Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inverse methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Quantifying uncertainty in analysis of shockless dynamic compression experiments on platinum. II. Bayesian model calibration

Dynamic shockless compression experiments provide the ability to explore material behavior at extreme pressures but relatively low temperatures. Typically, the data from these types of experiments are interpreted through an analytic method called Lagrangian analysis. Here, in this work, alternative analysis methods are explored using modern statistical methods. Specifically, Bayesian model calibration is applied to a new set of platinum data shocklessly compressed to 570 GPa. Several platinum equation-of-state models are evaluated, including traditional parametric forms as well as a novel non-parametric model concept. The results are compared to those in Paper I obtained by inverse Lagrangian analysis. The comparisons suggest that Bayesian calibration is not only a viable framework for precise quantification of the compression path, but also reveals insights pertaining to trade-offs surrounding model form selection, sensitivities of the relevant experimental uncertainties, and assumptions and limitations within Lagrangian analysis. The non-parametric model method, in particular, is found to give precise unbiased results and is expected to be useful over a wide range of applications. The calibration results in estimates of the platinum principal isentrope over the full range of experimental pressures to a standard error of 1.6%, which extends the results from Paper I while maintaining the high precision required for the platinum pressure standard.

Brown, Justin Lee↗
NASA NTRS1981

Heat flux estimates over vegetation derived using radiometric surface temperatures and a boundary layer model in comparison with sodar-derived values

An attempt was made to validate a method that uses radiometric surface temperatures and a boundary layer model to estimate surface energy budgets and characteristics. Surface temperatures from a hand-held radiometer and sodar data were collected simultaneously on seven days between mid-July and mid-October 1980. The comparison of the RDMS and sodar heat fluxes proved disappointing. Free convection conditions, required to produce sodar-derived heat fluxes, were inhibited by a terrain-induced low level inversion. Only three out of seven cases produced meaningful sodar heat fluxes. Of those three cases, one had good agreement and the other two had sodar heat fluxes 15 to 45 w/sq m lower than the RDMS values. Since the RDMS method is relatively untested, it was impossible to conclusively determine its validity from the results. There was evidence that the true heat flux was not underestimated by the RDMS, so it could be concluded that the Bowen ratios over well-watered vegetation were likely to be quite small.

Cooper, J. N.↗
NASA NTRS1976

Inverse transonic airfoil design including viscous interaction

A numerical technique was developed for the analysis of specified transonic airfoils or for the design of airfoils having a prescribed pressure distribution, including the effect of weak viscous interaction. The method uses the full potential equation, a stretched Cartesian coordinate system, and the Nash-MacDonald turbulent boundary layer method. Comparisons with experimental data for typical transonic airfoils show excellent agreement. An example shows the application of the method to design a thick aft-cambered airfoil, and the effects of viscous interaction on its performance are discussed.

Carlson, L. A.↗
DOE OSTI2021

Solving inverse problems in stochastic models using deep neural networks and adversarial training

Inverse problems associated with stochastic models constitute a significant portion of scientific and engineering applications. In such cases the unknown quantities are distributions. The applicability of traditional methods is limited because of their demanding assumptions or prohibitive computational consumption; for example, maximum likelihood methods require closed-form density functions, and Markov Chain Monte Carlo needs a large number of simulations. We propose a new method that estimates the unknown distribution by matching the statistical properties between observed and simulated random processes. We leverage the expressive power of neural networks to approximate the unknown distribution and use a discriminative neural network for computing the statistical discrepancies between the observed and simulated random processes. Here we demonstrated numerically that the proposed methods can estimate both the model parameters and learn complicated unknown distributions.

42 ENGINEERING↗
DOE OSTI2021

Learning viscoelasticity models from indirect data using deep neural networks

In this study, we propose a novel approach to model viscoelasticity materials, where rate-dependent and non-linear constitutive relationships are approximated with deep neural networks. We assume that inputs and outputs of the neural networks are not directly observable, and therefore common training techniques with input–output pairs for the neural networks are inapplicable. To that end, we develop a novel computational approach to both calibrate parametric and learn neural-network-based constitutive relations of viscoelasticity materials from indirect displacement data in the context of multiple-physics systems. We show that limited displacement data holds sufficient information to quantify the viscoelasticity behavior. We formulate the inverse computation – modeling viscoelasticity properties from observed displacement data – as a PDE-constrained optimization problem and minimize the error functional using a gradient-based optimization method. The gradients are computed by a combination of automatic differentiation and implicit function differentiation rules. The effectiveness of our method is demonstrated through numerous benchmark problems in geomechanics and porous media transport.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Optimization of transformer ratio and beam loading in a plasma wakefield accelerator with a structure-exploiting algorithm

Plasma-based acceleration has emerged as a promising candidate as an accelerator technology for a future linear collider or a next-generation light source. We consider the plasma wakefield accelerator (PWFA) concept where a plasma wave wake is excited by a particle beam and a trailing beam surfs on the wake. For a linear collider, the energy transfer efficiency from the drive beam to the wake and from the wake to the trailing beam must be large, while the emittance and energy spread of the trailing bunch must be preserved. One way to simultaneously achieve this when accelerating electrons is to use longitudinally shaped bunches and nonlinear wakes. In the linear regime, there is an analytical formalism to obtain the optimal shapes. In the nonlinear regime, however, the optimal shape of the driver to maximize the energy transfer efficiency cannot be precisely obtained because currently no theory describes the wake structure and excitation process for all degrees of nonlinearity. In addition, the ion channel radius is not well defined at the front of the wake where the plasma electrons are not fully blown out by the drive beam. We present results using a novel optimization method to effectively determine a current profile for the drive and trailing beam in PWFA that provides low energy spread, low emittance, and high acceleration efficiency. We parameterize the longitudinal beam current profile as a piecewise-linear function and define optimization objectives. For the trailing beam, the algorithm converges quickly to a nearly inverse trapezoidal trailing beam current profile similar to that predicted by the ultrarelativistic limit of the nonlinear wakefield theory. For the drive beam, the beam profile found by the optimization in the nonlinear regime that maximizes the transformer ratio also resembles that predicted by linear theory. Furthermore, the current profiles found from the optimization method provide higher transformer ratios compared with the linear ramp predicted by the relativistic limit of the nonlinear theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Eigenvalues of singular differential operators by finite difference methods. II.

Note is made of an earlier paper which defined finite difference operators for the Hilbert space L2(m), and gave the eigenvalues for these operators. The present work examines eigenvalues for higher order singular differential operators by using finite difference methods. The two self-adjoint operators investigated are defined by a particular value in the same Hilbert space, L2(m), and are strictly positive with compact inverses. A class of finite difference operators is considered, with the idea of application to the theory of Toeplitz matrices. The approximating operators consist of a good approximation plus a perturbing operator.

Baxley, J. V.↗
NASA NTRS1983

Application of a viscous-inviscid interaction procedure to predict separated flows with heat transfer

A viscous-inviscid interaction procedure is described for predicting heat transfer in separated flows. The separating flow in a rearward-facing step/asymmetric channel expansion is considered. For viscous regions, the boundary-layer momentum and continuity equations are solved inversely in a coupled manner by a finite-difference numerical scheme. The streamwise convective term is altered to permit marching the solution through regions of reversed flow. The inviscid flow is computed by numerically solving the Laplace equation for stream-function in the region bounded by the displacement surfaces used in the inverse boundary-layer solution. The viscous and inviscid solutions are repeated iteratively until the edge velocities obtained from both solutions are in agreement. Predictions using this method compare favorably with experimental data and other predictions.

Hall, E. J.↗
NASA NTRS1986

Analysis of harmonic spline gravity models for Venus and Mars

Methodology utilizing harmonic splines for determining the true gravity field from Line-Of-Sight (LOS) acceleration data from planetary spacecraft missions was tested. As is well known, the LOS data incorporate errors in the zero reference level that appear to be inherent in the processing procedure used to obtain the LOS vectors. The proposed method offers a solution to this problem. The harmonic spline program was converted from the VAX 11/780 to the Ridge 32C computer. The problem with the matrix inversion routine that improved inversion of the data matrices used in the Optimum Estimate program for global Earth studies was solved. The problem of obtaining a successful matrix inversion for a single rev supplemented by data for the two adjacent revs still remains.

Bowin, Carl↗
NASA NTRS1987

Nonlinear steady-state response of a rotor-support system

A numerical method is presented to determine the steady-state nonlinear response of a rotor-support system due to deadband and rubbing using discrete Fourier transformation and inverse discrete Fourier transformation. Damaging subharmonic and superharmonic responses are found to occur in presence of a side force. The calculated results agree with the general trends which have been observed experimentally by other investigators. The effects of selected nondimensionalized parameters on rotor response are studied.

Noah, Sherif T.↗
NASA NTRS1989

Simplified Linear Multivariable Control Of Robots

Simplified method developed to design control system that makes joints of robot follow reference trajectories. Generic design includes independent multivariable feedforward and feedback controllers. Feedforward controller based on inverse of linearized model of dynamics of robot and implements control law that contains only proportional and first and second derivatives of reference trajectories with respect to time. Feedback controller, which implements control law of proportional, first-derivative, and integral terms, makes tracking errors converge toward zero as time passes.

Seraji, Homayoun↗
NASA NTRS1995

Radiative transfer in a semiinfinite medium with a specularly reflecting boundary

A consistent solution of the radiative transfer equation characterizing photon transport in a semi-infinite medium of refractive index greater than or equal to one is obtained following the method of Sobolev. Fresnel specular reflection, Snell's law and isotropic scattering are assumed. An algorithm is developed and its accuracy is demonstrated. A numerical Laplace transform inversion leads to an efficient evaluation for the interior flux and source function distributions.

Ganapol, B. D.↗
DOE OSTI2025

Coefficient-to-Basis Network: a fine-tunable operator learning framework for inverse problems with adaptive discretizations and theoretical guarantees

We propose a Coefficient-to-Basis Network (C2BNet), a novel framework for solving inverse problems within the operator learning paradigm. C2BNet efficiently adapts to different discretizations through fine-tuning, using a pre-trained model to significantly reduce computational cost while maintaining high accuracy. Unlike traditional approaches that require retraining from scratch for new discretizations, our method enables seamless adaptation without sacrificing predictive performance. Furthermore, we establish theoretical approximation and generalization error bounds for C2BNet by exploiting low-dimensional structures in the underlying datasets. Our analysis demonstrates that C2BNet adapts to low-dimensional structures without relying on explicit encoding mechanisms, highlighting its robustness and efficiency. To validate our theoretical findings, we conducted extensive numerical experiments that showcase the superior performance of C2BNet on several inverse problems. The results confirm that C2BNet effectively balances computational efficiency and accuracy, making it a promising tool to solve inverse problems in scientific computing and engineering applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Three-dimensional Skyrme Hartree-Fock-Bogoliubov solver in coordinate-space representation

The coordinate-space representation of the Hartree-Fock-Bogoliubov theory is the method of choice to study weakly bound nuclei whose properties are affected by the quasiparticle continuum space. To describe such systems, we developed a three-dimensional Skyrme-Hartree-Fock-Bogoliubov solver HFBFFT based on the existing, highly optimized and parallelized Skyrme-Hartree-Fock code Sky3D. The code does not impose any self-consistent spatial symmetries such as mirror inversions or parity. The underlying equations are solved in HFBFFT directly in the canonical basis using the fast Fourier transform. To remedy the problems with pairing collapse, we implemented the soft energy cutoff and pairing annealing. The convergence of HFB solutions was improved by a sub-iteration method. The Hermiticity violation of differential operators brought by Fourier-transform-based differentiation has also been solved. Furthermore, the accuracy and performance of HFBFFT were tested by benchmarking it against other HFB codes, both spherical and deformed, for a set of nuclei, both well-bound and weakly-bound.

3D coordinate-space representation↗
NASA NTRS1996

Quasi-Optimal Schwarz Methods for the Conforming Spectral Element Discretization

Fast methods are proposed for solving the system K(sub N)x = b resulting from the discretization of self-adjoint elliptic equations in three dimensional domains by the spectral element method. The domain is decomposed into hexahedral elements, and in each of these elements the discretization space is formed by polynomials of degree N in each variable. Gauss-Lobatto-Legendre (GLL) quadrature rules replace the integrals in the Galerkin formulation. This system is solved by the preconditioned conjugate gradients method. The conforming finite element space on the GLL mesh consisting of piecewise Q(sub 1) elements produces a stiffness matrix K(sub h) that is spectrally equivalent to the spectral element stiffness matrix K(sub N). The action of the inverse of K(sub h) is expensive for large problems, and is therefore replaced by a Schwarz preconditioner B(sub h) of this finite element stiffness matrix. The preconditioned operator then becomes B(sub h)(exp -l)K(sub N). The technical difficulties stem from the nonregularity of the mesh. Tools to estimate the convergence of a large class of new iterative substructuring and overlapping Schwarz preconditioners are developed. This technique also provides a new analysis for an iterative substructuring method proposed by Pavarino and Widlund for the spectral element discretization.

Casarin, Mario↗
DOE OSTI2025

Orphaned oil and gas well methane emission rates quantified using Gaussian plume inversions of ambient observations

Abstract. Annually, ∼ 3.6 million abandoned oil and gas wells in the US emit a combined ∼ 2.6 Tg methane (CH4), adversely affecting climate and regional air quality. However, these estimates depend on emission factors derived from measuring subpopulations of wells that vary by orders of magnitude due to very limited field sampling and poorly characterized distributions. Currently, US protocols to remediate orphaned wells lacks standardized quantification methods needed to both prioritize plugging and account for emission reductions. Therefore, sensitive, reliable, affordable, and scalable CH4 flux quantification methods are needed. We report the use of a simple Gaussian plume method where the dispersion parameters are constrained by in situ ground measurements of CH4 concentration at four locations 7.5–49 m downwind of the orphan well as well as local winds to estimate the leak rate from an orphan well. We derive a flux of 10.53 ± 1.16 kg CH4 h−1 during a venting procedure in April 2023 that agrees with the directly measured volumetric flow rate of 9.00 ± 0.25 kg CH4 h−1. This is 71 % greater than the 5.3 kg CH4 h−1 flux measured 7 months prior. Additionally, we discovered a secondary leak through the surface casing inferred as 0.43–0.67 kg CH4 h−1 both by our ground Gaussian analysis and by transecting the plume with an uncrewed aerial system (UAS). We show that in situ determination of the dispersion parameters used in our Gaussian inversions allows us to measure methane emissions to 15 % accuracy, significantly reducing errors when compared to the standard practice of assuming stability class. Our results help develop simpler methods and protocols for robust orphan well emission quantification that can be used for reporting.

Follansbee, Emily↗
NASA NTRS1977

Inversion of infrared limb emission measurements for temperature and trace gas concentrations

Limb emission measurements are characterized by sharp weighting functions at high altitudes, and for temperature determinations, strongly nonlinear dependence of the weighting function on the temperature. Several methods for inverting this type of measurement have been described and used, including iterative, statistical, nonlinear and approximate direct approaches. These approaches are described and advantages and disadvantages of each are outlined.

Gille, J. C.↗
NASA NTRS1988

Development of automation and robotics for space via computer graphic simulation methods

A robot simulation system, has been developed to perform automation and robotics system design studies. The system uses a procedure-oriented solid modeling language to produce a model of the robotic mechanism. The simulator generates the kinematics, inverse kinematics, dynamics, control, and real-time graphic simulations needed to evaluate the performance of the model. Simulation examples are presented, including simulation of the Space Station and the design of telerobotics for the Orbital Maneuvering Vehicle.

Fernandez, Ken↗