greater standardization of community solar models and better understanding of consumer interests are key underpinnings of increased community solar deployment. Utilizing a cross-sectional multi-stakeholder working group, as well as focus groups and surveys, webinars, targeted outreach, and other tools, this project aims to expand the community solar knowledge base, facilitate information exchange, identify opportunities for standardization and improvement, determine what consumers’ interests are and how best to message to them, promote the research results within the solar and utility industries, and advance key opportunities for strategic deployment plans for community solar. A summary of these key takeaways/lessons learned during the grant period include: Siting of system should be evaluated up-front in the process Engage stakeholders collaboratively and early to help ensure the best chance for a successful program IT/billing departments must have a seat at the design table Establish upfront target objectives with respect to residential and commercial program access levels helps ensure program success Balance trade-offs to manage utility and developer risk with customer participation carefully to optimize pricing and sizing the program offering Over the course of the 42 month grant period, SEPA and its project team conducted a series of activities all designed to accelerate the number and size of community solar programs across the country. These activities included: Community Solar Program Design Models (2 reports) – SEPA, in collaboration with its projects team, the Coalition for Community Solar Access, and over 60 administrators of actual community solar programs, developed two reports providing hard data on the developments of community solar. These reports touched on program performance, quantity and type of programs, and program design steps, among other aspects. The reports collectively received over 2000 unique downloads. Market Research Report – SEPA, in collaboration with The Shelton Group, conducted a series of national surveys and focus groups to identify what customers were looking for in a community solar offering. The resulting report, “What the Community Solar Customer Wants”, received over 1,000 unique downloads. Technical Assistance Projects – SEPA supported 8 organizations who were pursuing community solar programs. Based on this support, over 5.7 MWs of new solar capacity have been developed. Technical Assistance Case Studies – SEPA developed two case studies detailing the technical assistance work in Fremont, NE Department of Utilities and the public power arm of Minster Ohio. These two reports have received 1,002 unique downloads. Webinar – SEPA hosted two webinars on community solar which collectively received 743 participants. The webinars focused on disseminating the findings of the research conducted under this project, as well as the research conducted in separate solar market pathways projects. Community Solar Design Workshops – 120 registrants learned about the trends in community solar and participated a business case exercise to design their own programs.

14 SOLAR ENERGY↗

Benefit of Modeling the Observation Error in a Data Assimilation Framework Using Vegetation Information Obtained From Passive Based Microwave Data

A primary operational goal of the United States Department of Agriculture (USDA) is to improve foreign market access for U.S. agricultural products. A large fraction of this crop condition assessment is based on satellite imagery and ground data analysis. The baseline soil moisture estimates that are currently used for this analysis are based on output from the modified Palmer two-layer soil moisture model, updated to assimilate near-real time observations derived from the Soil Moisture Ocean Salinity (SMOS) satellite. The current data assimilation system is based on a 1-D Ensemble Kalman Filter approach, where the observation error is modeled as a function of vegetation density. This allows for offsetting errors in the soil moisture retrievals. The observation error is currently adjusted using Normalized Difference Vegetation Index (NDVI) climatology. In this paper we explore the possibility of utilizing microwave-based vegetation optical depth instead.

Vegetation↗

Model and remote-sensing-guided experimental design and hypothesis generation for monitoring snow-soil–plant interactions

In this study, we develop a machine-learning (ML)-enabled strategy for selecting hillslope-scale ecohydrological monitoring sites within snow-dominated mountainous watersheds, with a particular focus on snow-soil–plant interactions. Data layers rely on spatial data layers from both remote sensing and hydrological model simulations. Specifically, a Landsat-based foresummer drought sensitivity index is used to define the dependency of the annual peak plant productivity on the Palmer drought severity index in the early growing season. Hydrological simulations provide the spatiotemporal dynamics of near-surface soil moisture and snow depth. In this framework, a regression analysis identifies the key hydrological variables relevant to the spatial heterogeneity of drought sensitivity. We then apply unsupervised clustering to these key variables, using the Gaussian mixture model, to group hillslopes into several zones that have divergent relationships regarding soil moisture, snow dynamics, and drought sensitivity. Using the datasets collected in the East River Watershed (Crested Butte, Colorado, United States), results show that drought sensitivity is significantly correlated with model-derived soil moisture and snow-free timing over space and time. The relationship is, however, non-linear, such that the correlation decreases above a threshold elevation and in a heavy snow year due to large snowpacks, lateral flow, and soil storage limitations. Clustering is then able to define the zones that have high or low sensitivity to drought, as well as the mid-elevation regions where sensitivity is associated with the topographic aspect and net potential radiation. In addition, the algorithm identifies the most representative hillslopes with road/trail access within each zone for installing monitoring sites. Our method also aims to significantly increase the use of ML and model-simulation results to guide critical zone and watershed monitoring activities.

54 ENVIRONMENTAL SCIENCES↗

RING E3 mechanism for ubiquitin ligation to a disordered substrate visualized for human anaphase-promoting complex

For many E3 ligases, a mobile RING (Really Interesting New Gene) domain stimulates ubiquitin (Ub) transfer from a thioester-linked E2~Ub intermediate to a lysine on a remotely bound disordered substrate. One such E3 is the gigantic, multisubunit 1.2-MDa anaphase-promoting complex/cyclosome (APC), which controls cell division by ubiquitinating cell cycle regulators to drive their timely degradation. Intrinsically disordered substrates are typically recruited via their KEN-box, D-box, and/or other motifs binding to APC and a coactivator such as CDH1. On the opposite side of the APC, the dynamic catalytic core contains the cullin-like subunit APC2 and its RING partner APC11, which collaborates with the E2 UBCH10 (UBE2C) to ubiquitinate substrates. However, how dynamic RING–E2~Ub catalytic modules such as APC11–UBCH10~Ub collide with distally tethered disordered substrates remains poorly understood. In this paper, we report structural mechanisms of UBCH10 recruitment to APC CDH1 and substrate ubiquitination. Unexpectedly, in addition to binding APC11’s RING, UBCH10 is corecruited via interactions with APC2, which we visualized in a trapped complex representing an APC CDH1 –UBCH10~Ub–substrate intermediate by cryo-electron microscopy, and in isolation by X-ray crystallography. To our knowledge, this is the first structural view of APC, or any cullin–RING E3, with E2 and substrate juxtaposed, and it reveals how tripartite cullin–RING–E2 interactions establish APC’s specificity for UBCH10 and harness a flexible catalytic module to drive ubiquitination of lysines within an accessible zone. Finally, we propose that multisite interactions reduce the degrees of freedom available to dynamic RING E3–E2~Ub catalytic modules, condense the search radius for target lysines, increase the chance of active-site collision with conformationally fluctuating substrates, and enable regulation.

60 APPLIED LIFE SCIENCES↗

Portable Electron-Beam Free-Form Fabrication System

A portable electron-beam free-form fabrication (EB F3) system, now undergoing development, is intended to afford a capability for manufacturing metal parts in nearly net sizes and shapes. Although the development effort is oriented toward the eventual use of systems like this one to supply spare metal parts aboard spacecraft in flight, the basic system design could also be adapted to terrestrial applications in which there are requirements to supply spare parts on demand at locations remote from warehouses and conventional manufacturing facilities. Prior systems that have been considered for satisfying the same requirements (including prior free-form fabrication systems) are not easily portable because of their bulk and massive size. The mechanical properties of the components that such systems produce are often inferior to the mechanical properties of the corresponding original, conventionally fabricated components. In addition, the prior systems are not efficient in the utilization of energy and of feedstock. In contrast, the present developmental system is designed to be sufficiently compact and lightweight to be easily portable, to utilize both energy and material more efficiently, and to produce components that have mechanical properties approximating those of the corresponding original components. The developmental EB F3 system will include a vacuum chamber and associated vacuum pumps, an electron-beam gun and an associated power supply, a multiaxis positioning subsystem, a precise wire feeder, and an instrumentation system for monitoring and control. The electron-beam gun, positioning subsystem, and wire feeder will be located inside the vacuum chamber (see figure). The electron beam gun and the wire feeder will be mounted in fixed positions inside the domed upper portion of the vacuum chamber. The positioning subsystem and ports for the vacuum pumps will be located on a base that could be dropped down to provide full access to the interior of the chamber when not under vacuum. During operation, wire will be fed to a fixed location, entering the melted pool created by the electron beam. Heated by the electron beam, the wire will melt and fuse to either the substrate or with the previously deposited metal wire fused on top of the positioning table. Based on a computer aided design (CAD) model and controlled by a computer, the positioning subsystem

Watson, J. Kevin↗

Landslides Across the USA: Occurrence, Susceptibility, and Data Limitations

Detailed information about landslide occurrence is the foundation for advancing process understanding, susceptibility mapping, and risk reduction. Despite the recent revolution in digital elevation data and remote sensing technologies, landslide mapping remains resource intensive. Consequently, a modern, comprehensive map of landslide occurrence across the United States (USA) has not been compiled. As a first step toward this goal, we present a national-scale compilation of existing, publicly available landslide inventories. This geodatabase can be downloaded in its entirety or viewed through an online, searchable map, with parsimonious attributes and direct links to the contributing sources with additional details. The mapped spatial pattern and concentration of landslides are consistent with prior characterization of susceptibility within the conterminous USA, with some notable exceptions on the West Coast. Although the database is evolving and known to be incomplete in many regions, it confirms that landslides do occur across the country, thus highlighting the importance of our national-scale assessment. The map illustrates regions where high-quality mapping has occurred and, in contrast, where additional resources could improve confidence in landslide characterization. For example, borders between states and other jurisdictions are quite apparent, indicating the variation in approaches to data collection by different agencies and disparity between the resources dedicated to landslide characterization. Further investigations are needed to better assess susceptibility and to determine whether regions with high relief and steep topography, but without mapped landslides, require further landslide inventory mapping. Overall, this map provides a new resource for accessing information about known landslides across the USA.

Landslide mapping↗

MO-E-18C-05: Global Health Catalyst: A Novel Platform for Enhancing Access to Medical Physics Education and Research Excellence (AMPERE)

Purpose: To develop a platform for catalyzing collaborative global Cancer Care Education and Research (CaRE), with a prime focus on enhancing Access to Medical Physics Education and Research Excellence (AMPERE) Methods: An analysis of over 50 global health collaborations between partners in the U.S. and low and middle income countries (LMIC) in Africa was carried out to assess the models of collaborations in Education and Research and relative success. A survey was carried out with questions including: the nature of the collaboration, how it was initiated, impact of culture and other factors, and recommendations for catalyzing/enhancing such collaborations. An online platform called Global Health Catalyst was developed for enhancing AMPERE. Results: The analysis yielded three main models for global health collaborations with survey providing key recommendations on how to enhance such collaborations. Based on this, the platform was developed, and customized to allow Medical Physicists and other Radiation oncology (RadOnc) professionals interested in participating in Global health to readily do so e.g. teach an online course module, participate in training Medical Physicists or other RadOnc health professionals in LMIC, co-mentor students, residents or postdocs, etc. The growing list of features on the platform also include: a feature to enable people to easily find each other, form teams, operate more effectively as partners from different disciplines, institutions, nations and cultural backgrounds, share tools and technologies, obtain seed funding to develop curricula and/or embark upon new areas of investigation, and participate in humanitarian outreach: remote treatment planning assistance, and participation in virtual Chart Rounds, etc. Conclusion: The developed Global Health Catalyst platform could enable any Medical Physicist or RadoOnc professional interested in global health to readily participate in the Education/training of next generation RadOnc professionals and global health leaders, and enhance AMPERE, especially for LMIC.

60 APPLIED LIFE SCIENCES↗

3-D MAPPING TECHNOLOGIES FOR HIGH LEVEL WASTE TANKS

This research investigated four techniques that could be applicable for mapping of solids remaining in radioactive waste tanks at the Savannah River Site: stereo vision, LIDAR, flash LIDAR, and Structure from Motion (SfM). Stereo vision is the least appropriate technique for the solids mapping application. Although the equipment cost is low and repackaging would be fairly simple, the algorithms to create a 3D image from stereo vision would require significant further development and may not even be applicable since stereo vision works by finding disparity in feature point locations from the images taken by the cameras. When minimal variation in visual texture exists for an area of interest, it becomes difficult for the software to detect correspondences for that object. SfM appears to be appropriate for solids mapping in waste tanks. However, equipment development would be required for positioning and movement of the camera in the tank space to enable capturing a sequence of images of the scene. Since SfM requires the identification of distinctive features and associates those features to their corresponding instantiations in the other image frames, mockup testing would be required to determine the applicability of SfM technology for mapping of waste in tanks. There may be too few features to track between image frame sequences to employ the SfM technology since uniform appearance may exist when viewing the remaining solids in the interior of the waste tanks. Although scanning LIDAR appears to be an adequate solution, the expense of the equipment ($80,000-$120,000) and the need for further development to allow tank deployment may prohibit utilizing this technology. The development would include repackaging of equipment to permit deployment through the 4-inch access ports and to keep the equipment relatively uncontaminated to allow use in additional tanks. 3D flash LIDAR has a number of advantages over stereo vision, scanning LIDAR, and SfM, including full frame time-of-flight data (3D image) collected with a single laser pulse, high frame rates, direct calculation of range, blur-free images without motion distortion, no need for precision scanning mechanisms, ability to combine 3D flash LIDAR with 2D cameras for 2D texture over 3D depth, and no moving parts. The major disadvantage of the 3D flash LIDAR camera is the cost of approximately $150,000, not including the software development time and repackaging of the camera for deployment in the waste tanks.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Connecting AmeriFlux to the Globe, Extending the Partnership with Global Flux Network FLUXNET

We propose a project that will extend and expand the activities and contributions of AmeriFlux, to the global stage by working with our international partners to continue operating and expand the functioning of global FLUXNET database. One goal is to produce the next-generation FLUXNET dataset. This will be an integrated dataset on carbon, water and energy fluxes, on meteorological conditions and on the structure and function of the ecosystems; we have to potential to construct a new database, double the size of the La Thuile dataset, with over 2000 site-years of trace gas flux measurements, and supporting meteorological and site meta-data from over 400 sites world-wide. The production of the next FLUXNET database is critical to the activities of this ROSE’s solicitation because these data will drive many of the carbon cycle synthesis activities and the model parameterization and validation activities. A second goal is to build the next-generation, data-system that will house, distribute and query data and discover new information by the broader biogeoscience user community. The third goal is to use these data in synthesis activities that improve our understanding on how climate, weather, ecological, physiological and soil factors govern the exchange of carbon, water and energy between vegetation and the atmosphere at multiple time and space scales. The fourth goal is to act as a coordinator of the project to recruit data, to organize a workshop/conference and to build a community of data sharing and interaction across vast cultural spectrum of participating scientists. The rationale for proposing this work is based on the fact that the vast databases that are produced by flux networks cannot perpetuate and evolve without continued support of the intellectual activities of scientists who produce data, expert in databases, and scientists who use data for modeling. The actuality of a flux network takes human intervention to recruit data from different countries and cultures, to build trust to share data in open-access format, to support data users, and to collaborate. Specifically, we will develop an updated data portal that is easy to navigate and conducive for distributing, visualization, evaluation and discovery of the multiple types of flux and environmental data and information. We will foster collaboration and interactions with our national and international partners and the recruitment of data by: 1) continuing the periodic publication of the newsletter, FLUXLETTER; 2) by hosting an international conference; 3) by coordinating and launching multi-investigator data synthesis activities; and 4) by developing tools that coordinate the development of research papers resulting from the dataset. Data products include raw and gap-filled data at their native time steps (30 minute averages), data products that are integrated on daily and annual time scales and value added products like ecosystem respiration and canopy photosynthesis. Uncertainty analysis and quality control metrics will be produced in coordination with AmeriFlux and ICOS. We will also work with colleagues to expand the scope of FLUXNET beyond carbon dioxide and water vapor, and start archiving the growing methane flux databases that are being collected, world-wide. The interpretation of the flux data relies on good meta-data. We will work with data providers to populate and expand the meta-data archives. We will also work with collaborators to incorporate data from remote sensing products such as MODIS and Landsat, from corresponding climate and weather stations. Another goal is to incorporate new data on canopy structure, with recent LIDAR acquisitions, to populate the data archive with automated soil respiration and understory flux measurements, where available and local climate records for corresponding sites. And, we will collaborate with the TRY database, by merging flux data with plant trait information.

54 ENVIRONMENTAL SCIENCES↗

National Scientific User Facility Purpose and Capabilities

The U.S. Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007. This designation allows the ATR to become a cornerstone of nuclear energy research and development (R&D) within the U.S. by making it easier for universities, the commercial power industry, other national laboratories, and international organizations to conduct nuclear energy R&D. The mission of the ATR NSUF is to provide nuclear energy researchers access to world-class facilities, thereby facilitating the advancement of nuclear science and technology within the U.S. In support of this mission, hot cell laboratories are being upgraded. These upgrades include a set of lead shielded cells that will house Irradiated Assisted Stress Corrosion Cracking (IASCC) test rigs and construction of a shielded laboratory facility. A primary function of this shielded laboratory is to provide a state of the art type laboratory facility that is functional, efficient and flexible that is dedicated to the analysis and characterization of nuclear and non-nuclear materials. The facility shall be relatively easy to reconfigure to provide laboratory scale hot cave space for housing current and future nuclear material scientific research instruments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A graphical, rule based robotic interface system

The ability of a human to take control of a robotic system is essential in any use of robots in space in order to handle unforeseen changes in the robot's work environment or scheduled tasks. But in cases in which the work environment is known, a human controlling a robot's every move by remote control is both time consuming and frustrating. A system is needed in which the user can give the robotic system commands to perform tasks but need not tell the system how. To be useful, this system should be able to plan and perform the tasks faster than a telerobotic system. The interface between the user and the robot system must be natural and meaningful to the user. A high level user interface program under development at the University of Alabama, Huntsville, is described. A graphical interface is proposed in which the user selects objects to be manipulated by selecting representations of the object on projections of a 3-D model of the work environment. The user may move in the work environment by changing the viewpoint of the projections. The interface uses a rule based program to transform user selection of items on a graphics display of the robot's work environment into commands for the robot. The program first determines if the desired task is possible given the abilities of the robot and any constraints on the object. If the task is possible, the program determines what movements the robot needs to make to perform the task. The movements are transformed into commands for the robot. The information defining the robot, the work environment, and how objects may be moved is stored in a set of data bases accessible to the program and displayable to the user.

Mckee, James W.↗

Innovative Advanced Hydrogen Mobile Fueler (Final Technical Report)

The US Department of Energy (DOE) funded a project to design, develop, deploy and analyze the economic viability of an innovative Advanced Hydrogen Mobile Fueler (AHMF). As part of the design activity the project team defined specifications based upon vehicle requirements and compliance with specific fueling performance criteria. The AHMF was originally designed to fuel 10-20 fuel cell vehicles (FCV) per day, consistent with the requirements of the H70 fueling category. The AHMF is able to operate without remote power connections, is modular for easy transport and deployment, and can provide expanded daily capacity and multi-day operations using delivered gaseous hydrogen. Toward the end of the project, due to request from the hydrogen industry and some necessary modifications of the AHMF, the system is now modified to fuel heavy duty vehicles. The project was conducted over two primary phases, each including several key tasks, subtasks, and project milestones. Phase 1 involved the design, development, and construction of the AHMF, moving from a conceptual design through to completion of assembly and testing. In addition to reviewing several different approaches, the team chose to take a conventional station design and modify it for mobile fueling. There were several innovative components included in the design. The high pressure storage was the first to achieve a US Department of Energy (DOE) Special Permit (SP 20391) to transport high pressure hydrogen (95 MPa) in a composite cylinder. The second novel system was a liquid nitrogen (LIN) cooling system with a compact heat exchanger. Without this change, the cooling system would not be able to fit into the AHMF. Phase 2 demonstrated the AHMF by fueling fuel cell buses at a fleet in Pomona, CA. The site was chosen because a temporary fueling solution was required while a fixed station was being installed. The existing permits for the fixed station and non-public access also was a determining factor. Over two months, the buses were fueled 320 times with over 5000 kg of hydrogen from tube trailers. Existing shore power was used, and the average electrical efficiency was 0.13 kWh/kg. The average liquid nitrogen (LIN) consumption was 90.68 scf/kg. The fueling and consumption data was provided to the National Renewable Energy Laboratory (NREL) for analysis. An economic analysis was performed and will be provided in a separate report. The project was successful, but not without challenges and lessons learned. The DOT special permit led the way for the use of high pressure, composite cylinders and is being by multiple other systems and applications. The pandemic along with time for the DOT special permit approval delayed the project for years. The team also believes that hydrogen mobile fueling has a use for the industry, especially during this upcoming phase of expansion. However, it does have its limitations due to high cost to build and operate, and the same permitting challenges as a fixed station. A fully capable system at the speeds and pressures of the AHMF may not be necessary for most applications and would help reduce the cost and increase storage capacity. The on-board generator can be easily replaced with shore power or the wide range of power generation solutions in the marketplace. One of the major results of the project was the development of new code language in National Fire Protection Agency (NFPA) 2 and the International Fire Code (IFC) for on-demand mobile fueling. This will provide guidance for Authorities Having Jurisdiction (AHJ) and user on how to permit temporary fueling sites across the nation.

08 HYDROGEN↗